Re: Satellite Pro A100 - Cannot download the Flash player to watch flash movies

Hi
I am having problems trying to download flash player to my laptop.
It just wont work. So I can't watch any videos.
It is driving me crazy.
I dont' know much about laptops.
I have tried to recover and still no flash player.

Hi
I dont know why you cannot download and install the Flash Player but you should definitely check the Adobe website:
http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash&Lang=engl ish
I have downloaded and installed the flash player from this site and it worked!

Similar Messages

  • Satellite Pro A120 - Cannot get the PCMCIA card to work

    OK i have a problem with my Satellite Pro A120's (xp service pack 2) cardbus.
    I use the cardbus slot to add firewire conections via a IEEE 1394 cardbus card and have been doing this a long time. The other night my comp went into hibernate with the card still in the slot and still in use and when i tried to use it the next day the card was not working at all.
    So i thought the had died on me and brought another one, this one to be exact [http://www.newegg.com/Product/Product.aspx?Item=N82E16839314003] .
    When i plug the new card into the slot windows starts the installation add new hardware thing but does not find the driver, there is none on the provided CD and it does not conect to windows update to find one ethier. So the new card does not work and does not get installed, it just shows up with ! next to pci device.
    I have looked everywhere on the internet to find the driver, read the manual etc.I even did a fresh install of windows so it might find the drivers but nope.
    The only thing i can think of is the slot does not except 32 bit cardbus but in my manual it says this:
    "The computer is equipted with a pc card slot that can accomedate a type II card. Any pc card that meets industry standards can be installed. The slot supports 16 bit pc cards, including pc cards 16 multifunction card and cardbus pc cards. Cardbus supports a new standard of 32 bit pc cards."
    Any help please
    Thanks

    Thanks for your help but i ahve already tried this including searching the net for the driver and no luck. I've also tried microsoft update but no luck.
    The reason i can't find the drivers is because the cardbus card is supposted to be plug and play but windows doesn't have them.
    The good news is i found out my old card was 32-bit just like the new one so my laptop is compatible. I don't want to just go and by another card incase that one won't work.

  • Satellite Pro 4200: Cannot install the correct graphics drivers Win ME

    Hi,
    I have just re-installed Windows ME on the Satellite Pro 4200 machines but I do not seem to be able to install the correct graphics/diplay drivers. Can anyone help
    Thanks
    Steve
    Message was edited by: skc1959

    Hi
    What graphic card was installed in this oldie???
    I dont think that Toshiba provides any Win ME drivers for this unit and therefore you should Google in the internet for graphic driver.
    Good luck

  • Re: Satellite Pro A120 - Cannot access the BIOS and install the Win XP

    Hello
    Ive a Toshiba Satellite Pro A120, Ive installed a Linux operating system on it, and uninstalled it.
    When I come back to the Windows XP OS, I could no more access the Bios (event the i press F1, F2 ) and the computer could not boot the windows XP SP2 CD too but it boots the windows XP 2001 CD
    Any one could help me please

    Thank u jeffrey for your help, ;;;;;or the BIOS i'll try later....for the boot, i tried many times,,,, i screen to shoose the boot appears, and when i select the cd boot it works with the windows xp 2001 SP1, but with windows SP2 it doesn't boot,,,, even though i tried many cds of win sp2 ,,,, so each time , to install windows sp2 , i have to install SP1 then upgrade to SP2 and it takes much more time... i precise that few months ago it was proprly working with the WIN XP SP2 CD
    best regards

  • HT204291 i cannot download the air playit server to my iphone 4s, its a dmg file

    I am unable to download the AirPlAy it server to my iphone, I had no problem doing so on my IPad, however the iphone wont take it, it's a DMG file....

    Iphone does not do DMG files. DMG is a disc image format. The airplay software installs on your PC or Mac and the client software goes on you IOS device. the same file is Universal so both devices.
    IOS install files are IPA and these "different".

  • I cannot download the shockwave player. I need some help. Thanks

    Hi, I have been trying over and over again to download the adobe shockwave player for a class assignment and i have had difficulty in doing this. I have windows 7 and I use firefox. When i go to the adobe website i click on adobe shockwave player and then i click on agree and install now. Then a prompt comes up asking if i want to save the file shockwave installer slim and i click on save file. after that, the shockwave installer slim icon appears on my desktop so i click on it. and the Adobe Shockwave Player Setup runs. after it is finished running the only option that i have is to close the window. so i close it, restart my computer, and shockwave is still not on my computer. I have even deleted cookies, and my history options. I don't know what to do next.

    How do you know that
    shockwave is still not on my computer.
    Did you try the full installer?

  • Satellite Pro A100 - Resume from Sleep with IR multimedia remote control or keyboard

    Hi Guys
    I have dedicated my Satellite Pro A100 to be a media center that sits under the TV and can play networked media and DVD's etc.
    This is using Vista.
    The set up I want is that the lid is shut 24/7 365 and when I want to use it I just press "SLEEP" or power button from the remote control or keyboard and it fires up ready for action.
    POINT TO NOTE. I successfully did this with my OLD Tecra M3. However was too slow for media center and vista
    However I have set the power settings as I want etc, shut lid do nothing, and enabled hybrid sleep (preferred sleep).
    Now I CAN put it to sleep with the multimedia keyboard or remote control. BUT can I wake it?...NO!. I have thought of everything possible....gone to device manager and made sure all the options for the remote and the keyboard and the USB reciever are set to WAKE FROM SLEEP. The only thing to wake it is the power button - which defeats the purpose of it being sat there like a dvd player.
    when awake the remote and the keyboard function fine - I have made sure the batteries are recharged.
    I have the latest BIOS and speaking of BIOS's there are no S3 power options I noticed , but then there werent on the M3 and that worked fine in terms of sleep and waking with the IR.
    I come to the forum because although I know some older systems will not work with vista - IF the M3 will work - I am sure the twice as new and powerful A100 will.
    Has anyone had this before - what have I missed it must be staring me in the face.
    Thanks in advance.
    P.S Also of late the touch pad has been playing up i.e the left and right clickers swap function so one second your working as normal next minute you left click and the right clikc menu appears. Reset BIOS - rebuilt - reinstalled synaptic - no difference.
    When I worked in support for a big company when this started happening it wasnt good news - is it bad news?

    Hi
    Im not quite sure why it doesnt on your Sat Pro A100 and why it works on M3.
    But fact is that Satellite Pro A100 doesnt support the FIR (Fast InfraRed) port and the
    Tecra M3 supports the Fast InfraRed port.
    Maybe this could be the reason why you cannot enable the notebook using the infrared multimedia remote control.
    Greets

  • Does Satellite Pro A100-828 has a 64bit memory interface on X1600 GPU?

    Hi,
    Does Satellite Pro A100-828 has a 64bit memory interface on X1600 GPU? Please help as I only get 2500 marks on 3dMark05 on a Satellite Pro A100-828. The GPU is X1600 with 128MB dedicated memory + 384MB Hypermemory. This card should do around 3500 marks.
    Thanks,
    Shahid

    As far as I know, all cards with ATI Hypermemory or Nvidia Turbocache have 64bit memory interfaces.
    I am unable to gather information on X1600 with 128bit memory width but my A100-828 can run Far Cry on full settings at full resolution. I can also play Oblivion at 'high' settings. Although 3dmark scores are low.
    I have also seen a good increase in 3dmark scores by using an Omega 3.8.330 drivers.

  • Satellite Pro A100 - Flashing battery light and no boot

    Hi
    I was sitting watching a video yesterday with my daughter when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and wouldn't start up again. When I tried to restart the orange battery lit blinked eleven short flashes, and nothing else happened. The battery has been poor for some time, so we always run of the AC adaptor. At present the adapter is plugged in, but there is no blue charging light as I would expect.
    With the battery removed do not get the orange flashes. With the battery in, and no AC adaptor, I do get the orange flashes.
    I wondered if the AC adaptor had gone, and we didn't get a 'low battery' warning because we were watching a video. That would explain the lack of charge indicator. When we get the orange flashes we're getting this from the small amount of residual charge in the battery.
    Can anyone else back this idea up - or anyone who can interpret the error code?
    Thanks
    Keith

    Hi, yes you're correct - no way of starting the machine. Nothing happens when the power switch is pressed, except 11 little orange flashes.
    The adaptor for this model seems to be a slightly unusual type - 19v maybe? I'm on to power adaptor number 4, and am beginning to get tired of buying them! Unlikely I'll be able to find a friend with a similar one.
    I'm veering towards binning the machine and buying a new one - the screen is defective anyway and I'm running off an external VDU, so maybe it's just falling to pieces in stages!
    Keith
    Message was edited by: duotwr

  • I do not know my apple administrator username and password? How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username/password

    I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.

    iOS is only for mobile devices, so:
    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    For Mavericks users:
    http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • Cannot use WLAN connection with my Satellite Pro A100

    Toshiba Satellite Pro A100-830
    Netgear DG834G
    Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'. I do not know what it means and which software controls the connection. I have other laptop which is duly connected by wireless connection. I am ok with wired connection.
    I do not know much about technicalities and thus seek help if any reader can.
    Thanks
    Kris

    >Can not use wireless connection. While using "Config Free" to find wireless device the popup 'this connection is controlled by other software'
    You should not use the ConfigFree for the Wlan configuration but either the own Vista configuration options or the WLan configuration tool like Intel ProSet Utility or Atheros Clint Utility. It depends on the WLan card what utility can be used.
    Intel card -> Intel ProSet Utility; Atheros WLan card -> Atheros Clint Utility
    I assume the message +this connection is controlled by other software+ appears because one of the options mentioned above controls the WLan.

  • Hello- I recently upgraded to OS Mountain Lion on my iMac and cannot download the most current version of Adobe Flash Player.  Please help!

    Hello- I recently upgraded to OS Mountain Lion on my iMac and cannot download the most current version of Adobe Flash Player.  I even uninstalled the old Flash version but this did not resolve the issue.  Could somebody please assist?  Thank you. 

    Hello- I was able to resolve the issue after clicking on the top right hand corner that shows the recent downloads (it has that down arrow).  I realized that I had tried downloading the Adobe Flash Player Install Manager about 7 times, but still needed to click on the file and install!  So I erased all the duplicates and installed one of the Flash Player Install Managers and it finally worked!  Yay!

  • I upgraded MacBook Pro (13-inch, Early 2011) to yosemite. I have no more access to Finder, App Store and some apps. Since I have no access to App Store I cannot download the missing  parts. How can I get access to App Store?

    I upgraded MacBook Pro (13-inch, Early 2011) to yosemite. I have no more access to Finder, App Store and some apps. Since I have no access to App Store I cannot download the missing  parts. How can I get access to App Store?

    Welcome to Apple Support Communities
    What do you mean by having no access to those apps? Can you start up your Mac and work with it, and only some OS X apps do not work?
    Anyway, what you can try is to reinstall OS X. To do this, hold Command and R keys while your Mac is starting up and reinstall OS X. You will not lose any file.

  • Satellite Pro A100 - Where can I find the ethernet controller driver?

    I recently changed my operating system from Vista to XP and I am not able to find a the necessary driver for the ethernet controller in my Satellite Pro A100 PSAAPE.
    Does anyone know where I can get this driver from?
    Thanks!

    Hi!
    You can install the driver if go to device manager and select the Ethernet card. Right click on it and select update driver. Choose the advanced installation where you can choose the driver directory yourself.
    Then you can install the driver! :)
    Bye

  • Bluetooth would not be recognized on Satellite Pro A100

    I have a Satellite Pro A100-828 running Win XP Pro.
    It is supposed to have integrated bluetooth but when I install the bluetooth stack, a message pops up saying usb device has malfunctioned and is not recognized by windows.
    Under Device Manager it is listed as an Unknown Device.
    I've tried different versions of the bluetooth stack but the same message always pops up.
    Is there a software fix for this or does it mean my hardware is faulty? Would be grateful for any advice.
    Thanks.

    Hi,
    where did you downloaded the Bluetooth stack? And another question: did bluetooth ever function properly? Would be interesting.
    Another try could be to download a Linux Live-CD and to check if the problem is maybe more a hardware related issue.
    So if you need a alternative download source then try this address:
    http://209.167.114.38/support/Download/ln_byModel.asp
    Greetings

Maybe you are looking for