Re: Satellite M - Screen stays black

Hi,
I am not the most computer savy person, but i do know that when i open the lid on my laptop, the screen is supposed to come on. Sometimes the screen stays blank, but I can here it make the sign in sound and if I plug it into the TV via the HDMI port it shows the screen is working fine.
What have to do then is shut it down, open and close the top a few times and hope it works again. This can even happen if it is open and working and i restart the computer.
Any ideas?

hi again,
thanks Keany, I tried what you said but it didn't help unfortunatley. And C3PO, I am sorry i forgot to give any computer specs, so here they are.....
Its a satellite M300 (model no PSMDCA-03600R) running windows 7 ,32 bit operating system, 2.0 Gig of RAM, intel 2 core duo processor. It is about 15 months old, and this problem has been occuring for atleast the last two months, just out of warranty (D'oh!).
Any advice would be gladly rceived!!
Thanks for your replies so far.......
ps. I am running no external devices at all, and i have not installed anyt extra hardware on the computer since i bought it. I am not sure What card C3PO is talking about, again I am a bit computer illiterate.....
Message was edited by: Lags

Similar Messages

  • Satellite A200 screen stays black when trying to boot

    Hello everyone,
    My Toshiba Satellite A200 notebook is not working anymore, so everything started when I was playing a game, suddenly, the screen turned blue with some tiny text written on it. I had to hold the power button a few seconds to close it because nothing was happening on the computer. I then pressed the power button to open it. Everthing was going well, until the welcome screen. At this part, it was written "Welcome" but the Vista loading circle left of it wasn't turning.
    After a few seconds, I decided to close the computer again, so I did hold the power button so the computer closed. Here is the problem : I tried to reopen it, but the screen stayed black. Nothing was happening. The power light was blue, but not any computer activity. So I let it like that a few minutes then closed it and tried again, but the same thing happened. I tried to disassemble it and noticed one of the two memory card wasn't fully in its slot. I fixed it, but it didn't fix the problem.
    I also tried to plug another screen on it, but that one was also black. So I put back the screen on its computer and tried to boot my laptop and it worked. It was booting, but the first problem came back, the Welcome screen was frooze there. So yes I did close it again and then the same thing happened, the screen stayed black.
    I don't think the problem is the screen because as I said sometime it goes to the welcome screen. Also I don't hear any welcome sound when the screen stays black as if the computer would simply not start up. And as I said earlier, I don't see any computer activity on the little light in front of the computer. And left of this one, I clearly see that the computer is ON because the power light is blue.
    So this is my problem, next time the computer manages to start up I'll try to boot it on the SAFE MODE, but until then, I don't know what to do. Please, help me.
    Thanks in advance,
    MrRoy
    EDIT :
    After letting the computer turned off for about 30 minutes, I started it, and booted in safe mode. At this step, I securely closed my comptuer with the shut down button instead on holding the power button. Then I reopened my computer, and it booted and the problem was fixed. Now my notebook is openened and working.
    So if this is happening to you :
    1. Shut down you computer.
    2. Wait for about 30 minutes.
    3. Boot in safe mode
    4. Shut it down using the shut down button istead off holding the power button.
    That should work.

    Finally, it doesn't work. I don't know why but my computer did start up after the 30 minutes, but now it's not working anymore. It just won't startup like I said later, with a black screen.
    The computer did work for about half an hour. I mean, I managed to start it up but after executing a program, it just froze and I had to hold the power button to restart it. I did it about 3 or 4 times, then it simply did the black screen again. I think the problem is my processor, maybe it's damaged or something, could it be possible?
    Because I see that the processor isn't working when I try to start it up.
    So let's say it's damaged, would that be the symptoms of my computer?
    And if it's the processor, the only way to fix it is to send it to a reparator or something, because I don't feel like it, I'd rather do it myself.
    But right now, my computer is simply not booting, like I said in my previous post.
    Thanks in advance,
    MrRoy
    Note : The edit button wasn't there so I had to double post :/

  • Screen stays black on start up

    This is my second Toshiba laptop to do this to me. I just got this one in 2013. The last one was a no go on fixing it cuz it was cheaper to replace it. Tonight i come home and the same issue. The screen stays black. I can hear it running but have no lights except the white one in front showing its plugged in. Any help will be appreciated. Getting disappointed in this brand.

    Satellite L875D-S7332
    PSKFQU-008003
    Ive done the take off battery. Holding power button, testng power cord, pluggin in cord w no battery, f12 while powering off. I just hate to have to go buy another laptop. Thanks for responding to me.

  • How do i fix my iod touch... screen stays black

    how do i fix my iod touch..... the screen stays black with the apple logo then cuts off again after like 5 minutes..... someone please help me ?

    Please tell me it's not jailbroken.  If it is, all bets are off.  It is not...
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • 1st generation iPod touch-screen stays black

    I have a 1st generation iPod touch, but it's impossible to turn it on. I've tried pushing the home- and lock screen-button at the same time, and I've tried charging it, but the screen stays black. What else can I do?

    Try here.
    iOS: Not responding or does not turn on
    You may have a dead battery or other hardware problem.

  • IBook screen stays black at reboot no matter what keys I hold down

    Hi, I posted a very similar issue a while back and was able to resolve it with some people's help:
    http://discussions.apple.com/message.jspa?messageID=13196227#13196227
    This time, I had to force shutdown cause the finder wasn't responding when I was transferring a movie to AppleTV. But now when I try to reboot, the screen stays black no matter what. I've tried booting while holding C, holding the mouse button and alt, but nothing brings me to the boot screen like last time. Similarly, I was low on Gigs, but I had a couple left and was in the process of making room. Would really appreciate any hep. I feel like a moron .

    Were you getting warning messages that the hard drive is almost full? You may have corrupted the files on the HD.
    Will it boot in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" some problems.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://docs.info.apple.com/article.html?artnum=106214
     Cheers, Tom

  • IMac starts with fan, screen stays black

    When attempting to start my iMac G5 (Ambient Light Sensor), fans come on but screen stays black. A couple minutes later, the fans rev up and run very quickly and loudly. This started happening when:
    1. One day the screen showed a green question mark with a message indicating that the computer needed to be restarted in a box
    2. Green lines were all across the screen
    3. I forced it to shut down by holding down the power button
    4. When I attempted to start it back up the fans started but the screen stayed black
    5. After a couple of minutes, the fans revved up
    This has been happening ever since. One time the computer started to the desktop but everything was frozen. I have reset the PMU, checked the diagnostic LEDs, reset the PRAM-basically everything suggested. Can anyone help? Thanks!

    Try the suggestions mentioned in the following Articles:
    http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display
    http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
    Strongly recommend that you update to OS 10.4.11. Your system info confirms you are still using the basic Tiger OS.

  • Start-up problem with my Macbook - light stays on and screen stays black?!

    Hi, sometimes when I start up my Macbook the switch-on light stays on and the screen stays black. Then I have to turn it off and when I restart it boots normally. What can this be? I resetted already the PRAM and the firmware is up to date. Perhaps someone understands german. Therefore I added my german post... Many thanks in advance!
    Hi, hab ein seltsames Phänomen. Manchmal, vor allem nach ausgeschaltetem Zustand über Nacht, leuchtet nach dem Einschalten das Einschaltlicht auf und geht nicht wieder aus, wie normal wenn das Macbook startet, sondern bleibt an und der Bildschirm bleibt schwarz. Dann schalte ich das Macbook mit dem Ausschaltknof aus und warte ein paar Sekunden und schalte es dann wieder ein. Daraufhin startet es ganz normal. Woran könnte das liegen? Hab schonmal PRAM resettet und die Rechte auch repariert. Der Hardwaretest zeigt auch keine Probleme an. Kann man(n) noch irgendwie überprüfen, woran das liegen könnte oder hat das Problem auch schonmal jemand gehabt? Mein Macbook ist gradmal 2 Monate alt und hat das Problem erst seit kurzem. Könnte das vielleicht auch an einer Software liegen, die ich installiert habe. Kann sowas auch Auswirkungen auf den Bootvorgang haben? Bin Laie und würde gern wissen, ob sowas auch an der Pufferbatterie oder einer kalten Lötstelle liegen kann oder könnte das Macbook da dann gar nicht starten. Wäre für jeden Vorschlag dankbar... Vielen Dank schonmal im voraus!

    Hi,
    put me on the list as well. I was already in contact with ADC and it seems to me that they acknowledged it as a bug. I'm using a Mini-DVI-to-VGA adapter. And sporadically when unplugging it the internal display stays black or switches to the blue background and hangs there.
    As I heard from friends who are using the Mini-DVI-to-DVI adapter in the same use case, this doesn't happen to them.
    MB (CD 2 GHz), PB G4 15" (1.67 GHz), Mac Mini (1.66 GHz Core Duo)   Mac OS X (10.4.8)   iPod color 60 GB, iPod 1G nano 4 GB, iPod 1G shuffle 1 GB

  • Second screen stays black Mac Pro

    second screen stays black Mac Pro with 2 x 30" apple cinema HD displays, connected via thunderbolt / USB adapter

    I ma confused. You say yo have Lion and are using "via thunderbolt / USB adapter"
    Only the 2103 Mac Pro has Thunderbolt and it shipped with Mavericks
    What model Mac Pro?
    What video card(s)?
    Does the one screen work if the the working one is disconnected?

  • IMac's screen stays black

    Went to wake up my iMac, heard the computer running but screen stayed black. I've tried restarting and unplugging and re-starting with no change. Any other suggestions?

    If you don't know what a RAM disk is then you're almost certainly not using it. This was a feature in OS 9 to use RAM as very quick disk storage space. It was not enabled by default. Unless you've created a RAM disk (on Apple Menu > Control Panel > Memory) and saved files to it, you're safe). 
    Take care only to reset the PMU once.
    You should probably start a new thread so you get more attention to your issue.
    regards
    mrtotes

  • My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

    My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

    Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
    ..Step by Step to fix your Mac

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • HT4528 While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me.  How do I get it back to normal?

    While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me.  How do I get it back to normal?

    "If VoiceOver is on and the screen is black, but you can still use the device by pressing volume up and volume down, you may have screen curtain on. Try triple-tapping using three fingers on the device display to turn off screen curtain. Or connect the device to iTunes"
    http://support.apple.com/kb/HT3577?viewlocale=en_US&locale=en_US

  • I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black. MAY YOU HELP ME PLEASE???

    I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
    WHAT TO DO

    carter87 wrote:
    so i bought this Iphone 4 thats jail broken,
    Return it.
    Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
    Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    ... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.

  • The screen to my iPhone 4 went completely black. Ive tried turning it on and off, plugging it in, restoring it from my iTunes but the screen stays black. It connects to iTunes and when i plug it in, it vibrates like I have a text.

    Why does the screen turn black? I was using it normally and it all of a sudden faded to black and hasnt come back on since yesterday. You can see the back light but no image on the screen. Ive plugged it in and it vibrates that its connected but still the screen stays black. I left it alone while I slept and tried again in the morning but still nothing.

    So weird mine is doing the same thing. I didnt drop it or anything. I was texting and it suddenly went white and then turned black. It says its plugged into itunes but the screen comntinues to stay black.

Maybe you are looking for