Re: Satellite L650-108 WLan shuts down when lid is close

Hey, so it's all in the title people :)
I got this wireless card ; RTL8191SE. Everything is great, internet is going fast etc ...
But when I close the lid, is shuts down the internet :( which is not great when I wanna download someting pretty big
How do I fix this ?
I got the latest driver, I think : 21/05/2010 ... 2016.2.521.2010
thx

Hmm strange
Did you check the settings in device manager -> Wlan card -> Properties -> Advanced tab?
Here are also some drivers:
Realtek page:
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5&Conn=4&DownTypeID=3&GetDown=false
Toshiba Wlan proptal:
http://aps2.toshiba-tro.de/wlan/

Similar Messages

  • Urgent: Shut down when lid closes problem

    My Mabook pro / mid 2010 / Yosemite 10.10 shuts down when lid closes. This is new in the last few days, not after any system updates. It wont restart after lid opens again, unless repeatedly holding down power button for long periods. Strangely, the sleep light is on before I open the lid, but once lid is open, it's completely off.
    Does anyone know the cause and/or fix for this? I'm really worried it's the beginning of the end, and I rely on this machine for work and need to travel in a few days! Thanks in advance for any trouble shooting tips.

    Just to clarify; when I say "this is new" I mean the problem, not the laptop.

  • Satellite A200 won't shut down when power supply is connected

    The Satellite A200 just shuts down, if the power cable is disconnected before shutting down. Otherwise the notebook shuts down and restarts immediately (max 5 seconds between shut down and restart).
    Does anybody got the same strange problem?

    Hi Thomas
    You should definitely contact the ASP in your country. Maybe its something wrong with the power supply electronic on the notebooks motherboard.
    As John said the replacement should be done for free because the A200 is a new series and the warranty should be valid.
    Good luck

  • MBP shuts down when lid half closed

    Hope for some feedback. Quite a while ago (several months at least) I noticed that when I closed the lid the computer shut off rather than went to sleep. It seemed kind of random at first, and taking it in is a hassle. I did the troubleshooting at the reset the SMC instructions, and nothing else seemed to be going wrong. I mean I had had the mother board replaced 2x, a new screen, hard drive and a new fan,and memory upgrades since purchase. When I did go in the person at the Genius Bar indicated that probably it had to do with the system being out of date and it just wasn't getting the upgrades that later products were able to receive. Now, some of the mentioned repairs were when my Applecare had expired, believe me I asked if it was worth it to repair and I was told it was. I use Adobe CS3 for work and can't afford really to buy the latest as well as a new laptop. So I went home somewhat discouraged but just worked around it - remembered to do a shut down myself, or walked around with the lid open (not advised I know) and with the exception of a few times I just automatically shut the lid, I was coping, though frustrated. Yesterday it shut off with 37% battery left, so I reviewed the SMC instructions and redid. No difference. But I did notice when I took the time to close the lid slowly the shut down initiates when the lid is about 1/3 of the way down. Any ideas out there as to the mechanism? Could something be loose from all the hardware replacements? BTW, this is the very first time I ever found a person working at the Genuis Bar to be so dismissive. Anyone surfing the net this Labor Day week-end? Hoping for help. The machine is the 2.4 GHz Core Duo 17" running Leopard, the Snow Leopard is my sister's
    Annexit

    "Should i try to get this fixed?"
    Yes.
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.8)  

  • Shuts Down When Lid Closed

    Just got the macbook air today .... something annoying is happening.... whenever i close the lid and it goes to sleep - i cannot get it to wake up
    so i hold the power button down and force a restart - sometimes it seems like the computer already shut down and i am just restarting it - annoying.... any one got any ideas?

    Hiya,
    Try just hitting any key to wake up the MBA and see if that'll do the job. I know this was one thing that irked me about the MBA at first--the computer wouldn't wake itself up when I opened the lid, in comparison to the "desktop replacement" HP laptop I have at home. But I've found that hitting any key (I personally prefer to hit the space bar :P) will wake it up instead.

  • MacBook pro shuts down when lid closed

    So, I close the lid on my MacBook pro, go to bed and sleep. When I wake up, the computer shuts itself off for no reason. I've discovered that safe sleep doesn't help. I lose all my unsaved information.

    I forgot to add that when the lid is closed it doesnt shut down straight away. The LED on the front pulses and for a good 10-15 mins it does sleep and wake. However any time longer and it does its hard shut down deal.

  • Laptop shuts down when lid closes

    My 15" powerbook has been acting up the last few days ever since I downloaded the last group of updates. When I close the lid to put it to sleep the entire computer shuts down. When I open it and start it up it gives me the message that the computer was unexpected shut down. Any ideas?

    Sorry, then I have to give up
    Hopefully an other user can provide more assistance to you.
    I would give Apple a phone call and ask for support, since it seems to be affiliated with the replacement battery (at least I would state so to get support).

  • Computer does soft "shut down" when lid is closed

    Hello everyone,
    I have a MacBook Pro I bought in late 2008 that has been having a strange problem for the past six months or so. I take my laptop with me everywhere. About 50% of the time when I open the lid, the computer will have gone into a sort of soft "shut down" while it was asleep. In other words, it used to simply wake up when I opened the lid, but now I have to hit the power button as if the computer had discharged and wait a minute or so for it to wake up. The battery is always at full on these occasions, so not sure why it would do so. Anyone else have a similar problem?

    Hi Sam,
    At a guess the sleep mode setting has changed or it's getting confused about the state, try using SmartSleep and see if that makes the behaviour more consistent.
    http://www.apple.com/downloads/macosx/systemdiskutilities/smartsleep.html

  • 2008 Unibody MacBook Pro shuts down when lid closed while on Battery

    Hello,
    I did some google searches, but could not find anything that was exactly my issue. I have a 2008 MBP unibody. If the MBP is on battery only and I close the lid, the notebook shuts down completely. This is even when the battery is fully charged. However if while plugged in and I do the same, the computer "sleeps" as advertised. I have reset both the SMC and PRAM to no avail. The main thing that bothers me is it seems like when this happens on battery, its almost as if the computer is getting a hard shut down. The machine acts as if the battery was pulled while the lid was closed and this is obviously not good for the hardware or sofware. Any help is greatly appreciated!
    Thanks
    Keith

    I forgot to add that when the lid is closed it doesnt shut down straight away. The LED on the front pulses and for a good 10-15 mins it does sleep and wake. However any time longer and it does its hard shut down deal.

  • Application server shuts down when solaris terminal closes

    I'm running the latest version of solaris and have Glassfish v2 installed. I use the solaris terminal to navigate to the startup scripts and start the appserver... it starts up fine. For whatever reason, when I now close the terminal window, the appserver shuts down. Is this normal? How can I avoid this?
    Thanks

    some of that may be up to the application and how it can be started. im not familiar with this so if you have the doc for it handy, take a look at it looking for running as a daemon or service.

  • Macbook Pro 5,1 issue with shutting down when lid closed  - sleep issue

    Here is the issue I hope someone has seen and figured out the cause. This is on a Macbook Pro 5,1 (2.8 Ghz Unibody). This doesn't appear to be the random shutdown issue.
    My issue is when on AC power and you close the lid the mac sleeps. The light will blink indicating its sleeping. But at random time frames it shuts down. You open the lid and have to power on from a cold boot. Now if you hit sleep from the apple menu then close the lid everything is fine, it will sleep until the lid is opened. So its only when the lid is closed. And its random, sometimes it will stay in sleep mode for a few minutes or hours. But at some random point it will shutdown.
    Any thoughts???
    Thanks
    jim

    Hi and welcome to AD!
    Try a SMC reset.
    DALE

  • Why does my macbook pro shut down when lid lift

    my macbook pro starts and  shuts down, the sleep light blinks, the keyboard lites up, but cannot get os to remain on.  when i click on the powerbutton, the scrren goes black and nothing happens.  have tried most suggestions from apple and others, nothing seems to work.  the macbook pro was purchased june 2011.

    thanks for the reply, i had tried your suggestions prior and no help, i did find out what was causing the trouble, i unhooked my power cord and the display came on, as soon as i reconnect the display went black, i pull the megncord off, and plug it iin after about 5 seconds and it works normal, will have to check my connection or possible faulty cord....

  • My Satellite laptop (A305) shuts down when run on the AC charger/adapter

    The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
    It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
    The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
    One interesting thing is that the _computer runs fine on AC when in safe mode_.
    I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
    It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
    This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
    I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
    Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

  • IMac shuts down when using Safari 2.0.4

    My iMac shuts down when I visit certain websites such as Pogo or video sites. Took it to the Apple store and of course the problem wouldn't replicate there. They kept it to check out the scripts and logs to see if they could find a problem - without success; although they did suggest my house is haunted. Brought it home and it quit again.
    We thought perhaps we were getting interference from other wireless devices and unplugged our cordless phone which worked for a day. The computer always turns back on so its more of an annoyance than a real problem, but I'm baffled.
    It also happened once when I was downloading from the iTunes store, but is most prevalent with Safari.
    We have wireless internet connected via ethernet to an Airport Express.
    Any ideas? Thanks.
    iMac G5 Mac OS X (10.4.10)

    Hi Barry -
    Yes I do live near a ghost town (kinda) - Virginia City, NV. And I did tell any unwanted visitors to leave.
    Actually, in the last year, they have replaced the Super drive, power supply, inverter and logic board. The only reason I'm not thinking power issues is that it only happens when I'm in Safari or iTunes. I would use Firefox except I've got java issues with that. I can (and do) use the machine for other things all day long without problems. I can use Safari all day long as long as I'm not playing on Pogo or certain video sites. Maybe Pogo is haunted?
    It also doesn't happen on my husband's iMac on the other side of the house. Is there something that could cause enough interference to actually make the machine shut down? Oh, the antennae for the satellite TV and internet are on the roof directly above me, if that would have anything to do with it.
    Thanks for your help.

  • Computer shuts down when burning

    Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
    Toshiba Satellite    

    air traffic controller
    What computer operating system is your Premiere Elements 10 running on?
    If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
    Please review the Adobe document dealing with troubleshooting burn to disc issues
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
    After that, we can decide what next if necessary.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

Maybe you are looking for

  • Maximum size for div

    I have a div tag that is set to 300px height and 'overflow: auto' to start the scroll when the content gets larger. It would be nice to have that size flexible, so it fits snug around smaller content and switches to scroll bars when it exceeds 300 pi

  • Problem with icons apple store

    Hello everyone; I have a small problem that does not sway me at all, but wanted to know why this problem. Some days ago I had the problem of Invalid Address on my account, which simply hit the Continue button and got my menu icons this way. Would lik

  • Zen Micro Is fro

    Hi I hope someone out there can help me. My MP3 is frozen at the recovery screen and everytime I try to update the firmware it stops halfway thru any suggestions. This is driving me crazy.Kim

  • Custom Process in Start process optoons

    All, We are working on HCM forms and prcesses. For MSS when the manager clicks on start process, chooses an employee and then for selecting a process , a pop up with available options of process comes. Howe can we add a  custome entry into this popup

  • Central Syslog on Linux

    - starting the collector without the option -v2 then when a instance start, the syslog shows Error 000104 : Connection reset by peer in Module rslgsend(027) - starting the collector with -v2  all works well i down loaded  the latest rslgsend and rslg