Re: Satellite P750 - need instructions how to access and replace Wi-Fi adapter

I have searched all over the web to find a guide on how to replace the wifi adapter or at least which screws to remove before lifting the keyboard out. I presume that the wifi adapter sits underneath the keyboard and is accessible by removing the keyboard .
Case is that I wuld like to use widi and therefore I need to replace the atheros adapter with an intel one.
I will probably end up doing this even with out instructions. So any help would be greatly appreciated so as to avoid any damage to this wonderfull machine.
Further I could use tips on wireing should I stick to a two antenna card, and is the card interchangeable as to existing wireing. I don't know maybe one of the antenneas is in support of blutooth functionality. WIll it be okay just to attach the antennas to the new wifi 'only' card in their current configuration.
Best,
Jesper

I agree with user above.. its a new notebook and Im wondering why you want to risk warranty cancelationif I would be you, I would not do that
However, in order to remove the keyboard, some screws needs to be removed.
The battery should be removed too.
At the bottom, near the memory bay you have to remove two screws and 3rd one is placed near battery bay.
Then open the display panel and insert a pin into the opening in the battery bay to push the keyboard free. Lift up the keyboard and free it from the logic upper assembly. Disconnect the cable on the back of the keyboard from the motherboard and remove the keyboard. There you should see the WLan card.
The black WLAN antenna cable should be connected to (aux). Its the connector on the left of the WLAN card, and the white WLAN antenna (main) to the connector on the right.
But once again would not recommend doing this as this would cancel the warranty and you could also damage other parts.

Similar Messages

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

Logical database PSJ: How to access and link tables inside that???

Hi,
I have a requirement like :
I have to write one report which will display project statuses (PSmodule) using the LDB PSJ.. I am using LDB because I neeed dynamic selection screen.
I need to acees the data from table like 1. PROJ, prps_r and JCDS under the LDB PSJ.. but when I found the hirarchy of these table in the LDB , then all 3 tables are at same level.
then How to access and link data from theses 3 tables using GET and LATE command.
I did like below, but wrong number of records are coming
START-OF-SELECTION.
GET proj.
GET prps_r.
GET elm_ps .
GET jcds.
can anyone tell me, what 's wrong here.
points will be rewarded
for proper answer.
Regards,
Mrunal

hi ...get is like a loop in ldb. then if you use the 3 get statements then it will loop with in a loop with different data..

Satellite A30-921: How to remove and replace the memory?

hi, can anyone help me how to remove and replace the memory of sat A30-921. and also, please give a detailed instruction.
thank you in advance.

Hi
There is no much to explain. At the bottom side in the middle there is placed memory cover (fixed with two screws). Remove the cover and you will see 2 slots there. I dont know how much memory has you there but as Stefan said you can use max 2 GB of RAM (2x PC2700 1024MB - PA3313U-1M1G). How to remove memory modules you can see on http://www.hardwaresecrets.com/article/189/5
Bye

HT2534 How to access and install appstore free apps without providing credit card number because I do not have one?

How to access and install appstore free apps without providing credit card number because I do not have one?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

How to remove and replace keyboard on HP Touchsmart Notebook 15-D020NR

I spilled a drink on my keyboard and now I cannot get the Caps Lock to turn off and a number of keys do not work. I need the instructions on how to remove and replace this no frame keyboard. Thank you.

On your Support page- look for Maintenance and Service Guide under Manuals. http://support.hp.com/us-en/product/HP-15-d000-TouchSmart-Notebook-PC-series/6627588/model/6761859/manuals

How to find and replace any string between " "

Hi everyone,
Here my sample
String szTest;
szTest = "Yellow banana";
szTest = "Blue monkey";
szTest = "Red mango";
szTest is only needed when it's in testing progress. Now I want to put all of that in the /*comment*/ so the released program won't run those code any more (but still keep szTest so I can use it for future develop testing).
So Here what I want after using the Find and Replace Box:
//String szTest; //Manual
/*szTest = "Yellow banana";*/ //use find and replace
/*szTest = "Blue monkey";*/ //use find and replace
/*szTest = "Red mango";*/ //use find and replace
I think I can do this with Regular expressions or Wildcards. But I don't know how to find and replace any string between " and ".
Find: szTest = " ??Any string?? ";
Replace with: /*szTest = " ??Any string?? ";*/
Thanks for reading.

Hi Nathan.j.Smith,
Based on your issue, I suggest you can try the Joel's suggestion check your issue again. In addition, I find a MSDN document about how to use the Regex.Replace Method to match a regular expression pattern with a specified replacement string,
maybe you will get some useful message.
https://msdn.microsoft.com/en-us/library/xwewhkd1(v=vs.110).aspx
If the above suggestion still could not provide you, could you please tell me what language you use to create the program for finding and replace any string using regular expression so that we will find the correct programming develop forum to support this
issue?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, a

how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

In Pages, how to search and replace text involving invisible characters?

In Pages documents, how to search and replace text involving invisible characters, colors and font sizes—a task which is so easy in Mircosoft Word?

I read that an older version of Pages allowed users to enter special characters in the search/replace fields, but this did not work for me.
Here: http://www.macworld.com/article/1156533/pagesspecialcharacters.html
I still am looking for a way to do this.

I want to change my apple id primary e-mail from a .msn address to a .gmail address. The problem is that currently my .gmail address is my cover address and I cannot figure out how to remove and replace my gmail recovery address.

I want to change my apple id primary e-mail from a .msn address to a .gmail address. The problem is that currently my .gmail address is my recovery address; I cannot figure out how to remove and replace my gmail recovery address with a new e-mail address. I want to do this because I no longer use my .msn address.

You should be able to change your rescue address by going to My Apple ID, signing in to manage your ID, then selecting the the Password and Security section, and answering the two security questions. If you have trouble with this, contact the Apple account security team for your country to verify your identity and ask for assistance: Apple ID: Contacting Apple for help with Apple ID account security. If your country isn't listed, contact iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

Need instruction how to install Windows XP on Satellite A200-1AE

Hello can some one write a instruction of installing Windows XP Professional on this notebook?
What I need before instalation?
I have oryginal Windows XP. Which drivers i must have before? And what about boot?
I guess that my PC have SATA drive and XP setup don't support it.
Can I burn driver on CD? Becouse I don't have FDD.
Thanks for help.

You need instruction?
Search in this forum for similar threads about this theme.
You will find many threads!!
But here is a little hint;
You need to include the Intel matrix Storage Manager into the XP setup.
Without the iMSM the XP OS will not find the HDD!!!
The iMSM can be installed using the USB FDD drive or you can create a new XP CD using the freeware tool called nLite.
After the OS installation, you should download and install the Toshiba drivers from the Tosh European driver page.
PS: should check the driver installation instruction txt file before you will start to install the Toshiba XP drivers

How to access and display a Web Service from a WSDL in JSP or JSTL ?

Dear All,
We need to access a Web Service which is hosted as WSDL How to access a WSDL file from JSP or JSTL, parse and display the SOAP response in JSP page.
Any simple example or URL as reference to an example will be useful for me.
It seems io tags of jakarta is able to send soap message, but how to display it in JSP.
Yours,
Sankar.B

Dear Sir,
Yes. I would like to know more about the Forte and how to consume WSDL file from JSTL. The following are my querirs.
1. How to connect the declared JNDI from a JSP page. i.e: the Datasource - ex: booksDS
2. We connect the Tomcat server using JNDI as jdbc/scott. But, if I give jdbc/scott in JSTL as datasource={jdbc/scott}, we could not able to connect. We use the following code in a JSP page to connect the DB from a JSP page. (Its quite easy to modify, so we use the connection in a JSP page.)
3. How to Consume a WSDL url from JSTL. Ex: If there is a URL : http://localhost/ws/MathService.asmx?wsdl OR http://www.xmethods.com/test/BabelFish
4. How to display the result. We tried via SOAP from io taglib of Jakarta, but gives us an SOAP (it also looks like xml) response. But, how to use the value from that soap response in IE client thru JSTL/JSP.
5. Whether this JSTL tool will be available with Forte Enterprise/Community Edition. If so EE, whats the price.
Please Reply Immediatly. We tried, trying, going to try to display a wsdl response, but not able to display in IE thru JSP/JSTL. But, weve tested the www.gotdotnet.com examples of asp.net web services, we are thru. Its quite easy it seems in .NET. But, we feel whether even there is not even one example in JSTL/ Java Web Services Dev. Pack to utilise a web service in full cycle. The example which uve given is thru servlets. We dont use servlets. Cos, its very easy to edit JSP pages, instead of compiling the serv. and using it.
I hope ull reply for all the above queries, since ur from SUN.
Expecting your fav. reply.
Yours,
Sankar.B

AS3: How to access and control embedded sounds in an external swf?

I rarely use sounds in AS3/Flash. I am using Flash Pro CS6, but I can't seem to figure out how to access, control (play, stop, etc) sounds embedded in an external SWF loaded into the main SWF.
It's easy to control them when embedded on the main swf. However, on an externally loaded SWR, I get all kinds of errors. For this app, I really need to embed them in the external SWF.
I read several solutions, but none seem to work.
I embed the sound an mp3 file called soundSegment1.mp3 using Flash CS6 import tool and then open the actionscript properties panel on flash to select the class name: SoundSegment1. Then I edit the class code and create a file called SoundSegment1.as and it's saved right next to my document class main.as in the same directory. The code of the SoundSegment1 class looks like this:
package {
    import flash.media.*;
    public class SoundSegment1 extends Sound
        public function SoundSegment1 ()
            // no code in here
        public function playSound()
            var soundSegment1:Sound = new SoundSegment1();
            var channel:SoundChannel = soundSegment1.play();
Then, in my main.as, I have done several attempts to play this sound such as:
var fileLocation:URLRequest = new URLRequest(SWFToLoad); loader.load(fileLocation); loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressListener); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeListener); loader.contentLoaderInfo.addEventListener(Event.INIT, initListener);
function initListener(e:Event):void // I also placed this code on the completeListener and it didn't work {      loader.content.soundSegment1.playSound(); // doesn't work. }
I get:
Line XXX 1061: Call to a possibly undefined method playSound through a reference with static type flash.display:DisplayObject.
or, I also read that I should be able to do something like this anywhere in the Main.as file:
var theClass:Class = Class(loader.content.getDefinitionByName("SoundSegment1")); var theSound:theClass = new theClass(); theSound.play() //doesn't work either.
I also tried on the completeListener:
var TheClass:Class = e.target.applicationDomain.getDefinition("SoundSegment1") as Class; var theSound:TheClass = new TheClass();
theSound.play() //doesn't work either.
I get:
ReferenceError: Error #1065: Variable SoundSegment1 is not defined. at flash.system::ApplicationDomain/getDefinition()
I am stuck and I really need to get this to work. I would be genuinely grateful for your help.
Thank you in advance for any help provided. I really need to get it to work, because I can't simply embed them in the main SWF or load them individually externally one by one.
Thanks again!

THANK YOU!
I think your code may be over my head though. I think you are using an anonymous function which is not something I am familiar with (but I want to learn about if it's useful).
I also don't know where the classS came from. I see that it's a parameter sent along with the event, but I don't really see where that came from.
Someone at: http://www.kirupa.com/forum/showthread.php?305098-Playing-a-embedded-sound-in-an-external- swf&p=2658098#post2658098
Is showing what seems to be an easier solution, but my problem there is I can't access the source file of the "child" swf.... ayayay.....
I am going to tinker with your solution and see if it gets me anywhere. Thanks so much for your help again.

How to access and control a Windows 7 computer from a Mac - long distance?

I bought my parents their very first computer. They are 2000 miles away in another state. Currently I have the computer in my possession to "set-up" everything so it is as seamless as possible when they receive it.
It is an HP with Windows 7. I have a mac. I would like to remotely access their Windows machine to help them when they need it - to be able to control theirs to show them how to do things and to do it for them if need be.
Thank you for your time
Pattie
This is a new thread. If you want to see the original info it is at this link:
http://discussions.apple.com/message.jspa?messageID=12832917#12832917

You are only as secure as web browsing to the LogMeIn website is (which appears to use HTTPS). If your login on that site is compromised, they will have a list of your computers that they can attempt to connect to. As long as you don't save the login credentials, they would then also need to know what username and password to use to connect to the computer. Granted, a little social engineering, and they could probably get some good ideas what to try for those, but if you chose to make your computers secure with complex and hard to guess passwords then it should be fine.
I've been using LogMeIn from my Mac to my mom's Windows XP system from July 2009, and to my wife's Thinkpad running Win 7 since Oct 2009. None of the computers involved have had any security issues at all, let alone any caused by LogMeIn. For my wife's PC, it sits behind our NAT Firewall in our LinkSys Router (although I did have it behind a CheckPoint VPN Edge router for a while). My Mom's PC sits behind a Netgear Router providing its NAT Firewall. When my Mac isn't at home, it's generally behind that CheckPoint VPN router at my office now. It all works nicely from behind one router to behind another. The Piece that you install on the PC will log it into the LogMeIN website and that is how it gets through the router to the PC. You login to the website, select the PC to control, then login to that PC.

Need help how to install and use html db

plz any body can help me i have download htmldb2.0 and want to install and use it with oracle but i do not know how to install and use it first time any body can help me in detail .
Niazi

Niazi,
Included in the 2.0 download are some very comprehensive Installation and Upgrade instructions, I would highly recommend you read those.

Re: Satellite P750 - need instructions how to access and replace Wi-Fi adapter

Similar Messages

Maybe you are looking for