Re: Screen template change for QM Notification

Hi All,
I am trying to make some changes in the screen template for the notification screen for F2 notification type.
On creating a new Notification by copying from the std. F2 type, When I try to see the details in the Item tab at the header for the Overview Sub-Tab, I am fing Greyed code group option which is not similar to the standard F2 notification.
Please advice how to go for this.
Regards,
Vivek

Hello Vivek,
first of all I agree with my precessor that the standard settings for the notification are not copied when you create a notification type from an existent notification type.
In this case you have to go through all customizing steps in QCC2
Once this has been done you can then change the appearence of your notification.
If you want to add your own additional subscreens you should look at the exit QQMA0001 or QQMA0008.
I hope this information proves useful
regards
Isabelle

Similar Messages

  • Remembering Template Changes for second page

    I have adapted the San Fransisco Letter template to suit my own needs, copying my own logo, and updating the address details. I have then saved the new template, and it appears in My Templates - so far so good! I have noticed though that when I go to a second page in my letter, the original San Fransisco Template appears - with the incorrect logo and address. Am I missing something? Is there a way for my Template changes to carry over to the second page? Thank you very much.

    Gwyn,
    Okay, now we're getting somewhere. The address area you're referring to is already defined as a master object. Here's what I did: I put my own address in that object, moved my cursor to the end of the page, then added a page break. Like your situation, the master object repeated on the next page (as a master object will), but it repeated with template information, and not the address I put in. That's what's happening to you. So I started over. I put in my address, moved my cursor to the end of the page, but instead of adding a page break, I added a section break -- voilá. It worked.
    What confused me for so long is that master objects usually just look for a page break in order to repeat. For some reason, yours is looking for a section break. Go figure. Anyway, now we know how to fix it. Good luck.
    -Dennis

  • Screen layout changes for PO

    Hi expert
    In the document type i have  change the screen layout to MBF from copying NBF, but i am not getting   effect of changes which i had made for MBF..
    Regard
    Nabil

    HI,
    There are up to six different field selection keys.
    Eg: 1. Field selection key: transaction
          2. Field selection key: activity type
          3. Field selection key: purchasing document type
          4. Field selection key: item category/document category
    The successive combination of the field selection keys listed above decides which input characteristics the fields have in the document.So not only MBF, it is the combination of the setting that determines the field layout.
    + For mandatory fields
    . For optional fields
    For display fields
    - For suppressed fields
    the strongest is suppresed, then display, then mandatory and last is optional.
    ie , for eg combine fld sel key 1=  suppressed and fld sel key 2 = mandatory, result is field is suppressed. Similarly , ther final result after combining the settings determine the field status.
    Regards
    Aloysius

  • Formatting change for email notifications

    Hi All,
    Running SP8 Portal and i am modifying the com.sap.security.core.util.notification.notificationTexts_en.properties file where i want to bold and use italics.  What is the code for bold and italics?
    Thanks

    Nobody from Apple is here to read your request. You need to go here:
    http://www.apple.com/feedback/iphone.html

  • Automatic Screen Resolution Changes?

    I have a Retina MBP 15".  When I use Mail or Safari, I like the setting set to "Best (Retina)", but when I use Photoshop, FCP or other media based apps, I like to change it my screen resolution to Scaled: "More Space".
    Is there a way (in Automator or something else) to have the MBP trigger screen resoultion changes for certain apps? and then return it to the default upon quitting that application?
    Thanks

    Hello anitagold:
                Welcome to HP's forum. Thank you for visiting us how ever you are on the wrong forum. You own a business Touchsmart witch has a total different operating system then home user's does. This section is for home user Touchsmarts. This is where you need to post http://h30499.www3.hp.com/ You will receive a much accurate respounce I also think they have live chat assistance as well during business hours on line as well. Your software is also different then ours is so it would not do you any good for me to give you direction on how to adjust your screen resolution. Because your computer even though they look a like on the outside they are not alike inside. Thank you frrw.

  • Building out a template for email notifications

    I am working on an email template for emails Managers will receive when someone submits an Urgent Change Control. I am struggling with the some of the fields in the Change Request getting them into the email to the Managers. I want to include as much information
    about the Change Request as I can so they can Approve or Reject from the email by replying to the Service Manager mailbox, and do not have to use the Console to see the details.
    I am in the Templates node under Administration --> Notifications
    Below is just a sample of my template so you can see what I am doing.
    Message body
    Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
    SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
    approval.
    You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
    Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
    Title:
    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
    Change Request Description:
    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Description$
    Start and End dates:
    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/ScheduledStartDate$
    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/ScheduledEndDate$
    Now I can include things like the Title of the Change Request, The Description and Start and End Dates but I would like to add other fields such as:
    On the Planning tab
    Implementation Plan
    Risk Assessment Plan
    Test Plan
    Back out Plan
    When I click on Insert in the template builder, I get a list of items I can select. I have been experimenting with all different selections and nothing seems to work. Is it even possible to capture these fields in a Change Request into an email. I have done
    things like copy the text from fields that do work like "Title" and then replaced /Title$ with something like /Backoutplan$ but that doesn't work.

    Yes, it's possible. I have no idea if it can be done with the out of the box notification template wizard, though..
    You're interested in the change request class, not the work item class. The CR class inherits from the WI class, but the properties you want are defined on the CR class. Therefore, the relationship paths you're using need to be restricted to the CR class
    via the Type Constraint. To get the CR's implementation plan property, for example:
    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CRLib!System.WorkItem.ChangeRequest']/Property[Type='CRLib!System.WorkItem.ChangeRequest']/ImplementationPlan$
    The trick is making sure the CRLib reference exists in your management pack. CRLib is just an alias for the System.WorkItem.ChangeRequest.Library management pack reference.
    So, when you update your notification template, export the management pack that it's defined in and make sure you add that reference. Re-import the MP and test the notification.

  • Need workflow config step by step for PM Notification change status

    Hi All,
    as per our requirement we need to trigger workflow when PM Notification Status will be change (Event will trigger for approval when sombody manually change the workflow status)
    Kindly guide me step by step for configuration of that

    try to do like this
    1. Find a Enhancement spot for the Txn IW22 and check whether that enhancement is getting executed while trying to change the PM notification.
    2.once you are sure that the user exit is getting executed then by using the FM SAP_WAPI_START_WORKFLOW trigger the workflow by passing the workflow template to the FM...
    3. But before doing the second point develop the workflow template and make sure you have create a Z bor to implement your own logic.. or find a standard BOR which has the event CHANGED and if at all you have any standard BOR then use that BOR's event , I mean rasie the event CHNAGE from the user exit you found by using the FM SAP_WAPI_CREATE_EVENT

  • Confirmation of receipt for PM notification layout change ?

    Hello
    Can somebody tell me how I can change the printing layout of the confirmation of receipt document in the action box for PM notifications? I couldn't find any way to do this in customizing.

    Dear Milos,
    The form being used in the case is QM_REPLY is default. You may ask your ABAPer to modify this form as per your requirement.
    Also there are other default forms like QM_NOTIF_OVERVW1 etc.. (Around 8 to 10 standard forms are provided by SAP).
    Choose the one required and get it edited.
    Regards,
    MLN Prasad

  • Infotype screen headers needs to be changed for all the infotypes

    Hi Guys,
    This would be for a global implementation question.
    For the US for a particular region, the screen header needs to be changed for all the infotypes.
    The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
    The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
    When i go to Table T588J to add an entry , Screen Header 42......,
    I get an error " No Field STAT2 exists for infotype 0001"
    No field STAT2 exists for infotype 0001.
    Message no. PG811
    Diagnosis
    No STAT2 field exists for infotype 0001.
    Procedure
    Please contact your system administrator.
    Procedure for System Administration
    In Customizing, determine the incorrect entry in Personnel
    Administration in the Header structure per infotype view, step " Determine infotype header and correct it
    I would like to have some inputs from you guys ..... Any Suggessions...
    Thanks,
    Aastha

    Hi Aastha,
    Correct me if I am wrong.
    First you need to maintain the header in T588J.
    Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
    Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
    For example like
    Screen Header / Tr. Class / Header modifier
    00                    /        A      /  60
    In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
    Hope this is useful.
    Regards
    RK

  • Digital Signature for QM notification status change

    Hello experts,
    I need your guidance regarding implementation of user digital signature for QM notification status change. Our customer has ECC 6.0 but they are not inclined to introduce enhancement package 3 soon. Now their requirement is that while QM notification status change they want to have a user signature pop-up to verify the user authorization to do so. But they don't want to do so by using digital signature via DMS status change.
    I am really not sure if I have explained the situaion correctly or not as i am quite new to QM. But I am desparately looking forward to get your valued replies in this regard.
    Best regards,
    Anirban

    To fulfill the FDA requirement we have apply the logic to make sure that a digital signature is captured for status changes during task processing.
    To map this requirement we have developed one custom table to store remark that will be displayed on digital signature remarks textbox. This table will have following feild:
    STAT - System/ user status
    QMART - QN type
    SPARS - language
    TEXT - character text.
    Work with ABAPer to implement this, and after implementing validate following key point:
    u2022     Validate that after successful digital signature that the signature cannot be overwritten.
    u2022     Validate the locking of the User ID after customer specific number of unsuccessful signature attempts.
    u2022     Verify that the digital signature works for each status.
    u2022     Validate that if the digital signature is cancelled prior to successful entry that the system status reverts back to previous status and all processing authorizations allowed for that status still function properly.
    Hope my reply will help you.
    Thanks!!!

  • Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    I bought Iphone Only for full screen contact image
    Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
    I don't believe you...
    Please make changes for contact image for for full screen
    Tell Apple: http://www.apple.com/feedback/

  • Screen change for DV4-1318TU

    Hi,
    Can i change my DV4-1318TU LCD screen to Full HD LED backlit screen?
    Thanks for the reply.
    Regards,
    Anup

    anuair wrote:
    Hi,
    Can i change my DV4-1318TU LCD screen to Full HD LED backlit screen?
    Thanks for the reply.
    Regards,
    Anup
    No. The connectors to the motherboard are different.  That means the motherboards are different as well.
    The LED Backlit displays are for the newer Entertainment series models. 
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I can't search for apps by pulling down on the home screen. Today view in Notification Center is turned off, but today view comes up when I pull down, not Spotlight Search.

    I can't search for apps by pulling down on the home screen. Today view in Notification Center is turned off, but today view comes up when I pull down, not Spotlight Search.

    Pull down starting in the middle of the home page, not at the top.

  • I have the ESPN ScoreCenter app on my iPhone 4S and since I installed iOS7 I am no longer receiving alerts for my teams.  I have not changed anything else, Notifications is on all my team alerts are on.

    I have the ESPN ScoreCenter app on my iPhone 4S and since I installed iOS7 I am no longer receiving alerts for my teams.  I have not changed anything else, Notifications is on, all my team alerts are on.

    Wow, just posting and it seems that there is a solution that is working for me...
    What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

  • IW21 Classification screen structurre for extended view for a notification type

    Hi Guru's,
    In Spro I added a screen structurre for extended view for a notification type
    I have well the subscreen now but the labels are missing and the button classification doesn't work.
    I guess that I should implement an user-exit or a badi.
    Any idea please ?
    Regards,
    Rahhaoui

    See this picture  This is from the same thread I referred earlier. I feel there should be better ways of learning these fundamentals about Module-pool programming, rahhaoui !
    Best of luck
    Jogeswara Rao K

Maybe you are looking for