Re: Satellite M100-221: screen goes black moving the display

Hi,
I have a problem with the lcd display on toshiba satellite M100-221.
When I move the display the screen goes black.
The display works properly only when the angle is close to 90 degrees.

Hi buddy,
Im not a technician but I agree with the user above. For me it sounds like a hardware problem and you should go to an authorized service provider. The technicians can check your notebook and exchange faulty notebook parts.
You can search on the Toshiba website for nearest ASP. ;)

Similar Messages

I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad?

Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad or graphic card issue? Trying to decide if computer is worth repairing as it was made in 2007.

It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.

HT3964 my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually s

my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually started and I have the dashboard appear but then the screen freezes

Since you have Lion v10.7.4 installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input.

When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers. Sometimes it works, but most times not...very frustrating. Any recommendations?

When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers. Sometimes it works, but most times not...very frustrating. Any recommendations?

Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

Re: Satellite Pro A200 - Screen goes black after BIOS screen

Hi,
I'm new to the forum and have quite a big problem. So any help is welcome and appreciated.
My Satellite Pro A200 goes black after the BIOS screen and a black screen with a blinking cursor. Also just before the screen goes black a bleep can be heard which shows windows is booting.
I can access the toshiba set-up screen but not the safety mode set-up.
Kind Regards

Hello
You wrote that you can access the BIOS but have you checked if the HDD is recognized properly? Maybe the computer cannot boot because HDD isnt recognized so you should check this.
If the HDD is recognized I would try a recovery installation from Toshiba recovery disk. It seems that Windows isnt able to start and if you reinstall the whole system it should help to get rid of this. Just go in boot menu and select CD/DVD drive as boot device.
Check this!!!

My screen goes black all the time!

Ever since I installed Leopard, my screen will go black if I don't type anything for just a few minutes. (I can barely see what's on the screen ... BARELY)
My laptop is plugged in and receiving power so that's the reason.
I have checked my power settings at that is not the issue.
I have checked the timing on my screen saver and that is not the issue. (my screen saver doesn't start when this occurs)
Does any have any suggestions?

Sorry you're having this problem.
A few years ago we had a similar issue on one of our machines, it was an early MacBook. Ended up being a cracked circuit connection on the motherboard. Changes in temperature caused the crack to expand and contract resulting in a shut-down followed by an automatic reboot. Sometimes over-and-over. I understood from AppleCare at the time that those symptoms could have also been any number of things including a intermittent issue with a powersupply.
If you take it back to the Apple Store at some point, I would ask them to have it run some CPU intensive tasks that closely resemble what you are doing when the screen goes black. It took us several try's to find the problem. Calling AppleCare each time to discuss it and troubleshoot before making the trips to the Apple Store really moved things along. In fact, it wasn't until the Apple Store had cracked the case from the inside that things kicked into a higher gear and AppleCare phone support sent out a pre-paid FedX package to send it to a refurbishing facility. Never a problem since and I know the people who have the machine today.
PS Can identify with the trip to the Apple Store, our closest one is in Knoxville, 2hrs from us.

My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

My mbp freezes when i lift the lid up, the screen goes black with the mouse on it,

my macbook pro freezes when i lift the lid up, the screen goes black for about a minute before coming up for me to log on
why is this happening

Hello,
Please see What userid & password do I need to install Flash Player?.
Maria

Satellite A135-S2326 - Screen goes black

I have a A135-S2326, one day it started to go black screen when i was on it.. i would close the lid and reopen and it would be back on .. after about 20 seconds though it goes black again.
I thought it was done with, then I tilted the screen back and I noticed the computer was still on, you can see the desktop icons and can still operate the laptop itself just for some reason the screen lighting is out. Would this be a driver update, reinstallation, or is the screen just shot no good anymore? When i plug an extrernal monitor to it im all good.
I was going to try and do a system recovery but last year i brought my laptop in cause usb wasnt working, they inturn screwed my motherboard up trying to repair them. So they replaced my motherboard with what they said was the same specs as old, a few months later went to do a recovery and the disk when i put in would pop up on screen system does not recognize. Called the toshiba repair place they said something about reseting something to make the disk work,, which i have no clue what that ment.

Hi!
> When i plug an extrernal monitor to it im all good.
Looks like a LCD or FL inverter issue.
I think a recovery installation will not solve the problem because the external monitor works without problems.
In your case I would go to a local ASP and ask a technician. They can check your notebook.
On the Toshiba website you can search for an ASP: http://www.csd.toshiba.com
Bye

My laptop screen goes black after the vaio logo displays

Hi mandy_s_2001,
Welcome to Sony Community!
What is the exact model name and the current operating system of your unit so we can check the specifications and provide accurate solutions.
I got few questions for you, When was the last time that it was working? Was ther eany change before this happened? Any troubleshooting that you've tried?
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Hi,
Is your notebook under warranty?
Try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD.
http://www.ubuntu.com/desktop/get-ubuntu/download
If this does run ( it will be slow ), it probably means your Hard Drive has failed and will need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Portege M400 freezes, screen goes black and fan speed increase when moved

Can someone please help me?
I recently received the Portege M400 from a friend 4 days ago and reformatted to Windows XP Tablet edition.
All was going well until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically!,
So far I have had no success in fixing this problem and I much appreciated is some one could help me!

Hi there,
I have the same laptop. Bought it from a friend also! That was a year ago. It was working perfectly till 6 months ago when I had it going 100% like yours. Screen freezes, fan speeds up and hangs up once it is moved. Recently, even if it doesnt move it hangs up also. I have tried many things like reinstalling drivers and Windows.....etc.
I dont think it is Windows problem or drivers problem, because if you run BIOS and try to move the laptop, it also hangs up!!
Tried updating the BIOS, also no benefit. I ended up opening the laptop and having a look to the motherboard (thinking that I could see something that I could fix!! But again, did not get any results.
I tried also disconnecting peripherals one by one to see whether I could spot the problem, I disconnected the battery, the hard disk, the optical drive, the wirelss modem (from inside), memory, and even the bluetooth, but could not spot the culprit.
I believe now that the problem is basically the motherboard (sort of wear and tear insulation problem) and it is beyond my humble expertise.
I am sure if I would contact TOSHIBA, they would not be of much benefit as I am a second hand user. And if I try to buy from them a main board, they will charge me hell of money.
I hope that this is helpful for you to avoid you wasting your time like me.
Please if you would come into any progress, let me know. Likewise, I would be happy to update you.

Re: Satellite M100-221: screen goes black moving the display

Similar Messages

Maybe you are looking for