Re: Satellite L300-PSLB8E runs super slow on Windows XP
I have a Satellite L300-PSLB8E. It came with Vista Home Premium. After I made my recovery DVDs, I made a SATA disk from the drivers downloaded from the Toshiba website. I did the F6 thing, but kept still getting a blue screen when the setup program got to the "starting windows". I changed the SATA from AHCI to Compatibility in the BIOS and then managed to install XP without the SATA Disk. What is strange is that the sound lags and the disk access is super slow. I ran a speed test program and it showed that the HDD performance is only 5% of the performance in Vista. I have actually tested this on another identical laptop that was downgraded and it had the same problem. Any advice? Is it the AHCI Mode?
I think your have simply used wrong SATA drivers.
The point is that you need the SATA files from the Intel Matrix Storage Manager (if your notebook supports Intel chipset.)
So the SATA driver can be downloaded from the Intel website; search for Intel Matrix Storage Manager.
On the Intel page you will find a different packages; One with the .exe file and the other with dll files. You need the one with dll files in order to include the files using the nLite!
Last but not least check what Intel Matrix Storage Manager supports your chipset. The Intel page provides ALL details!
Bye
Similar Messages
-
My MacBook Pro is running SUPER slow. When I start up my computer it takes forever to load up, when I play World of Warcraft it is painfully slow with logging in etc. Everything about starting a program takes forever to load up and then once you are in the program everything is super slow. My husband's macbook pro is a 17 inch 2009 and works WAY better and faster then mine. Also, i don't know if this is a related problem, but the power drains VERY quickly. For example, If I have a MS OFFICE program on I could be at 100% hooked up to my power and then if I go off of my battery, the battery life will only last about 30 to 45 minutes MAX.
Here are the deets on my MacBook:
17-inch, Late 2011
Processor 2.4 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software OS X 10.9.3
Suggestions? Thanks!Have a look here...
macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
Basically...
1) Make sure you have enough Free Hard Drive space for your Mac to Perform as expected...
Rule of thumb is about 15 to 20 GB
2) And adding more RAM is always a prudent move... (4GB of RAM is a minimum for Mavericks... 8GB at least would be better.)
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
Go to http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it...
Also see > OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895 -
My iphone 3 has just started running super slow all of the time. Also about the same time while on a call my screen is freezing black and I am unable to hang up with the caller. It is driving me crazy!!!!
try hard reset ( hold the sleep and home button together for a few second the iphone will restart and then the an apple logo will appear)
if this didn't work try to restore you iphone and check if there are any updates available -
In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?
Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie -
My computer is running super slow. I can correct the problem briefly by zapping the PRAM but is resumes as a problem after a few hours. I have good time machine (capusle) backup daily. I have done a disk verify and there doesn't appear to be anything wrong there.
Help, this is wasting a lot of time to do simple functions.Hard to say what's going wrong without more information. Try the troubleshooting steps in my Mac Performance Guide. Post back if you need help with any of that or questions about the results.
-
SSD and HDD Installed but it runs super slow? Please Help!
Hi, I have a late 2011 Macbook Pro 2.2 GHZ Intel Core i7
8gb of ram. My hard drive died in my mac and I decided to replace it with an SSD and installed an HDD in the optical bay following Ifixit instructions. I booted into internet recovery and installed Mountain Lion (as it would not let me do a straight Yosemite install from a flash drive I had made on my gf's macbook, because it couldn't authenticate). After booting up and declining the usual iCloud prompts, I rebooted and installed Yosemite from the USB. It took a while, but eventually i booted up.
I moved my home folder to the HDD a 7200rpm Western Digital Black, which is in the optical bay, (the SSD is a Samsung 340 Pro and is installed in the Drive bay). Everything appears to be functioning, but it's slower that it had ever been using Yosemite on the HDD that had died. It take 35-40 seconds just to open System Preferences. I have used First aid on both drives via the Recovery and repaired permissions on both. I have reset the ram using option-command-r-p. I have booted into Safe Mode and Restarted the computer multiple times. Just opening a second safari window causes the spinning wheel to go for ten seconds or so. If anyone knows anything I can do, please help! I'm at a loss as to what I can do to fix this.
I'm really not sure what is going on. It seems to take a very long time to load a website, but after using safari for a bit, the app doesn't seem to have a problem responding to commands, just takes way too long to load anything. System preferences is all of a sudden crazy snappy, but is giving me the spinning rainbow wheel when I try and click on a pane saying "Could not load Users & Groups preference pane." After I click "okay" and try again it loads right up. Grrr.Etrecheck report if it helps:
Problem description:
Running super slow randomly with a newly installed SSD and HDD. Home Folder is on the HDD.
EtreCheck version: 2.0.7 (93)
Report generated October 29, 2014 at 4:58:33 PM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1680 x 1050
AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3:3:27
Disk Information: ℹ️
Samsung SSD 840 PRO Series disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
QuickSilver (disk2) / [Startup]: 510.88 GB (236.99 GB free)
Core Storage: disk0s2 511.25 GB Online
WDC WD7500BPKX-22HPJT0 disk1 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Hulk (disk1s2) /Volumes/Hulk : 749.81 GB (685.87 GB free)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
Alfred 2 Application (/Applications/Alfred 2.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
QuickSilver: Disk size: 510.88 GB Disk used: 273.89 GB
Destinations:
Herbert [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 273.89 GB X 3)
Top Processes by CPU: ℹ️
48% WindowServer
11% Safari
3% hidd
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
249 MB Safari
241 MB installd
163 MB Finder
155 MB mds_stores
155 MB DesktopServicesHelper
Virtual Memory Information: ℹ️
1.52 GB Free RAM
3.89 GB Active RAM
1.82 GB Inactive RAM
1.34 GB Wired RAM
3.25 GB Page-ins
143 KB Page-outs -
When I turn on iCloud in iPhoto everything starts to run super slow.
This has been happening for a while but since I have a MacBook Pro that I don't have this problem on, as well as my iMac which i do have this problem on, I haven't worried about it but now i'm getting annoyed. When I open iphoto, without photostream on, everything is fine. As soon as I click on photostream or icloud everything in iphoto starts running super slow. If I click on a photo it takes about 10 seconds for it to highlight, scrolling is about 10 seconds behind as well. If i close iphoto with icloud on, it will not open back up. I get a error report. If I turn off icloud/photostream then everything is fine. I can scroll through my pictures with no problem at all. I have about 400 pictures on my mac. Anybody else have this problem? Anybody have a fix?
This has been happening for over 6 months, before Mavericks and before my current version of iphoto.
Here are my specs:
iphoto v 9.5.1
iMac 21.5, mid 2011
2.5 GHz Intel Core i5
16GB 1333 MHz DDR3
AMD Radeon HD 6750M 512 MB
OS X 10.9.2 (13C64)
I have 270 GB of free space.
Thanks in advance.What generation is your iPod? My sister's 2g/3g(I'm not sure which) was doing something similar, but it would put a different graphic on the screen every time. We took it in to the apple store and they didn't determine what it was. One thing they said to try was to restore it and gradually add content on to see if it's an app or something loaded on it. If that doesn't work then they said it's probably something in the software or firmware. They gave her the option of getting one exactly like the one she had or getting the new one like I have. She ended up getting the new one on sale at target.
-
Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again
Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :) -
I have a brand new curve 9380 and I will have no APPS open but it still runs SUPER slow when I shut it off the screen and ill try to turn it on it wont turn on no matter how many times or how hard I press it and then a solid 5 minutes later it will turn and and the screen will just go on off like crazy because its running so slow it takes me 10 minutes just to change my BBM picture. Please help.
There may be no Apps open but there are apps that can run in the background. Please check the apps installed in your phone.
Goodluck
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter -
Ideapad G560 running super slow
Hi,
I have a 3 years old Ideapad G560 with
4GB RAM,
1GB Nvidea
500GB HDD (WD 5400 RPM),
Intel core I3 processor.
It was working fine until once the HDD was crashed. I somehow manage to recover it by deleting all drives.
Now I have installed Windows 7 pro, but the problem is it is running super slow. Especially when I try to open any program.
I think I need to replace the HDD. I am thinking to get SSD rather.
Please suggest which is better, I really need a high performing one.
Thanks in advance.
Solved!
Go to Solution.please, see the documentation below for supported devices:
http://download.lenovo.com/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/G460-G560/Lenovo%2...
ps: please, mark the thread as solved if it is. -
I have a black 13" MacBook that recently started running super slow. It loads slow. The mouse moves normally, but when I click on anything it can take two minutes before anything happens. It runs slow when I boot it in safe mode. I tried running some utilities from the os disks and they didn't find any problems. I don't know what is wrong with it, or how to help it. Thanks for your help.
A new user account does nothing to help. It is still super slow
Gotcha.
So you have a systemwide issue then (not just a single account).
Did this start happening after you installed some new software or maybe an Apple Software update?
Did you add any new hardware to the computer like RAM or an hard drive?
Are you running any Anti-Virus or Firewall software on the computer (doesn't come with the Mac so it would have had to been installed by you after the fact)?
_Turn off your Airport by going to the airport menu and choosing Turn Airport off.
_Unplug all external devices besides the power cable.
_Restart the computer. -- Any change?
If not:
_SafeBoot the system and while in SafeBoot remove the Macintosh HD > Library > Caches folder to the trash.
_Remove any items in Macintosh HD > Library > StartUp Items
_Reset the PRAM: http://support.apple.com/kb/HT1379
_Any change?
If the issue persists at this point I would backup your data and reinstall the Mac OS (with 10.6 this does not erase the computer, it just puts the OS back on the computer):
_Insert your Mac OS X 10.6 installation disc
_Shut down your Mac.
_Start up your Mac while holding the C key to start from the disc and follow the onscreen prompts to reinstall. -
My mac mini is running super slow
My mac mini is running super low. It has been for a long time. All applications work but it take so long to do anything. The mac mini is mid 2010. It can not run several application at the same time.
Problem description:
my system is running super slow
EtreCheck version: 2.0.11 (98)
Report generated November 10, 2014 at 11:22:00 AM EST
Hardware Information: ℹ️
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Cinema Display 1680 x 1050
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 4:54:26
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.88 GB (122.41 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
HL-DT-STDVDRW GA32N
USB Information: ℹ️
HP Wireless Optical Mobile Mouse
HP Photosmart 6510 series
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Wondershare AllMyMusic.app
[not loaded] com.Perfect.Driver.SystemAudioRecorder (1.0.0 - SDK 10.6) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.bose.bluetooth (1.0.0) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSB (1.1.0) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) Support
/System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
[not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.hp.lightscribe.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.nds.pcshow.plist Support
[invalid?] com.nds.pcshow.uninstall.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Wallpaper Wizard Lite UNKNOWN (missing value)
iTunesHelper UNKNOWN (missing value)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
CFAgent ApplicationHidden (/Applications/Clickfree/CFAgent.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.660 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
LogMeIn: Version: 1.0.660 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.660 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6
GarminGpsControl: Version: 4.0.1.0 Release - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
SlingPlayer: Version: (null) Support
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
14% nsurlsessiond
11% cloudd
6% WindowServer
2% bird
2% coreduetd
Top Processes by Memory: ℹ️
75 MB QuickLookSatellite
69 MB com.apple.iTunesLibraryService
45 MB mds_stores
41 MB discoveryd
32 MB WindowServer
Virtual Memory Information: ℹ️
27 MB Free RAM
511 MB Active RAM
506 MB Inactive RAM
516 MB Wired RAM
12.30 GB Page-ins
631 MB Page-outsUpgrade the memory to the max of 8 GB.
Also this two processers
14% nsurlsessiond
11% cloudd
are associated with iCloud/iCloud drive and should decrease after the iCloud drive is fully populated -
Macbook pro running super slow after downloading Lion
My mac book pro is running super slow after downloading Lion. Its so slow and all I see is the beach ball wait icon. Also my safari and firefox internet apps crash like crazy. What can I do? Hate it!
Hi,
I also have this problem. My MacBook pro was brand new in august, but i bought it just a few days before the release of lion so i installed lion after i bought it. Only used it 1 day with whatever was on it before and seemed to work fine.
Ive been too busy to do anything about it but im very annoyed by how slow it is so i have to do something now, what can I do? can someone help with some specific steps? someone posted something about changing the network settings but I wasnt sure if that applied in europe (spain)... any guideance in non-technical terms please?
THANK YOUUU -
Don't know why phone has been running super slow at times lately more frequent... And crashes when I'm in the fb or google app.. I reset network settings but doesn't help it
try restart
https://www.apple.com/support/iphone/assistant/phone/#section_1 -
Itunes freezes, runs super slow
I had been away for some time, so had missed several updates. Therefore I don't know at what point some of these issues might have arose, all I know is that they are all here now.
I recently updated Itunes to 12.0.1.26 and I am absolutely miserable with it!!
It's bad enough that they've removed the tools I always used for navigating (and call this progress??!!).
But now everything is running super slow, and nearly every action I attempt to take, whether it be to simply listen to a podcast, refresh, switch from podcasts to music, delete an episode, go from the store back to podcasts or music, etc., causes everything to freeze, and sometimes it stays frozen for well over a minute.
If I listen to a podcast on the PC, which I often do while working, everything else I do on the PC, be it open a file, go to on the internet, etc., causes the playback of the podcast to distort or start skipping.
Also, it used to be that episodes that did not download (usually because I was unavailable to refresh for a day or two) would still show up in my list of subscribed podcasts. This is now gone.
Also, it used to be that if you had certain episodes of a podcast but did not subscribe to it, you could right click that podcast and click on a link that offered you the ability to see all available episodes. This too is now gone. WHY????????
I haven't even tried yet to sync my ipod, am afraid of what damage it might do.
Is this normal? Can I get rid of it somehow and go back to version 10 or 11 something wherever I used to be? I created a system restore point before updating Itunes, am tempted...
Please can someone offer help?I have huge issues with my ipod classic since the itunes 12 upgrade. The first time I synch'd it, it went very wrong and got an unknown error. I tried many tips from fellow users, yet nothing worked. And all my music was gone from the ipod. After hours trying to sort it out on my own, I decided to reformat it on my PC laptop to see if my ipod sofware was up to date. It was but the good news is my ipod was resurrected from its vegetative state. I can now sync on my mac mini. Alas, the new problem is now with the ipod which has become very slow to respond. It was working like a charm before itunes 12. I would like to downgrade Itunes but I have not succeeded so far. I only found 10.6.2 (i think) but then I get error messages. What a nuisance. Any help would be appreciated. Cheers
Maybe you are looking for
-
Problem in creation of order relevant - intercompany invoice
Dear all , I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made. Send ur email id so that the problem can be described if requ
-
How do I have two audio clips overlapping each other?
I have a project where we have to make a music video, and I wanted to start working on the audio. I have an audio clip of the instrumental without me singing the song. I made a separate audio clip of me just singing the song because I wanted to be ab
-
Black screen with white apple logo won't go away! Help please.
Last night I turned theipod completeley off and restarted it. The black screen with the white apple logo came on and hasn't went of since. I've tried everything I could find in the forums and on the support page. iTunes will not recognize my ipod whi
-
Is there a security issue using a swf in Acrobat that references and xml file ? When I embed this paticular swf .. all scripts in it are seemingly disabled ?
-
Install weblogic server 6 with sp1 failure in W2K
When I install weblogic server 6 with sp1 in W2K, InstallAnyWhere display, when InstallAnyWhere process 100%, there is nothing in my display about the Install. there is weblogic600sp1_ and javaw in Windows Task manager->process. I have install JDK1.3