Re: Satellite A200-1MY: XP sound driver does not work

Hello,
I have a problem concerning my sound driver ( I use windows XP) . I installed all the xp drivers and it still doesn't work.
Can anyone tell me where to get a working driver ?
Thanks.

I hope you use WXP SP2. Anyway check please this thread. Try to use instruction given by Eldorado.

Similar Messages

Satellite P105 mat****a dvd drive does not work with Win 7

Greetings,
I need an upgrade on my dvd for my vintage Satellite P105.
I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
2) So, my question to the mavens of multimedia is: What should be my next move?
3) Should I go external and face the USB bottle neck or
4) go for the bus speed on the internal dvd?
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Of course, if you could give me a model number and direct me to sales it would be much appreciated.
Thank you all in advance.
Rachel_1

1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
Makes sense
2) So, my question to the mavens of multimedia is: What should be my next move?
As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
3) Should I go external and face the USB bottle neck or
External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
4) go for the bus speed on the internal dvd?
If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
e
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thank you for your prompt reply. Could you comment on my questions add to your message?
Rachel

Satellite P105 - DVD/CD ROM drive does not work

The DVD/CD ROM drive on my P105 does not work at all. I've tried the registry fix for the upper/lower limit thing - didn't fix the problem. The drive does have power, does spin a disk, but it is not recognized by the system. It doesn't show up in the device manager at all. I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!). Thanks for any and all suggestions on hot to fix this problem.

Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_gen&message.id=3357&query.id=176774#...
Cheers!
D.Lex

Satellite A200-AH5 CD/DVD drive does not burn any CDs

I own a Toshiba Satellite laptop (A200 -AH3) running Windows Vista Home Premium.
For what it is worth, the processor is a T2085 @ 1.73 GHz. It is a 32-bit Operating System.
In Device Manager when I click on DVD/CD Rom drives, I get TSSTcorp CD/DVDW TS-L632D ATA Device.
Clicking on this I find that the driver is working properly and up to date. I have not been able to burn a CD on this system...
I have not tried to burn a DVD.
I have run through all the steps for burning a CD, however, but even though it goes through the process of showing the progress as each song from a playlist is burned to disc, when the disc is supposedly finalized...there is nothing on the disc when I try to play it back and with the exception of iTunes or another program opening when I place the CD into the drive to be played, absolutely nothing happens.
I tried burning music on a disc on my sister's desktop computer and it burned fine.
So...It is not a problem with the discs.
When I took the disc my sister had burned and placed it in the disc drive on my laptop, it displayed the tracks that had been burned and it played the music just fine. This has me really thrown for a loop.
The laptop is only a year old and I can't burn a single thing.
Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I have no idea if it will burn a DVD, but I have ruined 2 boxes of CD-R discs already. After the disc has supposedly burned the music...even though no music has been burned...the disc is ruined and has to be tossed.
I am not terribly knowledgeable about techncal aspects of computers, so I hope you can speak to me in general terminology if you respond to my problem. I really hope someone out there can advise me as to what is going on or what I should do to resolve the problem.
Thanks for any help in advance!
Thanks.
Gord
Canada

Hi
In your case I would recommend trying different CDs from different manufacturers.
You should know that not all CDs or DVDs would be fully compatible with your internal CD/DVD drive.
In many cases not compatible CD or DVD would cause exactly the same issues which you have described in your message so try different medias!
Furthermore I would recommend checking the Toshiba driver page for an CD/DVD drives firmware update.
As Im not mistaken the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for some new firmware. Maybe a new firmware is available
Last but not least you could switch to other burning software Im using the Nero In my opinion its the best applications for such purposes

Satellite L955-10K - Synaptics Touchpad Driver does not work properly

Hello, ASRR here.
I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
The cursor moves, and works fine but the gestures don't.
When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
I really do not know what to do. Could somebody PLEASE help?
My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
Any help would be greatly appreciated. Thanks

>One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
Back to the Synaptics touchpad driver.
Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
http://www.synaptics.com/en/drivers.php

Tecra 9000: After SP2 installation the Yamaha sound driver does not work

Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
Hugo

Hi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck

Satellite M30X: DVD/CD rom drive does not work

Hi,
Hope someone can help. The above drive will not now recognise any inserted media. It whirrs for a while then stops. I have cleaned the lens and also run through the support and diagnostic tests and they cannot help me any further.
I have also reinstalled the driver but no joy.
Does this mean a new DVD/cd drive is required?
Is it removable from the laptop and easily replaced?
Where would i get the part - M****a DVD ROM UJ- 82OS ?
How much would this cost?
Thanks to all for any suggestions???
Jim

Hi,
I had the same problem as you and I had to send mine for repair and they replaced it for me. My drive, same model as yours would not burn DVD's.
Installing is quite easy:
I HOLD NO RESPONSIBILITY FOR ANY DAMAGE DONE
1. Turn the unit up-side down
2. Remove every screw except the one securing the Hard-Drive, Memory Module and the one under the battery.
3. Now get a Pin or a Straightened out Paper-Clip and push the Pin/Paper-Clip into the small hole of the DVD-Driveand slowly pull the drive out.
4. Nearly there, Now you need to put your new DVD-Drive upside down because you have the unit is upside down as well.
5. Once you have done that, you need to put all the screws back in place.
6. DONE!
Hope this helps
machanic

Sound driver does not work after reinstalling XP on Tecra M9

Hi,
After lot's of fighting i've given up. It's just been imposible to get my sound card up a running on my TECRA M9 PTM91E, after i decided to give it a clean up by formating the disk entirely. My proceedure goes as follows:
1. Installed WINDOWS XP SP2
2. Downloaded of all drivers on another pc. Downloads from toshiba's official driver site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
3. Installed drivers in correct order following instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
4. No luck when attempting to install sound card driver (download page specifies an integrated realtek) tried following version first: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
5. Messed around trying older drivers from other TECRA M Series laptops, no luck either.
6. Decided sound card just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. Tried those but got back a non recognition alert.
Has anyone had this problem as well? My best guess it's just might be a problem about the driver version...

Yes, I have exactly the same problem.
We are building our master unit and we *must* do a install from bare metal of all the software. We do an automated provisioning for the rest of our massive purchase.
We have build a custom version of the Windows XP SP2 installation CD (with disk and chipset drivers injected). It has been working ok.
We have installed all the software drivers using the same procedure as yours (in the order proposed in install.txt).
The only thing that has failed is the sound.
This is the first place we ask for a solution. I hope we will have an answer (from toshiba) soon.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

CD/DVD drive does not work after Win 8 intsallation

from a month i've updated my windows into windows 8, everything is working great but the DVD-RW .
When i put empty cd and try to open it, it gives me error while opening saying:
"windows was unable to complete the format"
So is that a software or a hardware problem?!
waiting for the help !

Does this mean that your CD/DVD drive does not work anymore and is not recognized by system?
If yes, then I would recommend checking this Toshiba document which I found on the knowledge base portal webpage:
+Why does my CD/DVD Drive not work after upgrading to Windows 8?+
http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
You will need to uninstall the Toshiba programs:
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator

Satellite A210-131 sound driver does not support DirectSound input

Starting Premiere Pro CS3 , an error message appears:
- "Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge" Es ist keine Audioaufnahme moeglich".
- "The installed sound card driver does not support the DirectSound input. The Sound recording is not possible"
Please help me to find a working driver. Operating system is Windows Visat Ulimate.
Thank you
Siegwin

Hi
In my personal knowledge the DirectSound is an addition to Microsoft's DirectX system. It should be included in the DirectX.
Please check if you have installed the newest version of DirectX 9C.
Furthermore I would recommend updating the sound driver. On the Toshiba page you could find the latest two versions of Realtek sound dirver;
- 6.0.1.5374
- 6.0.1.5406
If both will not support the DirectSound input try another one from the Realtek homepage.
The chip is called Realtek ALC268

Satellite L500-126 - CD/DVD drive does not open very smoothly

Hi,
I just got my second Satelite L500-126.
I exchanged my first one for a new one because the ESC key got stuck sometimes and made a squeaking sound.
Now with my new one, I noticed that my dvd drive does not open very smoothly and 2 little silver metal bars come out with the drive when I open it.
Is this normal?
Also, when I close the dvd drive i hear a little "ping!" sound.
Like a spring or something. Is this also normal?
Thanks in advance.

Hi
Im not quite sure what you mean by 2 little silver metal bars but my notebooks drive contains two metals (runners, trackage).
This is normal and these parts are important to ensure that the drive could eject properly and could stay in right position.
You will always hear an short click opening and closing the drive.
So I assume this is ok.

Re: Satellite A200-1MY: XP sound driver does not work

Similar Messages

Maybe you are looking for