Re: Satellite Pro C870 - No Wireless, Error code 43

Have two new Satellite Pro C870's where the wireless was being disabled every second startup. Wireless NIC in device manager had an exclamation mark and was showing "Windows has stopped this device because it has reported problems. (Code 43)"
After performing a system restore as advised by support the issue was still there.
Just before sending the two laptops off for repair I undid a setting called "fast boot" in the bios (otherwise set using a Toshiba utility).
Issue seems to have cleared after this.

Hi
You are using Win 8. Right?
> Have two new Satellite Pro C870's where the wireless was being disabled every second startup
First of all you should know that Windows 8 does not perform a real shutdown.
It goes just in hybrid mode.
Maybe the error 43 is related to the fact the Win 8 and notebook did not shut down as you expected from a system like Win 7.
If you would search for error code 43 using google, you will get a lot of hits and mostly its system / driver issue.
So first of all I recommend disabling the hybrid mode and performing complete shut down:
+Perform a complete shutdown in Windows 8+
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
secondly try the WLan driver update.
Regarding the other issue
>Also had an issue with the function of turning on when the panel is opened: this would cause the laptop to turn back on immediately after shutting down.
This is also an Windows 8 feature which can be disabled:
+Why does my Windows 8 notebook start automatically when opening the display lid?+
http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm

Similar Messages

Satellite Pro L300 - DVD drive error code 10 on Vista.

Can't see DVD drive on "my computer" Under device manager its showing drive but with yellow triange, after looking at info, the device status is "This device cannot start. (Code 10)" tried restarting 2 times. Thats not working.
Also cheaked drivers, on my computer and internet, windows is saying there up to date and im running the latest.
Tried to uninstall drive and restart thats failed.
When instering a disk the drive does move and spin the disk, so im hoping its a technical issue and doesnt need new drive.
Any help is welcome
thanks

Hi mate
Dont worry it seems its just a registry issue.
First of all remove the CD/DVD drive from the device manager list.
Then go to registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
+HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}+
Details here:
http://support.microsoft.com/kb/270008/en-us
Then reboot the notebook.
Wait until the OS has recognized the CD/DVD drive again and check it.
Greets

On Adobe Acrobat Pro X "I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2"

Using Adobe Acrobat Pro X I received error code 2148073483 when trying to sign my documents. I am using Windows 8.2.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Satellite Pro C870-19D: Windows 10 - BT seems to make problems

Hello,
our Laptop Satellite Pro C870-19D runs fine under Windows 8.1. Now the Windows 10 registration and upgrade advisor tool has been installed automatically by Windows Update and it states that two internal Bluetooth components of this laptop will not be compatible with Windows 10.
Currently no updated Bluetooth driver is available neither via Windows online driver update nor via Toshiba Service Station.
Will there be a driver update in the near future which will ensure the compatibility with Windows 10?
Best regards, Hans-Georg

Hi guys, the Windows 10 isn’t officially released by MS and currently the Windows 10 drivers are not available for any Toshiba notebook.
I think that you will need to wait until Toshiba would start the support of Win 10. I guess this will happen after official release of Win 10.

Satellite Pro A10 - IDE 1# Error on boot up

HI there, i have a Satellite pro A10 and all has been working fine for the last few years until now.
A few days ago i started getting an error reading cd's / dvd's invalid disc format yet the discs work fine on every other pc.
Today i am getting IDE#1 error on boot up... the laptop is still standard from when i got it off the shelf. thinking the drive may have died due to wear and tear i replaced the drive with a working drive and i still get the same error. I have removed the ODD altogether and its still coming up.
I have also updated the bios from usb floppy which was successful. and the best part of all this. the dvd rom that came with the laptop works fine in my other tosh a10!!!!!!
Anyone got any ideas. i don really want to replace the main board if i can help it. this is the only issue with the laptop.
thx in advance people.

Hello James
IDE 1# Error is typical when ODD is not accepted by the system. The reason for that can be defective drive or usage of non-compatible drives. The fact is that every drive can not be used with every notebook model because of different pin assignment.
In your case it is really strange that drive work on other A10 but not on this one. Because of that I presume there is maybe some problem with connectors. I am afraid there is not much to do. You can try to check them and see if they are clean and not oxidized.
Sorry but we can only speculate what the problem can be but, like you know, only intensive test can give you more answers.
Good luck and pleas let us know if you will find out what the problem is.

Satellite Pro A200-16YT - Wireless adapter card upgrade to 802.11n

Satellite Pro is A200-16YT (PSAE1E) with Windows XP Professional SP3.
I have been trying to increase my existing 54 Mb/s wireless network speed by replacing the existing Atheros AR5007-EG 802.11a/b/g with the faster 802.11n adapter.
The Atheros driver is v9.2.0.439 (04/08/2011) which I believe is the latest. I have tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a replacement, but with no success. As well as trying the standard Windows Wireless set-up, I have used the Atheros Client Utility (ACU) which confirms that the card and driver are installed and enabled, but the radio does not switch on, so no there is no association/connection with any wireless network!
Reinstalling the original AR5007 works without any problems. If anyone has experienced similar problems and/or can offer a solution, it would be greatly appreciated. Thanks

Thank you MasterG.
I followed the link you posted and you were correct in suggesting that a WLAN card pin assignment was an issue.
On older cards, (before Revision 1.2 of the PCI Express Mini Card Electromechanical Specification), *Pin 20* was +'reserved for future wireless disable signal (if needed)'+, so presumably on my Toshiba Satellite A200, disabling the old AR2007 card was handled by the system software and the Wireless ON/OFF switch.
On the newer adapter cards, Pin 20 is assigned to a *W_DISABLE#* signal which, when low, will disable the radio.
As suggested by other posts, masking Pin 20 on the AR5008 card has prevented the radio from being disabled, and the only small problem with this is the radio can no longer be switched off with the Wireless ON/OFF switch (or with Function+F8).
However, the wireless speed is now 144.4Mbps, enabling BT Infinity broadband download speeds in excess of 30Mbps.
Your assistance is very much appreciated.

Error installing update in Premiere Pro CC 2014.2, error code U44M1I210

Tried several times to update Premiere Pro CC 2014.2 with the same error code U44M1I210. Tired to contact customer but their site is down.

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Satellite Pro A10 - No wireless adapter not shown in device manager

Can you Help - Toshiba Satellite Pro A10
Model No PSA15E-01PFQ-EN
Serial No Y3602494G
Windows XP Pro
On the front of this laptop is a switch for wireless - this switch is set to On, Windows XP Pro cannot find any wireless device - Windows Device Manager does not show any wireless adater. Can you advice please - do I need to install Driver - Does this laptop support a wireless conection?
Many Thanks
Owen

Hi
Usually if you have a wireless switch your notebook should have a wireless LAN card too. In your case I would try installing the driver. Then the WLAn card should be displayed in device manager properly:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If this doesnt work you can try a BIOS update.
Are you running factory settings or have you installed your own Windows version?

Can't get my Satellite Pro to work wirelessly with internet

I have a Satellite Pro L20- which has wireless network adaptor. Have bought a BT Voyager 2110 Wireless ADSL router. Have plugged router to my Broadband. Have used Toshiba config to find router on my laptop - looks like I then have to drag the laptop icon onto the router but it says I can't do that as the router is being used by another owner?
Should I be doing anyting else - the Inter adaptor card in my laptop says enabled - the router is plugged in - but nothing works.
Please help but am pretty useless on these things so keep it clear
Thanks

Hi
Please be sure that your WLAN card is activated properly. You can check it using FN+F8 key combination or using preinstalled ConfigFree tool. If you are sure that card is activated properly use also Search for wireless devices option (ConfigFree).
Every available WLAN network will be shown there.
I also recommend you to use standard Windows settings for WLAN. Go into WLAN network properties and activate option Use windows to configure my .. After that click on View Wireless networks. All available WLAN will be listed and you can try to connect it. If the WLAN is encrypted be sure that you use the right password.
Bye

X301: Wireless error code 10

Hey
I have just got an X301 and downgraded it to XP using hte supplied downgrade pack. The wireless is not working though. It says This device cannot start (error code 10). I have tried installing all new intell drivers from intel as well as lenovo and it has not fixed the problem. I have tried uninstalling the device adn reinstalling and it also does not work.
Has anyone else had this problem?
Mahcine Type = 2776 - A17
Thanks
Moderator note: Type added to subject line for clarity.
Message Edited by Agotthelf on 22-04-2009 09:08 AM

Hi Tzetz,
You can try booting from LiveCD of Ubuntu, assuming that Ubuntu identifies the device, if it does but the card reader wouldn't work, then it would possibly be hardware issue.
Also, have you run a full diagnostic test on the system via ThinkVantage Toolbox?
I know, reinstalling Windows can be pain in the neck, however it would help in determining if this is software problem or hardware's fault.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Quicktime Pro 7.3 and error code -8961

I'm an absolute newbie to using Quicktime but I went to the apple site last night and after reading a lot of very bad reviews decided to purchase Quicktime Pro 7.3 anyway. I used it successfully to take an mp3 audio file (not from itunes) and transfer it to 16bit 48k which was one of the reasons I purchased the software. It works great. Ironically after the download of Quicktime pro my itunes account would not connect to the itunes store. I don't know if it had anything to do with the download but I searched on other forums and literally found hundreds of users having the same problem. I upgrade itunes to 7.5.0.20 and now everything seems to be working fine.
I do video editing so I want to be able to take an avi file and convert it so I can trasfer it to my ipod (classic 80gb). The avi file is clean and works well on pc 1 (pc 1 doesn't have quicktime on it). I imported the file into pc 2 (pc 2 has Quicktime pro on it). When I went to export the first time nothing happend, it wouldn't work. The second time it said something to the effect that I was missing components or whatever and displayed error code -8961. I figured I needed new or different codec(s). I'm familiar with what codecs are but not how to install them or which ones I need or even where to get them. So I took a chance and downloaded what I believe were various codecs that were listed on a linked page (that apple suggested). Interestingly, after downloading the codecs (I read the descriptions and the two I downloaded seemed like the only possibilities) I tried to play the avi clip again in quicktime pro and this time it played but only the audio portion no video. Any ideas what the problem is and if it can be fixed? I'm sure error code -8961 is at least part of the problem. Thank you. David

You will not lose your key. You only need to re-purchase when upgrading. You are merely updating which is FREE!
On the computer w/no sound, try the following:
Repair permissions & restart.
http://docs.info.apple.com/article.html?artnum=300832 Mac OS X: No audio from certain multimedia content
Trick/Tip: Open up GarageBand if installed then, open a program (optional).
Quit out of the GarageBand app.

Premiere pro failure to install error code 6

trying to install trial of premiere pro on my pc and said install failed error code 6

I posted this same question about 20 minutes ago, them my computer restarted and I don't know how to find my first post.

Mackbook pro 15inch mid 2012 error code 4mem/9/40000000:0x83e32b90

I did the hardware test both short and extended and got the same error code both times: 4mem/9/40000000:0x83e32b90.
what does this mean? I've never dropped my computer and have taken really good care of it and have only had it about a year. also its been getting really hot while running blizzard games (i.e. diablo 3 and world of warcraft.) is that normal? and its been really slow lately taking 3 times as long to start up and to start applications verses when i first got it. any help would be appreciated can't find anything online and id like to know before i take it in to be looked at.
MacBook Pro (15-inch, Mid 2012)
processor:2.6 GHz Intel Core i7
memory:8 GB 1600 MHz DDR3
graphics:NVIDIA GeForce GT 650M 1024 MB

If this is a nonRetina display model, try reseating the memory.
If this is a Retina display model,contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Satellite Pro L300 - Disk Read Error

Hey, Lee here.
I'm currently having problems with my Satellite Pro L300,
Everytime I try and boot it up, it will come up with a 'Disk Read Error, Press CTRL+ALT+DEL to Reboot' this has been happening for a while, and i've tried using the Recovery Console with the 'FIXBOOT' command, but this isn't working, due to the fact that there is no OS installed. I've tried re-installing Windows Vista Ultimate, but it keeps giving me an error. Any help?

To test the hard drive determine what brand of hard drive you have. You can check the Bios/Setup to find out or run SIW or Belarc Advisor. Go to that manufacturer's support site and download their Self Booting Diagnostic CD ISO image, create the CD using the Burn From Image option (see http://iso.snoekonline.com/iso.htm for more information on doing this), then boot to it and run the most exhaustive tests available. If you have a Toshiba drive you will need to use the Hitachi Drive Fitness Test as Toshiba doesn't supply their own. http://www.hitachigst.com/hdd/support/download.htm
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Satellite Pro C855-1TC boot error - backup does not work

Hi
My laptop went curput 2 days after I done a back up.
Came up with an error code: oxc00000f
I tried using the backup disk but ask to delete all on hardisk which i didn't
I have all my photo's etc on there,
I tried all the other options. It says came up were windows is installed the drive is locked and unlock and try again. How do you unlock?
Also the laptop was preinstalled. The laptop didn't come with the disk
How do you find your product key code?
Its not on a label on the laptop. Just Windows 8 home sticker,
Typicaly, warranty run out month before grrr.
I can borrow a friends windows 8 disk but I need my key no so frustrating
Im no techno fob just need advise please.
Thanks amanda

The laptop did not come with any disks because there was a possibility to create own recovery medium (USB or Disk) using the preinstalled software called Toshiba Recovery Medium Creator.
If you dont have such disk, you order this here:
http://backupmedia.toshiba.eu/landing.aspx
Now back to your issue:
Press power button and then F12
Now you should see some bootable devices. Last option is HDD Recovery.
Check if you could recover the notebook using the HDD recovery option.
Regarding the images on your disk.
Well, its possible to remove the HDD and to connect this HDD to another computer using external USB-SATA caddy. This allows you to move the pictures to another computer.
Note: this needs to be done before running the HDD recovery process.

Re: Satellite Pro C870 - No Wireless, Error code 43

Similar Messages

Maybe you are looking for