Re: Screen powers off every 15min on sp10-304
Can anyone help, the screen powers off every 15mins, but the power option is set to never.
I cant access Windows power options where it is set to power off after 15mins
Mick
Its Satellite Pro, when I try to access Windows power option it goes blank so you cant choose an option and wont let you change any options in power options properties, very odd never had this before
Mick
Similar Messages
-
My ht-ct80 sound bar keeps turning itself off every 15min.
4 days ago I bought a htct80 sound bar and it keeps turning itself off every 15min. I serched the internet for a solution to no avail. So I need a answer from sony. Its a great sound bar while its on. Please give me a solution or i will have to take it back for a refund this weekend. If anyone else is having this ptoblem. And i know there are many please reply to this post. The more that reply the more likely we will get a rwsponse from sony.
Hello everyone,
The Sound Bar turning off every 15minutes is related to the Auto Standby function due to the Sound Bar not receiving an input signal. Unfortunately, there are two conditions where the sound bar will recieve a low input signal that results in the Auto Standby triggering incorrectly.
The first case is when the TV’s headphone jack serves as an audio output jack. This is not a recommended method for Audio Input for the Soundbar. If you are using this method, check the TV’s audio output settings. For details, refer to the TV’s operating instructions. If you can not change audio output setting, set up TV volume which is strong enough to prevent it from entering Standby mode.
The second case is when you are using a set-top box (Cable box) that has a volume setting. You can either change the Audio Settings on the set-top box for Fixed Audio Out (if available) or increase the volume on the set top box(Cable box) to maximum setting and then adjust the volume on the Sound Bar itself to obtain the desired actual volume.
Thank you,
---Chris -
Screen shots off every few minutes after upgrade to 10.6.3
After upgrading to 10.6.3 my screen shots off every few (ca. 5) minutes when I hit either the mouse button or any key. The screen comes back by itself after about 2 minutes, the rest of the iMac continues to work (print jobs finalize, keybaord entries are recognized etc.).
Is this a known problem of 10.6.3 or is it just coincidence and simple a HW problem?Try giving more details...was it any specific key; did you click the mouse in any place in particular? Was the mouse cursor in a corner of the screen (Hot Corners)?
You can try a Hardware Test to see if it actually is hardware-related. But if you've not seen it before, that's unlikely.
If you can't fix it, you can try to re-install 10.6.3 from the Combo update. -
HT1349 Screen iPad (original) will not rotate. Stays in portrait screen? Have powered off and on.
iPad original, screen will not rotate. Tried powering off. Stays in portrait screen.
The side switch is the key. Depending on your settings, it may affect the mute or it may affect the rotation lock. This support article from Apple provides detail.
http://support.apple.com/kb/HT4085
In case you're wondering, here is the history. Originally, the mechanical switch affected only the rotation lock and the mute was a software switch elsewhere. In IOS-3, it was changed to be the mute switch and the rotation lock became a software switch. This was done to ensure consistency among IOS devices. Unfortunately, a large quantity of users complained loudly, alleging that they turned the rotation lock on and off several times every hour and the convenience of the mechanical switch is essential. In IOS-4, Apple bowed to the whiners and made the switch function selectable and now we're stuck with a mess.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?
Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.
-
Toshiba 32AV615DB screen flickers off for a split sec every few sec
Hello,
I got my toshiba television around the end of 2009 and havent had any problems until recently.
Whilst watching my virgin + box and whilst on the gaming console, the screen flickers off for a split second every few seconds.
At first I thought it was me blinking it happens that fast until somebody else noticed it as well.
This does not happen whilst using the tele for a monitor for my PC.
Does anybody know what the problem is and if I am able to fix it or not?
I purchased the tele from RicherSOunds with a 5 year garuntee so if it is anything bad I can take it back and they will fix it or give me a new one free of charge.
Thanks in advance for any help.Hi
If the warranty is still valid, I would recommend you to contact the technician (service point) in your country in order to check the TV.
Everything what you can do is to check some settings and cable connection but thats it.
TV troubleshooting is limited and in most cases such issues need an check from experts. -
My iPhone 3GS keeps powering off at any point when between 5 and 50% battery remains.
I could be in the middle of texting, receiving a call or using an app when all of a sudden the screen goes black and very faint randomly distributed lines are visible from the top of the screen to the bottom. The display looks a little like a barcode. I am then unable to restart the phone without plugging it into a power supply. I've looked on the Internet and cannot find a similair case.
It is so frustrating and I am continually thinking it will crash at any point.
Any help or suggestions would be very much appreciated.
ThanksWhen the "white symbol" is the white Apple logo, it is starting up....
Can take some time. -
My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?
My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?
-
Why does the iphone allow itself to be powered off while the screen is locked?
Why does the iphone allow itself to be powered off whlie in the lock screen? This makes it impossible to track if stolen does it not? Seems like an assinine concept!
It does, but there's little we regular mortals can do about it. However, you now have something to contribute to Apple via the Feedback Link!
-
I have a new iphone5. I have it poweredoff and plugged into the wall, but I am not getting any charging icon. Any ideas?.. Bill Steed
You will not get anything on the screen as your iphone is powered off.
Ideas for what? -
Exported a 3 minute video from iMovie into Quicktime, saved to desktop. System started saving INDIVIDUAL frames instead and entire system froze. Powered off and on twice - screensaver appears, but that's it - nothing else is accessible
Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then reboot as usual. -
After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.
Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US. -
Installed Mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full -recovery mode says mac and receovery HDs locked - verify disk says - recovery ok - repair says no live support?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
TS1367 grey screen displayed at startup then powers off
When I turn on my Mac a grey loading screen is displayed but then it powers off. I want to turn it on or figure out a way to bypass this without losing anything saved on the computer.
Hey taylorkl,
Thanks for the question. After reviewing your post, it sounds like the Mac is not fully starting up. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Mac OS X: Gray screen appears during startup - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
The powering off screen has been up for 10 minutes
What am i suppose to do when the powering off screen has been up for 10 minutes?
If what Illaass's instruction didn't work, attempt these instructions;
To do a recovery mode restore, follow instructions as follows:
-Connect cable to computer but not device
-Open iTunes on computer
-Power off device
-Hold circle (Home) button
-continue to hold the power button while connecting the cable
-continue holding after cable is connected, until you receive a notice in iTunes that says;
"iTunes has detected an ipod in recovery mode, you need to restore the device before it can be used with iTuens"
-Click ok to this message
-click restore and wait for the restore to complete
Maybe you are looking for
-
'email video' doesn't work on iPad 2; please help
I am unable to email video recorded on my iPad 2. I used to be able to, but in the last couple of days it has not been working. The 'email video' selection does show up and after I tap it, nothing happens. That is, the popup window to allow me to
-
How to encode 4 channel mxf file to 4 channel mov file
I want to encode a 4-channel IMX 50 mxf file to an 4 channel imx50 mov file. We use the mxf import plugin for reading mxf files. Which audiosettings do I need to use to create a 4-channel mov file. Everything I do results in a 2 channel file.
-
I've just finished projects with a bit of animation and some branching that I facilitated with additional buttons and duplication. Published for the web it works perfectly. My instructor (I am a student with a co op in elearning) has asked for an .ex
-
My Sony HVR-A1U and Final Cut Express HD 3.5
I just recently purchased both of these products and I am having the hardest time trying to get the captures to last longer than five seconds without the picture being dropped because of the frame rate or something at the bottom that says that it can
-
Hi, We are using one standard BSP application. we run the application from the portal . If we logoff from the Portal by clicking on the "Log Off' button it is unlocking all the underlying database. But when we close the application by clicking on C