Re: Satellite L300 - Issues after Windows 7 installation

Hi,
I have a Toshiba Satellite L300 bought with Windows Vista 32bit approximately 4 months later I got out my Windows 7 64bit made it.
1st My laptop has problems start after I installed drivers give it extra drivers to go but I've downloaded drivers for Windows 7 64bit
2nd Whom do I hear music and wants to hear next song is it whom I use but ne net If the keyboards fn +?? do not go and play / pause next prevous Stop and media player tase funtionieren not only the silent weis tase of modest
P.s. translate with google
Thanks in advance
Patrick

Hi Patrick,
To be honest your posting is very hard to understand and I dont know what you mean exactly.
According your posting it seems that you need some driver and you can get all drivers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Regarding the FN keys you need Toshiba Value Added Package and Flash Cards Support Utility. Everything can be downloaded from official Toshiba page.

Similar Messages

Satellite A660-10W - After Windows 7 installation some unknown devices

So I have the Satellite A660-10W, and I reinstalled the Windows 7 it came with Windows 7 ultimate 64bit. First thing is when I use fn+F6/F7 (other combinations work) for brightness levels it doesn`t work, brightness doesn`t change. And the other thing is that there seem to be some unknown devices.
Here is everything hope someone can think of what could it be, thanks in advance. :)
Link: [http://store.picbg.net/pubpic/B4/3E/3ca598fbde5fb43e.png]

OK you and my friend are right, because I installed the video card drivers from nvidia`s website, not from toshiba, now brightness works :D
And I reinstalled Windows because one thing there were no partitions only one lonely drive and I wanted 30-40gigs for windows and the rest for stuff, not when I decide do reinstall lets say a year later with work and media on it to lose everything. I didn`t do any back ups, even all the shop assistant talked about when I bought it was to buy some dvd`s and backup, but I said I never did that before so why would I need it now, anyway now everything works perfectly, iI`m prepared for the next time :D , thanks for the help. :)

Satellite A300-14S - After Windows 7 installation no modem recognized

Hey guys, how are you?
Unfortunately, I discovered today that Modem is installed with drivers on Windows Vista 32-bit but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64-bit and: No modems at all! I don't know why device manager is unable to see and capture my device.
I need help guys.
Thank you.
My laptop is: Toshiba Satellite A300-14S

Hi dr.anm,
Have you tried reinstalling the modem driver? I have checked the Toshiba website and there I can find a modem driver for Windows 7:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Check this!!!

Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

Hi everyone.
At the beginning I'm sorry for my bad english so I will say shortly.
A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
I can't speak with friends on skype ;( Help me. I hope you know what I say.

Hello
Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.

Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

Hi,
like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
Satellite L300-26K
Using Vista 32bit home
How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
Please help - I need my notebook without external mouse (this works)
yours
Oliver
Message was edited by: enigmo

Hi enigmo,
I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

EAS Startup issue after OEPM 11 Installation and Configuration

Hi All,
EAS server is not starting up after the successfull installation and configuration of OEPM 11.1.1.2
Provider Services and Shared Services started fine and i was able to login to Shared Services console
During eas startup individually from the startup script i see this catalina.out file with some errors..
By this i understand that there is some problem in selecting the required JRE as i see both JRE and JRE-64 under the
common folder. Anybody has come across this issue while startup of EAS 11.1.1.2
Any help would be accepted...
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
Thanks,

Hi,
1. I assume your system is 64 bit.
2. I think you are installing the 64 bit application. In that case you would get both the folders i.e JRE and JRE-64.
3. Seconldy, I would like to set the permissions of the folders to everyone and give full control and test again. ( to do this, right cick ->security ->add 'everyone' -> give him full control and test).
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Photoshop CS6 Display issues - After Windows 8 upgrade

Just upgraded from Windows 7 to Windows 8 Pro (64bit). Now the background interface in Photoshop CS6 keeps changing when I click the image, the background, the layer and the crop tool. I get transparent, black and various grey. I have uninstalled and reinstalled PS CS6 with no change. I did not have an issue in Windows 7. The rest of CS6 runs fine. Can anybody help? Thanks

What is the make and model of your video card?
What is the number and date of the installed video driver?
Is that the latest release from nVidia, or AMD/ATI?
If it is not the latest, go to the nVidia, or AMD/ATI Web site, plug in your card, and your OS, then download and install the latest driver. Test.
Do not trust Windows, or any utility to tell you if you have the latest driver. Verify that from the mfgr's. Web site.
Good luck,
Hunt

Satellite U300-159 - Bluescreen after Windows 7 installation

Satellite U300-159. I made a clean installation of Windows 7 Home Premium 64bit. Since upgrading it has bluescreen at every startup after aprox 1 min. Bluescreen ***STOP: 0x000000f4. The computer restart it self after a moment.
I checked memory with 2 different programs. No errors. HDD checked - no errors.
Tried to update BIOS but get errorcode 1275 using Toshibe updateprogram.
Anybody have any ideas what to do?

Hey,
Im a little bit confused about your posting First you wrote that you made clean installation and then you wrote something about an upgrade
Whats true?
Anyway, do you notice the bluescreen in safe mode too? If not it seems to be a driver issue because in safe mode no drivers will be loaded.

Satellite P35-S6112 - No sound after Windows 7 installation

I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
Which OS have you used before Win7 installation? Have you noticed the same problem?

Re: Satellite L30D - Low screen resolution after Windows 7 installation

I have installed Windows 7 on my Satellite L30D. Since this installation, I cannot have a better resolkuton than 1024x768.*It was much better with Windows Vista.
I have downloaded the latest ATI driver. No effect. I cannot find the Catalyst Control Center as well. What can I do?

Hi
The Satellite L30D isnt known to me...
Do you mean Satellite L30 or Satellite L300D?
Normally you have to install the display driver if you want to use higher screen resolutions but check the specifications of your internal display first. Maybe the native screen resolution is 1024x768 and you cant use a higher one.
You can download all drivers for your notebook on the Toshiba website!!! Dont use the drivers from ATI directly, they are not designed for mobile chips.

Satellite P300 - Microphone doesn't work after Windows 7 installation

Hi,
I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
Thanks
James

Hi
Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this it should be possible to use the internal microphone.
By the way: Which application you use for the internal microphone? Skype or something else?

Satellite L300D-12U - Two issues after Ubuntu Linux installation

Hello,
I have installed Ubuntu 8.10 on my brand new Satellite L300D-12 U.
Up to now everything works fine but there are two things disturbing me.
1. I have problem with Suspend to RAM. It does not work. If I use the standby option, the screen becomes black but the notebook is still running (you can hear it).
Furthermore nothing happens when I press the Power Button to exit the standby option.
I have to completely shut down the notebook and restart to be back in Ubuntu.
Maybe anybody have some ideas how can I solve the problem?
My /etc/default/acpi-support have these entries:
# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true
# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true
# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
# ACPI_SLEEP_MODE=mem
ACPI_SLEEP_MODE=standby
2. Battery Life
My current maximum battery life is 1:10 hours. On windows it is > 2 hours. Maybe anybody have some configuration ideas to increase the battery time under Ubuntu?
Any help is appreciated.
Thanks in advance.
Regards,
Manuel

Hello Manuel
I am really sceptic about Linux support here. I've heard that Toshiba will start some support with Linux but obviously it is not started yet.
If nobody here can offer some help I recommend you to discuss this on some Linux forum. You have more chance to get some help there.

Satellite A300 - After Windows 7 installation how to get factory sate back?

I have recently installed windows 7 on my laptop and now I want to remove them and restore my computer to its factory state.
When I enter the "advanced boot menu" I select "repair my computer", then there is a menu from which I select "repair...something". Then it shows up a message which says that there is nothing wrong with my computer and that's where all end.
Any ideas???
Thank you

Hi
Did you not create the Toshiba recovery disk as yet?
I think you didnt read the user manual because there you can also find a lot of informations about this.
The Toshiba recovery disk you can burn using the Toshiba recovery disk creator. This tool is preinstalled on every Toshiba notebook but on another OS like Windows 7 its not possible.
Normally after the first start when you bought the notebook you get the following message (recovery reminder):
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
However, now its too late and you have to order a new recovery disk from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx
Bye

Re: Satellite L300 - Issues after Windows 7 installation

Similar Messages

Maybe you are looking for