Re: Satellite A500 slow even after clean install of Windows7

My laptop suddenly slowed down hugely about 4 weeks ago and seemed to have a virus problem causing a BSOD. Any attempts to solve this were unsuccessful so we have just done a clean install of Windows7 in the hope of solving the speed issue.
However it still takes several seconds to respond to each mouse click at a stage where only Bullguard anti-virus and Windows 7 are installed on the laptop.
I've checked that the latest BIOS is installed v1.90.
I've checked that all device drivers are up to date.
I've checked the hard drive for faults and bad segments.
Please can anyone offer help or advice?
Many thanks.

Hi
Toshiba recovery disk allows you to set the notebook back to factory settings.
So using recovery disk you will get the same state like at the first day of purchase.
But nobody can say if your notebook would run faster after recovery procedure.
Usually the notebook should work properly also with installed Win 7
But if the notebook will work correctly after the installation of Recovery disk, then there must be something wrong with the installed Win 7 system.

Similar Messages

  • Sluggish and Slowness MacBookPro after clean install Mavericks

    Hi,
    My MacBook Pro 2012 become slow and sluggish after clean install Mavericks. I have to longgg waiting for applications to run ( even my old laptop can run Windows faster!! ). Compare I bought this MBP with Mountain Lion , this one is much slower with Mavericks. There are audible harddrive activity.
    I already done with NVAM & SMC reset but still nothing change on performance.
    Hope anybody here can help me since a quite a fews days i keep thinking to resolve this matter.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.5 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 2:58:42
    Disk Information:
              APPLE HDD ST500LM012 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (480.26 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
    Launch Agents:
    User Launch Agents:
    User Login Items:
              None
    Internet Plug-ins:
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              None
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 17.68 GB
              Destinations:
                        WD My Passport [Local] (Last used)
                        Total size: 465.41 GB
                        Total number of backups: 2
                        Oldest backup: 2014-01-31 14:48:18 +0000
                        Last backup: 2014-02-01 07:31:57 +0000
                        Size of backup disk: Adequate
                                  Backup size 465.41 GB > (Disk used 17.68 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   0%          imagent
    Top Processes by Memory:
              127 MB          com.apple.IconServicesAgent
              70 MB          mds_stores
              37 MB          mds
              37 MB          WindowServer
              29 MB          Activity Monitor
    Virtual Memory Information:
              2.23 GB          Free RAM
              941 MB          Active RAM
              222 MB          Inactive RAM
              644 MB          Wired RAM
              257 MB          Page-ins
              0 B          Page-outs

    @mamatcyber  @ Linc Davis
    Same issue here I have done clean installs using Super Duper (Back-up All Fresh clean slate...)
    and still Mavericks is getting slower and slower.....
    Using Gimp it now takes 5 mins to export a .jpeg file  500k !
    OSX 10.9.1
    Processor 2.26ghz
    Ram 2gb
    250gb HD  196gbfree
    Even just now I did a clean install and i'm seeing the spinning beach ball with Firefox, and it's slow to opening up volumes.
    This is Ridiculous Apple!

  • Mid-2010 27" iMac very slow, even after clean OS install - HELP!

    Good afternoon guys, I'm hoping someone can offer me some advice.
    I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
    Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
    Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
    I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
    Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
    I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
    Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
    Thanks in advance,
    Col

    Just suggesting things right off the bat here-
    To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
    Or try running Apple Hardware Test a few times back to see if it is a hardware error.
    As for the iLife apps they should've come on one of the install discs that shipped with your mac.
    If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
    See here:Computers that can be upgraded to use OS X Internet Recovery
    Good Luck!

  • Major crashes even after clean install.  iCal/sqlite/MobileMe the culprit?

    In 25 years of using Apple computers, I've never had problems like I'm having now.
    My iMac was acting up severely with some strange symptoms such as:
    * The red & white portion of the iCal icon in the dock disappearing, while the date itself remained visible.
    * All kinds of 0K sqlite files showing up on the base level of the hard drive, and a lots of cfx pref files being generated (stuff like cfx#1t9Oiul -- these i understand to be corrupt pref files). The sqlite files, by the way, show up as things like etilqs_3HVA6IL9BWQtB9e
    * Freezes, generally slow behavior, and multiple crashes, including the "blue screen of death" where the color just shifts and the cursor comes and goes. Eventually, even after running DiskWarrior, I the computer would start up, then spontaneously shut itself down after the grey apple screen with the progress wheel.
    Ultimately, I decided to just wipe the thing clean and start fresh from a backup.
    Using a Leopard install disk, I attempted to do the clean install, but was unable to from the iMac's internal optical drive - the installer told me the disk was damaged or dirty (the optical drive is brand new, by the way).
    Using a powerbook and putting the iMac in target mode, I was able to do a completely clean install.
    I ran all the software updates and have added NO third party software.
    Problems are back:
    Running a sync to get my calendar, contacts, and bookmarks back, I encountered my first problem again: address book wouldn't sync "due to inconsistent data" and told me to replace the data on the computer by resetting it -- which I attempted to do, multiple times, but the sync always failed.
    Then , once again those sqlite files started showing up.
    Then the iCal icon disappeared again and programs weren't responding. Moments ago I had to do a hard restart.
    I've zapped the PRAM, I've tried everything I know, and I'm still having all these problems (some of which, by the way, are now beginning to occur on the PowerBook G4 I also have).
    If anyone can provide me any guidance here, man would I love it. Is it possible the Leopard disk I have is somehow corrupted and is causing all these issues? Or is it hardware? Or is this some sort of problem that's being generated by synchronization?
    I'm really at my wit's end.
    Thanks to anyone who can give me a hand.
    Jon

    Just wanted to update anyone who's interested:
    After replacing the internal hard drive, all problems have ceased and my Mac is running beautifully -- fast (though I also upgraded the ram from 1 to 2 GB) and I couldn't be happier.
    So just a word to the wise: those "software" problems I was so certain I was having turned out to be a hard drive that was slowly failing. A friend of mine who's a programmer said he's never heard of a hard drive failing anything but suddenly, but in this case that's what happened.
    With the problems I was having, I was seriously beginning to question my loyalty to Apple.
    As it turns out, now I'm questioning their loyalty to Western Digital -- that drive was a dog and I'm glad to have replaced it with a Seagate.

  • Mac lagging even after clean install of mountain lion

    i have mac book pro 13" mid 2102- i7 version. it is lagging while video play back in quick time, audio in itunes, even VLC is lagging sometimes. Need for speed is lagging too. CPU usage is very low like 95% is Idle, 70% RAM is free.  I reinstalled OS(with secure formatting) but problem is still there. what you guys think is causing this, RAM or HDD. i tried repairing disk permissions before clean install but no luck. itunes lags like 2-3 secs which is annoying, quicktime lags for 3-4 secs and instantly plays video very fast for 2-3 secs after that stays normal for a min
    MplayerX never lagged while palying but all other itunes, vlc, quick time does.

    Post an image of Activity Monitor set to ALL PROCESSES and % CPU to display values from high to low.  Lets see if there is a third party app that is a problem.
    This is from mine:
    Do you have any 'cleaning' or 'performance' applications installed?
    Start up in Safe Mode and see if there is any change:
    http://support.apple.com/kb/HT1455
    Ciao.

  • EMac Crashing Even After Clean Install

    I've got an eMac that I bought late 2005. It's been working fine for seven months, but two weeks ago began having random crashes. The crashes seem to occur regardless of which applications are running or in the foreground. TechTool Pro finds no issues; neither does Disk Warrior. Performed OF resets. Tried different mouse and keyboard. Booted from factory disc and ran permissions, all repairs on startup volume. That didn't help. Neither did the Apple Hardware Test that came with the Mac. No errors or problems of any kind were found. Finally, I did a clean install of the OS, sure that would fix whatever was causing this. It did not. A crash occurred while copying some files from a local server. This bit appeared in that login account's console log:
    June 29 08:21:59 copy9 kernel: ** ASIC Hang Log End **
    June 29:08:22:05 copy9 kernel: ATIRadeon::submit_buffer: Overflowed block waiting for FIFO space. Have 5, need 6. RBBM_STATUS 0x8009c100. VAPCNTLSTATUS 0x00000002
    Also, FWIW, if I boot from a G4 Apple Diagnostic CD, I get this message: "Invalid memory access at: %SRR0:00000000 %SRR1: 00083030.
    Anybody have a clue about this? Do I have a RAM DIMM gone bad (even though test softare finds no problem with memory)? Problem with onboard video? Network? Am I missing something?
    Thanks for any ideas...

    Okay, let me clarify. Sorry for not being clearer earlier. My computer had been freezing and crashing and just not working for me for quite some time BEFORE I did the erase and install. That's why I finally did an erase and install as a last resort. The thing is, erasing and installing didn't fix anything. I ran Repair Permissions both before and after resinstalling. I still can't do anything unless I start up in safe mode. I am beginning to wonder if it may be a simple matter of needing more memory? Here is my embarassing computer information:
    I have an eMac, PowerPC G4; OS version 10.3.4.
    CPU speed: 1.25 GHz
    I assume my RAM is this DDR SDRAM?: 256MB
    The only peripherals I have besides the keyboard and mouse are a hpdeskjet 960c printer and an iSight, but I have not had either of those hooked up when I have tried to boot up my computer since doing the erase and install and it is still crashing.
    Hopefully this might be helpful in some way. I'm pretty lost here so you may be offering help to a lost cause and I'll just have to give in and take it somewhere, but thanx for taking the time to read my posts and try and point me in the right direction!

  • Experiencing complete freezes with my iMac even after clean install

    Hi,
    I've got a problem that I thought was something that only Windows was supposed to have and Apple actually used to advertise that Macs didn't have it. Complete freezes of the whole system.
    My iMac 21.5" (mid 2011), now with OS X 10.8.2, sometimes and without any apparent reason (There isn't any action on my part that appears to be linked with it) just freezes to the point where I can't even move the Mouse anymore. The keyboard is also unresponsive, and I believe that it can't be an input device error, because anything moving on the screen also freezes (for example MenuMeters).
    I'm not confusing this with a kernel panic, because there is no message thereof anywhere (and also, since 10.8, the Mac would restart immediately, which is not the case here).
    The only thing I can do in that case is to hold down the power button until the computer turns off.
    The problem first appeared already before I installed 10.8, and I also had several kernel panics within a month. Since I couln't find any reason for those either (I checked the error reports, but I couldn't finde anything that appeared in all of them that could link to a common cause), I made a clean install from the recovery partition.
    I didn't copy any Libraries, I just backed up the files from my user folder to recover them. Therefore, there shouldn't be anything like old .kext s and such left.
    But now, my Mac froze again and I don't know what to do anymore. I did install some new RAM some 2-3 Months ago, but I ran memtest and it all checked out ok so it shouldn't be linked to a Memory problem either...
    Since the problem might be very unique here, it might help if anyone knew something to make out the cause of this. Maybe some logging tools or something else to at least find problem, or maybe something to perform a really thorough hardware test.
    Thanks for the help,
    Alex

    Put the old RAM back in and test.

  • System crashes, even after clean install. How to diagnose?

    Hi all,
    Have been experiencing weird errors with my 2010 MBP, among which infrequent system crashes. I've seen my MBP swallow keypresses of the external Logitech keyboard I use. Replacing it with another (similar) model didn't help. It was getting quite annoying and I was beginning to distrust my Mac. I work on that, so it's crucial I have it running well.
    After doing a complete clean install yesterday, the system crashed after 10 minutes of use. I'm suspecting a drive problem. I replaced the internal drive by a Crucial 256GB SSD a year and a half ago. I've already asked Disk Utility to do a check of the disk, but it reports no problems.
    My system is now completely clean, but it's still not stable. How can I diagnose my MBP's issue?
    Look forward to hearing from you,
    Martin

    Ok, adding some info as requested in other posts. Hope anyone can make something useful from this. The crash after 10 minutes of running was a kernel panic. It says page_fault now that I look at it in some detail. Is that a memory thing?
    Anonymous UUID:      XYZ
    Sun Nov 24 01:00:50 2013
    panic(cpu 1 caller 0xffffff80044dc19e): Kernel trap at 0xffffff80044c6124, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000080000038, CR3: 0x000000003a381000, CR4: 0x0000000000000660
    RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000080000000, RDX: 0xffffff801070d000
    RSP: 0xffffff80ec0ebc20, RBP: 0xffffff80ec0ebc80, RSI: 0x0000000000000020, RDI: 0x0000000000103b48
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0x000000010c735008, R11: 0x00007fff75ffd810
    R12: 0x000000012779a000, R13: 0xffffffffffffffdf, R14: 0xffffff8012783900, R15: 0x0000000000000001
    RFL: 0x0000000000010246, RIP: 0xffffff80044c6124, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000080000038, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80ec0eb8b0 : 0xffffff8004422f69
    0xffffff80ec0eb930 : 0xffffff80044dc19e
    0xffffff80ec0ebb00 : 0xffffff80044f3606
    0xffffff80ec0ebb20 : 0xffffff80044c6124
    0xffffff80ec0ebc80 : 0xffffff8004476955
    0xffffff80ec0ebd50 : 0xffffff8004478c62
    0xffffff80ec0ebf20 : 0xffffff80044dc5dc
    0xffffff80ec0ebfb0 : 0xffffff80044f350b
    BSD process name corresponding to current thread: mds
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000004200000
    Kernel text base: 0xffffff8004400000
    System model name: MacBookPro5,2 (Mac-F2268EC8)
    System uptime in nanoseconds: 2428220935215
    last loaded kext at 252582234123: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f86553000, size 65536)
    last unloaded kext at 488420607457: com.apple.iokit.IOUSBMassStorageClass          3.6.0 (addr 0xffffff7f84ec8000, size 69632)
    loaded kexts:
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AGPM          100.14.11
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.GeForceTesla          8.1.8
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.nvenet          2.0.21
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBOHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          91
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1

  • MacBook Pro - apps quitting unexpectedly even after clean install of SL

    I did a clean install last night because flash application and associated files kept crashing. Today they seem to be ok. But now I have programs unexpectedly quitting. Just opened After Effects and it quit with a notice about a missing symbol. Maya quit before that as well.
    Here is a list from my console:
    27/02/2010 14:10:21 [0x0-0x43043].com.autodesk.Maya.2010[1428] mental ray for Maya 2010
    27/02/2010 14:10:22 [0x0-0x43043].com.autodesk.Maya.2010[1428] mental ray: version 3.7.53.5, Jun 17 2009, revision 88216
    27/02/2010 14:11:58 kernel open (map: 0x50a01ec) triggered DYLD shared region unnest for map: 0x50a01ec, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:12:00 kernel QuickTime Player (map: 0x50a00a4) triggered DYLD shared region unnest for map: 0x50a00a4, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:13:06 kernel open (map: 0x550de18) triggered DYLD shared region unnest for map: 0x550de18, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:13:07 kernel open (map: 0x50a0e18) triggered DYLD shared region unnest for map: 0x50a0e18, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:14:33 kernel open (map: 0x550dcd0) triggered DYLD shared region unnest for map: 0x550dcd0, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:15:42 kernel open (map: 0x50a0c2c) triggered DYLD shared region unnest for map: 0x50a0c2c, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:26:31 kernel helpd (map: 0x50a01ec) triggered DYLD shared region unnest for map: 0x50a01ec, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:26:32 Maya[1428] failed to send request 0: -1
    27/02/2010 14:26:32 Maya[1428] failed to send request 0: -1
    27/02/2010 14:26:43 [0x0-0x43043].com.autodesk.Maya.2010[1428] Fatal Error. Attempting to save in /var/folders/Dj/DjDgxIHyH8aazmcdockc-++TI/-Tmp-/xxxweedarlinxxx.20100227.1426.ma
    27/02/2010 14:26:44 [0x0-0x43043].com.autodesk.Maya.2010[1428] pure virtual method called
    27/02/2010 14:26:44 [0x0-0x43043].com.autodesk.Maya.2010[1428] terminate called without an active exception
    27/02/2010 14:26:54 com.apple.launchd.peruser.501[87] ([0x0-0x43043].com.autodesk.Maya.2010[1428]) Job appears to have crashed: Abort trap
    27/02/2010 14:26:56 ReportCrash[1491] Saved crash report for Maya[1428] version Maya 2009 (2010) to /Users/xxxweedarlinxxx/Library/Logs/DiagnosticReports/Maya2010-02-27-142656localhost.crash
    27/02/2010 14:26:56 kernel Problem Reporter (map: 0x50a0290) triggered DYLD shared region unnest for map: 0x50a0290, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:26:57 kernel system_profiler (map: 0x50a0e18) triggered DYLD shared region unnest for map: 0x50a0e18, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:02 kernel SyncServer (map: 0x550dcd0) triggered DYLD shared region unnest for map: 0x550dcd0, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:03 kernel DockSyncClient (map: 0x50a0c2c) triggered DYLD shared region unnest for map: 0x50a0c2c, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:04 com.apple.launchd.peruser.501[87] ([0x0-0x44044].com.apple.QuickTimePlayerX[1443]) Exited: Killed
    27/02/2010 14:27:08 kernel quicklookd (map: 0x50a0c2c) triggered DYLD shared region unnest for map: 0x50a0c2c, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Texture memory: 238
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Vendor string: NVIDIA Corporation
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Renderer string: NVIDIA GeForce 9400M OpenGL Engine
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Version string: 2.1 NVIDIA-1.6.6
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] OpenGL version as determined by Extensionator...
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] OpenGL Version 2.0
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Has NPOT support: TRUE
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Completed shader test!
    27/02/2010 14:27:33 [0x0-0x49049].com.adobe.AfterEffects[1506] Return code: 7
    27/02/2010 14:27:36 kernel mdworker (map: 0x50a0290) triggered DYLD shared region unnest for map: 0x50a0290, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:38 kernel mdworker (map: 0x50a0e18) triggered DYLD shared region unnest for map: 0x50a0e18, region 0x7fff87800000->0x7fff87a00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] dyld: lazy symbol binding failed: Symbol not found: __ZN2MF22SetReserveSizeFunctionEPFvllE
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] Referenced from: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/PREM.dylib
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] Expected in: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/MediaFoundation.framework/Versions/A/Media Foundation
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] dyld: Symbol not found: __ZN2MF22SetReserveSizeFunctionEPFvllE
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] Referenced from: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/PREM.dylib
    27/02/2010 14:27:43 [0x0-0x49049].com.adobe.AfterEffects[1506] Expected in: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/MediaFoundation.framework/Versions/A/Media Foundation
    27/02/2010 14:27:47 com.apple.launchd.peruser.501[87] ([0x0-0x49049].com.adobe.AfterEffects[1506]) Job appears to have crashed: Trace/BPT trap
    27/02/2010 14:27:47 ReportCrash[1491] Saved crash report for After Effects[1506] version 9.0.2 (9.0.2) to /Users/xxxweedarlinxxx/Library/Logs/DiagnosticReports/After Effects2010-02-27-142747localhost.crash
    27/02/2010 14:27:47 kernel Problem Reporter (map: 0x50a0290) triggered DYLD shared region unnest for map: 0x50a0290, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:27:48 kernel system_profiler (map: 0x550de18) triggered DYLD shared region unnest for map: 0x550de18, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Texture memory: 238
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Vendor string: NVIDIA Corporation
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Renderer string: NVIDIA GeForce 9400M OpenGL Engine
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Version string: 2.1 NVIDIA-1.6.6
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] OpenGL version as determined by Extensionator...
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] OpenGL Version 2.0
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Has NPOT support: TRUE
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Completed shader test!
    27/02/2010 14:28:05 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Return code: 7
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] dyld: lazy symbol binding failed: Symbol not found: __ZN2MF22SetReserveSizeFunctionEPFvllE
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Referenced from: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/PREM.dylib
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Expected in: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/MediaFoundation.framework/Versions/A/Media Foundation
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] dyld: Symbol not found: __ZN2MF22SetReserveSizeFunctionEPFvllE
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Referenced from: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/PREM.dylib
    27/02/2010 14:28:09 [0x0-0x4f04f].com.adobe.AfterEffects[1525] Expected in: /Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/../Frameworks/MediaFoundation.framework/Versions/A/Media Foundation
    27/02/2010 14:28:11 ReportCrash[1528] Saved crash report for After Effects[1525] version 9.0.2 (9.0.2) to /Users/xxxweedarlinxxx/Library/Logs/DiagnosticReports/After Effects2010-02-27-142811localhost.crash
    27/02/2010 14:28:11 com.apple.launchd.peruser.501[87] ([0x0-0x4f04f].com.adobe.AfterEffects[1525]) Job appears to have crashed: Trace/BPT trap
    27/02/2010 14:28:11 kernel Problem Reporter (map: 0x550de18) triggered DYLD shared region unnest for map: 0x550de18, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:28:11 kernel system_profiler (map: 0x550d7b0) triggered DYLD shared region unnest for map: 0x550d7b0, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    27/02/2010 14:29:00 kernel Console (map: 0x50a0ae4) triggered DYLD shared region unnest for map: 0x50a0ae4, region 0x7fff83600000->0x7fff83800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.

    Then, make a list of those fonts and move them out of the various /Library/Fonts/ folders to a new folder on the Desktop and restart. Now run Font Book. For more on fonts, see Font Management in OS X

  • Shift key doesn't select blocks of files.  Even after clean install of mavericks in case it was old snow leopard problem.  Can only select individual files

    Hi for a few months my shift key stopped allowing me to select blocks of files and worked like the cmd key selecting just individual files.   Apple store sold me a. New keyboard when I connected it first time it worked. But after shutting down mac it never worked again.   Have just performed clean install of new mavericks as I was told it must be the permissions or other account settings etc.    But 2 days later after lots of work shift still doesn't work.  Every now and then it would work once and then. Not again.  I work with photos a lot and only being able to choose individual files is a nightmare.  Can anyone explain this problem.?

    I installed mavericks from a USB and reformatted the hd.  I set up a new user account added email, apple ID  etc and then downloaded new iPhoto and iMovie.  I manually copied documents, music inc itunes library folder and photos from time machine back up.   I also copied original apps only using migration assistant to get idvd and garageband back as despite a lot of searching i couldnt find a way to selectively reinstall original apps not purchased from app store.  Only third party apps are photoshop elements 9 and office 2011.

  • Firefox appears to be hijacked even after clean install.

    Hello,
    My sister has this weird problem on her computer and it was involved with Windows and Firefox. When she opens Firefox, her entire computer crashes down, shows a black desktop, and pulls up a BSOD (blue screen of death) the main error was CRITICAL_OBJECT_TERMINATION. Error code I believe was 0x0000004. Mysteriously, the minidump of that BSOD disappeared. I wondered that since this problem only happened when I opened firefox, I decided to clean install Firefox. I uninstalled Firefox with removal of personal data and customizations and installed a clean copy from Mozilla.org. Firefox is still unusuable. It doesn't cause the BSOD but it will not allow me to go to ANY URLS (initially, it showed me the "Firefox has been installed page" and another page that said "The address is not valid" any other URLS will not load if I hit enter or hit the go arrow key on the address bar) and the search box has no search engine at all! (icon is a blank file). I've tried reseting the program back to factory defaults. I've scanned for Malware on Malwarebytes Pro, GMER, TDSSKiller, and Hitman Pro. Every other program seems to work fine, at least I hope it does. My last resort is to reset this entire computer.

    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    You can use the MSConfig program or the Autoruns utility to see which software and services are getting started.
    *http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  • Firefox window not displaying properly even after clean install

    Hi - Yesterday firefox stopped displaying properly on my windows 64-bit dell laptop running Windows 7 home premium. When it starts up all I get is a thick translucent bar at the top of the window where the toolbars normally are, and the main content pane is jet black. I'm pretty sure firefox is actually running. If I pass the mouse over the transluscent bar the cursor changes to indicate whether in input boxes are for web addresses and the google toolbar, and task manager shows it is running the firefox start page. But I can see nothing.
    I have uninstalled firefox, rebooted and done a clean install (twice) based on the help instructions, but no change. All other applications seem to be running normally. This is the first time I have ever had a problem with firefox.
    Thanks

    hello jp100, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Constant Freeze Even After Clean Install Mountain Lion

    Hi!
    I have before started a post on similar topic but back then it ended with a clean install which worked nicely for merely a month.
    Currently I am using 13' MBP 2010 with 2.4 GHz Core 2, 4 GB DDR3. 168GB free of use and latest Mountain Lion, 10.8.3.
    My Mac started acting weird and all in all application I am opening.
    It will freeze and show that beach ball for 1 or 2 seconds. Believe me, it's extremely annoying if you are listening to music with iTunes or editing photos with Aperture.
    I had installed some apps like Aperture, PopClip, Pocket, Transmission, Onyx, Paragon NTFS.
    I am tired of doing clean install and re-installing all the apps with their updates, not to mention restoring all of my datas from Time Machine.
    I have done booting in Safe Mode and repaired permissions from there. I have reset PRAM/SMC.
    Please anyone, enlighten me on this!

    The surface scan will take quite a while.
    Aperture can pull quite a bit of RAM, so Raidiation Mac's suggestion about more RAM for pro apps is a good one, if all else turns up OK.
    OnyX shouldn't be a problem but on the other hand you shouldn't need it for anything. Maintenance and optimization are things your Mac should be doing in the background with no further help needed. Downloading torrents is always iffy and an easy way to pick up malware. The rest of the third party apps I'm not familiar with.
    I wish you had tested the clean install before adding the apps. If you have another disk you can do a clean install of ML on and run from that disk for a while, it would tell whether it was your Mac or the added software.

  • Satellite 1410 - slow even after formating

    My computer became really slow (I cannot watch videos), so I thought I had a virus and I scanned my pc.
    He found a virus called "fast.exe", I deleted this file but I still had some problems, so I decided to format the pc using the recovery disks but my pc is still slow.
    Does the formating made by the recovery disks delete everything or just crush the system ?
    Some people adviced me to make a low level formating but I don't know how to do it and I have always thought it was quite dangerous.
    What should I do ?

    Hi,
    As far as I know if you reinstall your OS with Recovery CD, there is no low level formatting. All your data will be deleted. Every time before you want to reinstall OS back-up your data. If you have second partition you can save it there.
    Dont worry. Install your OS again. Also try to install SP2 to be sure that your Notebook is up to date.
    Lot of factors can be responsible when your Notebook works slowly. You can also disable all processes that you do not need. You can find them in System Configuration Utility (Start>Run>enter msconfig and OK). Under Startup you can disable all programs that you do not need.
    I have also bad experience with speed of my machine. After installation of Antivirus Software, my Notebook was very slowly. Without this Software machine was fast again.
    Back-up your data and try to find out what is problem with your Satellite.
    Bye

  • MacBook Air 2010 Very Slow (even after clean reinstall)

    Hi,
    Problem
    The performance of my Macbook Air 2010 has slowed to the point where I can hardly complete basic tasks. For comparison, I use a MacBook Air 2013 at work and do not experience the same performance issues, so I believe my expectations are not unreasonably high.
    My Question
    Can you please advise on what I can do to troubleshoot? I've tried the solutions listed below, all of which have failed.
    I'm grateful for any help you can offer.
    Problem Description
    Switching contexts or tabs, operating within applications (such as Chrome, small Excel spreadsheets, navigating files), and browsing the Internet has become a slow, laggy and crash-filled experience.
    When right-clicking an icon and selecting 'Open With', Finder frequently times out or requires time to populate a list of applications.
    Machine is slow to the point where, unless a solution presents itself, I'll have to get a new MacBook Air.
    What I've Tried
    'Religiously' close all applications after use; extremely conscientious of number of applications running and their resource requirements.
    Clean reinstall of OS X.
    Storing all media on external hard drive to create more storage space.
    Clearing cache for all browsers regularly
    Always running machine on battery power
    Regular reboots
    Machine Specs:
    MacBook Air 13-inch, Late 2010
    OS X Yosemite Version 10.10.2
    Processor: 2.13 GHz Intel Core 2 Duo
    Memory: 4GB 1067 MHz DDR3
    Graphics: NVIDIA GeForce 320M 256 MB
    Storage: 87GB free of 250GB

    Thanks, dominic23.
    Unfortunately, it did not work.
    -Tried starting in safe mode, resetting SMC, and repairing disk. Resetting the SMC helped upon reboot, but performance degraded swiftly and back at a low within 30-minutes.
    Here is the full EtreCheck report:
    EtreCheck version: 2.1.8 (121)
    Report generated February 23, 2015 at 12:24:01 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Air (13-inch, Late 2010) (Technical Specifications)
        MacBook Air - model: MacBookAir3,2
        1 2.13 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 336
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 2 days 2:11:3
    Disk Information: ℹ️
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Untitled (disk0s2) / : 250.14 GB (82.89 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. FaceTime Camera (Built-in)
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [loaded]    org.pqrs.driver.Karabiner (10.6.0 - SDK 10.10) [Click for support]
            /Applications/Seil.app
        [loaded]    org.pqrs.driver.Seil (11.0.0 - SDK 10.9) [Click for support]
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.22) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        8 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
        [running]    org.gpgtools.gpgmail.updater.plist [Click for support]
        [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
        [running]    org.gpgtools.macgpg2.shutdown-gpg-agent.plist [Click for support]
        [running]    org.gpgtools.macgpg2.updater.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
        [loaded]    org.wireshark.ChmodBPF.plist [Click for support]
    User Launch Agents: ℹ️
        [running]    com.spotify.webhelper.plist [Click for support]
        [not loaded]    org.virtualbox.[redacted]oxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        Alfred 2    Application Hidden (/opt/homebrew-cask/Caskroom/alfred/2.5.1_308/Alfred 2.app)
        Seil    Application Hidden (/Applications/Seil.app)
        Karabiner    Application Hidden (/Applications/Karabiner.app)
        DoublePane    Application Hidden (/Users/[redacted]/Applications/DoublePane.app)
        HazelHelper    Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
        Keyboard Maestro Engine    Application  (/opt/homebrew-cask/Caskroom/keyboard-maestro/latest/Keyboard Maestro.app/Contents/Resources/Keyboard Maestro Engine.app)
        Flickr Uploadr    Application  (/Applications/Flickr Uploadr.app)
    Internet Plug-ins: ℹ️
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.6 [Click for support]
        Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
    3rd Party Preference Panes: ℹ️
        GPGPreferences  [Click for support]
        Hazel  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            10%    WindowServer
             8%    mds
             7%    Alfred 2
             6%    mds_stores
             6%    Finder
    Top Processes by Memory: ℹ️
        185 MB    Google Chrome
        166 MB    Google Chrome Helper
        96 MB    Finder
        82 MB    Messages
        47 MB    WindowServer
    Virtual Memory Information: ℹ️
        35 MB    Free RAM
        1.32 GB    Active RAM
        1.30 GB    Inactive RAM
        963 MB    Wired RAM
        42.77 GB    Page-ins
        1.12 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 22, 2015, 11:44:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-22-234456_[reda cted].crash
        Feb 22, 2015, 05:28:10 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-22-052810_[reda cted].crash
        Feb 20, 2015, 11:49:00 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/CalendarAgent_2015-02-20-23490 0_[redacted].crash
        Feb 20, 2015, 11:26:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soagent_2015-02-20-232645_[red acted].crash
        Feb 20, 2015, 10:12:01 PM    Self test - passed

Maybe you are looking for

  • Oracle 8.1.6 on Mandrake 7.2 (Complete)

    I am installing Oracle8.1.6 on Sony PCG F-580 notebook OS Linux Mandrake7.2 (Complete)getting errors: Error in involing targrt ntcontab.o of makefile 1) /u01/app/oracle/product/8.1.6/network/lib/ins_net_client.mk 2) /u01/app/oracle/product/8.1.6/sqlp

  • Where is my FaceTime for Mac?

    Hi everyone, I just purchased FaceTime for Mac, but I have not received a confirmation e-mail nor do I find the app anywhere on my MacBook? What do I do? Where can I find it? Thans in advance for your kind help!

  • Why do iOS 5-only apps appear in app-update queue?

    I have two apps sitting in my update queue that will only run on iOS 5 (I have iOS 4). Is there any way to clear your queue, or decline an update? I do not want to upgrade to iOS 5 (or Lion). Also, can anyone explain to me why the App Store upgrade p

  • Backups in cron not running

    I'm trying to run rsnapshot through cron to automate my backups but it's not actually running rsnapshot for some reason . Here's my crontab: brian@brian-laptop:/var/log$ sudo crontab -l # DO NOT EDIT THIS FILE MANUALLY!! USE crontab -e INSTEAD. # <mi

  • IOS 6 is very slow. Why!!! Can u fix that apple?

    I have downloaded iOS 6 on the day it release and I have trouble with opening gmail on my iPhone and iOS 6 is very slow. I don't know what wrong with that. Did anyone know about it.