Re: Sattelite m30-404 graphiccard only standard windows driver

Hi,
I've got a M30-404 and i got problems with the graphic card driver (nvidia GeForceTM FX Go5200).
The graphiccard works fine with the windows standard vga driver but when i install the nvidia driver the screen stay black. somtimes you see the desktop and you can move the mouse for 2 sec then it freezes.
When I switch back to standard vga driver it works.
Got some help?
Cheers

hi beand,
pls download the approbiate driver from the toshiba website
- deinstall in safe mode all video drivers
- reboot
- install the new driver
- reboot
done
*dont* use so called "refernce drivers" for your grafics, use the toshiba one only...
i am sure this will cure the problem.

Similar Messages

  • I wand to install Windows 7 on my band new Macbook Pro 13 inch. Do I need to buy a specific Mac version of Windows 7 or do I install a standard Windows 7 OS on the Mac

    I want to install Windows 7 on my band new Macbook Pro 13 inch and use Parallel Desktop 6 torun it alongside my Mac OS. Do I need to buy a specific Mac version of Windows 7 or do I install a standard Windows 7 OS on the Mac using boot camp.

    As vazandrew said, Boot Camp will work with any standard copy of Win 7.
    The only exception would be if you want to run it in a virtual environment, such as with Parallels or WMware.
    I personally recommend Boot Camp, however, since it only uses the resources for one OS at a time.

  • Since the 4.0.1 update the first Firefox window I open refuses to open tabs, only new windows, and all refuse to show my bookmarks toolbar. All Sync settings and account seem lost.

    Since the update the first Firefox window I open refuses to open tabs, only new windows, and all refuse to show my bookmarks toolbar. All Sync settings and account seem lost.

    G'day again, I've also lost the option of a 'Stop loading' or 'Refresh' button.

  • Firefox does not start in MacOS in 10.6.7. For some reason I cannot create a new profile as recommended (error message Error: Platform version '1.9.2.16' is not compatible with minVersion = 1.9.2.17 maxVersion = 1.9.2.17) further help only for windows

    tried to create new profile using Terminal but error message. cannot open in safe mode, instructions are only for windows All my bookmarks are in firefox

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • HT5628 When i try to install windows 8 on my macbook pro (early 2011) it says that it only supports windows 7?

    When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?

    bootcamp mean dual boot which mean a dual osx install
    virtual machine is installing another operating system as an applications so to speak
    http://en.wikipedia.org/wiki/Virtual_machine

  • MacBook Pro crashed while deleting old backups off partitioned external hard drive. Now only recognizes windows formatted half of drive. Can the Apple side be saved?

    MacBook Pro 15-inch, Mid 2010
    Processor  2.66 GHz Intel Core i7
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce GT 330M 512 MB
    Software  OS X 10.9.5 (13F34)
    I have an external hard drive:
    2 TB Seagate Backup+Desk Media
    Partitioned:
    1TB - Windows NTFS
    1TB - Mac (sorry I can't remember the formatting, whatever Mavricks asked me to use...)
    What happened:
    I was erasing 3 old backups from the Apple partition and my laptop crashed part way through emptying the trash. (it has done this many times before, where parts of the screen are frozen in square blocks displaced all over the screen. Screenshot not possible unless I use a separate camera).
    When I force restarted my computer (holding down the power button) neither side of the drive was accessible. After running the Disk Utility and Verifying and Repairing the Disk Permissions and the Disk Itself (for the Windows side) I was able to access the Windows partition. However, upon attempting to do so with the Mac partition it tells me that it cannot be repaired. I have found many forums discussing SIMILAR situations but none with the same and here is why:
    Up until this happening I could access ONLY the Windows partition when the drive was connected to either my Apple laptop in Bootcamp Windows 7 or my HP laptop in Vista, while my MacBook could access both sides of the drive. HOWEVER, after this crash, BOTH my Windows 7 and Vista can access both sides of the drive (so My files are still all there and accessible) but my MacBook Pro swears that the Apple partition is doomed.
    Since the Apple side of my laptop is my primary workhorse I really want to figure out how to fix my drive.
    So Questions:
    1. Anything else I can provide to the experts out there to help me get this fixed?
    2. Can I custom fix this via accessing the drive on either of the Windows systems?
    3. Why would it suddenly show up in Windows when it became unaccessible to Mac?
    Thanks All!

    UPDATE:
    It has been maybe a month since this happened.
    After I made this post and was checking emails, walking away from computer, and then came back my Mac partition of the External Drive has shown up on the Desktop...
    So, in the ever immortal way of asking the tech to come check the issue and the issue resolving itself, perhaps I should posted on the forum sooner...
    NOTE: The disk still shows up as unusable in the Disk Utility and it appears that the files are read only (cannot make a new folder on this side of the external drive)
    I still consider this a volatile issue because I do not want to lose the files on this half of the partition and I have not gotten a replacement drive yet (too much data to move to my computer and then format the current drive)

  • How do I turn off the tab bar in FF 24 when only one window is open?

    I have just updated to FF 24.0 from FF 20 with Tab Mix Plus already installed. (OSX 10.6.8) From the Firefox Preferences menu, Tabs box, I have set the "Hide the tab bar:" option to "When I have only one tab." I have also gone to the Tab Mix Plus option box and set the drop down to the same value. Unfortunately, it doesn't have the desired effect. Firefox opens to my home page with a tab at the bottom. (I prefer the tabs at the bottom and that setting still works.) With only one page open, that tab is completely unnecessary, takes up space, and just plain bugs me.
    Now, here's what I have found. Once I've started Firefox, if I go to the Tab Mix Plus options box and select "Hide the tab bar: Always" and then set the option back to "When I have only one tab" I can enjoy one page without the tab bar, that is, until I've opened several tabs and then closed all but one. Then I see the tab bar stubbornly remain. An incompatibility between FF and Tab Mix Plus, perhaps. Is FF 24 not letting Tab Mix see the number of open tabs? Dunno. But I can't seem to solve it.

    Are you saying that the problem lies not with Firefox but with Tab Mix Plus? Tab Mix worked up through FF 20 to my knowlege. And I see from other questions that the persistant tab bar was an issue with FF 23 as well.
    Please note, that setting aside the extension issue, the Firefox preference Tab option should turn off the tab option when there is only one window open without any help from addons or extensions. I have disabled Tab Mix Plus, and set the FF option correctly, but the problem remains. As I see it, FF is not working as this user expects it to and is (slightly) broken.

  • Mac OS drives no longer visible, can only boot windows.

    I have 4 internal drives and 1 external drive on my Mac Pro. Three drives are Mac OS, on internal drive is XP, and one is Win 7. At the moment I can only boot from the Windows drives. The Mac drives are not visible from boot camp or at startup holding the option button down. I know the cause, but I dont know how to fix it.
    I caused the problem while booted into Win 7. I was trying to install VS2010 beta 2. The program failed to install, and I found out the problem was that the installer was trying to access the Mac disks. I removed the drive numbers from the 3 Mac disks, and the installation worked. After I relettered the disks I was able to see them from Win 7 (not XP).
    I assume I somehow messed up bootcamp. I have no idea of how to fix this. I would appreciate any help.

    We have a BootCamp forum.
    Do any of the drives show up in Disk Utility?
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    DALE

  • I'm using a 2014 iMac and a Win 8.1 64bit install disc with bootcamp. I created the ISO according to the instructions but when I selected it in bootcamp I got the following error "Boot Camp only supports Windows 7 or later..."

    Bootcamp rejects the ISO file made from a windows 8.1 disc with the error message "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
    How do I get past this?

    Hi Loner T
    No the ISO is just 64bit. I bought a shrink wrapped copy of 8.1 full version. It has two discs, one for 32bit and one for 64bit. I used the 64bit disc.
    I inserted it in an older iMac that has a dvd drive, and shared that across to my new iMac. I used disc utility to create a disc image following instructions I found here...
    Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
    This created an ISO file. I then went into bootcamp but when I tried to use the ISO file to create a boot USB it failed with the error above.
    Regards
    Ian

  • When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

  • MacBook Pro 15" Mid 2012 says only supports Windows 7

    Hi there,
    I have Windows 8 already running on my MacBook Pro 15" Mid 2012 and now I am trying to install the latest drivers. But when I download the drivers via the Boot Camp Assistant it claims my MacBook only supports Windows 7.
    I did the manual download on the Windows side of life, but it fails to install, shortly after hitting setup. I guess, it checks the modell and fails.
    Also, maybe or maybe not, unrelated in the MacBook's about me it claims to be a 13", where as in the system report it shows the correct information.
    Any idea would be appreciated...
    Thanks,
    Thomas

    https://discussions.apple.com/message/21540547#21540547
    projectRelentless has some work arounds that may help here specifically:
    If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature.  Awww man, this far, only to get let down.  Nope.  We are going to fix that.  And this is where ErikVanD's post pointed me to what we do next.
    It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp"  (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this.  Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead.  We tried that remember!  And it gave us the x64 not supported error.  Oh man!  Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that.  Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc.  Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy. 
    Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
    Paste this following code into the new doc
    Windows Registry Editor Version 5.00 
    HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"=""  [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\     00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\    73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\   00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
    Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html  **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it.  Either way, put it on your desktop.
    Now double click the new registry file, and allow/ok it to do its thing. 
    Once done, you can discard the file from your desktop, or keep, your choice.
    Guess What!?  Now we can do the impossible!  Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it.  Because of our new registry entry we placed, we now have an option to "Run as Administrator"  Click that option.
    WooHoo!  We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8
    Boot Camp Support Software 5.0.5033
    http://support.apple.com/downloads/DL1638/en_US/BootCamp5.0.5033.zip

  • Hi there, I've upgraded my Snow Leopard iMac to Yosemite 10.10.1 and would like to install windows 8.1, but bootcamp keeps telling me my mac only supports windows 7. Is there a way I can change that, please?

    Hi there, I've upgraded my Snow Leopard iMac to Yosemite 10.10.1 and I would like to install Windows 8.1 using bootcamp. However, there's a pop-up saying that my Mac is only supporting Windows 7. Is there a way to change that, please? Thanks

    Please find your Mac Model Identifier from About This Mac -> (More Info) -> System Report -> Hardware and compare it to the following list. If your model identifier appears in this list, you can only install Windows 7.

  • HT4410 If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?

    If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?

    Thank you

  • How do I download mac ver upgrade CS5.5 when I only have windows ver?

    I currently have InDesign CS5 on my Windows pc. I have paid for a Mac CS5.5 upgrade version and want to download it on my new Power Mac and remove forever the windows version on the other computer. I know the mac download is going to look for an installed CS5 which there is not. I think there is some way I get the chance to input the serial # manually but don't know for sure. I do not have a CD mac version, only the windows. If it came with both, I honestly don't know where the disk is. All my software is registered and shows up in My Account and I know I can legally swap platforms once, just don't know the procedure here and was hoping not to have to spend hours on the phone with Adobe.
    Thanks.

    I didn't have to return anything because it was a download from Adobe store. For those of you who ever get in this situation, it is an easy fix made more difficult by having to spend close to an hour, or more, with customer service. If you have a product on a mac or pc and want to download a version onto an alternate platform -- mac to pc or pc to mac -- they call it "swapping platforms" and they allow you to do this once without charge. When you start the installation you will get to a point where it says you don't have a recognized version on your computer. At that point, you have to be online with customer service because they will give you the instructions and codes to enter to bypass that and finish the installation. You will also have to fill out a form online while you are doing all this that states you will no longer use the previously installed version.
    This swap works for simply transferring the same version from one platform to another, or if you are upgrading at the time you are switching back to a MAC -- Yayyyy!

  • HT5634 Late 2013 Macbook Pro Retina only support Windows 7 (Trying to install 8.1)

    I have a 15 inch Macbook Pro Retina (Late 2013) trying to install Windows 8.1 (64-bit) via Boot Camp on USB with an ISO. Upon downloading Windows support software, I'm greeted with a pop-up that says: "This Mac only supports Windows 7, do you want to continue?" However, upon further investigation, according to Apple's website, it says my model is officially supported for Windows 8.1 What's going on here?
    Boot Camp: Version 5.1.2 (481)
    OSX Version: 10.9.2
    Thanks!
    -Sterling

    I am new to the community as well but have been an apple genuis for a while.  The way I put windows on my mac (late 2012 pro) last year was I bought windows 7, and used bootcamp to install it.  I would have someone at best buy or a tech store do it for you though. If you dont want to pay $200 for windows 7, you can just buy an app called parallels (also at like a best buy) and use that.  I believe it is around $75 but not sure.  Hope this helps

Maybe you are looking for