Re-setting print cart. alignment - how do I?

I have an old Lexmark Z32 printer which doesn't work too well under 10.5 but it was working. That is until I changed print cartridges. Now it won't print because it says the cartridges need alignment, which I'm sure they probably do BUT this is not critical and I just need some basic stuff to print.
Is there anyway to get in to the OS and just re-set that telling the print dialog they cartridges are aligned? I don't mind using terminal if that is what it takes, just don't know where to go.

I am guessing that the alignment message appears while trying to print. If so, have you use the Lexmark Utility to see if that will realign the cartridges? It should be located in one of the folders in /Library/Printers/Lexmark - it seems they are usually with the folder for the driver for USB printers but not always. The utility is also accessible from the printer proxy.
Hope this helps.

Similar Messages

How to set printer margins if using a lot of printers in virtual desktops which are deleted each time users logs off

Hello,
i am using Firefox version 31. I have a problem with page setup margins. I need to use left
30mm; right 10mm; top 20mm; bottom 20mm. I am using VMware floating assignemnt linked clones
virtual desktops. After users log off - machines are deleted and users next time logs on get's brand
new VDI's. Users gets printers to VDI using login script from Active Directory.
Option Explicit
Dim strPrinterUNC, objNetwork
strPrinterUNC = "\\some_server\printer_number_1"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.AddWindowsPrinterConnection strPrinterUNC
WScript.Sleep (20000)
objNetwork.SetDefaultPrinter strPrinterUNC
Set objNetwork = Nothing
Each user have different logon script, because they use different printers (different printer names e.g. \\some_server\printer_number_2 ; \\some_server\printer_number_3 and etc. Page setup margins in Internet Explorer are ok. But how to make Firefox page setup margins as i need? For other options i have
used CCK2 Wizard 2.0.4 tool. It worked fine. Maybe i can put some information in C:\Program
Files\Mozilla Firefox\defaults\pref\autoconfig.js I have some usefull data in it allready. I
have found info that: "Setting print margins is done in the printer settings". I have a lot of
printers, so i can not set printer margins individualy for each of them. Now mozilla shows top,
bottom, right, left each 12.7 mm. What should i do if i have a lot of printers in enterprise
environment?

Firefox has a profile folder that has preferences to save this. But the config that would need to be changed is:
print. save_print_settings = True - (default): Save the print settings after each print job
Locking that preference: [http://kb.mozillazine.org/Locking_preferences]
Or done manually:
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
Check these values accordingly and change them if necessary.

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

How to install and set printer paper and tray automatically via script or batch file

Hi,
Our firm using HP Printers and we need to deploy printer in Citrix Environment where setting does not save to the Base PC Image.
Because our Environment is Citrix (User Settings and Printer are deployed when user login).
Can we build the setting into the Base PC Image for All users?
Printer get install when using login.
Problem that I am encounter right now are:
1. How to correctly identify all tray from each printer.
2. How to set all paper tray to A4
I am currently using Powershell Script to install printers during login, all the printer driver has been installed to the Base PC Image.
But the trouble I have is when the script run to completion.
It only added the printer.
I've been googling, but I can't find a way to detect printer tray or how to set all the tray to A4.
I don't mind using any type of script/batch file or even program.
Any of the following language is C#, VB.NET, powershell, vbscript or Event Access to HP API ?
Our Environment:
Windows 7 x32 SP1
Windows Server 2008 R2 (Print Server)
I am using the PCL 6 Printer Driver.
Our Printers are:
HP LJ CP1025NW
HP C LJ 4650
HP C LJ 3525
HP LJ 1045
HP LJ 2050
HP LJ 3055
HP LJ 4015
HP LJ 4350
HP LJ 4700
HP LJ 2035n
Thanks in advance
Regards Dat.

Most of those printers are commercial grade printers. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How much ink does a print head alignment use on a MX860 printer?

Just wanted to know how much ink is being used when I run a print head alignment job on a MX860 printer?
Thanks.

This is a printer issue and it's only covered under the Epson Warranty Program, which is 1 year. AppleCare has nothing to do with that.
You'll probably have to replace the printer if the print heads cannot be replaced. That's the issue when you buy an inkjet that has print heads that aren't part of the ink cartriges... when they go bad, they go bad and you're hosed. If the issue persists after a print cartridge change, then it's definitely the heads.

How to set printer option for information broad casting

Hi
I have web template theer i select information broad casting and selected by print , theer its aksing printer name? how can i give setting , if i wnat get prinetr where can i do printer setting
ple let em know

Hi,
we can set in sap menu>tools>CCMS-->Print:
for more details check this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1029340b-041d-2a10-76bd-fe83350aad29
thnks.

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

How Do I Set Print Quality in PSE 10 to above 720 DPI?

Hello Everyone,
I am trying to print a 4888px x 3456px (A4 aspect ratio) to an A4 sheet from an Epson SC-P600 inkjet printer.
In the PSE 10 Print Dialog Box I have set PSE to Manage Colours and selected my printer ICC profile. From the Print Dialog Box's "More Options" window I click Printer Preferences and set the Print Driver's Print Quality to SuperPhoto 5760dpi x 1440dpi.
After clicking OK a few times to get back to the PSE10 Print Dialog Box, I see 720 DPI as the Print Quality value at Item 2 - Printer Settings on the right hand side of the PSE print dialog box. Even if I change the printer driver's print quality to 1440dpi x 1440 dpi, the print quality value remains at 720 DPI at item 2 in the PSE print dialog box.
I expected to see a value of either 1440 DPI or 5760 DPI values in the PSE print dialog box after setting the print quality in the printer driver.
How can I tell the PSE10 print dialog box that my printer is set to 1440dpi, or higher, or will the printer still print at the the printer driver's setting regardless of the DPI value in the PSE print dialog box?

save your settings as a preset... after you click print and change your settings... click on the Presets drop down and save as... it defaults to the last used preset provided you saved your changes.

Hi, how to set printer to alv grid, please check my code

Hi,
Iam giving my code, please observe...
DEFAULT PRINTER NAME "A909".
NOW IAM SETTING OT "LP01".
GS_PRINT-PRINT = 'X'.
P_PRINTR = 'LP01'.
CALL FUNCTION 'UPDATE_DEFAULT_PRINTPARAMS'
EXPORTING
USER = SY-UNAME
DESTINATION = P_PRINTR
IMMEDIATELY = ' '
RELEASE = 'X'
NEW_LIST_ID = 'X'.
SY-BATCH = 'X'
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK = G_CONSISTENCY_CHECK
I_STRUCTURE_NAME = 'KNA1'
IS_VARIANT = GS_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT
IS_PRINT = GS_PRINT
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING = GT_EXCLUDE
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = ITAB2[]
IT_FIELDCATALOG = GT_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
After running this program iam getting the default printer spool request number 'A909', Iam not getting printing form 'LP01'.
Need is to send the print to given printer (LP01), here printer may varry accoring to the selection. So nee is to set the printer that which has choosen.
Please give me the valuble solution as early as possible.
Please solve this as early as possible.

Hi Ravi,
You can choose for the print version to be created as a PostScript file instead of a PDF document. The PostScript file is then sent directly to a printer of your choice
If you do not specify an output device here, a PDF file is generated and displayed on the screen.
You use the methods of the interface class IF_SALV_WD_PDF_SETTINGS for this (implementing class CL_SALV_WD_CONFIG_TABLE).
<b>Function</b> <b>Method</b>
Set ALV output to be printed immediately --> SET_PRINT_IMMEDIATE
Check whether the ALV output is to be printed immediately --> GET_PRINT_IMMEDIATE
Set printer --> SET_PRINTER
Get printer --> GET_PRINTER
See the below for SAP link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/27472def40601ee10000000a422035/content.htm
see the thread also
Re: How to set the printer in set_table_for_first_display
mark all the helpful answers
Regards
Sudheer

How set printer defaults for a printer

My motivation is to have my wife's new MacBook always print double-sided. Currently she needs to select the preset that we've made for printing duplex, but that's easy to forget to do.
OS is 10.4.7
Is there a way to set the printer defaults in this OS?
I want to have duplex just be the default, even after reboot, and if she wants to print single-sided then she'd need to select the other preset.
BTW: If it makes a difference -- We're using a Xerox 8550DP, for which the duplex selection is in the standard place of Print -> Layout -> Two-sided -> Long-edged binding
(Some other printers require using the duplex selection in their own printer's section under that Copies & Pages dropdown menu but not this one.)
Maybe I'm just not a very good searcher. I searched many here, MacFixit, MacWorld magazine, generally on the web. Looked in my David Pogues's Tiger book and Andy Ihnatko's Tiger book. I came up with nothing about setting printer defaults at all.
I bet I can tweek it in a pref file. I hope I don't have to resort to a hack to do something this standard.
Any help or pointers would be greatly appreciated!
PB G4, MacMini (Tiger Server), MacBook Pro Mac OS X (10.4.5)

I think you can do this. Set up a two-sided setting,
and save it. Print with it. Then find the preference
file com.apple.print.custompresets.plist, choose Get
Info, and lock it.
If you want to save another setting, you will have to
unlock it.
Hey this is only a workaround but it is a pretty darned good workaround, especially because it's not too invasive (only locking a pref file at the user level) and what's stored in that custompresets.plist file is com.apple.print.lastPresetPref, which is probably the key to your suggestion. I think I understand it, anyway.
I followed that procedure, created a Custom Preset with duplex turned on which I named "Standard Duplex", then locked the file you suggest that's in my user's home Library. It survived app switching and a reboot. It seems to work great, and I can still use the Standard setting as well if I want to. I even chose the custom setting and although it's locked the temp changes I made were enacted (I chose to print this page, scaled to fit a #10 envelope) and that worked too. The Standard or other presets can still be chosen when you want to use those, and the app remembers the last setting through the rest of the session, it's just that upon opening an app the default is now my custom "Standard Duplex". This does what I want.
I think this is a great workaround. I'm going to go load it onto my wife's MacBook. I suppose I should mark this solved even though there's no real, y'know, user-manual way to do this. Maybe something I'll just hope is a feature in Leopard.
Thank you Bruce and all the other helpful folks who pondered on this one! Heh, I'm sure 1/2 of the tree population thanks you too.
PB G4, Mac Mini G4, MacBook Pro, MacBook Mac OS X (10.4.7)

How to automatically set Print Scaling to 'None'

Is there any way to automatically set print scaling to 'none' on an existing PDF document?
This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
Many thanks in advance for your help!!!!
HJ

Would something along these lines would work???
"if printing 1:1 is critical, my recommendation would
be to have an area on the page(s) for which scaling must be performed
where you explicitly state the requirement for no scaling AND in which
you place an line of known length, let's say an inch or a centimeter with
text that warns that if that line is not exactly at the size specified,
to reprint without scaling."
(extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

How to set print format what I want in ALV Report

Hi, guys...
Let me ask something.
In AVL Report, I want to set print format when users print list.
so, I used function 'SET_PRINT_PARAMETERS' on INITIALIZATION Event. but it doesn't work.
Looks like it works list program(using 'WRITE') only.
Please, give me some hint^^

Thanks for the reply...
But, I want to set print format like 'X_58_170'...
I call the fuction 'SET_PRINT_PARAMETERS'
... example)
CALL FUNCTION 'SET_PRINT_PARAMETERS'
    EXPORTING
      LAYOUT     = 'X_90_120'
      LINE_COUNT = '55'
      LINE_SIZE = '110'.
but, it doesn't work in ALV list program. It only works 'write' list program.
Give me an answer plz...
Regards
Kyung Woo

Customize countdown in Print to Video--How to??

Customize countdown in Print to Video--How to??
FCP 4.5HD.
Ted.

If you didn't use black after the couple of frames of the "2," what would you put between there and the starty of program?
You CAN change the black if you want... but there's a reason for :02 of black:
It's expected and necessary in live television.
Black is necessary on the tape in order to be able to go from "black to black" as when going into a commercial break.
------- stop here if you don't want the background on why---
The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
There's usually a fade to black out of program and then eithe a cut or fade to the next video/audio source.
A similar process happens at the end of the commercial. At a specific number of seconds before the end of commercial #1, commercial #2 is rolled... then taken... and so forth if things are coming off of separate tape machines.
Black at the head and tail of spots lets a simple routing switcher make the change from playback device to playback device.
In the "olden days" before automated tape playback machines, commercials were either on film reels (edited together into clusters with a countdown at the beginning and black leader on the tail,) on a videotape that was edited together in a similar fashion... or... (sometimes dangerously so) rolled from four or five different tape machines "live" on the air.
If things were rolled "live," one right after another, I'm sure that there were a lot of praying break operators in stations where equipment was old, maintainence was lax and Murphy was a regular visitor.
The countdown and black on each commercial was a necessary timing tool in order to get through the break cleanly. I can tell you from experience that NOT having them made life verrry dicey when it came to getting in and out of program elements cleanly.
The RCA TCR 100 Cart machine and the Ampex model that did the same thing) would play all the elements in a break and do the switching in between... simplifying the process... until there was a breakdown of the machine, and then you should have seen the scramble in Master Control and/or the tape room.
Its a lot different these days if the station or network airing the commercials plays spots (commercials) off a file server... it's a different game entirely.
Everything is automated and "trimmed" when it's transferred (or start and finish marked on the file).
In that case. the countdown is not needed to get the commercial on the air... but is included to ensure that there's a reference for where the spot actually begins. The :02 of black is still included, since stations traditionally fade or cut to black between spots.
The countdown itself was designed to allow theater projectionists make smooth changes from reel to reel as a movie was projected on the screen.
The projectionist would thread the film on the incoming projector so that the first "10" was in the gate.
As the outgoing reel ended... little cue dots in the upper right hand corner of the screen "cued" the projectionist when to roll the upcoming reel... and then a specific number of seconds laterten in our examplea second set of cue dots (four frames worth) on the screen would cue him to hit the changeover button, opening a douser on the incoming projector and closing one on the outgoing projector... and swapping audio sources at the same time.
The countdown performs a similar function in live television: The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
You'd think that woould be the case for movie packages and syndicated television shows, right?

SET PRINTER TRAY AT RUN TIME

HELO EVERY BODY
I HAVE TWO REPORTS I WANT TO PRINT FIRST REPORT FROM UPPER TRAY AND SECOND REPORT FROM LOWER TRAY HO CAN I DO THIS?
SECOND PROBLUM IS I CREATE A REPORT ON LEGAL PAPER WHEN I RUN THIS REPORT IT WILL TAKE DEFAUT PAPER SIZE OF PRINTER WHICH IS LETTER HOW CAN I SET PAPER LEGAL BY WHICH I NOT CHAND PAPER EVERY TIME
THANKS IN ADVANCE
KHUDA HAFIZ

Faiz,
Pl see my response, and reply in your other thread:
set printer tray and page size
Navneet.

HT3771 I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc." or "Kyocera Inc."
http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/25359/0/Mac Driver3SoftwareGuide1.1.pdf
On the printer driver documentation, Page 5, in the Imaging setting, although the options are not specifically shown, there should be an option on that screen of the print driver to click and select "B/W" or 'black and white' or 'grayscale' or 'monochrome' as Print Mode rather than the "Full Color" option shown in the illustration below.
You access these settings once you have selected 'Print' from an app.
If necessary, you might need to click on the 'Down arrow' button next to the printer name (OS X 10.6), or 'Show Details' button at the bottom of the print dialog box (OS X 10.8) to see additional settings.

Re-setting print cart. alignment - how do I?

Similar Messages

Maybe you are looking for