Re: Satellite L500-19X - Webcam application start with Windows

I have lost my Web Camera Application from off the desktop.
I can bring it back by going to the Web Camera Application / Program files(86) / Toshiba/ Web Camera Application and clicking on the Web Camera Application .exe. But it will not reappear when I boot. I have the Auto Run ticked,
My laptop is the Satellite L500-19X, Windows 7
Thanks for any help.

Thanks to all the replies I have now got the Web Camera Application working properly.
Dr.Lamp the download link you gave me has enabled the Web Camera Application.
The problem I had with installing the driver ie Windows Script Host error, not allowing me to install the driver, I overcame by not allowing the zip file to extract and install. What I did was create a new folder on the desk top, and instructed the zip to extract but not install the contents into the new folder. When all the files had been extracted to the new folder, I opened the folder and clicked on the .exe file. To my amazement and joy, the software ran and first removed the existing software, I rebooted and clicked again on the .exe and the software installed. I now have the web camera application on my desktop and it re-appears after a re-boot.
Message was edited by: Altone
After reading the replies that was given while I was writing my last post, can someone enlighten me regards whether the action I took was the correct action to take, I am concerned that I may still have further problems regarding the 'Error message Cannot find script engine'

Similar Messages

  • Creating Win 7 64bit Recovery Disc for Satellite L500-19x?

    My new Satellite L500 - 19X came pre-installed with Win 7 - 64 bit version.
    Also included was a "Product Recovery Win 7 32 bit" disc
    Within the packaging was a leaflet saying:
    "If you plan to use the 64-bit version at a later stage, please create a _recovery medium_ prior to installing 32-bit Windows 7"
    It then cautions me to create a "64 bit recovery medium.....ordering a 64-bit recovery medium is not free of charge"
    The manual goes on at length about "_System Recovery Options_" As instructed in the manual I have made a "Repair Disc Windows 7 64-bit" Am I correct in saying that I do not or cannot have an actual Win 7 64-bit disc?
    The leaflet says "a backup copy (of the Win 7 64-bit) is stored on the hard disk drive as a _recovery image_" So is this the actual Win 7-64-bit complete disc that I am after, and if so how do I get it?
    The Toshiba documentation is not clear, and I believe rather contradicts itself?
    I am confused! Anyone understand what's going on?
    JohnF.

    My confusion is because I don't understand what "recovery disc" means?!
    On the "Dear Customer" flyer entitled "+Choosing your Windows 7 Architecture+" that came with the machine it states:-
    "+A backup copy of the system (64 bit version) is stored on the hard disk drive as a recovery image+" This is what I don't understand, as I have already made a "+repair disc Win 7 64-bi+t" as well as having the "+Product recovery Win 7 - 32-bit" cd+" This cd seems to be the complete Windows disc, unless I am mistaken.
    I guess what I am getting at is do I have complete Win 7 - 64-bit in case of total failure of the machine ? (I am asking the question because you often used to get a full Windows disc with a new computer in the old days)
    Does this make it any clearer? Thanks for everyone's help
    JohnF

  • Satellite L500-19X: Win7 install won't work - stuck on syswow64 loop?

    I've tried to reinstall Windows 7 on Satellite L500-19x but it won't complete - every time I boot up laptop a white splash screen appears saying "preparing to install...may take a few minutes" but this never disappears...can get out of this screen by starting task manager and hitting escape a few times.
    When get as far as desktop things seem to be in order except for command prompt running Syswow64/sysprep/...access is denied on continuous loop, also there is a window saying "TUPIT 2" which seems to have failed as there is a "requested registry access is not allowed" in front of it.
    Would really appreciate if somebody could tell me how to fix this as it is extremely frustrating and seems to be so close yet so far to being successfully completed!

    Hi
    This message is very strange. Had read in internet about similar issues but the issues were always related to the registry problems.
    In most cases the error message appeared trying to repair the Windows OS.
    Did you try to make a clean installation?
    I think you should format the HDD firstly before trying to install the Win 7.
    Hopefully everything would be erased from HDD before starting the setup installation

  • Satellite L500-19x crashes when loading software from dvd

    Satellite L500-19x crashes when loading software from dvd. This is photoshop elements 9. Other software generally loads ok, but not always.
    Any ideas?

    Hi shownomercer,
    Have you tried the Photoshop disk in another computer to check if the installation disk is ok or not?
    What happens exactly when the computer crashes? Bluescreen?

  • Satellite C660-1CN - touchpad do not start with Windows

    Hi,
    I have problem with Toshiba Satellite C660-1CN PSC0QE.
    Touchpad don't start with Windows 7 Home Premium.
    All drivers are updated.
    Bios - lastest.
    After log on I need to click *twice* "FN+F9" and after this is OK until next reboot.
    I tried:
    several Synaptics drivers - no change.
    reinstall Windows - no change.
    Windows XP mini from Hiren - no working.
    BIOS defaults - no change
    After I installed "toshiba value added package" I can't turn on touchpad at all.

    Hi
    Did you notice a difference while external USB mouse is connected or disconnected?
    The point is that you can disable the touchpad automatically when external USB pointing device (mouse) is connected to the notebook.
    This option can be found in +Control panel -> mouse+
    In +control panel -> mouse -> last tab (Device settings)+ you can find all other options related to touchpad

  • What do I need to know to get started with Windows 10?

    QuestionWhat do I need to know to get started with Windows 10?
    AnswerWindows 10 likely looks familiar in some ways to past Windows users whether they're most familiar with Windows 8, Windows 7, or earlier versions of Windows.
    To read about what's new with Windows 10, check the sections below. To learn about Windows 10 and see it in action, you can watch this video:
    Desktop and Start menu
    When you start your Windows 10 computer, you'll see the desktop. Like in Windows 7 and earlier versions of Windows, you'll see the Start button in the lower-left, which opens  the Start menu.
    The new Start menu combines aspects of Windows 7's Start menu with Windows 8's Start screen. On the left are important links, including Settings, as well as applications you use often. On the right are Modern UI app tiles. The Start menu also contains a button for power as well as a button to expand the Start menu to a full screen view.
    Cortana
    Next to the Start button is the Cortana search field. Cortana is a personal assistant that can help you find answers, solve issues, and search for files. You can click in the box to typer to her, click the microphone to speak to her, or press the Cortana button on select Toshiba laptops to speak to her.
    You can learn more about Cortana here:
    How do I use Cortana in Windows 10?
    Action Center
    The Action Center can be used to view notifications and access settings quickly.  Hold the Windows key and press the 'A' key to open the Action Center.
    Notifications are shown at the top, and toggles for various settings are located at the bottom.
    On touchscreen devices, you can swipe in from the right to open the Action Center. The toggles on the bottom are sized so that you can press them with your thumb easily.

    Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
    Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

  • Skype does NOT start with Windows Anymore (start S...

    My Skype NO LONGER starts with Windows anymore!!! I HAVE to manually open Skype!!! I cheked the options and "start Skype with Windows" IS checked!!! I tried unchecking the option and rechecking it, made no difference!!! how do I fix??

     Just because Skype isn't starting up automatically doesn't mean it isn't trying.  Other applications you have loading at startup could be slowing down Skype's ability to start.  You can run msconfig ( Start - Run  (Wink key + R) -  "msconfig".  Under the startup tab you can see if Skype is set to start or not.  You can also uncheck everything else but Skype and see if it comes up them.  If it does, using a process of elimination you should be able to determine the application causing the probelm.  If you do not see anything for Skype you can use the registry files provided to toggle that feature on/off just as the Skype program attempts to.
    Attachments:
    Start_Skype.zip ‏2 KB

  • How do I stop iTunes from starting with Windows?

    Hi there.
    After installing iTunes 7, it launches with Windows despite there being no registry entries or Startup folder entries. I also can't find any preference settings in iTunes to change this. I don't want iTunes starting with Windows as it's a CPU hot and system drag as it is without it slowing down my startup.
    What's even more odd I find is that, if for whatever reason iTunes does NOT start with Windows, I don't have an Internet connection. It's strange but the connection between the two is absolute. If I reboot and iTunes starts with Windows, I have my Internet back.
    Any suggestions? I can't find anything through searches. I've also checked for viruses, spyware, backdoors, etc.
    Thanks.
    Custom   Windows XP  

    It turns out it was the Yahoo iTunes plugin.

  • Remote control not starting with window

    Hi there
    I have a X-Fi? sound card, with a remote control... I just want it to start with windows, but if I check " Acti'vete the RC when Windows Starts" , I still have to do it manually...
    I've already tried to reinstall entertainment center, but it has no longer effects on it.
    Do you know what I have to do ?
    What kind of registry key should I add to get it automatically ?
    Or, at least, what kind of shortcut do i have to put in "start" directory ?
    Lots of questions, just problem
    P.s. : sorry for my english speaking

    I had to go through this process when an iCloud shared photostream would not display on the Apple TV screensaver.
    Two easy solutions.
    When you press the Menu button, does the Apple TV light blink? If not, go to the Second option below.
    If yes, begin with the First option below.
    First option:
    Reboot Apple TV. Hold down the Menu button and the Down button at the same time until the light blinks, then unplug the device for six seconds, and plug it back in.
    After the Apple TV reboots, see if your remote is working. If not, continue to the second option.
    Second option:
    Un-pair the remote, then re-pair the remote.
    To un-pair it, hold down the Menu button and the Left button at the same time until an icon appears on the screen showing a remote with two cloud-like icons. That means the remote is un-paired.
    To re-pair the remote - or to pair it with the Apple TV for the first time - hold down the Menu button and the Right button at the same time.  It should pair with the Apple TV almost immediately.
    Both options have worked for me, when occasional Apple TV issues happen.

  • SDK J2 EE server remove it from list of programs which start with windows

    Hello there
    Since SDK J2EE 5 server takes many resources, I would like to be able to remove it from the list of programs which start with Windows XP PRO start up.
    How could I possibly do that?
    Thanks in advance

    Since SDK J2EE 5 server takes many resources,is it take more resource ?
    is it decrease your speed ?
    is it not allow another app or software to run ?
    if you say yes,
    then
    type msconfig in start->run
    click startup tab and deselect the corresponding checkbox
    or
    go to control panel -> administrator tools -> services -> select the service , then right click properties and select disable in drop down,
    or
    control panel -> add or remove programs -> select j2ee-xxx remove it

  • OWB 10.1.0.2 Repository Assistant does no start with Windows XP.

    OWB 10.1.0.2 Repository Assistant does no start with Windows XP.
    Does anyone have a clue ?
    Bests
    Eric

    Hi Eric!
    I've got a couple of clues, with the most important being that this is not the right forum. I expect that there will only a few folks in this forum who can answer you warehouse question. Try in the database section if there is a more apropriate forum.
    cu
    Andreas

  • Skype 7.2 doesn't auto-start with Windows

    A week or two ago, Skype stopped auto-starting with Windows.  At the same time, I started appearing as offline to my contacts and cannot message any of my contacts.  I've uninstalled/re-installed Skype but it hasn't fixed my issue.  I suspect this coincided with a Windows Update but I can't be 100% sure of that.  I've searched thru Event Viewer but don't find any Skype errors.  Can anyone offer a suggestion on how I can get Skype working properly again?
    Win 7 with all updates
    Skype 7.2
    Thanks in advance, Andre

    Please, run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Info on all installed devices should be available in this file.
    Be aware that you will have to zip this file before attaching it here.

  • DM 6.0 - Start with windows

    Is there an option to get the DM6.0 software to start with windows in the background?
    I know I can add it to my startup items but then the main window appears when I start windows. I want the software to start in the tray automatically without a window present? Is this possible?
    Thanks.

    Hey cheetah05,
    Currently the only way to have BlackBerry Desktop Software 6.0 to start up windows is to add it to the start-up folder.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • HT5628 How start with windows 8 automatically using bootcamp?

    How i can start with windows 8 using bootcamp?

    When booted under MacOS, you can go to the System Preferences and select your "Startup Disk".  This will allow you to indicate which partition you want your computer to boot from normally, or on just the reboot that you are initiating at that time.  If you have already installed the Boot Camp Utilities under Windows, you can do similar from the tray icon that it loads.  If you boot your Mac from teh Recovery Partition, one of the menu options is to specify the Starup Disk.  You have many options to choose from.

  • Beats audio doesn't start with windows

    Hi,
        beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
    it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

    Hi @MadGrin 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    When I checked the driver page for DV5000  I noticed it came with either XP or Vista.
    Have you checked for any HP  bios updates for your notebook?   If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
    Updating the BIOS
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Have you checked compatability for Windows 8.1.  Windows compatibility Center
    There is a option to scan your computer to check if your apps and device work.
    Have you done all the updates for Windows 8.1?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for