Re: Satellite C660 - (PSC0QE) display driver update

Hello all you wonderful people.
I'm writing this post to inquire as to why the display driver for this model hasn't been updated since 2010?
I have been playing a favourite game of mine (Civilization V) on this model. They updated the game with a patch in November and the computer can no longer display the graphics properly because of the old drivers.
I've done my research on the gaming forums to try and fix this and after looking at my dxdiag its become clear that the drivers are out of date. I've been on the Intel website and they have updated drivers for the card (Intel(R) HD graphics), I've downloaded these drivers however the laptop will not install them unless they are Toshiba verified? My questions are..
Why does Toshiba stop me from installing these drivers from Intel's website?
and
How do I get round all this Pfaff and update my graphics drivers?
Many thanks
Tom

> I've downloaded these drivers however the laptop will not install them unless they are Toshiba verified?
You can update the drivers within the device manager
>EDIT: Having spent a bit of time reading other threads i've managed to update the drivers
I assume you updated this via device manager right?
I did it too and it functioned.

Similar Messages

Satellite C660-1ME Display Driver needed

There is no display driver for my laptop Satellite C660-1ME PSC1SE ?:|

The NVIDIA GeForce 315M has been built in other notebook too.
Try to use the driver released for:
- Satellite C640 PSC2YE
- Satellite L730 PSK0CE
- Satellite L735 PSK0CE
- Satellite Pro C660 PSC1RE

Satellite C660-23M - graphic driver update issue

New to this forum so dont know if this problem has been covered.
Have installed Photoshop elements 11 and premier elements 11.
The elements program runs ok but cannot get get premier elements to open new project. Adobe advised trying to update drivers which I have tried without success.
When running driver update on laptop it says latest driver installed. 8.15.10.2189
On checking Toshiba update site it shows later version 8.15.10.2353.
Have downloaded this ,I then unzipped it and it says will start automatic installation when finished but nothing happens.
Have tried several times but once unzipped it will not install.
Any help would be appreciated and infact confirmation of latest driver.

Just done a direct x scan and this is an extract of results.
"Time of this report: 11/9/2012, 14:51:13
Machine name: KEITHR-TOSH
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite C660
BIOS: Phoenix SecureCore Version 2.00
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 6144MB RAM
Available OS Memory: 5938MB RAM
Page File: 3592MB used, 8282MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode
Shows DX Setup Parameters: Not found
does this mean something is missing and not starting up?

Satellite A500-1GL - Display driver update

Recently l have been having issues with an online game and latency.
As part of the support l received they pointed out that my display driver is old and that there are more up to date ones on the NVIDIA site.
However from looking on Toshiba they still list the driver as being the one from 2010 which l have installed.
Can any one please advise me,
Can l update the driver from NVIDIA?
Or does it have to be the Toshiba one that l currently have from 2010?
If l can do the NVIDIA one can any one guide me through how l go about doing it?
(the card is a GeForce GT 330M card)
Many thanks for any help :)

> Can l update the driver from NVIDIA?
Here is a thread about the similar theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74123
The point is that nVidia or ATI drivers can be installed but only at your own risk and this requires an Advanced installation procedure via device manager.
But I found out that different Toshiba notebooks were equipped with the same graphic chip.
For example:
+Sat A660 PSAW3E+
+Sat A665 PSAW3E+
+Sat P500 PSPGSE+
Usually the graphic driver released for these models should be compatible with you A500 model
Try it out

Satellite C660 - 1F1 Graphic Driver Update?

Hello,
I've been trying to get a game called Football Manager 2008 to work on this laptop for a long time. I've trawled the Internet for a solution to my problems running it, but I haven't found anything that works for me. In fact, the majority of the time, the problem seems to be solved by the person updating their graphics driver.
I've been trying to find an update that works for me, but I've not found anything so far.
Anyone shed any light on this?

Hi
From my knowledge the notebook supports the Intel HD graphic card (IntelHM55)
So latest driver can be downloaded from Intel page directly.

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Re: Satellite U500-PSU9ME - display driver stopped responding

Since I purchased the laptop I had a problem with the display driver.
The screen keeps blackout and comes back after a second with the massage display driver stopped responding and has recovered, I wish I can attach a screenshot. The laptop have nVidia card on it.
The dealer replaced it for me but even with the new one, it comes each day once or twice
This is my 1st Toshiba, I always heard they are good but now I am kind of confused!
Anyone had this problem and could solve it? Please help.
Note: i updated all drivers.

> {quote:title=MasterG wrote:}{quote}
> +@Ai1dRo0kNotBot+
> It seems you did read any other solution suggestions from other users who have experienced a similar issue with a graphic driver.
>
> In my personal opinion the failing of the video driver has nothing to do with a gpu overheating.
>
> As other guys already suggested, an display driver updated has helped!
> The others said that disabling of Win 7 aero theme could be helpful too!
>
> As you see there are different reasons for such issue and its not matter of notebook manufacturer but in my opinion ATI and nVidia are still developing the drivers for Win 7 and there are different hardware and software configurations which could affect the driver functionality!
Why not? Driver stops responding only when cpu cooler runs on minimal rpm, seems to me, that fan rpm basically depend on cpu heat (_not_ gpu).
Very good solution, but I have a question: would you buy a server that works only when you disable lan card? would you buy a car which can turn only left?
No matter. Never the less, I'm satisfied with how the Intel i3 and Nvidia 310m works.
The thing i DO NOT like and which concerns manufacturer directly is keyboard. I don't know who designed flat buttons, but it's the worst keyboard I seen EVER. You can realize my disappointment, changing eeepc to u500 expecting better and getting THIS. They could at least have upgrade for keyboard replacement, the part that cost $50 spoils $1100, wonderful...
:( I imagined my fist toshiba as much happier thing...
Message was edited by: Ai1dRo0kNotBot

Display Driver Update for Satellite L30-105

Could anyone give me an idiots guide on how to update a display driver for my Satellite L30-105 ( PSL33E ) PLEASE?

LOL. You need a idiot guide?? Come on man ;)
Ok, here is my guide;
Download the graphic driver for your notebook model.
Unzip the package.
Then access the device manager, mark the graphic card, update driver.
Then a new window will open.
There you have to use the second Advanced option.
Then choose the option called Dont search. I will chose the driver (or something like that)
Then point to the place where the driver package has been stored on the HDD and finish the installation.
Greets

Satellite A100-599 - question about display driver update

Hi,
I have a Satellite A100-599 with a NVIDIA 7600go graphic card and I have Bioshock like most of you the game crashes because of some problems with the graphic card drivers, no pb...in the meantime NVIDIA released some new patches to the Forceware and after I rechecked the Toshiba driver support database I saw a new release in the Display driver list for WinXp.
One of them seems to be from 13/09/2007. I downloaded the drivers, installed them and after I checked the driver details in the Device manager list and to my surprise the details said the drivers are from 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in the drivers archive and surprise ...the drivers are really the old ones from 2006. So my question is this: Do you have any Display Drivers for my model that work for Bioshock :D
Regards,Marian

I dont know if WE have. I think it would be took some long time to ask every single user: hey, do you have some drivers for blackmodjo? Ah, come on, please. Just a little bit of them... ;)
No, I have a better idea. Its like cooking a meal. The ingredients: DriverCleaner Pro and the website www.laptopvideo2go.com and .... ta ta ta TAAAA a lot of patience
To get some good "bio"shocked meal just follow this receipt:
Go to
http://www.laptopvideo2go.com/
read before you do anything (YES, even before you continue BREATHING) the FAQ-section on that site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
and then download the drivers. Do it, yes...
Then download drivercleaner by searching for it on www.google.com and THEN, read their Manual before doing anything else (Ok, you can continue breathing..)
After reading their manual you will something like:
1. Starting program, doing something, restarting machine
2. starting in safe mode, starting that program, removing..yadayadayada
3. Installing new driver
3. Playing Bioshock
4...
5..no..6. Thanking me and giving me your first born.. ;)
So, by cutting away around 40% of my humoristic stuff and following the constructive technical instructions from me you will be able to play bioshock.
Greets :)

Editing software crashing-do I need Display driver update for Satelite C660

Hi folks,
recently I have installed trial versions of Adobe Premier cs5, then avid media composer and neither of them are loading, (not responding) and Adobe crashes on importerquicktime.prm.
Everywhere I look it seems to be telling me I need to update my drivers, but I have the latest driver available for this model,
Is it a QuickTime issue?
Or a driver issue?
Can anyone help me or even let me know what my options are?
Thanks
Conor

Hi
In internet I could find this interesting info:
+I am having issues with the ImporterQuicktime.prm with the new update 5,03.+
+Ive been editing on a project for months, and exported a QT with Avid DNxHD codec,+
+I started another project with this QT DNxHD file (to make sample clips), and then I updated to 5.03, and now PPro CS5 runs very slow, and then locks up. I did read the forums to find a solution.+
+I noticed when re launching PPro CS5, it would hang on the Exporter, and Importer Quicktime .prm, so I tested removing the plugin from the PPro>plugin>common folder. PPro CS5 launches very quickly and runs smooth- although the QT files are off line+
It looks like its not display driver issue If the info above would not help you, you should get in contact with Adobe support

Satellite C660 - Intel HD Graphics update issue

Hello,
sorry for my English level, I'm French
I have an issue without solution with my Satellite C660 (for the moment i hope!) I downloaded the software google sketchup 8, dedicated to the architecture drawing, but it doesnt work, I always have a bug message informing that it is necessary to update de drivers of the graphic card (According to google support it seems that OPENGL functions should be implemented in the drivers of my laptop)
So I have downloaded the last available drivers for the configuration I have ( Intel HD graphics for pentium, windows 7 64 bits) ;
the link ( french website, the one for Intel is not currently available, it is an .exe document)
http://www.touslesdrivers.com/php/constructeurs/telechargement.php?v_code=37057&v_langue=fr
I have tried to manually update de graphic card driver with the device manager menu (graphics card > update the drivers button> manual file.exe selection ), but at the end there is no update, I only have a very quick message informing that windows has determinated that the drivers are already updated.
Actually there is no changes on the drivers (still the same date of the pilotes 28/07/2010 in the graphics card properties) and sketchup is still out of work
Any suggestions?
Thanks in advance

Hello
Thank you for the reply, the type of the laptop is the C660 2RG with windows 7.
Regarding the Intel HD graphics I've tried to download it directly in Intel website but the appropriate file (name Intel HD graphics for Intel Pentium and Celeron Processors with Intel HD Graphics) is not available, when you click on itn you have a displayed screen which propose to scan you laptop in order to determinate your needs
But even with this function you have at the end a message telling that the configuration is specifically done by the laptop builder and no action could be taken.
To run the application Sketchup i need, the driver must support the OpenGL components (usually available in the graphics cards driver, but it seems that Toshiba configuation has been done without it)
Thanks

Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
Any advice welcome

Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
But after this update, I was no longer be able to read my HD-DVDs
Error message was: "Unable to send the video to an external device. Please turn off the display device."
The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
I have no problem since that last update

Satellite 2430-402, Display Driver Problem

I have a Satellite 2450-201. Very often when the system comes back from Hibernate the system will not re-boot, it gets stuck after the opening logo. I have to shut it off and then then got to safe mode, and then restart. I get a message that the system has recovered from a device failure and it identifies the Nvidia Display Driver as the culprit. I have re-loaded the latest Driver from Toshiba, but if I try ANY update from Microsoft the Display goes crazy, and I have to go throught the re-boot and safe mode thing again. Any ideas on what the problem may be?

Good evening ! I had this problem with my Satellite 2430-402. Ive updated the Bios and all was fine.
Did you checked your Bios Version at first ?

Display driver update (?)

Newbie to MBP (changed from Win XP). Having a Samsung 940b connected as external display, text is a bit blurry in Gmail inside FF browser but ok in iMail. Any tips ? update display driver .. ? change some settings in System pref's .. ?
/Lars

For modern Macs running OS X the display drivers are supplied by Apple via the OS and updates supplied via software update. The MB Pro will auto-configure to the display, but you can change the settings somewhat via system preferences>displays.

Satellite T130-02F - Display Driver Error

Hi There,
I just purchased the Satellite T130-02F and after choosing 32bit running system I had the power connected to charge battery up and then started to get "display driver errors" where the screen would flash black and then flash back on. I've checked device manager and driver details, the drive is upto date and as far as I can see is the correct driver. I've searched sites to see if there ar other drivers out there, but its up to date.
I haven't installed anything extra on the computer yet and find I get the error more regularly on the battery rather than power which concerns me. The computer is less than 24hrs old.
Any advice?
Mobile Intel (R) display chip set.
Windows 7 installed 32bit.

Hi
In your case I would try reinstalling the display driver. You can find the latest version on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this make sure that the newest BIOS version is installed. You can download it on the Toshiba website too.
If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and must be checked from professional people.
Greets

Re: Satellite C660 - (PSC0QE) display driver update

Similar Messages

Maybe you are looking for