Re: Satellite A660 - No boot after RAM upgrade

I have just gotten 8GB of RAM for my Satellite A660, it is Corsair CM3X4GSD1066 4GB PC-8500 (1066MHz) 204-pin SO-DIMM DDR3 RAM CL7.
The system posts fine and the 8GB is showing up in BIOS but once its clears post and goes to load Windows it stops on the black screen, the cursor flashes a few times then it stops. I have left it for about 5 minutes and it wont boot through.
Please Help.
I have replaced the 4GB sticks and it works fine.

Hello
For me it sounds like that the modules are not compatible or have defective sectors
As Akuma wrote, such performance modules are risky in notebook because you dont have any options to change the latency values as on desktop computers. So I always prefer Kingston modules for notebook RAM upgrade.
But before you buy other modules, try a BIOS update and load the default settings.

Similar Messages

Mac mini won't boot after RAM upgrade.

Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
Things I've tried so far:
1. Resetting the PRAM, no luck.
2. Holding option at start-up, shows no icon.
3. Holding shift, no luck.
4. Holding X, nothing.
How do I get it to accept a CD if it won't boot?

Welcome to Apple Discussions!
You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

MacBook not booting after RAM upgrade

I'm sorry if the case has been already posted.
Yesterday I took my MacBook Alu unibody late 2008 to a RAM upgrade (from 2 to 4gigs) to an offical Mac Reseller. They installed it and showed me that the system loads properly and recognized the new RAM.
I took it home, started working on After Effects and Photoshop and when i wanted to check a video on Quicktime, this program refused to boot.
Then photoshop freeze and after effects did so. I quited all aplications and restarted. On restart after the 'bong' i've got the grey screen white an apple logo and a loading bar underneath, that was it, it never finished loading but shutting down.
After the 2nd try the computer gave me the BAD RAM alarm signal right before the start button was pressed and nothing more. I just managed to start it ONCE on safe mode, but this one also freezed and colapsed.
Today i didn't get the BAD ram alarm but the grey screen and loading bar after shutting down.
I took it back to the reseler, the shop boss who did the upgrade wasn't there , the guys on the morning shift placed the old RAM back resulting the same. So they told me it's a software problem, not hardware and might be caused by a failed firmware update or something i did wrong and since i was showed that the system booted after the upgrade i can't complain or argue that they did somethiing wrong.
So basically the want 80euros to check what's wrong with my computer plus the 120 i already payed them for a RAM that doesn't work and of course the repair cost of the computer.
On monday i'll go to talk to the boss, what do you guys recomend me to tell him? i'm frustrated that the guys there treat me like if i broke my computer for beeing stupid and wanted to get it fixed for free, when it clearly broke after they did something wrong on it!
please advice me!
thanks!
Message was edited by: finn bell

What brand is the RAM? From what you said, it is obvious that the RAM is at fault. I would simply tell them that it is not compatible and return the RAM.
Check the System Profiler to see what it says about the RAM (Apple Logo - About this Mac - More Info) and run this application to test the RAM:
http://www.memtestosx.org/joomla/index.php
If either shows any errors, print out the results and take them with you to the store.

Macbook Pro is Not Booting After RAM Upgrade

Hi,
I just upgraded the RAM in my MacBook Pro running Mountain Lion from 4gb to 8gb (Using the memory that the guy at Fry's recommended). It has been stuck on the Apple logo for about 20 minutes after the upgrade, even after I made sure that the RAM was seated properly. Is it normal for it to take this long to boot after a RAM upgrade?

I installed 8gb (2 X4gb) and it has a maximum of 8gb. I have determined that it was just bad RAM, so I will return it as soon as I can.
Thanks.

MacBook Pro won't boot after ram upgrade...

Hey everybody! Hope everyone is having a great Christmas! I got a 16gb ram upgrade for my 2012 MacBook Pro 15 today and I am having some trouble with the upgrade. Its an odd problem. I installed the two 8gb sticks no problem, but when I try and boot into OS X the machine shows the apple logo with the spinning wheel underneath, and then it just shuts itself off. I don't know what the problem is. The machine boots fine into my Windows 7 partition, and registers both sticks of ram. OS X restore also boots no problem and lets me reinstall OS X, which is what I am doing currently. IDK if this is just because of a hardare change or what. The ram I installed is Adata pc3 12800 1600mhz ram, so it should be supported.

Replace the Ram, buy from OWC or Crucial, buy the Ram Apple recommend, don't rely on "it should work"

Satellite A660 - Fuzzy fonts after IE9 upgrade

I have Satellite A660 and when I upgraded to the new IE version 9 fonts are fuzzy in FB and some sites, very hard for the eye.
Toshiba hasnt released new drives for Nvidia 330M either...any help appreciated.

Sorry if i sounded 'bother-some' :) I just cant help my self get into problems and solve them.( with computers that is) well you're not the only one who says it...when you mess with it a lot. it gives few issues but then you learn a lot. Maybe i should stop this 'abuse'
*Well, fuzzy fonts, well, fonts are bit hard to read or fuzzy. My other work toshiba doesnt have the issue ( older model). Quite a few people on the internet have had this issue. If you have the same model and use IE9 with (NVIDIA G330M) please do give me some feedback. Can you also tell me the driver version of you GPU?*
Have you upgraded to IE9?- yes i have used chrome it's fine so was IE 8. I am in half mind to revert back to ie8.
What i read so far is its how IE is rendering fonts. A new techonology, so says MS.
Kindest regards,
PS : YOu can look at some photos of this issue in this article
http://www.sevenforums.com/browsers-mail/152094-blurry-text-ie9-firefox-4-read.html
Message was edited by: wsb123
Message was edited by: wsb123

Satellite P10-504 doesn't boot after RAM upgrade

Just got 2x 1GB sticks of DDR 400 soddim's, and no boot.
Now after reading up on what I could find on similar models, seems that these older laptops may not handle that fast of ram?
Would using some DDR 266 be more appropriate?

Hi
If the notebook doesnt boot up then there is a big chance that the RAM is either nto compatible or its faulty.
I think its not compatible.
I found this page:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=7090&ft=m&st=3
According to this page the P10 supports the *200-Pin PC2700 (333Mhz) DDR SODIMM* memory modules!
So your RAMs are not compatible!

Lion freeze on boot after ram upgrade.

I have a mid-2010 13" Macbook Pro. I wanted to upgrade to 8G of ram so I bought this: http://www.amazon.com/gp/product/B002YUF8ZG/ref=oh_details_o00_s00_i00
When it arrived in the mail I installed it and booted the laptop. The apple logo comes up, the spinner starts spinning and then after awhile freezes. I figured that I recieved bad RAM so I sent it back to apple and they sent me new memory. I installed the new ram and the same thing happened again. Booting in verbose mode (Apple-V) doesn't give anything useful.
This time I decided to run memory tests. I booted into single user mode (which sees 8G of memory and works fine) and ran memtest overnight. It ran 6 or 7 passes without finding any memory errors.
My next plan is to try to my DVD reinstall/repair the OS to see if that will help but I don't want to do that because I would have to downgrade to Snow Lepoard and then reinstall Lion and that takes long enough to try to avoid.
Any things to try?

When you boot in single user or safe mode, all third party software is prevented from started. So it is possbile one of your third party party applications that are starting at boot is not compatable with the new RAM. I would try turning it all off and then test them all each in turn.
Allan

Laptop won't boot after RAM upgrade

Hello guys,
I've just upgraded my RAM from 4gb to 8gb.
I know I can do it since the manual from my notebook says so. After installing the new RAM my laptop only shows blank screen. I upgraded my ram with Corsair CMSO8GX3M2A1333C9. How do I solve this problem? Thanks for the help!
Cheers
Edit : Clumsy me, It hadn't clicked properly now it run smoothly
Solved

I took a look at the memory finder on the Corsair website. Corsair does not appear to produce any modules that they guarantee are compatible twith your notebook. You may end up having to return the modules. Contact Corsair support via the Corsair forum to see if they know which modules will work with your notebook.
Did you add two modules or add only a single module to the one that was already installed?
For a successful memory upgrade, alwaays add memory modules in identical pairs of guaranteed compatible memory modules.
The Crucial modules that are guaranteed compatible are in the following image
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP g4-1387 won't boot after RAM upgrade

I have an HP g4-1387la with 4Gb of RAM and I want to add it 4 more Gigas.
I bought a 4Gb DDR3 SODIMM 1333MHz Kingston RAM but when I put it in the slot and try to boot my notebook it stays on a blackscreen, it turns on, but doesn't boot.
If I take off the Kingston RAM it boot normally. This notebook accepts up to 8Gb of RAM. What is the problem ?
Thank you

Are you running Windows 7 - 64bit?
HP Pavilion G4 Notebook PC Maintenance and Service Guide
From the Service and Maintenance Guide:
Supports the following configurations:
● 8192-MB total system memory (4096×2; not
supported with Windows® 7 32-bit
operating system)
● 6144-MB total system memory (4096×1 +
2048×1)
● 4096-MB total system memory (4096×1 or
2048×2)
● 3072-MB total system memory (2048×1 +
1024×1)
● 2048-MB total system memory (2048×1 or
1024×2)
● 1024-MB total system memory (1024×1; not
supported with Windows 7 64- or 32-bit
operating system)
Here is a reference Guide you can look over to see if you missed anything.
There is a Troubleshooting section you can check that may help resolve any temporary issues.
Upgrading Memory (RAM)
Kind Regards,
Dragon-Fur

GE60 2OC won't boot after RAM upgrade...

Hi forum
I just upgraded my laptop ge60 2oc 014ne, with two 8 GB corsair value select sticks.
Now my machine won't boot. I hit the button, the power light turns on, then the harddrive indicator lights for a while... And then it just stands there... Nothing shows on the screen..
Any help? Please..
Cheers

Quote from: NexumxRaptoR on 07-November-13, 23:58:36
another thing is that you can't put in more RAM than the notebook came shipped with right?
If it originally had 8GB over 2 slots you can't put in more than 8GB in the entire notebook right? (I thought I read something about that somewhere....)
Nope. Not true.
In most cases it's restricted by 1 of 3 things....either the CPU, the IMC (Integrated Memory Controller) or the BIOS.
MSI is pretty good about NOT restricting it via the BIOS in some way.
Usually it ends up being the IMC that restricts it, either via a maximum memory (say 32 GB) or via a maximum amount of memory per module (say 8GB).
Either way, the GE60 I believe should support up to 16GB of memory. I think it should come with 2 memory sockets. You need to ensure that they are 1.35V compatible given the fact that you have a Haswell system.
http://www.msi.com/product/nb/GE60-2OC.html#specification
Confirms that it has 2 memory sockets, and supports up to 16 GB of memory, so 2 x 8GB sticks.

Aspire AOD-260 Wont boot after RAM upgrade

Hi all, I have a Acer Aspire AOD-260, which comes with 1GB of RAM.I purchased a 2GB DDR3-1333 PC3-10600 (which from what I can tell is the same spec as the 1GB currently in the netbook) When I put the 2GB in - the PC won't boot, I can't even get into the BIOS. (2 of the LED's Remain on - The far left one (with a lightbulb) and the far right (with the signal image)I put the 1GB back in after and it booted fine. This is the RAM I purchased - http://www.kingston.com/en/memory/search/?partid=kvr13s9s6/2 Can anyone shed some light as to why this is happening? Regards,Warrick

Hello, The Aspire One D260 works with DDR2 or DDR3 according the models (3 motherboards).In your case, you need DDR3 memory stick. The original memory stick for your netbook is:KN.2GB0B.026SODIMM.2GB.DDR3-1333.SAMSUNG.LFYou'll see the Samsung part number on the webpage.

Server 2k8 Foundation wont boot after RAM upgrade

Specs:
Intel Core i3-550 3.2GHz 4M LGA1156 Processor
Crucial 2GBx2 DDR3 1333MHz Memory
Intel DQ57TM Motherboard
500GB (2X500GB) 7.2 RAID 1 Mirror
Running Server S2k8 R2 Foundation. I attempted to upgrade the ran to 8GB (from 4GB). I matched the Ram down to the latency but when i boot with new ram the BIOS recognizes it but when it attempts to load Windows Server it shuts down and starts
an boot cycle loop.
I have checked the BIOS and there are no options for settings on the ram without overclocking. OC just puts the ram voltage out of spec for the DIMMS. I have updated the BIOS firmware but was unable to find ANY drivers for the MOBO and chipset
from Intel.
Any ideas?? This is super frustrating

Hi Admicoker1,
If your computer not complete the POST check there must the hardware issue, ask your hardware vendor for the further help first is the best method, from you description and
base on my experience you can first try to reset your BIOS to Factory& Safe mode then try to boot your computer or confirm with your mainboard manual you have plug in the RAM to correct slot.
Best Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IMac won't boot after ram upgrade

For some reason, my iMac late 2013 3.4Ghz quad core i5 won't boot with new ram modules added. New ram is exact same specs as original that came with the iMac. I've tested the new ones on their own in the iMac, and the system boots up fine. Same goes with just using the original ram. But when I put all 4 together, the iMac doesn't boot up. Not even the chime.
Combinations I've tried are:
1-Old
2-New
3-Old
4-New
No boot
1-New
2-Old
3-New
4-Old
No boot
1-New
2-Old
3-New
4-empty
No boot
1-Old
2-New
3-Old
4-empty
No boot
1-New
2-Old
3-Old
4-New
No boot
1-Old
2-New
3-New
4-Old
No boot
The only combinations that work are:
1-New
2-empty
3-New
4-empty
Boot good
1-Old
2-empty
3-Old
4-empty
Boot good
I just got off the phone with Apple, and they are saying all modules have to be the same size. ie. all 4GB or all 8GB. Can't mix and match sizes. Which is strange, because I've never heard of this. My Mac Pro has different speed ram modules, with different sizes in it. As long as I install ram in pairs, it runs like a charm. I've even heard the new iMacs don't have to have ram installed in pairs.
I'm wondering if slot 2 and 4 are maybe damaged? I haven't tried using just slot 2 and 4. To my understanding, you have to use 1 and 3 first. Can anyone confirm this?
Also, I've read a couple of people had to wait 30 seconds for the chime when they installed new ram in their iMacs. I didn't wait 30 sec to see if it would boot. Never heard of any Mac taking 30 sec to just chime in. lol Has anyone else experienced this? Is there a fix? Tx.

CLICKY CLICK---> iMac: How to remove or install memory
Or
Apple>About This Mac>More Info>Memory: Double click "Memory Install Instructions" at the bottom right of window.
my iMac late 2013 3.4Ghz quad core i5
Conflicting info. Your system profile shows: Mac Pro, Mac OS X (10.6.8). Please update/correct.

HP 311 won't boot after ram upgrade

I bought 2GB apacer RAM for my HP 311, but when I insert it and turn on computer, nothing happens. Only power, caps lock and network lights turn on, and hard drive light keeps blinking, but it doesn't look, that HDD is being read. When I take out RAM, everything works again.Tried resseting bios, but it didn't helped. What could be wrong?Here is a picture of my ram (I think it should be suitable for this netbook (DDR3 1066)):
My ram

Are you running Windows 7 - 64bit?
HP Pavilion G4 Notebook PC Maintenance and Service Guide
From the Service and Maintenance Guide:
Supports the following configurations:
● 8192-MB total system memory (4096×2; not
supported with Windows® 7 32-bit
operating system)
● 6144-MB total system memory (4096×1 +
2048×1)
● 4096-MB total system memory (4096×1 or
2048×2)
● 3072-MB total system memory (2048×1 +
1024×1)
● 2048-MB total system memory (2048×1 or
1024×2)
● 1024-MB total system memory (1024×1; not
supported with Windows 7 64- or 32-bit
operating system)
Here is a reference Guide you can look over to see if you missed anything.
There is a Troubleshooting section you can check that may help resolve any temporary issues.
Upgrading Memory (RAM)
Kind Regards,
Dragon-Fur

Re: Satellite A660 - No boot after RAM upgrade

Similar Messages

Maybe you are looking for