Re: Satellite P845t - keyboard does not respond

Hi
I am on Satellite P845t with Win 8 and get a serious sensitivity issue with keyboard. It looks like the driver issue but was not able to find the keyboard driver on the website
so, now the main question is where to find it.
Sorry to be summary, but I had to be, because I can't really type... if I type normally
it cms lkehi asically
it becomes like this basically.
Yo

Thanks. I'm then a little lost. In terms of what to do.
It's preinstalled Win 8. 64bit.
Rather suddenly keyboard and touchpad started malfunctioning. I noticed the synaptic driver gone, so re-installed it to a good effect. I don't know how and when it was lost. Hence I thought it would be a driver issue.
Tried:
Toshiba and MS updates
safe mode booting
no luck yet.
Yo

Similar Messages

Satellite A300 - keyboard does not work sometimes

Hi,
the boot my Toshiba Satellite A300 Notebook the keyboard does not work sometimes?
After a reboot everything is ok!
Does anyone know why the keyboard does not work sometimes?
greetings

Hello
Do you notice the same behavior with external keyboard? So you can check if the problem is related to internal keyboard/mainboard or something else.
But its not easy to say something about these sometimes issues But if the keyboard would be really defective I dont see a big problem. Exchange is not so complicated and keyboards are not expensive. ;)

Numeric keyboard does not respond

hi, am a new mac user. installed gerat seems to enjoy and then my numeric keys on my bluetooth apple keyboard do not respond anymore. they do only to key into password at ogin. please help....

Hello charlotte:
Did you find the answer? If not, this may help.
http://docs.info.apple.com/article.html?artnum=42937
Barry

Satellite P845t-10G does not go to sleep closing lid after Win 8.1 upgrade

Hi,
I own a P845t-10g and since I upgraded to Win 8.1 the laptop does not go to sleep (or shut down) when closing the lid.
However, when opening the lid, it wakes from sleep mode.
I tried installing latest Toshiba systems settings utility and all updates on the support site.
Any ideas how to fix this?
Thanks!

Did you check the option called: What closing the lid does?
Click on the 'Power Options' icon in taskbar (or in control panel).
Then click 'More power options'. Now a new windows will open. On the left side panel click on 'What closing the lid does'.
Now you will see two possible mode: battery and plugged in. For each mode you can set the action for closing the lid.
BUT one question: did you upgrade the Win 8.1 following the instruction from Toshiba?
http://www.toshiba.eu/innovation/generic/windows8_1-message/ Did you install all the Toshiba Windows 8.1 drivers and utilities in the right order!?

Ibook keyboard does not respond!

Hi
I have a ibook with tiger installed. Everything is normal...except the keyboard. There is no response when I press any key, execpt the num lock key. What a strange thing!
Any solutions please?

This is very odd. Is this iBook new to you or did the problem just start? Was anything ever spilled on the keyboard that you know of?
You can go to System Preferences>Keyboard and Mouse and check on all the keyboard settings and maybe restore the defaults and see if this affects anything.
You might also go to the Apple site and find the DIY instructions for replacing the keyboard. What you want to do is to open up the keyboard and be sure the cable is securely plugged in. It almost sounds like it might not be.
There are a couple of keyboard articles in the Apple knowledge base that might help, but unfortunately I'm on a trip and don't have the exact references. You might try going to the iBook section of Apple Support and searching for these. There is one that specifically discusses the keyboard not working.
Good luck!

Satellite A200-14D does not respond to netsh command

Command +netsh wlan show settings+ indicates the name of the wlan interface on which MS windows automatic network configuration is enabled.
When I type +set autoconfig enabled=no interface="NameInterface"+ nothing happens. The first command show that autoconfig is still enabled.
What is wrong? What is the true "NameInterface" for A200-14D with Vist Home Premuim?

I really dont know why you need to set this but maybe you have to take a look onto this Microsoft Windows Vista TechCenter to get more details about Netsh Commands for Local Area Network
http://technet.microsoft.com/en-us/windowsvista/aa905084.aspx

Apple USB keyboard does not work

I have the same problem as described by Sweboss on November 15th, 2012. The Apple USB keyboard is working perfectly, but if I shut down the computer, when I switch it on again, the USB keyboard does not respond, and the computer is looking for a Bluetooth keyboard (which I had before). I have tried switching off, unplugging all peripherals, then unplugging the computer, waiting 15 seconds, then plug it in, wait 5 seconds (this is a remedy proposed in other mails). Switch on and the USB keyboard does not respond. It is not that particular USB port, as it works perfectly well with other peripherals like my scanner, or printer, and changing ports does not help. And when I tried it last time, I had no other USB peripherals connected. Can anyone help?

That is definitely some strange behavior, good to finally be working, but does not explain exactly what causes the behavior. Could have something to do with the energy saver part of the operating system, or a miscommunication with the USB bus itself. With multiple USB ports it would be good to test on different ports to see if that is an issue. Anyway, it is working now and that is good.
Another I don't know why but it works: a couple months ago a user was having problems with a wireless keyboard. The keyboard-iMac communication resulted in random charaters, time lag, and other bad behavior. The user finally found by accident that turning the keyboard off, removing the batteries, and then spending about five minutes just pressing keys, placing the palm of the hand on the keyboard and pressing, just pressing and pressing, and then replacing the batteries and turning on the keyboard, it worked fine. Seems like it is necessary to just force the keyboard to discharge all of the key switches. Those keyboards use capacitance switches instead of mechanical switches. So they retain a charge.
While that was a wireless keyboard, I wonder if that was what happened in a way with your keyboard...the unplugging and leaving it for a period of time, any charge may have dissipated and it would work again. If this happens again, try the above procedure and see if it helps.

After Recovery with CD Satellite C660-1FE keyboard does NOT work

Hello,
A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
I have:
tried finding and installing lots of drivers on from the toshiba website, no result.
tried changing settings in the bios (usb enable/disable).
tried to fix the problem by re-installing the entire computer again several times.
The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
+The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
+You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
Can someone please give me some help? I am at the end of my wits.
Sincerely,
Daniel

Hi MisterX,
thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
I wrote the following e-mail to [email protected]:
+Dear Toshiba,+
+after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
+My laptop: Satellite C660-1FE+
+serial: 5B378048K+
+Part-nr: PSC0LE 02M0TU26DU+
+Recovery CD's I received are CD's 1-3 with serial R14254DU+
+Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
+This would be greatly appreciated,+
+Daniel+
MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
Kind regards,
Daniel

IMac A1311 does not respond to any keyboard or mouse

Hello,
My iMac A1311 does not respond to any keyboard or mouse.
I can restart it. It starts without a problem, but I can't enter my account password or move the cursor.
I have tried using four different keyboards including the original bluetooth keyboard and mouse, an Apple wired keyboard, a generic wired keyboard and a wireless keyboard. I also tried resetting PRAM as well as NVRAM. I even tried to start it in Target Mode and tried to start it with a start-up disk (The disk remained inside the computer). Unfortunately, it all seems to originate with the same problem. The computer does not recognize the mouse or the keyboard. I believe I could rule out a problem with the USB port since the original keyboard/mouse uses Bluetooth.
Any suggestions would be greatly appreciated.
Thanks in advance...

Is this a wake from sleep problem, or after only after a restart?
If it is a 'wake from sleep' issue then since some point in OS X 10.6.x, through 10.7 and 10.8, some users (me included) seem to have the occasional problem with the Mac being unresponsive to any commands from the keyboard/mouse/trackpad, and the issue seems to be something to do with Bluetooth not fully waking from sleep.
The 'fix' that works for me 100% of the time is to go to System Preferences>Energy Saver and set 'computer sleep' to 'never'.
I keep hoping that an OS software update will come up with a 'proper' fix.

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

Satellite A300-129 - Sound is muted and icon does not respond

Dear all,
I am trying to switch on the sound of my Satellite A300-129 after I had muted it a couple of days ago, but the icon does not respond.
When I click on the right mouse button, I can go to sounds etc., but "Open volume mixer" does not respond either. I have also tried to restart the laptop a couple of times, but that did not help.
What can I do? Your help will be much appreciated.
Heleen

>How do I do that safely without risking losing sound forever?
LOL You will not lose anything for ever. :D in worst case you will have to reinstall the OS using the Toshiba recovery disk.
Access the device manager -> mark the sound card -> use delete button -> reboot the notebook
After new reboot the sound driver should reinstall again and should detect the sound card.

Satellite A200: Bluethooth Stack & Flashcard does not respond

My new A200 gives me a headache. After receiving the following message: Thank you for evaluating the Bluetooth Stack for Windowsby Toshiba. The evaluation period has expired. Please obtain a license for this version of Bluetooth Stack for Windows by Toshiba" I downloaded the Bluetooth stack Multilingual from Toshiba's homepage. It does not work, I receive still the same message and cannot use bluetooth anymore.
The second message I receive always is "that the Toshiba Flashcard does not respond" then Vista is looking for a solution but does not find anything.
The third problem is to include a second monitor. One time only it worked fine, but never again. I cannot control the second monitor via the Notebook, sometimes I cannot extend it, sometimes I can but the second monitor works in slow motion. I use a Targus docking station.
thanks
Heidi
Message was edited by: heidirenken

Hi
This message is meant for developers of third-party Bluetooth adapters, but may appear if you are using such an adapter with the Toshiba Bluetooth software 'stack' -- rather than with the adapter manufacturer's stack. The third-party Bluetooth adapter may work with the Toshiba Bluetooth stack, but only for a 30 day evaluation period.
If you are using an 3rd party Bluetooth adapter, obtain and install the correct Bluetooth stack from the manufacturer of the Bluetooth adapter.
If your notebook was already equipped with the BT card then you dont need to obtain the BT stack version from any other 3rd party manufacturers.
You should be able to download it from the Toshiba page, from your Satellite A200 download area.
I have also received some issues with the Vista Flash cards.
Seems there was a bug in old version. But dont worry; the new version was already released on the Toshiba page!
However, it looks like you have messed the whole OS because the switching to external monitor does not work too. So maybe you should recover the notebook with the Toshiba recovery CD and then update the Vista FlashCard utility.
Good luck

Satellite U305-S7432 freezes and does not respond sometimes using Win XP

Hello.
I have a Satellite U305-S7432 notebook.
Originally it came with Vista but I reformatted with XP Pro. I have installed all updates up to service pack 3.
My problem is that sometimes when I try to restart the computer it simply freezes and does not respond at all to any input. I notice that this happens if I close and later open the lid (meaning that the computer goes input standby mode and comes back).
Please note that the standby mode works perfectly fine and the computer leaves standby fine but afterwards when I try to restart, the computer will simply hang instead of restarting.
If it never enters standby mode, the restart takes place as expected.
I have installed all drivers and there are no question marks in Device Manager. I updated to the latest chipset driver from Intel (for the mobile 965) as well. Lastly, I also tried adding /forceresetreg to my boot.ini (as suggested by: http://support.microsoft.com/kb/822624) but to no avail.
Any ideas?

This is a Toshiba US notebook series and you should check the Toshiba US driver page for available drivers:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
If you will not find the XP drivers at this page then you could try to install some single drivers for Sat U300 from the Toshiba European page but Im not quite sure if such XP drivers will run on you Sat U305. But its worth a try!
Good luck

My keyboard on my 4s will not type the letter p or 0 in vertical/portrait position and the whole bottom row in horizontal sometimes does not respond

My keyboard does not type the letter p or the number 0 in portrait/vertical position. And when I use the horizontal keyboard from time to time all functions on the bottom row do not work at all like the space bar, return key, etc. It has become a bit of a nuisance. I have just installed the 7.1 update but was having this issue prior. I have also had the glass replaced (not by apple) about a year ago with no issues until now. Is there anything I can do? I have not reset all settings. But I really don't want to have to do that because I doubt it will help.

UPDATE
Called HTC... No help, suggested factory reset ,which I didn't mind as I have no data on the phone yet, after reset must call *228 to reprogram. Did not work. Next suggestion, download a keyboard app, the free ones are crap. Why should I have to pay extra to make the device usable? I thought a working keyboard was apart of the initial $200.
On my own I tried *228 option 2 which is some sort of roaming update. That did not work either.

Re: Satellite P845t - keyboard does not respond

Similar Messages

Maybe you are looking for