Re: Satellite L50-B05D can't load Win 8.1 - bootable device not found

Hi
I have a Satellite L50-B05D and I recently downloaded the bios update and I applied it to my system. When I did it said that it contained the update already. After being on the laptop for a while, I closed the lid and it turnt off. When I turnt it back on Windows wouldn't load up and a message of bootable device not found occured.
Any help is appreciated
Thanks

Did you check the HDD status on the first BIOS page?
If HDD is OK, the first BIOS page should provide the info about the connected HDD (HDD name)
At the other hand the HDD might be faulty if its not listed on the first BIOS page.

Similar Messages

I purchased lots of music yesterday from itunes and now i can't export to ipod because files are not found

I just purchased lots of music yesterday from itunes and amazon but now can't load onto ipod because files are not found.

elkelawdog wrote:
I think I had an old itunes id.
Either you did or did not. Do you not remember?
elkelawdog wrote:
But it never let me burn them to anything other than my Ipod.
Media is not burned to iDevices. Burning an iDevice would destroy it.
Why will iTunes not allow you to sync media to the iDevice? What happens when trying to sync media to an iDevice?
elkelawdog wrote:
I changed my password so now when I pull up my account there is no music.
Changed password to what?
Pull up what account?
What does this have to do with iTunes?
One does not pull up an account to access their media, they simply launch iTunes.
Changing a password has nothing to do with accessing the media on the computer when one launches iTunes.
What is the actual issue that is occurring?
elkelawdog wrote:
Can anyone tell me how to find my old account and then copy that music to my HTC One.?
iTunes has nothing to do with putting media on a non-Apple device.

Launch Wine programs from menu: FIle not Found

I have installed eMule with wine, and get the "File not found" message when running it from the menu.
This was discussed in THIS thread, but none of the possible solutions work for me
Original:
env WINEPREFIX="/home/daerunarch/.wine" wine C:\\windows\\command\\start.exe /Unix /home/daerunarch/.wine/dosdevices/c:/users/Public/Start\ Menu/Programs/eMule/eMule.lnk
Doesn't work
Edited the menu entry with alacarte:
wine 'C:\Program Files\eMule\emule.exe'
doesn't work
wine '.wine/drive_c/Program Files/eMule/emule.exe'
doesnt' work
wine "/home/username/.wine/drive_c/Program Files/eMule/emule.exe"
doesn't work
wine "/home/username/.local/share/applications/wine/Programs/eMule/eMule.desktop"
dosen't work
Also all the previous begining with "env WINEPREFIX=" instead of "wine". Nothing worked o_0 What should I try now?
Last edited by Daerun (2011-02-13 23:36:46)

Null, the problem is not running from gnome menu. I can make it run from console, and it shows these messages, just in case there's some hint here:
wine '.wine/drive_c/Program Files/eMule/emule.exe'
wine: cannot find L"C:\\windows\\system32\\winemenubuilder.exe"
err:wineboot:ProcessRunKeys Error running cmd L"C:\\windows\\system32\\winemenubuilder.exe -a -r" (2)
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),4,3,(nil),0,(nil)) - stub!
err:ole:CoGetClassObject class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
err:ole:CoGetClassObject class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
err:ole:create_server class {5c63c1ad-3956-4ff8-8486-40034758315b} not registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {5c63c1ad-3956-4ff8-8486-40034758315b} could be created for context 0x17
err:winediag:WSASocketW Failed to create a socket of type SOCK_RAW, this requires special permissions.
err:winediag:IcmpCreateFile Failed to use ICMP (network ping), this requires special permissions.
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c914
fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:shell:IAutoComplete2_fnInit ACO_FILTERPREFIXES not supported
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca34
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca38
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca4c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca1c
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca48
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033ca48
fixme:shell:IAutoComplete2_fnInit ACO_FILTERPREFIXES not supported
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c9e8
err:listview:LISTVIEW_WindowProc unknown msg 108a wp=00000000 lp=0033c9e8
fixme:richedit:ME_HandleMessage EM_GETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETLANGOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
Karol, that command didn't do anything for me...
Turvyc, I know about aMule and have used it, but stuck to eMule because of some features it didn't have. If I can't run eMule I might as well return to aMule, as I know how to migrate configurations.

Load: class oracle.forms.engine.Main not found Stuck at loading Java Applet

Hi there
I have recently installed App Server 10.1.2.0 on a new machine.
Copied all my forms to an appropriate directory. Set up formsweb.cfg to allow them to run and have attempted to run them.
Unfortunately I get stuck at the Loading Java Applet screen, and in the status bar at the bottom it says :
load: class oracle.forms.engine.Main not found
I have taken a look at the Java Console, and the 2 things that jump out at me are that it appears to be looking for a forms90 directory, which seems odd since I am using App Server 10.1.2.0.2 and Forms Builder 10.1.2.0.2 meaning it should be looking in a forms directory not forms90 directory shouldnt it ?
And also, it mentions class with no proxy, so on looking around the forums it has been suggested that put the proxy details into jinitiator, which I have done, but this has made no difference either.
Can anyone suggest anything else please ?
Java Console log follows.
Thanks a lot
Scott
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\hilliers
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Unregistered modality listener
Removed trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,layout=java.awt.BorderLayout]
Sending events to applet. STOP
Sending events to applet. DESTROY
Sending events to applet. DISPOSE
Sending events to applet. QUIT
Finding information...
Releasing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=0
Caching classloader: sun.plugin.ClassLoaderInfo@d9850
Current classloader cache size: 1
Done...
Registered modality listener
Referencing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=1
Added trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,invalid,layout=java.awt.BorderLayout]
Sending events to applet. LOAD
Sending events to applet. INIT
Sending events to applet. START
Determine if the applet requests to install any HTML page
HTML Installation finished.
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

You're a star, thanks.
In my haste I had cut too much out of my old formsweb.cfg file and not realised I'd done it.
Thanks Francois.

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found Help!

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found

Then, talk to the person running the lab.

My computer wont start up says boot device not found how can i fix that

I HAVE AN HP PROBOOK 4430S
SERIAL NUMBER {Removed for privacy}
THE ERROR MESSAGE IS BOOT DEVICE NOT FOUND HOW CAN I FIX THAT ERROR

Hi:
Go into the BIOS and run the hard drive diagnostics test and see what that reports.
Sounds like the hard drive failed.
Paul

Satellite L50-A-1CU - Problems loading dam.sys and nvinitx.dll

Hi
During the past 20 days, not in relation with a nvidia driver update, I find,each and every boot, the same 2 entries in the system log:
can't load dam driver and Custom dynamic libraries are bein loaded for every application (this related to nvinitx.dll)
I've updated the nvidia drivers to the last rel., retrofit to the last official rel. from toshiba again same errors. The dam.sys file is in the correct position, same for nvinitx.dll, McAfee LiveSafe active and updated, no malwares.
Starting in the same moment the vindows image visualizer no more permits the use of horizontal arrow keys to go back and forth in the images (but it uses them correctly for other purpouses).
Apparently no other signals of malfunctioning, if I exclude a (quite little) delay in "fill" or visualize the desktop icons just after the boot.
Any help welcome
Marco

Hi
The dam.sys file is related to the Microsoft desktop activity moderator and I doubt that this has something to do with the nVidia driver.
The nvinitx.dll belongs to the nVidia driver but it seems that the nvinitx.dll errors happen when your system becomes misconfigured or important system files are missed or get damaged.
From my point of few an simple nVidia driver reinstallation would not fix the issue in case the system would be misconfigured.
You could try to repair the registry and to clean the system using tools like CCLeaner.

TS4006 i tap on the app on my phone and can not access; erro loading content, the server unavailable or not found

When i Tap on my apps - like Direct TV from my phone i can not access the site. this is with weather site etc.
the error message "site not found" server stopped responding; or no server found.

Firstly, DO NOT post imie numbers on a user to user forum - it is not safe to do so and your are NOT talking directly to Apple here.
Secondly, you need to go back to Apple in the country in which you bought the phone and get help with it there. Go back to the Apple store in the country in which you bought the phone. The warranty on the iPhone is not international, so is only valid for the country in which you bought it.

When i load a page i get "server not found", when i click retry it loads properly, what can i do to have firefox load page first time

When i load a page it often tells me "server not found". When i click on retry most of the time it works. How do i fix it so that it works the first time.
== This happened ==
Every time Firefox opened
== a couple months ago

You either have an extension that causes that issue or some security software (firewall) is causing a delay.
See [[Troubleshooting extensions and themes]]
Also make sure that Firefox gets full unrestricted access to the internet.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.

Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.

You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.

How to load specific driver for specific device not having PnP-ID?

Hello,
as mentoined in a previous post I'm up to adapt an exisiting PCMCIA-based PC Card driver so that it can be used with a PCMCIA/USB adaptor (by using it's driver's IOCTLs), and already had
some success on it: My driver loads and I can read files (for example, in Windows Explorer) from the card as it did before in "PCMCIA version" (I intend to support both with the same driver, which seems
to work at the moment). As it did before, the driver currently creates a MTD (memory technology device). My main "problem" is how to load the driver.
The situation is a bit complicated, I try to give as much details as possible.
For better understanding
The PCMCIA/USB adaptor's driver usually has following device stack: PCMCIA/SUB adaptors driver -> USB mass storage device (USBSTOR.SYS) -> Diskdrive (DISK.SYS [->PARTMGR.SYS]). For more ease - to see if my driver works in general - I installed my driver
via INF using the PnP ID of the "USB mass storage device", with other words I "replaced" the USB mass storage driver with my own driver.
This is my problem
This means - and that is currently my problem - that may driver gets loaded regardless of what is attached to the PCMCIA/USB adaptor. Usually, when attached to PCMCIA, the PC card has a PnP ID the driver can be assigned to. In my case, I have no PnP ID for
the PC card, and the driver may stop because the attached device is not supported The driver will unload properly, but the device remains with error code (in device manager).
What I want to avoid
I already thought about filter drivers between USBSTOR and the PCMCIA/USB adaptor's driver (#1), or above the USB mass storage device (#2). If I'm correct, that means that I have to handle URB/CBW requests for case #1 or at least SCSI requests for case #2 -
but I'm currently not familiar with filter drivers, URB/CBW and/or SCSI. Porting the driver was quiete frustating until yet and I had to get familiar with a couple of technologies that belongs to the driver's functinaliy itselfs -
I hope you understand that I want to avoid getting familiar with more technologies than required.
I think there must be a way to check the device (PC card) at the PCMCIA/USB adaptor
before my driver will be loaded, as well as removing the deivce completely if the PC card was removed (so that it disappears in device manager). But I'm currently have no idea how to do that. Is it possible to
load my driver along the device/driver stack usually created by the PCMCIA/USB adaptor's driver?
Some answerers likes to refer to WDK documentation and samples. In such case - because of their complexity, it would be nice to get a hint about where to start.
Have much thanks in before for any suggestions!
Regards,
Willi K.

Today's memory cards (like CFC) manage their FTL (flash translation layer) in their firmware. Our PC card is quiete old technology and does not have such firmware, this is why Windows cannot recognize the file system (FAT). For example, a request to offset
0 may be somewhere else on our PC Card.
I followed your suggestion and used the HWID of device that appears "above" the USB mass storage device, and my driver seems to work as it did before - OK, made no difference.
But if my driver does not recognize the card (because it is not present or it is another PCMCIA device -> STATUS_NOT_SUPPORTED or STATUS_NO_MEDIA in driver entry), and the device is shown with exclamation mark in device manager.
Two questions remain:
- How can I ensure that other drivers may attach if my driver does not support the device inserted in the adapter?
- How can I force a "re-check" of my driver if there was no card present when driver was loaded?? -> Note: A disk drive always appears in device manager - regardless if a device is attached to the apator or not

Firefox does not load pages, comes back with server not found

First I thought this was a problem with Firefox 4 beta but now I am having the same issue with 3.6.16
About 70% of the times, Firefox does not open the web page and comes back with "Server not found" message. Interesting thing is it comes back with this message on the first 2 tries and then on the third try for the same link it will display the page. Always, 2 fails and 3rd time it works. Now during the first two times, internet commnection is working and if I try the same URL on IE it works without any issues. This started happening after I tried Firefox 4 beta. 4 is not uninstalled and I am back to 3.6.16. But the issue remains.
I am using Win 7 64 Home Premium, SP1 is not applied yet but all updates are in place.

Well, I'm using Firefox 4.0 and have the same problem. I tried to open my private homepage and my *.net-domain comes back with the "Server not found" message (my *.com-domain loads without any problem - same contents on both websites)
I also tried to open my net-domain in FF portable - without any problems.
Clearing the cache, deleting the cookies etc in FF4 does not help either.
I also had the experience that FF4 does not load CSS5 websites (e.g. deviantart) properly (CSS does not work, website shows simply the html-version, a disgusting look). With FF portable the problem does not exist.
I tried this on different machines (e.g. Windows XP Pro SP3 (office PC), Win7 Pro 64, Win Vista SP2... (home PCs) and there I'm experiencing the same issues with FF4 and various websites.

How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
'''File not found '''
Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
* Check the file name for capitalization or other typing errors.
* Check to see if the file was moved, renamed or deleted.
TRY AGAIN.
<nowiki>****************************************************</nowiki><br />
This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
[EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

Thank you for your response, Cor-el.
I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

Can I display a message when Flash is not found on the iPad?

Apple is obviously rejecting Flash to protect it's 'App' revenue. I've been on Android phones that run Flash and display all my content perfectly smooth. It can be quite frustrating how they are trying to bury it when I still have yet to see HTML5 replicate the type of interactive content Flash is capable of producing.
Is there any way to display a message on the iPad when the Flash player is not found?
I'd like it to says something along the lines of:
"Unfortunately the Apple iPad does not support the Flash player because their business interests do not want it taking away from their App revenue.
Did you know that the Dell Streak, HTC Flyer, Blackberry Playbook, Motorola Xoom, Samsung Galaxy Tab, Toshiba Thrive, and HP Touchpad all support the Flash player?"
My HTML code looks something like this...
<html>
<head>
<title>My Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#ECECEC" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<body onresize="setFlashSize()">
<div id="flashid" style="width:100%; height:100%;">
<script type="text/javascript" language="JavaScript">
function setFlashSize(){
var viewportheight = document.body.clientHeight;
var viewportwidth = document.body.clientWidth;
var mydiv = document.getElementById("flashid");
var styleheight = parseInt(mydiv.style.height);
var stylewidth = parseInt(mydiv.style.width);
if (viewportwidth<880){
document.getElementById("flashid").style.width = 880+"px"; }
else {
document.getElementById("flashid").style.width = 100+"%";}
if (viewportheight<760){
document.getElementById("flashid").style.height = 760+"px"; }
else {
document.getElementById("flashid").style.height = 100+"%";}
setFlashSize();
document.write('<object data="index1.swf" width="100%" height="100%" type="application/x-shockwave-flash">');
document.write('<param name="movie" value="index1.swf" />');
document.write('<param name="allowScriptAccess" value="always" />');
document.write('</object>');
</script>
<noscript>Javascript must be enabled to view Flash movie</noscript>
</div>
</body>
</html>

You can parse out the userAgent property of browser. Here's an article that will point you in the right direction: http://www.askdavetaylor.com/detect_apple_iphone_user_web_site_server.html

Re: Satellite L50-B05D can't load Win 8.1 - bootable device not found

Similar Messages

Maybe you are looking for