Re: Satellite P200 PsPB3C-BB808C Cannot locate Multimedia Controller

I have just upgraded my neighbours' Toshiba Laptop to Win 7 after a bad Vista crash.
It is a Satellite P200 -BB808C.
When I started there were two drivers missing, the Mass Storage Controller and a Multimedia Controller. I did a clean install, starting with formatting the drive.
Windows 7 loaded A-OK and all Toshiba drivers were installed following the recommended sequence. I was able to locate the driver for the Mass Storage controller but as yet cannot find anything for the Multimedia Controller.
I have been alternating between the Canadian and USA site with no luck.
I have also spent a lot of time Googling different variations of the same question, trying to locate some info on this driver. It seems a lot of people are having the same problem.
So far the system is performing very well with no glitches or hang-ups.
Any suggestions would be appreciated.
Thank you.

Thank you for the prompt reply.
Yes I have checked that out already.
There are no details given in the device manager for this item. There is a code 28 for this driver and an exclamation mark by the controller name.
It gives the location as PCI Bus 6, device 0, function 0.
The driver, details and resources tabs are all empty, no details whatsoever.
I was wondering, perhaps I should try re-installing all the drivers, etc.
Your thoughts.

Similar Messages

Satellite P200-P144: I cannot get the WPA to work on Intel 4965AGN

Hi there, having problems getting WPA to work on my laptop - P200-144. I can get a connection without WPA however I need to use WPA. I keep getting a time out error.
I have updated firware on my 3COM router and I have updated the wireless device on the laptop (intel) I'm using a 3com
ROUTER:-3COM 3CRWDR100A-72
LAPTOP :Intel® Wireless WiFi? Link 4965AGN network
are these items conpatable or is this a configuration issue on the OS vista

Hi
I have'nt tried WEP to any great extent, however I recall it not working. I can connect when no security on the Router. Also noted that if I enter an incorrect netkey the error message changes to one suggesting passkey incorrect? with correct passkey I get timeout error
cheers
Message was edited by: jknigh24

Cannot locate custom controller class after applying OIE.K patch.

Hi,
I am trying to search all the region level personalizations(on Update Allocations Page in iExpenses while creating Expense Reports) to find out where our custom controller class is being called(it was personalized at site level). But no luck until now.
Nevertheless, we were able to locate our custom controller class in an instance where the OIE.K oracle patch was not applied. Seems like after applying this patch, the seeded region names are changed too. Our custom code also works but cannot figure out where our CO is being called.
Any suggestions please?
Thanks,
Swati.

Guys,
Using "About the Page" link on UpdateExpenseAllocationsPG, I found SplitCriteriaTblCO controller class instead of UpdateKffCO class, that was extended to HumUpdateKffCO custom class.
Our custom code is still intact even though we do not find our custom CO. Probably we have to look elsewhere to find it, no idea!.
I just need to know how to remove our iExpense extension. In order to remove the iExpense extensions in the instance where the OIE.K was not applied, we just removed the personalization at site level, where the controller HumUpdateKffCO was called and that took care of it.
--Swati.

After some upgrades on my Satellite P200 cannot use HD-DVD Player

Since I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player), I can no longer read my HD-DVDs
Error message is: "Unable to send the video to an external device. Please turn off the display device."
I had no problem before the upgrades.
I have no problem with my DVD player on medias.
What happens?
My drive is a HDDVD SD-L802B.

I installed on my PC (P200-1DE / PSPB6E / OS Vista) proposed TEMPO software.
This software referred me to the site Toshiba and proposed several updates to:
- The BIOS (2008)
- HD2600 Drivers ATI card (2008)
- HD DVD Player
- VAP Package
At this time, I try to find the references on the site, but I am surprised ; they are no longer in the "Downloads & Drivers BIOS site TOSHIBA
I downloaded the drivers on my PC.
I can give you the exact references tonight (I write on another PC).
Were there any problems in the proposed updates on the period of November 2007 to the end of February 2008 ...
Besides, the problem of reading the HD DVD, I have not noticed any major problems except perhaps:
- I start a bit slower (It seems to me that this is the connection to the Internet via WiFi, which slowed the start)
- an error when burning a CD
- a problem of installing software as the DVD no longer wanted to stop rotating; I had to stop and to do again PC installation
Do I go back? ...
I made a Ghost of my machine before these updates, but if it is a problem of BIOS, I think I will not be able to do

Can't install a clean Vista 64bit on Satellite P200-1I6

Hello,
i have Toshiba Satellite P200-1I6. I have Product recovery DVD which works, but I want to do a clean install of Vista 64bit OS but
my toshiba won't but any Vista version - only Toshiba product recovery DVD.
Does someone knows how to fix that?

Usually the notebook would boot from the CD/DVD drive after pressing the C button.
You could also press F12 to get the boot menu on the screen. Then you could choose the CD/DVD drive as a boot source.
But if the notebook cannot boot from DVD then its possible that the DVD is not readable for the CD/DVD drive.
Try different DVDs from different manufacturers... I made a good experience with DVD-R TDK

Satellite P200-1FT: 1680x1050 @ 60Hz not available on external 22" TFT

Hi,
I bought a Toshiba Satellite P200-1FT some months ago (Graphic card: ATI Mobility Radeon HD2600). I wanted to use a 22" Hanns G HG216DP with its native resolution of *1680x1050px @ 60Hz* as a primary external monitor.
I connected my notebook to the TFT over HDMI. Unfortunately I cannot select this display setting in the Catalyst Control Panel. There is only 1680x1050 @ 30Hz available :(
Has anybody got the same problem? How can I fix it?
Thank you very much,
XeroX

Jayjay is right. Sometimes these issues can be caused by a bad cable, but I doubt this in your case.
Maybe you could try a HDMI 1.3 cable. You can get this in nearly every well sorted electronics store.
I remember that there was an option in the Catalyst control panel. Make sure the "Reduce DVI frequency on high-resolution displays" is unchecked. Helps for high resolutions.

Intel VT in the Bios of Satellite P200-13F disabled?

Hi,
I just bought a toshiba Satellite P200-13F and now I am finding out that the Vitrualization cannot be switched on in the BIOS.
Can anyone tell me if Toshiba is planning to release a BIOS with this feature supported? I want to use the machine for virtualization with XEN.
Thanks in advance,
Michael

Hi people,
I think then toshiba hasnt implented it in the bios yet. Maybe the option is available because the bios images are maybe from a chipset manufacturer but they just didnt enabled it cause they had not implemented all VT routines in the bios to handle the VT-stuff of the Chipset/CPU.
This is just an really wild theory about VT in toshiba laptops and I dont know when they will do it and release a bios where you can enable it.
Greets

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Satellite P200- Power Saver in XP not working

Hello,
I have decided to make another thread so that more questions can be answered. Right so I installed Power Saver Driver and then a reboot and then I install Power Saver but when I try to access it from Control Panel I get a message saying "CANNOT open because you do not have access right to use "TOSHIBA Power Saver". Now when I go to the SYs32 directory and look for Toshiba Power Saver related files I find a file called TPSBattM and when I try to run that I get a "A Fatal error has occurred, Code: 0x2".
I have tried re-installing and removing but it still isnt working. Does anybody have a fix for this since this problem has been bugging me on older laptop ever since and TOSHIBA still haven't sorted it out.
I can't seem to find the Common Modules for the Satellite P200-144. If somebody could find them then it should start working again.
Thanks and please somebody try to help me.
neo-tech

Why you start different threads about one and the same theme?
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=114278#114278
You should follow the first one!

Satellite P200: Vista doesn't make a bakup

Hello,
From time to time my Satellite P200 will not make a backup. It gives an error message after almoust 10 seconds.
But when I'm not realy using my notebook it seems that he takes an automatic backup.
To be sure I would like to use Thrue image again with a Sata HD
Anybody having experiance with this???
Thanks
Luc

Hi
I dont use the True image software and therefore I cannot provide any 100% solution for you problem
But Ive goggled a little bit and it looks like an new patch and update is available for Vista support possibly its a software bug and therefore the image creation doesnt work always.
PS; I use the ghost and this software is really a good solution if you want to create the own images.

Satellite P200-P100 - Black screen after a Windows 7 update

Hi,
I have a Toshiba Satellite P200-P100 running Windows 7.
A few weeks ago, after a Windows 7 Update, my monitor would not show any image, it would light up, but still no image. Not even the BIOS it would load.
I fixed it by using System Restore using another monitor. The same happened again today, I must have ran the same update, but this time a system restore did not solve it, neither did reinstalling Win 7.
Any suggestions?
Thanks,
Spre3

Hi
You mean you cannot see anything on the internal nor the external monitor even switching the display output pressing the FN + F5 buttons???
Hmm. in my personal opinion this has nothing to do with the Win 7 update
I mean the Win 7 OS update/installation should not affect the BIOS and you should be able to access the BIOS even if no operating system would be installed on the HDD!!!
So I assume the whole issue could be related to the motherboard issue or some parts placed on motherboard
Did you try this?
Remove the battery and disconnect the AC adaptor
Then wait a little bit (1hour) and then connect both parts again.
Then try to power up the unit
If this will not help then the RAM modules should be checked.

I have music in my library that has a (!) nest to it and i cannot locate it on my computer at all i have looked everyway i have a windows 8 computer and i tranfered all of my music from my old computer please help if you can.

i cannot locate my music from itunes anywhere on my computer. i have a windows 8 computer. i tranfered all my music from one computer to another and now it is lost. is there an easier way to transfer music from one computer to another i did it via a external hard drive. please help i would love to listen to my music again.

Have you seen this article related to your issue?
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
B-rock

My iTunes account says that it cannot locate the original file for all of my songs. My iPhone still has all the music and is able to play the songs, if I sync and backup my iphone will the songs be replaced with the empty copies from my itunes library?

So basically I tried to back up my itunes library to my external hard drive and when I followed the instructions and then went to play a song it said Orginal file cannot be found. It said that for all of the songs. I'm not sure how to fix what I did, I already tried consolidating and all of that stuff and it didn't locate the files. I'm guessing that I somehow deleted the original songs along the way. I synced my iPhone without knowing what I did and surprisingly all of the music is still on my phone. So now that I've completely screwed up my iTunes account, I need to know how to get all my music back onto my iTunes account and have that library only on my external hard drive, not my computer. Everything looks fine on my iTunes besides the fact that it cannot locate the files but what I'm afraid of is me syncing and backing up my iPhone and then being left with no music because it syncs to the empty songs. How can I fix this? and if I can't fix my iTunes library is there anyway for me to still be able to backup my iphone and all the music on it, without erasing my music?

Well I'm not sure if I correctly backed up my itunes library because when trying to open itunes from that back up it keeps saying original file not found. Okay this is going to sound confusing but bear with me. I "backed up" my itunes, meaning I just dragged and dropped the iTunes folder into my external hardrive, and then I changed the destination on iTunes to open from my external hardrive. It was working fine when I did that, however I did that just on my own, I didn't know about consolidating the files or any of that so I hadn't done that before copying the folder to my external hard drive. I can't remember but I'm pretty sure I deleted the iTunes folder after I had copied it to my external hardrive. So I did that and it was working fine, I was able to open my itunes with my external hardrive. BUT yesterday I thought that I hadn't done it correctly because I didn't consolidate the files and all that, so I wanted to be more thorough and do that, I followed the steps to do that but when I did that I think it got all the files from my computer and not from my external hard drive so it basically didn't find anything on my computer because I had deleted them. And like an idiot, I replaced the iTunes folder on my external hard drive (the one I did correctly the first time), with the one I did wrong. So I believe I pretty much deleted all the music files from both my external hard drive and my computer. Please correct me if I'm wrong?
I believe getting all my music back on my itunes is a lost cause. BUT I still have all my songs and stuff on my iPhone. My question is, if I plug my phone into my computer and sync it, will it erase all my songs from my phone? A little more info, my iTunes still has the names and stuff of all my songs, they just can't be played because the files are missing, my iPhone doesn't need to erase and sync when I plug in my phone because it's already synced to my computer. What I'm afraid of is when I plug in my phone to backup and sync, will it erase my music because it can't find the files on my computer or external hard drive anymore? Or will it just leave the songs because they're already there (on my phone) and only sync the new songs that I've downloaded? I just need to know is my iTunes still going to be functional as far as me being able to backup my phone?
I have a lot of songs purchased from iTunes but a lot (like 60%) are from CDs that I no longer have. So re-downloading my music would only account for 40% of my library.

Data Refresh Error: We cannot locate a server to load the workbook Data Model.

Hello,
Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
Model."
The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
So, I am looking for permanent fix for it.
Following are additional details about our SP Farm:
No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
PowerPivot Server is installed and configured from App 2 server.
Error Log from event viewer:
Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.Type.GetType(String typeName, Boolean throwOnError)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
PerformancePoint Services error code 10107.
Thanks,
Ibrahim

Hi ibrahim,
Please try to do the following steps:
1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
http://www.microsoft.com/en-us/download/details.aspx?id=26728
2. In the Application Management section of the Central Administration home page, click Manage service applications.
On the Manage Service Applications page, click the Excel Services service application that you want to configure.
On the Manage Excel Services page, click Data Model.Click Add Server.
In the Server Name box, type the name of the Analysis Services instance that you want to add.
3. Check the thread below:
https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
More information:
https://timpanariuovidiu.wordpress.com/2013/02/14/71/
https://support.microsoft.com/kb/2769345?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

HDD and memory upgrade on Satellite P200-17C

Hi there
I own Satellite P200 17c. My current memory is DDR2 PC2-5300 2gb. I would like to upgrade it to DDR2 PC2-6400 4gb ram. Can i do that and is there going to be some improvement of the speed if I upgrade to PC2-6400 instead PC2-5300?
On my P200 17c I have 2 HDDs. 2x100gb. I would like to upgrade one of those two HD from 100gb to 320gb 5400 rpm. Can i do that? and is it going to be some difference if I upgrade with HD that has 7200 rpm?
Thank you

First of all: your machine is able to handle a maximum RAM capacity of 4GB but please be aware that you wont be able to use the full 4GB due to some chipset limitations which are explained in the following article: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
Regarding the module speed: the chipset specifications are defined for PC5300, so it will not enhance your speed when installing faster modules.
If you would like to upgrade your harddisk then just do it like you want, because there shouldnt be any limitations, you can install a drive with 7200rpm together with a slower one.
The only difference will be that the faster drive will be faster. The whole system performance would only raise when youre installing your OS on the faster drive (which is recommendation from my side :) )

Re: Satellite P200 PsPB3C-BB808C Cannot locate *Multimedia Controller*

Similar Messages

Maybe you are looking for

Re: Satellite P200 PsPB3C-BB808C Cannot locate Multimedia Controller