Re: Satellite L500 - Error appears if I start recovery disk creator

Hi all, just tried to launch recovery media creator on the Toshiba board and the following ERROR CODE: 0d00f6-49-00000015 appears.
This goes after a few clicks on the mouse and the program starts.
Any ideas how to mend this?
Operating system is Windows 7 64bit my new shinny laptop.
any help would be great.

Do you use this tool for the first time?
This tool will work with factory settings only and nothing should be changed (preinstalled tools or partitions structure).
I am 100% sure it will work properly if you make recovery installations again. The principle how it works is the same on all new Toshiba notebooks and if this works on my brand new Satellite P500-127 and I don't see any reason why it should not works on your Satellite L500. At first start up I have installed Win7 64bit and later successfully created recovery DVDs.
As I wrote before, if possible install OS again using HDD recovery procedure as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
When installation is finished and you start OS for the first time start "Toshiba Recovery Disc Creator".

Similar Messages

Satellite A300-211 - Can't start recovery disk creator

I just installed the ultraiso program, when I open the toshiba recovery disc creator this message appear
An unexpected error occurred.
please quit this application and restart it.
(error code:0D00F6-26-00000015)
with an only ok option when I press it, it appears again ,when I press ok for the second time, it disappears and the program runs. What can I do to stop that?
note: I had the same problem with the poweriso program
my lap is a A300-211

Hi mate,
Can you please tell us what happens if you uninstall ultraiso program? To be honest ths program isnt known to me, I never heard about this.
Then try it again please.
In worst case you have to start the HDD recovery option to reinstall Windows. Then you should be able to create the recovery media. For HDD recovery procedure I have founded this:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Satellite L500-19X - Can't use the recovery disk

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
I thank anyone in advance.
Happy new year :)

Hi
Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
Bye

Satellite A300 - I can't find the recovery disk creator

Hi everybody!
Need some help with my Satellite A300. I lost the optical recovery disc I burned when the laptop was new. Now when I'm trying to burn a new recovery disc I can't find the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the recovery files left - a folder named HDDRecovery with size 4.5 GB. The problem is to find out how to burn the disc.
Can anyone help?
//iMate, Sweden

Hello
F8 will works just if you didnt change anything with first partition and if you still use factory settings.
"Toshiba Recovery Disc Creator" cannot be gone for no reason. Either you have removed it from the system or you have installed own Vista OS.
I don't want to speculate why you cannot use F8 anymore but fact is that for new Vista installation you need recovery DVD.
You can order one under https://backupmedia.toshiba.eu/landing.aspx

When I try to download an iTunes software update I get an error message that my start up disk does not have enough room. What do I do?

When I try to download an iTunes software update i get an error message that my start up disk does not have enough room. What do I do?

You probably have run out of space, I would delete (or move to an external drive) things that aren't being used as much.

TS1541 I get an error message that my start up disk is full what do I need to do?

I'm getting an error message that my start up disk is full and I need to delete some files how do I do this, and is this my hard drive ?

It sounds so elementary, but don't forget to empty trash. Only then does the space become allocated for new data.
Ciao.

Getting an error that says OS start up disk is full

I'm getting an error that says OS start up disk is full. I've deleted old items but I'm still getting this message. Any ideas?

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Got an error message that said "start up disk full". On reboot, only got a blue screen. Can move mouse around and shutdown but that is it. Firewired it to another mac and cleaned off about 2 gigs of space. Still on reboot only getting blue screen. ???

Got an error message that said "start up disk full". On reboot, only got a blue screen. Can move mouse around and shutdown but that is it. Firewired it to another mac and cleaned off about 2 gigs of space. Still on reboot only getting blue screen. ???

Startup in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US

Satellite A300-1G5: Recovery Disk Creator doesnt work anymore

I have created my recovery disk after buying new Toshiba A300-1G5 model laptop. That recovery disk is damaged now.
I have tried to make 2nd set of recovery disk, but the application is not working.
error message comming "---- orisetenv/setenv.ini file missing.
Please anybody help how to resume the application's (Recovery Disk Creator) functionality?
Another question--- does not Toshiba have a online help facility apart from this forum? Forum is from user, can't we (Toshiba Users) get online help from Toshiba technical team directly?
If yes please send me the route to reach.

I also have a problem with the L500 Toshiba disk creation software.
I initially installed the 32 bit version of Windows 7. I created recovery disks. I then restored the 64 bit version of windows 7 from the partition.
Somehow I managed to break the Toshiba disk creation software: it starts, opens, lets me choose what option I would like, then the screen disappears and it seems like another screen will appear, but it doesnt. It is like a process tries to fire and then just gives up and dies. The same thing occurs when starting the Disk recovery creator.
So I re-restored the 64 bit version of W7 to see if that would fix my Toshiba Disk Creator disappearing after the first screen. And yes, that did fix the problem - until I opened the DVD drive drawer whilst the software tried to access the drive. Stupid, but true. So then I was back to square one.
So now I know how to re-create the error - by opening the DVD drive drawer mid-process, but I am not sure whether I feel like taking 3 hours to restore and re-install all my software to have this happen again.
I tried to uninstall (worked) and re-install (worked) the disk creation software (tc00091600g.exe) which seemed to work successfully, but nothing changed - the same problem persists.
It is as if not everything was uninstalled or there is some kind of corruption of a program or process not ending/starting when it should.
If I knew a re-restore would solve the problem permanantly, I would re-do it, but it seems there is something wrong with the software that cannot detect an open drive and cancel the current operation without corrupting the system.
I can read DVDs and CDs on the drive and will now try to install other software to burn disks, but my gripe is that I can no longer create restore disks.
If anybody has any quick fixes or suggestions, that would be appreciated. I feel like it is only a minor issue and would only take a slight tweak to fix it, but I just dont know what that is.

Satellite P500 - Restart loop after using Toshiba recovery disk

Hi,
I have got a problem recovering SATELLITE P500. I had made the recovery disks. It boots ok from the recovery disk and formats the hard drive and copies the disks to the hard drive. It then starts windows setup and reboots.
Then it goes to a loop
1) Start up and says "Setup is preparing your computer for first use"
2) Toshiba banner saying please wait... Finnishing installation may take several minutes. Pleae do not interupt or shutdown the computer!
3) Windows logo
4) Shutting down...
5) restarts and goes to 1)
It would be great if some one could help me with this.
Many thanks,
Softari

Hello
I have noticed the same on my Satellite P500 but I must say its not an issue, its absolutely normal. The notebook will restart several times (10 times or more) to finish the installation.
You must know that a lot of drivers/tools will be installed and certain restart must be done to configure everything properly.
So dont interrupt the recovery installation, just wait a little bit longer and drink a coffee. Everything happens automatically and your notebook will be reinstalled with factory settings. :)

Recovery disk Creator & data partition won't work - Satellite L300

My niece asked me to re-install her Toshiba Satellite L300 laptop, because the windows installation is rather buggy. She didn't have a recovery disk. Using Toshiba's Recovery Disk Creator I tried creating a recovery disk.
However, the program wouldn't start. Checking the directory of the program, it would seem that the program simply isn't there. Afterwards, I checked the data partition of the laptop.
There was a map with HDD recovery. However when using Windows' advanced boot (F8 before Windows startup) there was no choice of repairing the notebook. They only choices were the standard windows options (Save mode, normal start, etc.).
In short, it seems impossible to re-install the notebook with the current information at hand.
What would be the next course of action? Is it possible to order a recovery CD from Toshiba?
Another niece has the same notebook, would it be possible to use that notebook to create a recovery disk?
I'll appreciate and look forward to your reactions.

Hi
It looks like something has been changed on the HDD
However, fact is youve no Recovery disk and you cannot use HDD recovery option.
This means you need to order a new Recovery disk from Toshiba.
You can do this here:
https://backupmedia.toshiba.eu/landing.aspx
PS: one tip if you would use a search option of this forum, you would find the right answer too ;)

Satellite L500-1ek - setup system always starts with 800x600

I have new Satellite L500-1ek notebook with Windows 7.
Whatever screen resolution I setup system always starts with 800x600. And not only after restart but even when I logout my profile and login again.
More: I use also external monitor. I can have mirror of my laptop screen on the monitor or only display on monitor but whatever I do I cannot have extended screen.
When I try to set it up I'm simply ignored by driver.
So I tried to install newest driver. I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
What to do now?
Marek

Hi Marek,
> I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
As far as I know your notebook is equipped with Intel graphic card and so you are installing the latest display driver from Toshiba website. Is this right?
Well, I have to say that I had the same issue on my Satellite U400 that is also equipped with Intel graphic card. The solution for this problem was pretty easy: I installed the driver via device manager. There select the graphic card, make a right click on it and select Update Driver. In next windows choose the advanced installation where you can choose the driver directory yourself. After the installation make a restart and thats all! :)

Satellite U400 - error - Bluetooth has not started

I have used my u400 for 3 months without problem...
Then suddenly several problems with bluetooth occured...
When I wanted to use BT for example OBEX, I got error msg: "Bluetooth has not started".
I tried to reinstall driver for bt, but I couldn't. I got this error msg: "Please insert BT stack". So I decided to reinstall windows vista with recovery disk. On fresh install of vista, there were no bt drivers pre-installed. So I installed drivers and everything was fine for 2 days..
Now bluetooth is not working again.. can NOT reinstall drivers becouse of error msg again (Please insert BT stack) (Of course, the wifi switch is turned on).. The interesting thing is that in device manager is no BT hardware...
Any ideas?

Hi buddy
Ive got a U400 too and I never had any BT issues
I updated the BIOS to the latest state
Did you do this too?
If not you could try to update the BIOS
Furthermore I recommend enabling the BT using the FN+F8 key combination
Using this buttons you can enable and disable the Bluetooth and WLan
Check it!

Satellite L500-1XD constantly restarting & displaying blue recovery screen

I bought a Toshiba Satellite L500-1XD laptop from an Argos store in August. Soon after I got it it occasionally restarted itself and displayed the blue recovery screen saying the laptop has recovered from a hardware failure. This has become more frequent recently and it often shuts down, displays blue screen, restarts and does this over and over again.
I have not installed many new programmes on the laptop and have installed all updates. I have removed any programmes I did install with the exception of Microsoft Office.
Another thing that might be related if that when the laptop starts up it says the Toshiba Service Station has stopped working and tries to check for a solution to the problem.
I would any appreciate any advice on how I could perhaps remedy this
Thanks in anticipation

Hi katrina_1,
That means the preinstalled Windows version is still installed, right?!
Well, I think its hard to say why it happens It could be a software or hardware malfunction. Both could be possible.
The most reasons for blue screens are drivers or hardware itself Are all devices installed properly in device manager or do you see yellow exclamation marks?
In your case I would try to reinstall Windows. Maybe its only a software or driver issue
Furthermore if you have installed two RAM modules, test it with one module only. You can also use Memtest86 or another RAM diagnostic tool to test the RAM modules for failures.

Satellite L505-10K - Unexpected error when using recovery disk creator

Toshiba Satellite L505-10k
Can't make any recovery disc when I open toshiba recovery media creator, it says: an unexpected error occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then it comes again and then I click ok and it comes again and I click ok and then the program comes and when I create the disc it comes to the verification, but then it says: Unable to read the following file. E: \ Boot \ fonts \ chs_boot.ttf (error code: 02015-20-00000000).
I really do need help, I'm afraid something will happen to my computer, so is there anyone who knows something about this kind of problem?
Thankful for your help.

Hi
I don't now if that works be cause when I got my computer I tried to create an recovery disc but it says yeah, you know, and I was looking in the folder if the file was there as it says that it could not read but the file isn't there so I don't think that it works to do an recovery from the HDD but I know that I can order an recovery disc from toshiba but I don't know if it works to do an recovery with it du you think so? but if I order an recovery disc do you think that I can get it for my language? I'm from sweden.

Re: Satellite L500 - Error appears if I start recovery disk creator

Similar Messages

Maybe you are looking for