Re: Satellite P300D-10U: installing Toshiba Power Sawer on Win XP SP2

Please help with installing the Toshiba Power Sawer on Windows XP SP2
I have a laptop Toshiba Sattelite P300D.
Installed all Windows XP driver from the site including the Toshiba driver for AMD processors.
Then install the Toshiba Power Sawer and not what happens, only the CPU load by 50% approximately.
In what may be the reason that it is necessary to install Toshiba Power Sawer?

Hello
Is Power Saver installed now or not? Im a little bit confused
Normally in Power Saver properties you can change the CPU processing speed. If you use the high performance profile, you can use the highest CPU speed. Furthermore this can be changed manual for every profile.
For using Toshiba Power Saver, make sure the Power Saver profile is set as Windows Power scheme

Similar Messages

Satellite Pro M70 - Can't install Toshiba Power Saver Driver

Hi, I can't install toshiba power saver driver on my laptop because instalation crashes with error 1610: The configuration data for this product is corrupt. Contact your support personnel. I tried more versions of power saver driver. I got latest official chipset driver..Know somebody how to fix that?
My second problem is with battery, my laptop running on battery for max 10 minutes (i got my laptop 2 years) and i dint using battery supply often. Can battery loose so much capacity in 2 years even if i used to my battery once a week?
Sorry for english and thx for reply

I believe you must not install this driver, only Power saver utility only.
What to say about battery? In my opinion it is possible. In my opinion the battery life time cannot be defined so easy.
Some batteries run well after 3 years of usage and some of them are death after one year only.

I cannot Install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

I cannot Install/reinstall/remove/run Toshiba power saver on my Satellite M45-S169. after I have reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via control panel I got accessed denied and every time I reboot the system I get the error message:
Toshiba Power Save
A fatal error has occurred. This programme will be terminated.
Code: Ox7E
I cannot neither remove nor reinstall power saver. Can I try to run power saver for Windows XP SP2 applicable for other laptop models? I could not find the one for my model. Which one will fit? Any other solutions/advises to the problem?
Please, help
Thank you a lot, Oksana

Hi
First of all you have to known that this notebook was designed for the US market and all drivers, tools or any other Toshiba utilities should be used from the Toshiba US website.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
Please ensure that you have already installed Toshiba ACPI Common Modules before you will continue with any further Toshiba software installation.
One important hint; the Toshiba power saver profile must be chosen in the Windows power options!!! Dont forget this!!!

Receiving error message when trying to install Toshiba Power Saver

Recently toshiba power saver stopped working - I removed it and redownloaded it from this website, now whenever I try to run the install i get a "unable to machine id" message and the install stops.
First time posting here so If i'm on the wrong forum or you need anything else apologies in advance.

Hi there,
where did youve downloaded the powersaver? Maybe you downloaded the wrong one for your machine. Its absolutely important to download EXACTLY that software which fits your machine type.
When downloading stuff from toshiba websites you have to keep an eye on the version of your machine (e.g. Satellite A100-552 -> download the software for type "552" of the Satellite A100 series).
This sometimes resolves many errors and clarify some not very nice situations.
Please, more details on your problem. :)
Greets

Satellite Z830-10U does not power on

Greetings;
I plugged my Satellite Z830-10U into power and left it powered on for half an hour and then I saw it like hibernated (screen off). Then it was left for 20 hrs from yesterday plugged into power outlet.. Now it has
its "DC-in" indicator flashing orange, power on indicator is green steadily, the eco indicator is also on and green. The screen is off and it is like the system shutdown.
The problem is that the power botton does not work and pressing it (either for a short or long time) has no
effect. I plug the AC adaptor into power while connected to the computer and I see the battery indicator goes
green and stays green until I unplug the AC adaptor from power outlet or disconnect the charger from
computer.
How can I turn it on and get back my files?
Thanks in advance.
M. Shams

> How can I turn it on and get back my files?
Well, the files are on the HDD
So you can remove the HDD from the notebook and you can use an external USB to SATA controller /enclosure in order to connect the HDD to another computer.
This would be the easiest way to get the access to the files
The other story is the notebook power functionality
For me it looks like its hardware related issue and in such case the unit needs to be checked by service technician hopefully its not a motherboard because in such case the mobo needs to be replaced and this might be a costly affair
Is warranty valid?

Satellite A205-S7464: How to install Toshiba Common Modules for XP Pro SP2

Greetings all.
I have a new laptop that came preinstalled with Windows Vista Home Premium as they tend to.
Vista does not run a number of the programs I need to run, I've found, and I really don't like it that much anyway..
I have decided to install Windows XP.
I partitioned the HD and ran the installer to a new partition on the drive with all of the drivers I've collected for XP sleepstreamed into my retail XP Professional disc. This is no problem. I got everything up and going just fine. My only problem now (well, other than some residual issues with the original Vista partition) is that I can't get the proprietary Toshiba utilities going so that I can use for example the FN+ commands, power management options, etcetera.
I have experimented around with a couple of different versions of the Common Modules drivers and other utilities but have of yet been unable to get things moving in the direction I would like them to move.
The main thing really is the control for FN+F6 and F7 (Adjusting brightness), as the monitor on this beast kills a battery.
I've tried Toshiba support, but with no luck.
I know the Vista to XP downgrade is a pretty common move, so if anybody has been there and could give me a little step by step guidance in getting things working I would be forever indebted.
The model is Toshiba Satellite A205-S7464, Part No. PSAF3U-07300V.
Let me know if any other information is necessary.
Thanks in advance, Jacob

It seems to be a notebook series which were delivered only in the USA and therefore all Toshiba drivers and utilities should be installed from the US site.
This is a Toshiba US driver page:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
Where did you find this Common modules driver?
> I have experimented around with a couple of different versions of the Common Modules drivers and other utilities but have of yet been unable to get things moving in the direction I would like them to move.
I presume you are not able to install these common modules because you have used wrong version which is not designed and not compatible with your notebook.

Satellite P100-488 - Installing Toshiba tools and utilities on Windows 7

Hello everybody,
I have purchased a pre-order of Windows 7 Professional for my laptop and would like to upgrade it from Windows Vista Home Premium installed on it at the moment.
However, I just have one question :
- Do you think I will be able to upgrade from Windows Vista Home to Windows 7 Professional without a full install ?
- Else, if I have to perform a full install, then is it possible to install the Toshiba tools and utilities from the CD (I have not found anything to do this) ?
Many thanks in advance.
Fred

Hi Fred
As I can see you have two questions. ;)
At first I must say that I don't believe anybody here will be able to offer exact answers but here is my opinion:
Q1 for OS installation I prefer full installation but I think you will be able to make Win7 upgrade. Problem is how the Toshiba tools and utilities will work after this upgrade. As far as I know in the past Toshiba has suggested removing some tools and utilities before upgrade installation starts.
So maybe you should think about full OS installation. I think it is better solution for you.
Q2 I the whole story I see one problem what if Toshiba will not offer Win7 support for your notebook model? Then you will have problem and just try to use Vista stuff in hope it will works with Win7 too. Anyway, in this forum you can find many postings where people confirm that most of Vista stuff runs well with Win7.
Good luck Fred.

Got error code 2869 when installing iTunes 8.2 on win xp sp2

anybody can tell me how to resolve it ? thx

Hello,
Another weekend, another round of trying to get this to work - I have no life
I found the log file and it's pretty clear on the error:
2008-07-13 14:54:50                               --- Starting GMT 2008-07-13 13:54:50           7.6.03   Build 009-123-163-622
2008-07-13 14:55:20      0x154 ERR 18499 IO       Wrong path 'J:\sapdb\J2E\sapdata\DISKD0002'
2008-07-13 14:55:20      0x574 ERR 18499 IO       Wrong path 'J:\sapdb\J2E\sapdata\DISKD0001'
2008-07-13 14:55:20      0x618 ERR     3 Admin    Database state: OFFLINE
2008-07-13 14:55:20      0x618 ERR     6 KernelCo +   Internal errorcode, Error code 9050 "disk_not_accessible"
2008-07-13 14:55:20      0x618 ERR 20030 IOMan     +   Formatting of data area failed
2008-07-13 14:55:20      0x7A8 ERR     7 Messages Begin of dump of registered messages
2008-07-13 14:55:20      0x7A8 ERR    10 Messages abort dump of registered messages
2008-07-13 14:55:20      0x7A8 ERR     8 Messages End of the message list registry dump
2008-07-13 14:55:21                               ___ Stopping GMT 2008-07-13 13:55:21           7.6.03   Build 009-123-163-622
So, drive J: is wrong (I'm installing on D:), and I cannot find any files by that name. Seems the installation scripts are screwed. I will try installing to disk J: and revert back.
Thanks for your input.
Cheers,
Mike

Cannot install BI publisher Desktop under Win XP SP2 with Office 2003

Hi Gurus,
When I tried to install BI publisher Desktp 10.3.2.1 on my PC, winxp sp2 with MS office 2003, at the end of the exe file excuation, I got a error like that:
Run-time Error '9': Subscript out of Range
So I cannot install it, do you know how to solve this problem?
I got .net framework 2.0 and jre,
I also install Adobe Acrobat 7.0 professional.
Many thanks!
Peter

Any idea? urgent!!
I googled this error and got the following infor:
9 Subscript out of range
Program error,
verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
Peter
Message was edited by:
PeterCN

Re: Satellite L300-17l - Toshiba Power Saver gives me error after install

When I bought my L300-17l all drivers from Toshiba drivers download pafe worked ok.
Recently I reinstalled my XP OS and now I started installing again all the drivers. LAN was ok, WLAN was ok, Display driver was ok.
But when I get to install Toshiba Power Saver ( URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip] ) it gives me this error ( it shows the error either after I click finish on the instalation or before installing has begun, as you can see on this screenshot ) - [http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]
I tried later this - i go ot control panel and open Toshiba Power Saver, but then it gives me another error - " CANNOT open because you do not have access rights to use "TOSHIBA Power Saver".
I reinstalled again my XP and it still gives me this error....I wonder what the problem could be....PLS help me

Hi
Satellite L300-17L belongs to the PSLBCE series.
I chosen this model number and found exactly the same power saver which you have tried to install.
Therefore I assume you have chosen the right Power Saver Utility for this notebook model.
But did you install also the Common Module?
This software should be installed firstly before any other tools installation.
Did you update the Win XP to the latest state?
Check this!

P30: I need a 32 bit version of toshiba power saver installer

Hello,
I need a 32 bit version of toshiba power saver installer for the P30 please, I hope that it is possible :)
Thank you in advance :)
Sincerly, James.
Message was edited by: jamespic

thank you for your support :)
i am actually talking about the toshiba power saver for P30 for windows xp, driver installer is 32bit.
however, the sofware insatller setup.exe is 16bit, you can notice it by reading it's description with windows os.
of course, if you disable 16 bit support, you can't install toshiba power saver anymore.

Toshiba power management and BIOS-Satelite M30X

Hi!
I've just installed XP PRO with SP2. I tried to install Toshiba Power Management tool. At the end of installation blue screen appeared and system rebooted. I tried bios upgrade (windows flash)and just after flash procedure started system hanged.
Icouldn't reboot even pressing poweroff button for several sec's. What is the problem? If possible reply also for private email [email protected]

Hi,
had you read the "Driver Update Information for Windows XP with Service Pack 2" which is available at http://eu.computers.toshiba-europe.com in the driver download section!
For BIOS update I can only say, if the notebook doesn't start anymore after BIOS update, you have to contact a Toshiba Service Partner for diagnostics! When you see the red Toshiba logo at boot up you can try it again.
At http://www.toshiba-tro.de/gcc/biosinfo/index.html you will find some further infomations about BIOS update procedures!
Bye

Error when installing Toshiba Tools and Power Saver

Hi,
I have a Satellite A100-771 and installed Windows XP Professional with SP2.
Afterwards I installed all drivers. After that I wanted to install the Toshiba Utilities and have got an error message : "Toshiba common Module not found! This setup will terminate."
Furthermore I tried to install the Power Saver Tool, which is more important as the uilities I think. And here I have got the error message: "A fatal error has occurred. This program will be terminated. Code:0x7E"
I am not sure what I can do else. I also installed the hotfixes for Windows which are on the ToolCD from Toshiba. But the problem is still there.
The difference between both errors is that the installation of the utilities setup stop before finishing installation. On the Power Safer installation, it finished on 100% and terminate the setup or the program after the installation.
May somebody can help me.
Eathen

There is a specific order that the Toshiba utilities and drivers have to be loaded in. This list is on the Toshiba download page, and the common modules is one the first utilities that has to be loaded for the others to work

Toshiba Power Saver fatal error 0x51A on Satellite M115-S3094

Hello,
By the subject, the problem is there. Unfortunately, my computer which is the Toshiba M115-S3094, just recently had a Fatal Error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it no longer even shows on the taskbar.First, I went to the Power Properties to restore the proram, but to no avail.
Then, I tried uninstalling and subsequently re-installing the program and it still gave me the same problem with the Error: The program will be terminated. Fatal Error 0x51A. So right now, my laptop is not running on the Toshiba Power Scheme but on the common Windows scheme, like Presentation or Portable Laptop.
So I need help to restore the Toshiba Power Saver. I run the Toshiba M115-S3094 with Windows Media Center Edition.

Hi
The Satellite M115 seems to be a Toshiba US notebook because of the 5 at the end of the number.
In this case you should use the Toshiba power saver from the Toshiba US site. Did you???
Maybe you have used the right Power saver utility, so possibly some registry or any system files keys are damage in such case the new OS installation from the Toshiba recovery CD would be advisable.

Satellite A660-11M on Windows 7 - Toshiba Power Saver does not work

I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!

Toshiba Power Saver is only for XP installations, you can't install the XP Drivers (and most Vista Drivers) in Windows 7.
Make sure all your drivers are for the A660, and make sure they are for Windows 7.

Re: Satellite P300D-10U: installing Toshiba Power Sawer on Win XP SP2

Similar Messages

Maybe you are looking for