Re: Satellite Pro A300-1EA - Difficulties in BIOS update

Hi there,
I attempted to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN) as prompted by Tempro, from version 1.50 to 1.90. The system froze completely during BIOS flash, after waiting for 1 hr, I decided to turn off the power and pray for the best. Thank heavens, everything still works, but the BIOS is still v1.50, not been updated. I have now read so many posts on the forum regarding blotched BIOS update and am now very cautious regarding undergoing any BIOS updates at all.
My questions are: Are there any issues regarding this particular update and/or with the InsydeFlash facility? Are BIOS updates all generally so tricky that they best be avoided? What are the alternative ways to update BIOS, hopefully less dangerous? Also, could there be any potential damage to my laptop related to this miscarried BIOS flash that I should be aware of?
Many thanks indeed!
Monsteress

You can feel you lucky, buddy! :)
Im surprised that your ROM module is not damaged or something else. In most cases this happens if the computer freezes during the update.
Let me give you a word of advice. You should only update the BIOS if its necessary or you have problems/issues with the notebook. You can ignore the messages from TEMPRO if your system runs properly. For example I never update the BIOS if my notebook runs perfect Never touch a running system ;)
Otherwise follow the tips posted by Akuma Before you update the BIOS close all running programs, disable AntiVirus and Firewall and connect the AC/DC adaptor.
On my Satellite U400 I have updated the BIOS without problems.

Similar Messages

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • After v1.90 BIOS update Satellite Pro A300-1EA wont boot up

    I have just upgraded my laptop to the new BIOS as stated in the title but after doing it my computer now wont boot up at all. I just get a blue screen with it asking me to do a CHKDSK because there might be a virus or that the hard drive isn't connected properly (when it is), and it just keeps rebooting.
    It wont start in safe mode either. Anyone else had the same problem and if so, how do I get my laptop back?? :(
    Thanks for any replies.

    Please don't be mad on me but I think you really didn't read users manuals you got with your notebook. There is exactly described how you can have factory settings again.
    So, now you are 100% sure that recovery image is not on the HDD but you don't know how to have factory settings again. Strange.
    Remove battery, connect AC adapter only and disconnect all attached external devices.
    Start your notebook and enter BIOS settings. Set it to default settings and try to start OS again.
    What happen exactly?

  • Satellite Pro A300-1EA webcam not working

    Hi,
    About a month ago my webcam stopped working. I tried various solutions and then formatted my hard drive, installing a 32-bit Windows 7 Home Premium. I still can't get the webcam to work. Could you please advise?
    Kind regards,
    Witek

    reinstall the webcam software which you can find on the Toshiba EU driver page...
    this should fix the issue...

  • Wireless is ON but Satellite Pro A300-1EA says it's OFF

    I have had this computer since April will no problems.
    My wireless is on (on switch and func key) but my computer will not connect to a network, the icon has a red cross through it and when I try and diagose I keep being told to switch wireless on. I have restarted countless times, I have not downloaded any new software or run any updates since the last time it worked. I have checked the device manager, the drivers are up to date and there are no conflicts. I have tried diabling the anti vrius software but this has not helped.
    I am currently connected through an ethnet cable. This has happened once before but after several hours it started working again. No such luck today.
    The connectivity doctor acknowledges that the switch is on - but when I dianose I'm told to switch on the wireless.
    Please help!??

    Hi
    Maybe you should simply reinstall the Wlan driver again. thats definitely worth a try
    Go to device manger and uninstall the WLan driver
    Then reboot the notebook and after windows has booted again, try to install the newest WLan driver. After this procedure reboot the notebook.
    Furthermore go to device manager again and check the Wlan card properties.
    There is a tab called Advanced. There you can find many different options and there could be an option which enables/disables the Wlan card too.
    Last but not least check if there is no conflict between the WLan configuration tools like Atheros WLan configuration and the Windows WLan settings.
    If you are using Atheros Wlan tool then Windows Wlan settings should be disabled (unmarked).

  • Satellite Pro A300-1DZ does not find HDD after BIOS update

    Hi everyone,
    I have recently purchased a secondhand Satellite Pro A300 1DZ.
    Put a fresh copy of Windows xp home on it.
    I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
    OH DEAR what a big mistake.
    Now the netbook will NOT start windows.
    So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
    aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
    Could someone please tell me how to fix this? Thank you x

    Hi
    I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
    This is because of the SATA controller.
    You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
    So, youve got two options if you want to install Win XP:
    AHCI mode -> but you have to include SATA drivers
    Compatible mode -> Win XP installation possible without the SATA drivers

  • Cooling behavior after BIOS Flash - Satellite Pro A300

    Hello everybody,
    I have two laptops, Satellite Pro A300 and Satellite A300. Both have the same configuration, C2D E8300,2GB,ATI 3650 512MB and so on.....
    Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. On the version 3.90 cooling was OK, fan worked only when it was necessary. But now after flashing the BIOS fan works permanently, it does not stop.
    What I did make, in Vista's Power Options under Toshiba Power Saver I changed the Cooling Method from Maximum Performance to Battery Optimized, the cooling reversed to the normal operation, but the cover (keyboard area) became hot a little bit.
    My question is, what is the problem with cooling in the new version (v4.20)? And how to solve this problem?
    Again, problem didn't exist before BIOS flashing and the problem is on both computers.
    Thank you for your help!
    Best regards,
    Osman

    Hi mate
    Thanks for the feedback
    > So what do you recommend me, to stay on Battery Optimized mode? Generally speaking, what's the difference between Maximum Performance and Battery Optimized modes in Power Saver?
    Usually its advisable to use the Battery Optimized mode only when the AC adaptor is not connected to the notebook and the notebook uses only the battery power.
    In such case the notebook does not waste the power using Battery Optimized mode and you could use the notebook much longer using battery only.
    Using Battery Optimized mode the CPU and cooling modules run with lowest performance and the CPU does not create high heat dissipation.
    This leads to a lower internal temperature and lower usage of cooling modules.
    Bye

  • Satellite Pro A300-28V - My bluescreens disappeared when BIOS was upgraded

    I am curious about this. The machine is an Satellite Pro A300-28V with Vista32/Win7.
    Had problems with bluescreen dumps referring to "iaStor.sys". I was just about to send the laptop in for repair when I made this last effort to solve the problem. Upgraded BIOS from 1.9 to 2.1-Win.
    Suddenly my system image succeeded!! Even to an Iomega home network HDD. No hang-ups!
    No bluescreen dumps even at "cold" start-up (after a night off)!
    At the moment I let the computer home in sleeping mode while I am at work. Let's see if it managed a day without dumps.
    What is the technical difference between BIOS 1.9 and 2.1? Any idea if it has anything with iaStor.sys to do?
    /ssstsg
    Spelling was edited by: ssstsg

    Hi mate
    This is really good news that your BSOD displeasured after BIOS update.
    The BIOS give instructions to power-on self test (POST) and provide basic information about how to handle some notebook components, like HDD, ODD, memory which are needed to load the operating system.
    Who knows, what has been changed in the update but the main thing is that everything work and the update solve your BSOD
    >Any idea if it has anything with iaStor.sys to do?
    iaStor.sys is a part of the SATA driver which is need for recognizing the HDD using the AHCI mode.

  • Bios update from 1.60 to 1.70 on Satellite Pro A300

    Satellite Pro A300 got new infromation from Toshiba Tempro that there are new
    bios available. I was downloaded and upgrading bios from 1.60 to 1.70. The problem are
    that machine going totally JAM middle of bios upgrade. InsydeFlash show that bios upgrade
    are going "Erasing and writing" but nothing happened. Machine is totally JAM!
    What I can do now? I have power on machine and not yet rebooted from power key because
    I fraid that bios update is not ready yet.
    PLEASE HELP ASAP!

    Hello
    Please contact nearest authorized service provider and ask for help.
    If BIOS update is not done well the BIOS chip can be damaged and notebook will be death.
    Contact them and explain the situation. They will help you.
    By the way: what do you mean with JAM? Is notebook going OFF in the middle of BIOS update?
    Have you switched it OFF?
    What was happening exactly?

  • Satellite Pro A300 PSAGDE re-booting when plugged in

    I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
    The laptop is a Satellite Pro A300 PSAGDE.
    The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
    I would like to try and flash a replacement BIOS to see if that will solve the problem.
    Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
    Is there any way around this problem?
    Can I fool the software into thinking it is plugged in?
    Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
    Thanks
    Message was edited by: miainphillips
    Message was edited by: miainphillips

    So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
    Right???
    >> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
    If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
    Therefore in my opinion its definitely not a BIOS problem.
    I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
    Disable this by following way:
    1)Control Panel -> System & Security -> System -> click the Advanced system settings
    2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
    3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
    4)Now click OK and restart the unit
    In my opinion the system crashed and therefore the notebook reboots

  • Satellite Pro A300 - shutdown issue

    I have a brand new Satellite Pro A300-15V, which I have downgraded from Vista Business to XP Professional, using the original recovery disc.
    Now I have problem shutting down the computer. When I click "Turn Off" it just shuts down and then restarts after a minute or two. Also, I can't bring it back from hibernation unless I shut it down on the button first.
    Can anyone help, pls?

    Hi guys
    Im not 100% sure if my advice could help you but what you should do is firstly BIOS update to the latest version. Ive noticed that new BIOS were released last week for some A300 notebooks series.
    After the BIOS update disable the WakeUp on LAN settings in the BIOS.
    You could also disable the options like: "Wakeup on keyboard" and "Critical battery WakeUp"
    *@cfrigerio:*
    It seems youve already disabled this function but please check also the LAN card setting in the device manager -> LAn card properties -> Advanced tab.
    There should be an option likes Wakeup on link, Wakeup using APM mode, etc
    Disable these options!
    Furthermore please check if any 3rd party applications dont wakeup the notebook.
    Sometimes the scheduled tasks could be responsible for the irregular waking ups.
    Good luck

  • Cooling fan is not working on Satellite Pro A300

    Hi Everyone
    I was asked by a friend to repair their Satellite Pro A300, as their CPU Cooling Fan had stopped working even during POST bootup and the laptop would overheat and shutdown. So I thought it could one of three things:
    # Fan is clogged with dust or dirt
    # Fan bearing has failed
    # Fan power cable was loose
    So I disassembled the laptop and cleaned the fan/heatsink using compressed air and checked the power connection which was solid, but this did not solve the problem, so I replaced the fan and heatsink with another one that I knew worked from the same model laptop that had a fault motherboard because of the random bios boot-up password bug (out of warranty) but still no joy.
    I am beginning to believe that the fan was perfectly fine rather the motherboards cpu temperature sensor(s) that control the fan activation has failed.
    Am I correct, in thinking that this is basically, irreparable without specialised tools and my friend will have content themselves with turning the system off every hourish or is there something else I am overlooking?
    Thank you, for any help.

    Hello
    Im not a technician but for me it sounds like that fan connector is malfunctioning if you have already replaced the fan and therefore it would be necessary to replace the mainboard
    Thats everything what I can say about this Have a look for second mainboard or notebook where you can get a cheap mainboard. Maybe it works. :)

  • Satellite Pro A300-1H2 - Windows does not recognise HDD

    Hi,
    i'm a newbie, this has probably bin asked before so if it has you'l have to excuse me, i have a satellite pro A300-1h2.
    I got the blue screen unmountable boot volume, so have tried to fit a new samsung drive. I put in my windows disc it loads all the drivers then says there is no hard disc?
    In bios it recognises it ???
    Thanks if anyone can help

    Hi
    The problem is that your notebook supports the HDD SATA controller but the OS system does not contain the SATA drivers
    You could set in BIOS the SATA mode to compatible.
    This will allows you to install the OS without the installation of SATA drivers.
    Greets

  • Satellite Pro A300 - Cursor constantly moves when external mouse connected

    Hi there
    I have a Satellite Pro A300. When I attach a mouse directly by USB the cursor is constantly moving. I also have a mouse attached via a Toshiba docking station and that works perfectly.
    It doesn't matter which USB port I use or whether the laptop is connected to the docking station or not, or whether it is running on mains or battery power.
    I thought it was the mouse that was the problem so I went and bought a new one but the problem is persisting.
    Actually, while I have been writing this post, it has stopped doing it and then started again! Very frustrating.
    Can anyone help?
    Thanks
    Susib

    Hi
    How about the touchpad does the cursor moves and jumps using the touchpad?
    Try to disable the touchpad while using the USB mouse check if you can notice a difference
    How about BIOS?
    Do you have the latest version installed?
    Check this!

  • Satellite Pro A300 PSAG9E. Should I keep it or not?

    Hello
    I have just bought a Toshiba Satellite Pro A300 PSAG9E. It came pre-installed with Vista, and also an upgrade DVD to windows 7 professional (which I have installed).
    I tried starting up the machine this morning, however for some reason it wouldn 't boot. All that happened was that the initial toshiba screen would appear, followed by a frozen black screen (showing an underscore in the top left corner).
    The thing is that I seem to have been able to solve this issue, but I just don't understand how/why this happened!
    The issue seemed to be related to the battery. At first I was trying to boot the laptop (with only the battery connected) however it would not start. I dont think this has anything to do with the amount of charge in the battery, as it did have more than enough in it. I then tried booting it with just the power cable (and no battery). For some reason this seemed to do the trick, and the laptop was able to boot. The laptop now also boots when both battery and cable attached.
    Why is this happening?
    The reason I am interested in finding out, is because this laptop has given me a few problems already. The laptop has also been bought very recently, so I can still return it for a refund (which I am seriously considering!).
    What should I do guys? Any help/advice you could give about this would be very much appreciated.
    Thank you
    Jay

    >All that happened was that the initial toshiba screen would appear, followed by a frozen black screen (showing an underscore in the top left corner).
    The blinking underscore in the left corner means that the BIOS battery was empty or something wrong with the HDD (possibly BIOS didnt find the right booting source)
    I recommend accessing the BIOS and to set it to the default. Save the changes and try to boot the unit again.
    You should also keep the notebook connected to the mains for about 24 hours and the notebook should be ON as well.
    This will help to charge the CMOS battery.
    Check this

Maybe you are looking for