Re: Satellite A200-1BQ, not responding after screen saver

Hi, I have a Satellite A200, Windows 7 32 bits OS. When running the screen saver the PC stop responding. Have to switch of because no response.
If you have report the some problem please send.

Hi
Does this mean that Windows 7 hangs and does not response only when the screen saver has been enabled?
Did you notice the same issue using Win XP or Win Vista?
If not then this notebook behavior could be related only to Win 7 and I think it could caused by graphic card driver
Remove the graphic driver which you have installed and test the screen saver using the windows 7 common driver
It would be interesting to know what happens

Similar Messages

  • Satellite Pro A200 - Wifi not responding after loading of Win XP

    Hi there, i`m new here and I apologies if this has been covered,i have searched the forum but came up with nothing.
    I have a:
    Satellite pro a200
    Windows XP.
    My laptop had xp professional installed and the onboard wifi was working.
    I had issues with the laptop overall but the wifi worked. I formatted it last night, installed a new copy of xp home and now the wifi doesnt appear to be recognised. The light is on ,on the switch but i cant seem to get the laptop to recognise its there.
    I havent given you much I know but I hope I can get it sorted.
    Any questions you may have i will try and answer with as much info as possible.
    Thanks, Kirky.

    Hello, thanks for the advice.
    I have flashed the bios and also installed the latest driver. Now I can see my home network but the notebook now wants a WEP Key to continue. In the last few weeks i have connected 2 xboxs and 2 mobile phones to this network without any issues. Now I want to connect a notebook it is asking for this key and I don`t know what it is, or where to locate it.
    Thanks, Kirky.

  • Quicktime application not responding after screen recording.

    After taping video gameplay of a heavily modded Fallout: New Vegas, pressing the stop button makes the application stop responding altogether. Causing me to force quit as it saves only a couple seconds.  It worked for awhile for about four recordings and after upgrading the graphics in the game, it just doesn't want to help anymore. This is frustrating and needs a fix as soon as possible. this is maddeningly frustrating. There are no fixes, no manuals on a fix, no upgrades. This needs to be remedied now.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Additional monitor hdmi not working after screen saver

    I have an additional HDMI monitor attached to my macbook air.
    after the screensaver is activated, the monitor is no switching on again, so I have to unplug and plug physically the get it reactivated

    Problem fixed by resetting the SMC.
    Close all applications
    Shut down the computer
    Unplug all peripherals
    Unplug power source, wait for 30 seconds
    Plug power source back in (mine shows green light then red, shows it is charging)
    Press the shift, control, option, power (I see power cord light goes to green again, and then red, sort of indicating that SMC has been reset)

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Anyone experiencing Mail.app in fullscreen not responding after screensaver?

    Hello all!
    I did a quick search in the forum but found nothing related.  I am noticing that my Mail.app that is in fullscreen is not responding to mouse clicks (ie I can't click on Inbox) after screen saver has started.  I don't know if time plays a role however I am noticing the issue after 15 mins, my break.  Anyone experiencing the same?
    ~Gregory

    I have proven that the problem is being caused by the Software Update HT204210.
    I went and purchased new iMac (LOADED) biggest, best iMac I could buy.  New iMac has the most recent versions of softwares and OS, EXCEPT the latest update, Software Update HT204210.
    System ran perfectly.  Email was working as designed.  No hangs ups, no errors.
    Then the automatic Software Update ran last night (03/02/15) and installed Software Update HT204210.  Now today 03/03/15 the system hangs and Mail stops responding.
    APPLE SOFTWARE ENGINEERS -  here it is, viable proof that the Software Update HT204210 is causing this issue.  FIX IT !

  • Aperture not responding after loading

    The program will load- I get to the initial screen- but will not respond after I pick an operation. I tried "time machine" and restored from "backup". Neither one worked. I can access my pictures; I just cannot get the program to operate.
    Aperture is showing up top, next to the "apple" but that is all. I then get the "beach ball". I have to force close to get it to stop.
    The only thing I remember doing since I used it last was to empty the trash to free up some space.
    Any suggestions?

    Try temporary rename/move aperature library to check is problem in the particular library or in aperture installation. If AP will start, then you will need to repair/rebuild library; otherwise you will need to re-install AP. Btw, as far as I remember Apple strongly recommend do not use Time Machine with AP.

  • My iphone 4 isn not responding the screen is just showing a usb lead and the itunes symbol. When i plug it into my desktop mac and link it to itunes ,itunes is telling me the phone is in a restore mode .can i get it to respond without restoring ?

    my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks

    http://support.apple.com/kb/HT1808
    You can't  not restore if you have reached this point

  • When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

    Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • When receiving email, Thunderbird freezes and displays "Not Responding" in screen header. Adds popstate folder to account.

    I'm running Thunderbird 31.6.0 on Windows 8.1 with BitDefender 2013.
    PROBLEM:
    When getting email, Thunderbird freezes and displays "Not Responding" in screen header.
    When TB is closed then reopened, a popstate folder (popstate-1.dat) is added to account. A new popstate folder appears with each crash/freeze, and as long as they are not deleted, they pile up with unique numbers (popstate-1.dat, popstate-2.dat, etc.).
    (see attached screenshot)
    NOTE: I've included troubleshooting details below for all the fixes I tried, thinking it might be helpful to anyone who has a similar problem and is thinking about going down those paths. Ultimately, it seems that FIX ATTEMPT 5 is the winner.
    ==================================
    FIX ATTEMPT 1:
    Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1026288, I restarted Thunderbird in Safe Mode (Help > Restart with Add-Ons disabled...), checking the "Disable all add-ons" and "Reset toolbars and controls" and clicking "Make Changes and Restart" button.
    In Add-Ons Manager, BitDefender Toolbar now appears to be disabled.
    (see attached screenshot)
    But the problem persists.
    FIX ATTEMPT 2:
    Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1016811, I clicked Help > Troubleshooting Information > Show Folder button. This opens a File Explorer window for 3I58b9dq.default (this is the "profile" folder) which contains panacea.dat and folderTree.json files.
    I changed file names to panacea-changed.dat and folderTree-changed.json (rather than deleting them, in case I need to restore them), and I reopened Thunderbird.
    This did not solve the problem -- and, furthermore, the profile folder seems to have automatically generated new panacea.dat and folderTree.json files to replace those for which I changed the filenames.
    FIX ATTEMPT 3:
    Following the suggestion in this mozilla support post: https://support.mozilla.org/en-US/questions/1044774, I restarted Windows 8.1 in safe mode with networking enabled (using these instructions: http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/.)
    TB does not crash when Windows runs in safe mode, but the aspect ratio of my display is distorted; everything's really big and stretched horizontally, and my two displays are mirrored rather than extended. Running Windows perpetually in safe mode is not the ideal fix.
    QUESTION 1: I understand that troubleshooting is supposedly done best in safe mode — What might I do in safe mode to diagnose the Thunderbird problem?
    FIX ATTEMPT 4:
    This article https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#Symptoms, suggests that problems with Thunderbird associated with BitDefender can be solved by uninstalling and re-installing BitDefender.
    Not really comfortable uninstalling and re-installing, I disabled Bitdefender (Settings button > Antivirus button > Shield tab > On-Access Scanning toggle Off) to see if that would work. It did not fix the problem.
    QUESTION 2: Would uninstalling BitDefender be any different than disabling it?
    FIX ATTEMPT 5:
    Create a Bitdefender Exclusion for the Thunderbird folder:
    Settings button > Antivirus button > Exclusions tab > Excluded files and folders link > Add button > navigate to Thunderbird folder (c:\users\username\appdata\roaming\thunderbird) > Both radio button > Add button > OK button
    THIS FIX DID THE TRICK! YAY!

    FIX ATTEMPT #5 above did the trick, and now I see that it was the chosen solution for a similar post of the same problem at https://support.mozilla.org/en-US/questions/1044774

  • App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

    My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
    Also I tried to reboot and restart and nothing happens still unresponsive.
    Tried to click as many times as I can the App Store and it won't open.
    Please Help.

    Dongski
    I had the same problem and solved it myself.
    Please see discussion  https://discussions.apple.com/message/23556072#23556072
    Hope it helps

  • HT3180 My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    Unplug it from power, wait 10-15 seconds and plug it back in.
    If it does not power up properly at that point, restore it via iTunes on the computer.

  • My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

    I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

    Mylenium
    Thank you for the suggestions.
    I checked the WIndows log files. It reported the following error:
    The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 4770
    Start Time: 01d0079a09bba381
    Termination Time: 13
    Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
    Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
    I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
    Thank you.

  • Premiere Pro CS6 not responding after adding anything to timeline

    I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything.  I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding.  It's frustrating because the program used to work fine before.
    The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks.  I have a late 2008 MacBook Pro.
    Thanks in advance for the help.

    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

  • Garageband not responding after upgrade to MacOS 10.5.8

    Garageband is not responding after an upgrade from Mac 10.4 to 10.5.8. how can I fix this

    Hello,
    Do you have some Sound amplifying App installed?
    If so remove it & reboot.

Maybe you are looking for