Re: Satellite L510 - hotkey doesn't work on Windows 7

Hi,
I have problem with my Satellite L510 + windows 7.
FN+F8 key can't work.
Can anybody help me?
Thanks

Hi
Normally for the FN keys, the Value Added Package and Flash Cards Support Utility must be installed properly.
Check this!!!
Fn+F8 key combination enables or disables the WLAN card. Maybe its not recognized properly and you should reinstall the WLAN driver.
What do you think?

Similar Messages

Media player hotkeys doesn't work with Windows Media Player 11

Hi;
I upgraded my windows media player 10 to 11 version. Now my hotkeys doesn't work. I was wondering if there is a way to solve this problem.

Hi
Do you mean the Toshiba Control buttons which control the WMP function like play, pause, stop, etc
On some Toshiba notebooks the Toshiba control buttons can be configured manually.
Please check this in the control panel -> Toshiba controls.
If you will be not successful I would recommend reinstalling the Toshiba utility again

Satellite P300 - Microphone doesn't work after Windows 7 installation

Hi,
I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
Thanks
James

Hi
Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this it should be possible to use the internal microphone.
By the way: Which application you use for the internal microphone? Skype or something else?

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

Mic Mute Hotkey doesn't work, Sound Mute Button won't change its color [Windows 10]

Hello everyone,
I recently did a clean install of Windows 10 x64 on my HP Probook 450 G1 (E9Y30EA), and after installing drivers I noticed when I turn off the sound, my Mute Button won't change its color to amber (or orange, yellow, whatever), as it did in Windows 8.1 and 7.Also, another thing that's not working at all is Microphone Mute Hotkey (fn + F8). It neither turns off the microphone, nor lights up its LED. I have the latest version of HP Hotkey Support driver installed (7.0.13.1), HP Quick Launch Buttons, HP Wireless Button, installed, .NET Frameworks 2.0 and 3.0 etc.. everything is up-to-date, but it's still not working as it should. Microphone muting just doesn't work at all, and pressing (sound) Mute Button does mute sound, but its light stays white, so I often don't know whether I had the sound on or off with the glance of an eye as I used to. On the other hand, HP Wireless Button works normally, and it changes its color to amber when I press it to turn on Airplane Mode. TL;DR: Microphone Mute Hotkey doesn't work; Sound Mute Button does work, but its LED doesn't work. Is there anything I can do to fix that, or is it just a problem with driver incompatibility that would be fixed in some of the next updates? Or is it something else, like Windows 10 issue or audio driver maybe?
Thanks in advance, pajser92

Hi,
First download the sound driver using the links below and save the installer to your Desktop.
Audio Driver - Windows 7
Audio Driver - Windows Vista
When the download has completed, right click the installer and select 'Run as Administrator' to start the installation - ignore any warnings you may see about this being an earlier version. When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
tt2

"Email me" doesn't work in Windows

Has anyone found that the "Email me" button doesn't work on Windows machines? I have just been told by one or two visitors to my website (www.aroundthebusch.com) who use Windows that the buttons didn't work.

It may be a Flash Security issue... upload SWF to server, open it to browser from there and try your links again...
Here´s one SWF exported from indesign (links to email at page 3):
http://www.edocker.com/_demo/edocker-online-demo/index.html

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix?

HP Deskjet 2512 Director doesn't work on Windows 7? Is there a fix? All that happens is two text pages open, but no Director. I have downloaded and installed latest full software version DJ2510_1313. Any help for this?
This question was solved.
View Solution.

Hi DJ2512,
I understand you have a Deskjet 2512 that is not able to open the Printer Assistant, it opens to text pages. I'm sorry to hear this, but I will definitely do my best to assist you!
From what you've described, it sounds like your Printer Assistant is opening to a Notepad page. I'd suggest that you follow this HP Printer Assistant Opens with a Script Error or in Notepad document to get the issue resolved.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Tap-to-Click doesn't work on Windows 8

Hi all. I'm using bootcamp for two weeks, and Trackpad's tap-to-click feature doesn't work on Windows 8 x64. Can you help me please? Thanks a lot.

Aah, thanks a lot. That's so easy.

HT1589 This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

My apple magic mouse doesn't work in windows 7 after installing maverick os x

My apple magic mouse doesn't work in windows 7 after installing the maverick operating system on my mackbook pro. How do I fix this problem?

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

Re: Satellite L510 - hotkey doesn't work on Windows 7

Similar Messages

Maybe you are looking for