Re: Satellite P - Windows Media Center issue

Without any visible virus problems or bug threats Windows Media Center starts to crack out in video release.
Simply random loosing pixels on a screen, and all other similar programs such as wmp, vlc media player, mv2 and Intervideo Win DVD working correctly?

I don't know what notebook model do you have exactly and what is wrong there but if you want to have well working Media Centre install OS using delivered recovery media.
After doing this it will work properly.
Maybe you have installed some codecs or some third part application that can have negative influence on WMC functionality. To be honest your posting doesnt offer some relevant info to this issue and it is not possible to say for sure what is wrong there.

Similar Messages

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Apple 23" Cinema Display not supported by Windows Media Center Edition PC

Well I'm learning the hard way and of course that is through experience. I just found out after purchasing my 23"Apple Display and talking to the Apple Support Tech is that Apple does not support the Cinema Display with PC's,
Wish Apple would be more transparent on this issue prior to a costly purchase. For example on the Apple site listing the Display in system requirements:
Windows PC and graphics card that supports DVI ports with full single-link digital bandwidth and VESA DDC standard for plug and play setup
Well I have a Windows PC with a Nvidia Graphics card just as the system requirements state. Yet my PC will not adjust to proper resolution for the Apple Display. The graphics card works fine. Its a driver issue where the Apple Display is not compatible with Window Media Center Edition on Windows PC's
So in conclusion the system requirements for Windows PC's that Apple is stating For Apple Cinema Displays is not correct. The system requirements need also to state that the Apple Cinema Display does not work with Windows Media Center Edition (MCE)
Hope that helps for any users with Windows Media Center Edition thinking or already have purchased an Apple Cinema Display.
73,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Well,
Here is the latest from Nvidia Customer Care educating users on the DVI port on the Nvidia GeForce FX 5200:
"...The basic difference you will see in these ports are in their Physical appearance. The DVI-D has less pins compared to the DVI-I port connector. Also the Apple 23" Cinema Display will work at a resolution of 1920*1200. But this graphics card that is Geforce FX 5200 will not support this resolution of 1920*1200. It will support only till 1600*1200. So that's the reason you were having the issues were you were not able to adjust the resolution"
So I ask, which Nvidia GPU card can I substitute for the current one at a reasonable price? I don't need dual link, so single link would be sufficient for my application . Here is some more helpful tips from Nvidia support. Hope this helps other users, utilizing the Apple 23" Cinema Display"
"...go for a Geforce 7600 GS graphics card which is a AGP 8x compatible graphics card. This graphics card is just 129$ graphics card. Please visit the given link to know about the details of this graphics card."
http://bfgtech.com/7600GS_512.html
And now for the final conclusion of what you need to know regarding DVI ports. Evidently Nvidia uses a term called normal DVI port. I've never heard of that term in the literature in shopping for a graphics card and checking the specs. I guess you need to look for the specific term single or dual link specifically. If it doesn't say that, then what I can gather it is a normal DVI port...whatever the heck that is?
"...Yes let me inform you that the Geforce FX 5200 graphics card does have one DVI port and one VGA port. But these single link and Dual link DVI port is totally different compared to the normal DVI ports. As you wanted to connect an Apple 23" Cinema Display to this graphics card. So for this you will need to have a graphics card which will have a Single link or Dual link DVI ports not the normal ports. So to support an Apple 23" Cinema Display, you will need to have either a Geforce 6 series or the Geforce 7 series graphics card. That's the reason I gave you the list of graphics card which comes with Single or Dual link DVI ports, not the normal ports."
Oh well off to the market to pick up either a Series 6 or Series 7 Nvidia Graphics card. The Nvidia Customer Care team was very helpful and replied to my inquires very quickly through email.
Hope this long drawn out expose helps others who might have issue with connecting their proud Apple 23' Cinema Display to their PC
Kind Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio PC, G-Drive External HD,Toshiba Satellite Pro Notebook

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

How can I use the FM tuner in Windows Media Center?

Hi everyone.
New to the threads.
Found this site while looking for answers to a problem I'm having. ?:|
I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
I also have been playing around with Windows Media Center.
However, I cannot figure out how to operate the FM tuner inside WMC....?
I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
Thank you! :)

Hello
I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
Bye and good luck!

A700 blue screen of death when performing Live TV Search in Windows Media Center

I just got my new Lenovo IdeaCenter A700 today and have been busy setting it up. I was trying to set up the TV on it, and used Windows Media Center. I plugged the tv cable in to the back of the computer and selected "live tv setup". I then put in my zipcode and it was downloading some things and then came up with a blue screen. When the computer restarted the information below was the MS error message. I have attached the files mentioned in the log. This happened to me twice.
Hope you can help.
Please let me know if you need anymore information.
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   4a
BCP1:   0000000076E5FF2A
BCP2:   0000000000000002
BCP3:   0000000000000000
BCP4:   FFFFF8800AADECA0
OS Version:   6_1_7600
Service Pack:   0_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\102110-15849-01.dmp
C:\Users\fennis\AppData\Local\Temp\WER-36941-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

Update Windows and all drivers, download newest video driver from AMD website, you have some software issue.

Actiontech router and Windows Media Center on Win8

While waiting for Verizon to solve their network problems and actually get light to the ONT, they left the actiontech router in my house, so I took sometime to get to know it.
It's definitelly something I don't want or need in my network. It's not a bad router if you didn't have a business class product from before (actually it is pretty much the best you can get short of going to hardware firewall routers in the class of Zyxel, Watchguard and some high end, business class, Dells, Ciscos and Netgears).
Well... needless to say, I am running such a router (a Watchguard XTM-26W) and have security subscriptions with them to protect my network. In addition, it offers functionality and discrete access controls otherwise impossible with consumer grade products.
Now, back to the basic subject: I noticed something ominous and wonder if anyone else has noticed it too. I run my TV service through a machine that uses a Ceton 4-HD PCI-E tuner card with a multistream cablecard. It is installed on top of Windows 8 Pro, 64 bit and I use Windows Media Center as my core TV interface (guide and all). The machine is set to go to sleep by itself if no activity (and TV it's the only thing designed and intended to do and the only thong it does) is detected on the tuner for 5 minutes. This works flawlesly and always did while on Comcast service.
Now, the problem: you put the Actiontech router in the network (regardless of whether it's before or after the firewall gateway) and the machine fails to go to sleep. The router introduces some dort of chatter in the networkk that keeps the HDD active and the computer alive in perpetuity. Did anyone notice anything similar? What is your experience with this?
Obviously, I have no intent to keep the Actiontech router in the network under such conditions. For what I know, it is illegal in fact to put out products that send unsolicited traffic through one's network. Not to mention that it is a security risk. Might Verizon re-consider their insistence on deciding what routers to support and what don't or simply drop all support for all the routers since none is ever really needed? They only have the job to deliver a public IP to my equipment and I should be left alone otherwise (according to FCC). Which they otherwise fail to do by putting a piece of equipment that is theirs in the way and mandating that I use it, since 192.168.x.x is NOT a public IP, according to Internet Council.

LeoZ wrote:
Actiontec responded to my inquiry. See below.
It turns out it's another Verizon problem...
"Honestly no idea what would cause the chatter on the network to prevent sleep\stand-by to function.
Verizon would have to review the issue and see what in the code programming would cause this."
Stop the chatter. Put your Media Center hardware behind another firewall. Like I said mine is Linux IP-COP, which constanty drops these trash packets from the single STB I have on the MOCA COAX.
All from the Verizon network router. Almost like a broadcast storm!
This is a Motorola STB, My Cisco had two real IP addresses asigned by DHCP, and they did not do this. I turned in all my STB hardware and ordered a single STB, and was sent Motorola when I had been using Cisco.
wan-1 in into my Linux box and lan-1 is out of it. Then all my harware which includes Media Center PCs are gigabit switches, not exposed to this. I guess you could use another router and not a Linux PC. This STB is going back soon.
Time
Chain
Iface
Proto
Source
Src Port
MAC Address
Destination
Dst Port
22:53:42
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:22
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:53:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:17
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:51:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Windows Media Center - wont launch...due to Software Restriction Policy???

Current system:
Windows Vista x64 Ultimate RETAIL installed onto clean system.
UAC disabled
Using full administrator account w/ no restrictions
Problem:
Anytime I attempt to launch Windows Media Center or Media Center Extender I receive the following popup error and the program does not attempt to to even start:
Error:
[Windows Media Center
"Windows cannot open this program because it has been prevented by a software restriction policy. For more information contact your system administrator."
Summary:
When I initialy installed the OS, this problem did not exist. I was able to launch WMC just fine. Only after a couple month of reinstalling necessary base applications do I now get this error. My family cannot even use it as an extender for the XBOX360 anymore.
From what i can tell there are a lot of people with this issue and NO SOLUTION from MS as yet. I did see in one post that someone else had this error and was able to correct it by setting WMC as the default application in "Default Programs --> Set Program Access and Computer Defaults" This did not work for me at all. At this point I am at a complete loss. Any insight would be appreciated.
-J

For Windows 8 here was the solution that FIXED it for us:
http://windows.microsoft.com/en-us/windows-8/set-program-access-computer-defaults
To start, open the Set Program access and computer defaults page:
Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then clickSearch.)
Enter control panel in the search box, and then tap or click Control
Panel.
Under View by:, select Large
Icons, and then tap or click Default Programs.
Tap or click Set program access and computer defaults.
Set program access
If you want to make a program inaccessible without uninstalling it, you can set it so it doesn't appear where programs are typically listed.
On the Set Program access and computer defaults page, under Choose
a configuration, tap or click Custom.
Clear the Enable access to this program check box next to the programs you want to make inaccessible,
and then tap or click OK.
Shawn Lafferty

Windows Media Center

I have a Pavilion p6724y PC with Windows 7 Home Premium 64Bit Service Pack 1 and I'm trying to view tv on my pc. The product code is QP720AA#ABA. When I go to the tv options internet tv is not listed. What do I need to watch tv on my pc????

Hi btunis,
I looked up the specs for your computer model and I don't see a TV tuner listed. Do you have one installed? Typically you'd need to hook up your computer TV tuner to either an antenna, cable or satellite/set top box in order to watch TV with Windows Media Center.
If you don't have a tuner and don't want to purchase one, you might still be able to watch some on-demand programming (not live TV) through Windows Media Center, depending on the region where you live. Check out this article from How-To Geek for information about setting up that functionality: Watch TV Programming Without a TV Tuner in Windows 7 Media Center. According to Microsoft this function is not available in all regions, probably due to licensing considerations.
You mentioned you're not seeing the Internet TV option -- if you live in the US it should be available for you, so make sure you have installed the latest updates for Windows Media Center.
I hope this helps!
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Q190 Windows Media Center Missing

Hello I just recived my new q190 and it is missing Windows media Center which a sales person on chat told me was included and the photo on the product page shows the device running. I am unable to locate this application or a activation code for it in the packaging
Also the device came with windows 8 when the "tech specs" page stated it came with windows 7 pro 64, which would have included windows media center.
This HTPC is useless with out WMC.

hi EvanB,
If your model is included in this pdf data sheet then you most likely have a Windows 8 standard machine. In order to get the Windows Media Center, you will need to upgrade to Windows 8 Pro with Media Center. Using a Windows 8 Pro Pack allows you to achieve this. If you specifically ordered a Ideacentre Q190 with WMC via shop.lenovo.com, have you tried giving them your order number to see if the Windows 8 Pro Pack is included in the purchase?
Alternatively, check XBMC as other users find it as a good alternative to WMC,
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

'Windows Media Center Receiver Service' stops and cannot be restarted

Hi,
I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
"0x80070003: File path not found"
I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
I tried the following tasks to remedy the issue and none of them were successful:
Run SFC from cmd prompt - no issues were found
Changed the 'logon' details for the service from Network to Local
Changed the start type of the service from manual to automatic
Restored previous versions of windows - prior to windows updates
Re-install TV Tuner drivers and software
Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
Re-seat the TV tuner in a new PCI slot
The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
the TV channels in WMC that it then has issues.
I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
Any help would be much appreciated!
Thanks

I shall suggest you :
1. uninstall WinTV software and reinstall WMC from the scratch.
2. Disable AV or any other internet security application during configuring WMC.
3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
Run Setup Again.
Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
Does it help?
If the above doesn't help then try resetting WMC:-
Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
Now reconfigure WMC again
S.Sengupta, Windows Entertainment and Connected Home MVP

Accessing Mac media in Windows Media Center 7

Hey all. Just started to delve into Windows 7 on my MacBook Pro and am very eager to try out Windows Media Center, especially for the potential usage I could benefit from by linking it with my XBox 360. Anyways, I'm trying to make the source of media be my iTunes folder on my Mac Partition and I can find it, select it and do not understand why Media Center cannot access it. I've tried opening the mp3 files in Windows explorer and opening them in Windows Media Player and they work fine, but Media Center is having issues opening them. Any ideas on how to fix this and make it work? THank you.

Hi Casey,
I don't use Media Center but it might be that by default a BootCamp Windows has only read-access to the OSX partition and cannot write to it.
It might be that Media Center is trying to write 'something' to the mp3 files and because of failing to do so does not open them.
MacDrive http://www.mediafour.com/products/macdrive/ gives Windows complete read and write access to the OSX partition.
Regards
Stefan

Windows Media Center Has Stopped Working...

Since I first bought my Toshiba Satellite P305-S89151, I've received "Media Center has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" responses. When I click on the Close Program dialogue box, I'm provided with an MS KB (KB 947464) article pop-up that is suppose to help me resolve the problem. IT DOESN'T!!! When I click-thru on the KB link, the MS Support site says they can't find their own KB page! Does anyone know how to repair this Media Center problem on Vista Home Premium (64bit)?
Thank you!
[email protected]

Satellite P305-S89151
Media Center has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
I wonder if this one applies.
Error message when you repeatedly use a shortcut within a brief time frame to start the Picture Libr...
-Jerry

Mac + Windows Media Center

I currently have both a pc and a new Macbook. On my pc i use Windows Media Center to record tv shows that i've missed. I'm able to network the two computers to view and share files however i can't play the recorded shows on my Mac. I see them in the shared file but its not opening it. It says "Error opening movie". Can anyone please help me? I'd really like to watch my recorded shows from my Mac laptop and not have to be stuck behind my pc. Please Help???
Thanks

You need to export the Media Centre recordings into a format which will be viewable on the Mac.
Taken from the Media Portal Forums
Here is a quick guide to strip off the ASF wrapper MS use for their DVR-MS file format. This is used in MediaPortal for recording with MPEG-2 capture cards like the Hauppauge PVR-250 / 350 models.
What you need to have...
1. Graphedit http://www.digital-digest.com/dvd/downloads/graphedit.html
2. Cyberlink DirectShow filters MPGMUX.AX & CLDUMP.AX (You'll have to find these)
What you need to do...
1. If not done already register the two filters listed above from the directory where they have been installed.
regsvr32.exe MPGMUX.AX
regsvr32.exe CLDUMP.AX
2. Start Graphedit and the click 'File' then 'Render Media File'
3. Choose the *.DVR-MS file you wish to make into a *.MPG equivalent.
This will automatically build a Graph ultimately providing an output to the Video Renderer and Default DirectSound Device.
4. Remove all filters except the *.DVR-MS output box.
5. Click on 'Graph' then 'Insert Filters' within Graph Edit.
6. Go to the 'Direct Show Filters' section and add 'Cyberlink MPEG Muxer' (MPGMUX.AX) to the Graph.
7. Now add the 'Cyberlink Dump Filter' (CLDUMP.AX) to the Graph and it will prompt for a filename give it a name with a .MPG extension. i.e. Test.mpg.
8. Leave the Filter addition window and connect the DVR Out-1 connector to Audio In on the 'Cyberlink MPEG Muxer' on the Graph.
9. Also connect the DVR Out-2 connector to Video In on the 'Cyberlink MPEG Muxer'
10. Next connect the Output pin from the 'Cyberlink MPEG Muxer' to the 'Cyberlink Dump Filter'
11. You are now ready to get your MPG equivalent file click on 'Graph' and then 'Play' (or click the green play button)
12. You'll notice a green progress indicator moving from left to right. Once complete you will have successfully dumped your MPG file in the same quality it was recorded without re-encoding!!!
Note: The MPG file should be slightly smaller the the original. Don't worry if they are not exactly the same size as we have stripped off the ASF guff.
You can do what you want with the MPEG file. i.e. Convert to AVI, Deinterlace it, Crop It, Resize it, Burn it to DVD/SVCD...etc etc
It worked fine with the two files I tried, but I then ran out of time to try doing something with the resulting MPG files. As I was using RDC to connect into the Media Centre, even playing them wouldn't work as expected. I did try VirtualDub but it didn't like the mpg file, but I am not sure if this was a RDC issue or an issue with the mpg files.

Re: Satellite P - Windows Media Center issue

Similar Messages

Maybe you are looking for