Re: Satellite A200 Touchpad scroll dosnt work after Win 7 installation

When I change my windows from xp to w 7 my scroll dosen t work.
What should I do?
Sorry for my english....

Hello
The BIOS downloads you can find on the same place as drivers:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, close all running programs and make sure that you are logged in as administrator.
Greets

Similar Messages

  • Satellite A200-1AX: very grainy videos after Win 7 installation

    Hello.
    I have a toshiba Satellite A200-1ax and it use to have Vista when i got it.
    I got rid of the OS and installed XP, thous installing the BIOS update for XP.
    I've recently installed Win7 and everything is good. The only problem i have is with video files.
    Every thing i watch is very grainy.
    I've installed some codecs and the catalyst for Win7 beta and thing's got a bit better. Still pixelized though.
    But HD video files don't work at all. It's the same as having a video card that doesn't support HD.
    The audio races ahead of the video.
    I haven't changed anything with the BIOS.
    Could the problem be from there? Should i run the BIOS update for vista?

    I use ti have Xp on the laptop and the same videos where great. Now they are grainy.
    HD doesn;t work properly.
    That's the only problem with this OS...
    Use to have vista, but i don;t want to go back to those memories :D
    PS - i gave the copy of win7 to a friend, he installed it and the videos are OK with him.

  • HP G62 touchpad scroll not working after Windows 10 update

    Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10.  I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port.  Can you please provide information on how to fix? Best,  

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad. 
     1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

  • Touchpad scroll not working after Windows 10 update

    Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10.  I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port.  Can you please provide information on how to fix?      

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad. 
     1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

  • Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

    I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
    I was not able to move my mouse arrow at all.
    I had to purchase a wireless mouse so I could use my laptop.
    When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
    I have a satellite l305d-s5881
    thanks for your help

    Hi mate
    The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
    You will need to visit the Toshiba US driver page in order to get all drivers.
    To get the touchpad working, you will need to install the Touchpad driver.
    Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
    You need to install both; firstly VAP and then Flash Cards.
    Here is the Toshiba US page:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    Greets

  • Satellite A200: Some devices stoped working after BIOS update

    I recently updated my BIOS to V2.60 on my Sat A200
    but ever since i apdated the BIOS some of the hardware components stoped working.
    So i decided to use the product recovery CD but it wont work anymore.
    Each time during its loading stage the system crashes and i get a blue screen mentioning a file called CLFS.SYS as the root of the problem
    Is there a solution for my problem?

    Hi
    What Sat A200-xxx do you have exactly?
    From my experience there are different BIOS versions for different operating system.
    The Vista and XP needs different BIOS!
    But I wonder why the Toshiba recovery disk does not function anymore? ?:|
    Usually you should be able to recover the system no matte what BIOS has been installed.
    Did you try to format the HDD firstly using another disk for example like Win XP?
    Check this!
    I think you should format the HDD again and then should try to recover the notebook using the Recovery disk

  • Satellite P300 - Microphone doesn't work after Windows 7 installation

    Hi,
    I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
    I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
    Thanks
    James

    Hi
    Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this it should be possible to use the internal microphone.
    By the way: Which application you use for the internal microphone? Skype or something else?

  • Satellite A350 - FN keys not working after Windows 7 installation

    Sorry for my bad english, i am forum Portugal and i don't are very good at english.
    1 I installed Windows 7 on my pc, installed the drivers 7 and FN was to give. However I had another problem and had to format the pc again, now install everything again and functionality not the FN.
    2 Without the drive functionality that is FN + F6/F7 brightness works. But with the drive not installed anything. It seems they are in conflict.
    3 The bar at the top of the screen that appeared no longer appears. But if I go to Start -> All Programs -> TOSHIBA -> Utilities -> Settings for TOSHIBA E-cards. With it open, squeeze "Allow the mouse to show the cards" and they appear at the top, as hidden. But just gives me no way, I wish to give to the FN.
    Anyone know how this is resolved?? It gave me immense way and even have tried everything, installed everything, there is nothing to block the FN key? A feature that blocks this key?? Please help me.
    My PC as it says in the title is Toshiba Sattelite A350D 10Y PSALME....

    To enable Fn key functionality, you need to install:
    TOSHIBA Value Added Package (v1.2.28)
    Utility Support Driver for Windows 7 (v1.0.25.5C)
    If you installed Vista version of those packages, it may not work properly.
    You need to Windows 7 versions specifically for the A350
    Win7 32bit http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_32_au.htm
    Win7 64bit http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_64_au.htm

  • Tecra M10-10z - 3G does not work after Win 7 installation

    Tecra M10-10z I have installed Windows 7 pro 64bit
    Everything is configured correctly, but connection 3G does not work: the message is " no network"
    with Windows XP is ok.
    I did not find firmware updates or similar.
    Is there someone who can help me?
    tks

    Hi
    In order to use the 3G you should firstly check if the 3G ericsson module was properly installed.
    In case there is an yellow exclamation mark visible in the device manager, the 3G driver should be reinstalled.
    I found on the Toshiba EU driver page:
    [Ericsson 3G Win 7 driver|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=295&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=295&page=1&ID=71930&OSID =-1&driverLanguage=42]
    Furthermore ensure that the 3G RF Power Control Utility has been installed properly.
    The 3G RF Power Control Utility" activates your 3G on startup.
    This tool can be found here:
    [3G RF Power Control Utility for Win 7 64bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=322&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=322&page=1&ID=73658&OSID =-1&driverLanguage=42]
    Hope the 3G network would functions after the reinstallation of both tools.

  • Satellite Pro C850 - WLAN keeps failing after Win 7 installation

    Hi,
    I own a C850-1GR (PSCBXE), which comes with Win8.
    I've bought Win 7 32-bit Home Premium and reinstalled it from scratch.
    Afterwards I've installed the drivers from toshiba support page in the following order:
    Intel Chipset SW Installation Utility
    Intel Management Engine Interface
    Display Driver
    Intel Rapid Storage Technology Driver
    Realtek Audio Driver
    ATI HDMI Audio Driver
    SRS Premium Sound HD
    Synaptics Touch Pad Driver
    Realtek LAN Driver
    Realtek Wireless LAN Driver
    Intel Wireless Display
    Realtek Bluetooth Filter Driver Package
    Bluetooth Monitor
    Intel USB3.0 Driver
    Realtek Card Reader
    TOSHIBA Value Added Package
    TOSHIBA Sleep Utility
    TOSHIBA Resolution+ Plug-in for Windows Media Player
    TOSHIBA Media Controller
    TOSHIBA Media Controller Plug-in
    TOSHIBA Network Device ID Registry Setting Tool
    TOSHIBA Web Camera Application
    PatchFiles PCIIDEREG-1.2
    PatchFiles
    When the installation is done, WLAN fails after reboot, alternately.
    This means:
    *First boot: WLAN OK*
    *Second boot: WLAN fails*
    *Third boot ( = first boot): WLAN OK*
    *Fourth boot ( = second boot): WLAN Fails*
    *and so on.*
    Failing means, the WLAN symbol is displayed for a few seconds, then the "no network" icon is displayed.
    Any help is greatly appreciated.

    >(Why on earth should a device report an error every second system boot?)
    Yes, indeed this is very confusing and strange.
    Just one notice regarding:
    >Please note, that the intel driver is for "wireless display".
    Intel wireless display works only in connection with Intel WLan card. If your notebook does not contain Wlan card from Intel manufacturers, the wireless display does not work
    >Furthermore, all these drivers are listed on the C850 driver page for Win7-32.
    Yes, this is true but all these drivers appear because of different C850 with different hardware configuration.

  • Tecra S3 - Wlan does not work after Win XP installation

    Hello everyone,
    I have recently purchased a Tecra S3 PTS30E-0TL059GH without operating system.
    I've installed WIndows XP professional.
    Everything works, except for the wireless lan. I can switch it on, but it doesn't seem to find the right drivers.
    The device manager states problems with the networkcontroller and two other unknown devices.
    I've installed all drivers from the toshiba website, but it still won't work.
    Any help is appreciated!
    Thanks!

    Hi
    I think the notebook supports INTEL 802.11 B/G WLan card but I'm not 100% sure about that...
    In my opinion you should try to identify the WLan module.
    How to do that?
    In such case the usage of the PCI database should be very helpful.
    More details here:
    [How to identify an unknown device (e.g. Wireless LAN module)?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]
    Knowing the exact WLan specs, it should not be a big deal to get the right driver.

  • Satellite C850-F0152 - Wireless is gone after Win 7 installation

    Hello
    I have a C850-F0152, i got it with Win 8 so i reformatted with win 7 x64, however my wireless is gone..
    What i mean is, i had wireless with win8, i could connect to networks and stuff, but with the reformat its just gone, there is no wireless adaptor being picked up in my device manager, and i cant see anything in the Network and sharing center.
    All my drivers are installled..i think, i let windows download most of them, and the only ones i cant find online and that windows also cant find is. Network Controller, USB Controller, then it lists 1 unknown device.
    Help someone Please, i got no clue whats going on.
    Regards
    Brigadier

    > All my drivers are installed...i think,
    Well, I think you did not install a compatible WLan driver
    The notebook seems to support Realtek Wlan / BT combo card.
    This means that one module shares the Wlan and BT function.
    In this case you should install Realtek Wlan driver, Realtek BT filter package and finally the Toshiba BT stack.
    PS. Satellite C850-F0152 belongs to the PSCBWF series. All drivers should be available on Toshiba EU driver page

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • When a PDF is opened in a tab, my laptop's touchpad scroll stops working for other tabs. (But works perfectly fine on the pdf tab or with every tab after closing the pdf tab)

    My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
    After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.

    Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
    Reader 9 is installed on my Win7 Starter.

  • Touchpad doesn't work after changing from Vista to XP Satellite A210

    Hi everybody!
    I have changed Windows and now something is wrong with Touchpad. It works only as a mouse (cursor moves, right and left buttons are also ok).
    Before with Vista I had email button, wireless connection, something else and sound changing, and plus it had extra blue light. Now these buttons are not active and no etrxa light.
    Laptop Satellite A210.
    I've tried all possible drivers already but maybe you could advice me something else.
    thanks in advance!

    please try this one
    http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20070809133247.zip
    and give us feedback if this driver helps or not
    thx

Maybe you are looking for