Re: SD reader - did not work with 8gb card

Hi, how can I read my Micro SD (with SD adapter) - (8gb SDHC), my PC didnt see this card. If I plug my 2gb micro SD is all ok. Is problem with SDHC? or capacity 8gb?)
Thanks
[email protected]

Hi
I dont know what notebook you have but did you check the user manual? There you can find a list what types of SD cards are supported.
Check this!!!
Some notebooks can only read SD cards but not SDHC cards.

Similar Messages

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

Adobe reader will not work with games

adobe reader will not work with games

That is correct. Adobe Reader is intended for viewing PDF files, not for playing games. Perhaps you are thinking of Adobe Flash Player?

Mainboard is not working with any cards except mine(GeForce2 MX400)!

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...

Quote
Originally posted by volkankarakus
Hi this is my PSU model and spesifications
SOLARMAX
Model:KC300 ATX
Input 115V/230V AC 50/60
Output 300W Max
+5V 20A +3,3V
+12V 12A -12V
+5VSB 1,5A -5V
Thanks!
Weak PSU is all I could say. 300watts can't even support a P4 stablely, not even to talk about combining a P4 to any new VGA cards... Get a better 400watts or more PSU with +3.3v at @ least 26A, +5v at @ least 35A and +12v at @ least 18A.

ADOBE READER XI not working with HPT1200 Plotter

I recently update staff computers to use the Adboe Reader XI. Now they can not print to the plotter in our office.They can pront the same pdf file to all other printer/plotters but not the HPT1200. I uninstalled Adobe XI and re installed Adobe X. and it works. What do I have to do to get Adobe Reader XI to work with our color plotter?

Have you updated the HP print drivers for that plotter?

Update panel did not work with ajax control toolkits

hye there, can anybody helps me about the update panel. I have a grid view that must show the file that i already browser. in my situation i am using Ajax control toolkit so it automatically will upload the file in the grid view. Unfortunately it did not
work but the other code is work. this is my code
function clearContents() {
var AsyncFileUpload = $get("<%=MemoFileUpload.ClientID%>");
var AsyncFileUpload = $get("<%=AttorneyFileUplod.ClientID%>");
var AsyncFileUpload = $get("<%=TORFileUpload.ClientID%>");
var txts = AsyncFileUpload.getElementsByTagName("input");
for (var i = 0; i < txts.length; i++) {
if ((txts[i].type == "file") || (txts[i].type == 'text')) {
txts[i].value = "";
txts[i].style.backgroundColor = "transparent";
if (txts[i].type == 'text') {
txts[i].value = '';
function uploadComplete1(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton.UniqueID %>", "");
function uploadComplete2(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton2.UniqueID %>", "");
//the code that works
<td>
<%-- <asp:FileUpload
ID="MemoFileUpload" runat="server" Height="25px" Width="275px" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete1" runat="server" ID="MemoFileUpload"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader"
OnUploadedComplete="btnMemoUplod_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button runat="server"
ID="HiddenButton" Style="display: none;" />
<asp:Image ID="imgLoader"
runat="server" ImageUrl="../Images/loader.gif" /> 
 
<img id="imgDisplay"
alt="" src="" style="display: none" />
</td>
<td align="right">
<asp:Button ID="btnMemoUplod"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnMemoUplod %>" Visible="false" />
<%--CssClass="ButtonStyle"--%>
</td>
<asp:UpdatePanel ID="update1"
runat="server" UpdateMode="Always">
<Triggers>
<asp:PostBackTrigger
ControlID="btnMemoUplod" />
<%--<asp:PostBackTrigger
ControlID="GridInspection" />--%>
<%--
<asp:AsyncPostBackTrigger ControlID="btnMemoUplod" EventName="Click" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</tr>
//the code that did not work
<td>
<%--<asp:FileUpload
ID="AttorneyFileUplod" runat="server" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete2" runat="server" ID="AttorneyFileUplod"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader1"
OnUploadedComplete="btnAttrnyUpload_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button
runat="server" ID="HiddenButton2" Style="display: none;" />
<asp:Image ID="imgLoader1"
runat="server" ImageUrl="../Images/loader.gif" />
</td>
<td align="right">
<asp:Button ID="btnAttrnyUpload"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnAttrnyUpload %>" visible ="false" />
<%--CssClass="ButtonStyle"--%>
<asp:UpdatePanel
ID="Update2" runat="server" UpdateMode="Conditional">
<Triggers>
<asp:PostBackTrigger ControlID="btnAttrnyUpload" />
<%--<asp:PostBackTrigger ControlID="grdAttorny" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</td>
</tr>

Hi,
For ASP.NET problem, please post in ASP.NET forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks MSDN Community Support Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

C3 did not work with all the types of routers

Hi!
My problem is with the C3 (Hungarian 03.36 Vodafone), that the e-mail program is not working with all the wlan routers. My home router is Asus WL-520GC and with it I get communication error, but with a Linksys or a Tplink router everything is good. How can it be?
(I ve heard it from outhers too)
(both WPA2personal and DHCP)
I tried it with factory settings, but same problem: communication error.
Pls help!

Solved: I had to upgrade the firmware of the router.
It works

I m in from bangladesh 7days ago I bought an iphone 4 but not work with sim card. no service.

7days ago I bought an iphone4 from my friend Mithu who come from Singapore.
He told me he that after 7days he come dhaka and open my iphone by using sim. but 4days ago he died on road accident.
He didn't give me any documents & I also knocking his family for that but said they didn't know about iphone. but i cut a sim & insert it in my iphone but showing no service, some time no sim.
How can I work with my iphone,
plz plz plz advise me. I hv not enough money to buy another one,
Plz help me remembering steve jobs.
Version------- 4.2.1(8C148).
Carrier Lab 9.0
Model MC603B.
Serial---8602613MA4S

The iPhone 4 may not work with a cut down SIM. Get a microSIM from your carrier when you set up service.

Flex 14 SD card reader not working with larger cards on Windows 8.1

The card reader in my Flex 14 is behaving very oddly. When I insert a 16GB SDHC card it makes the 'USB inserted' noise and the card shows up under device manager but I can't access it through file explorer. The card reader works fine with smaller SD cards that I have. I tried the card in another, Win7 laptop and it worked fine.
I see a number of other people are having a similar problem and I have followed all of the troubleshooting advice I can find, but nothing is working. Does anyone have any other suggestions?
This is what I have tried:
1. Leaving the card in the camera and attaching the camera via USB cable to the laptop: same result, noise, but can't access the card.
2. Trying to reassign the drive letter through storage controller: it shows the card but if you right click it to assign it a drive letter it says the 'file is missing'.
3. Downloaded the Win8.1 x64 driver from Lenovo website and installed. This stopped the card being recognised at all.
4. Installed the Win8 xc4 driver: this got me back to the noise but no action stage.
5. Updated Windows.
6. Uninstalled and reinstalled the driver numerous times both with the card inserted and without it and with restarting the computer after unistall and after reinstall.
7. Ran Ubunutu from a live USB: This allowed me to see the card and copy its contents to the laptop's HDD.
So it seems to be some incompatibility between the Lenovo drivers and Win8.1. Potentially it's to do with the USB drivers rather than the card reader drivers as the result when using the USB cable and the camera was the same as putting the card in the card reader. Is there a way to update these?
Any other troubleshooting steps I could take?
Thanks.

What size are the cards?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

Adobe Reader 10 not working with Mac OS 10.6.7 browser

After upgrading to Mac OS 10.6.7, Adobe Reader 10 will not download a pdf file properly from either Safari or Firefox. In either browser, the resulting page is totally blank. Downloading older versions of Adobe Reader has not resolved the issue. Outside of any connection with a browser, Adobe Reader 10 works flawlessly as a free standing program. Would be grateful for any assistance.

For everyone having the problem:
Highlight one of your .pdf documents. Hit Command + I on the keyboard for the "get info" window to open up.
Check to see what the "Open with" shows. If it is not Preview, choose Preview. You may have to click on the little lock in the bottom right corner first to unlock it and enter your admin password. When done, click the little lock to close it. Close the window. Restart computer. Try a .pdf now to see if it works.

E1200 - did not work with my computer

I tried to hook it up, called tech support and was on the phone with them for more than half an hour worked for a while then stopped. I gave up and sent it back Amazon.com was great to work with

Eventually Router should work... What was the exact concern that you were facing with the router ? How you were configuring the Router, was it with the help of the Cisco Connect Software or you were doing manual setup ?

NETSCAPE 7.1 did not work with 2.0 Object Browser

If I use Object browser I can select table, view, sequence...
but nothing is shown. I tested on htmldb.oracle.com
All works fine with IE, ...
Query Builder works with Netscape

Hi Lutz,
Netscape 7.2 or higher is required.
Joel

Re: SD reader - did not work with 8gb card

Similar Messages

Maybe you are looking for