Re: Satellite L350-262 - The wireless connection adaptor is disabled

Basically my laptop is a couple of weeks old, it was working fine wirelessly until suddenly one day it stopped, it nows says The wireless connection adaptor is disabled, how can I resolve this? any suggestions?
Thanks

Can you please provide more details?
Can you see the WLan card in device manager?
Are there any yellow exclamation marks?
Does the other FN buttons work properly?
Is your BIOS up to date? Did you set it to default settings?
If not do this!
Last solution; try system recovery. This will set the notebook back to factory settings.

Similar Messages

  • Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

    +Sorry for my English, is not my native language.+
    Hi,
    I expose my problem:
    I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
    Laptop configuration:
    * Windows 7 Ultimate 64 bits (with all updates installed).
    * All drivers updated properly.
    * With the latest version of BIOS.
    Router:
    * Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
    Configuration of router:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, this channel is relatively free).
    * Channel width: 40 Mhz.
    * Maximum tx rate: 300 Mbps.
    Other information:
    * The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated firmware.
    * I have tried all settings of the wireless card.
    * Bluetooth off (without interferences).
    * {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
    Thanks in advance,
    Greetings.
    Message was edited by: Xibalba

    Hi buddy,
    > I kept O.S. original for a week and the problem was the same
    If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
    Furthermore ask the manufacture of your router if they know something about this.
    In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
    Good luck! :)

  • Cannot register product key for my Satellite L350-262

    I have only had the laptop for 3 weeks it is on window 7 Satellite L350-262 model
    I have tried to register my product key and it keeps saying invalid what can i do ? plz
    It also keeps saying that some files on my c drive are corrupted i have tried backing it up to see if it gets rid of them but nothing happens

    Dear Paula
    Who knows what is wrong there.
    I recommend you to do follow:
    -all important data saved on partition C move to partition D
    -install operating system again following this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    All data saved on partition D will be still there and you will have clean preinstalled operating system without corrupted files.
    Bye

  • After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

    After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system
    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    HP – Wireless Printing Center
    HP – Printer Not Found During Wireless Installation

  • Satellite P300-18M no wireless connection with Win XP Pro

    Hello people!
    I recently bought a P300-18M and installed WinXP Pro SP3 on it. Everything works fine except the wireless connection. It sais the switch for wireless connection is off, since it cannot find any networks, though the switch is on and the wireless LED is lighted up.
    I've checked the FN+F8 hotkey, i've selected wireless only here...
    I downloaded the most recent Intel 5400 drivers for the network card, but still it won't find any networks :(
    Who can help me out?
    Greets from holland, Leon

    Hi
    There is also a WLan switch at the notebooks side.
    This switch must be enabled too.
    Please check this!
    Additionally you could check the WLan card properties in device manager.
    There should be a tab called Advanced.
    There are different settings which you should check. For example you can choose the different Wlan standards like 802.11 A B G etc

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

  • How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

    Plug in ethernet .. in the computer.. turn off wireless.

  • Airport keeps dropping the wireless connection to my network 2 or 3 times a day.

    Hi,
    Since apple's recent firmware update for my macbook pro, airport keeps dropping the wireless connection to my network 2 or 3 times a day. It then searches for a network but can't find it, but if I select my network manually it connects immediately ???
    Any fixes for this ..... in layman's language please!
    Thanks,
    Steve

    It is not the router. There are a number of factors that are involved. If the router is a G/N router you may have to switch to G-Only (or disable N). You may also have a 5 GHz wireless phone or other routers in the neighborhood interfereing with the signal.
    Try this:
    1. Open network preferences. Take note of what IP address is assigned. Then, click Advanced.
    2. Click on TCP/IP and select Using DHCP with manual address and type the IP address below that.
    3. Click OK.
    4. Set your Router to Wireless-G only (or disable N) and change the channel to 11 or some higher number.
    This should keep it from dropping the wireless connection. It is a bug in the OS. Apple has not fixed it in 3 years.
    You wireless connection will be a tad slower, but you really won't notice.
    Hope that helps.
    DB

  • Want stream Netflix to blueray via Airport Express wifi. The blueray finds my wifi but the wireless connection failed - said, Ensure DHCP server is enabled on router and restart router. Don't think I have DHCP server. Suggestions anyone?

    Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?

    I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
    Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
    If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
    Perhaps another user who has figured out how to do this will post with some input.

  • Restarting the computer and re-establishing the wireless connection

    I am a wireless newbie. I just got a g router  and established a secure wireless connection. When I restart the computer it seems like I have to reestablish the wireless connection with a wired connection before it will log me in to my wireless connection. Is this what happens? Also, now when I try to "view available wireless conncections" it has my SSID but since it's secured I need a password of some kind to access it. I don't recall signing up for a password so I don't know it. any help would be greatly appreciated.

    Hi…I would suggest you to login in the router setup page from your wired computer, through internet explorer by typing in 192.168.1.1 in address bar > skip username and > enter admin as password. Click Wireless Tab > second sub Tab Wireless security, you will find your wireless network key or wireless password that you need to enter on our wireless computer while connecting to your wireless network. Once you get connected to your wireless network it will not ask you to enter your wireless security code or password even if you restart your computer.

  • THE wireless connection breaked

    THE wireless connection breaked on Every two Horus!

    Some folks have discovered that changing their DNS service fixes connection issues.
    The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network on your Mac will override the router settings. Try either or both of these;
    OpenDNS
    208.67.222.222, 208.67.220.220
    Google Public DNS
    8.8.8.8. 8.8.4.4

  • Cannot get the wireless connection to work on mx459

    I have tried for hours to set up the wireless connection.  I even did the usb connect method.  I enter the ip manually and it won't detect it....just keeps me looping to the detect ip automatically or use the network connections it detects.   I tried the wps button on the router, printer doesn't find it.  I can detect my network thru the lan settings on the printer, but my other computer just doesn't pick it up.   Have tried everything suggested and that i could come up with, but im out of ideas at this point....any suggestions?

    Sorry, i am trying to connect to it from an acer desktop running windows 8.  athlon II x2 215 dual core processor.  the router is a westell wireless router.   

  • After i have update my iphone 4s to 7.0.4 the wireless connection and blutooth dosnt work

    after i have update my iphone 4s to 7.0.4 the wireless connection and blutooth dosnt work

    i cant turn wifi  on

  • I recently upgraded my internet service with Comcast for faster internet.  When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why?

    I recently upgraded my internet service with Comcast for faster internet.  When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed.  I have an airport extreme...3-4 years old.  Why is the speed so different and are there settings I can change to increase the wireless speed?

    If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
    Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
    Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
    You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
    Diagnosing network issues

Maybe you are looking for

  • Debit & Credit sub-transaction for billing

    Hi Experts, Pls let me the path in ISU to create the followings and what it is importance. 1) Debit sub-transaction for billing 2) Credit sub-transaction for billing 3) debit budget billing sub-transaction 4) Credit sub-transaction for billing Thanks

  • Appreciation mail to mahaelectronics team members

    Dear Venkat,Yaswanth &Beta team, I  thank you all guys for ur sincere effort in relacing my faulty battery.now    my new battery is working well and in position. this credit goes to u all and your whole team.by due to whom i got replace battery well

  • Duet server installation error

    My  dear  duets , please request you all from the bottom of the Duet heart  : seggestion below is th java logs . pelase reply if your nto busy  it`s urgent ...... Please wait... Client log: <!LOGHEADER[START]/> <!HELP[Manual modification of the heade

  • Where is the wrap tool located in the new release of Muse (Muse CC 2014)

    I am unable to locate the wrap tool for the new release of Muse CC 2014.  Could someone point me in the right direction?

  • Missing numerical data when exporting a PDS

    We are using Acrobat 9 Pro to create fillable PDFs. The PDF is saved on our network drive and then pulled into NOLIJ which a internet based database program.  When we were saving docs as TIFs, there was no problem ( I know it is an image file).  Now