RE: Setting up the Express Delivery Company in SAP
Hi,
We had engage a company to perform delivery services.
I wanted to set it up as a EXPRESS Delivery partner - Forwarding agent.
I want to make use of the transportation planning in the system.
Can any SAP guru guide me what I need to configure and what data do I need to maintain?
Any references or BLOG that can helped me?
Thanks
The main configuration is in VTRC by creating a vendor master for the forwarding agent.It's been a while I worked on this.
So cannot give you the exact details but I have found a lot of articles relating to setting up express delivery company.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1b17c690-0201-0010-17b1-a362e172a094
http://www.sapfans.com/forums/viewtopic.php?f=5&t=318640
http://www.erptips.com/Snippet1/pohgynlevs.pdf
Hope this helps.Please try it in the sandbox and let me know if you have any more issues
Similar Messages
-
BRF -fetch formula value set in the expression
Hi expert.
My question is how to fetch formula value set in expression of BRF.
Here is my scenario.
For SC object BUS212 is have maintained the 2 levels approval process as below .
object type u2013 BUS2121
Process schema - 3C_SC_700_002
100-approval-u2018 ' u2013 u2018 ' u2013 RR_EMPLOYEE- Specify Employee for Approval- 365-40007953- ' ' -dec entire doc.
200-approval- AMT_LIMITu2013 limit ck u2013 RR_EMPLOYEE- Specify Employee for Approval- 250- 40007953- ' '-decision for entire doc.
For second level approval system checks for SC cart total amount .
In the BRF the expression type 0FB001u2019 (CL_FORMULA_BRF) is created for event (AMT_LIMIT ) is EX_AMT_LIMIT_2
here
Expression is of type u20180FB001u2019 (CL_FORMULA_BRF ), formula editor
Has condition 0V_SC_TOTALVALUE ( Overall value) > 10000 (number)
The process levels are maintained in table u2018 /SAPSRM/C_WF_Lu2019 here I got the EVENT> AMT_LIMIT.
800 BUS2121 3C_SC_700_002 100 A RR_EMPLOYEE 365 40007953
800 BUS2121 3C_SC_700_002 200 A RR_EMPLOYEE 304 AMT_LIMIT 40007954
In table TBRF210 I got event and Expression relation
800 A SRM_WF AMT_LIMIT A EX_AMT_LIMIT_2
In table TBRF200 I got the BRF expression EX_AMT_LIMIT_2 and object OV_SC_TOTALVALUE relation
800 A SRM_WF F EX_AMT_LIMIT_2 F A 0V_SC_TOTALVALUE
Now here is my problem how to fetch condition 0V_SC_TOTALVALUE ( Overall value) > 10000 (number)
Suggest the Class-method , tables or FM to fetch this 10000 value against 0V_SC_TOTALVALUE ( Overall value).
Warm Regards.
Indranil PanzadeHi ,
first thanks for taking the interest in this thread .
I need this data matinated in BRF expression for my custome (report and pplication)purpose.
here i maintained the value 10000 for SC total amount against some EXPRession .
that i want to show in my report's column like this
Object- process levels-EVENT-EXPRESSION-valid amount(EXP.formula amt) -reposible person(AHUJA)plant-(1000).
wants more explaination ,
please reply.
Indranil -
Change the name of company in SAP
Hi Sap Experts
my requirement is to change company name in sap 4.7
till cutoff date all data/reports must exist with previous company code/name and after that cutoff date all data/reports will be assigned to new company code/name. both companies will be separate entities and work will done only in single company. is it required of fresh customizing with new company code and also customizing of all other modules or we can do this task without a fresh customizing wih small changes. modules using are FI/MM/SD/QM/PM/PP . Z-working also involved with a number of tables.
ie. existing company code/name - 1000 ABC LTD. (till 31.5.2010)
new company code/name - 2000 xyz Ltd. (from 01.06.2010)
need expert guidance at war level . Thanks in advance
Manjithi
Since one legal entity will cease to exist and a new legal entity will come into being, you will have to follow all the period end closure procedures.
Also you will need the BS,P&L,Cash flow statements then the year end process also will have to be completed,
A new company code will have to be created and the balances of the old company code will be transferred to the new company code.
If it suffices that only the B&S items and the retained earnings need to be transferred then after the year end process the balances can be shifted to the new company code.
regards
eashwar -
Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.
The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters. -
Need help setting up older Express.
Heres what I have and what I want to do:
I have a 2005 Power Mac G5 (10.5.8) without built in wifi, I want to connect it to my network via Express in bridge mode(?). I cannot hard wire because of its location but it is well within wifi range.
I get thru the set up and have a steady green light and Airport utility says its connected to the internet but it seems that its not sharing thru the ethernet port.
After set up, the express reboots and cannot be found by Airport utility, I have to reset to try anything different.
My main router is not an Apple base station.
I can't seem to install (it fails) Airport utility 5.6 on my Macbook (10.7.5) to try a different set up. And I can't seem to find any solutions on the web for my situation. I have also tried set up via iPad and iPhone - no luck.
Thoughts, Suggestions, Solutions?
Thanks!I get thru the set up and have a steady green light and Airport utility says its connected to the internet but it seems that its not sharing thru the ethernet port.
The older A1084 and A1088 versions of the AirPort Express do not have the ability to join a wireless network and provide an Ethernet signal at the Ethernet port, so if you have one of these models, that would explain the difficulties.
Look on the side of the AirPort Express to locate the model number, which may be difficult to see with gray lettering on a white background.
The more recent A1264 and current A1392 version of the Express are capable of doing what you want. -
I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again. -
How to set up the airport express with a linksys wireless-g broadband router
I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.
If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware. -
to help me set up my airport express to my public wifi at my apartment complex
I am a bit lost if you have a public wifi why are you using ethernet into the wall.. is the ethernet just for your apartment.
The Express can work as a wireless bridge only to the public Wifi nothing else.. it cannot extend wireless.. so the express would need to plug into another router for you to get more than one single connection to the building.
Also does your public wifi have a login page . .. because that will then make life much harder. -
I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl. A friend said to set up the network from home prior to traveling. How do I set this up? Thanks.
In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
To create a new profile:
Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
Click "+" to create a new profile; give it a name, and then, click OK.
Set options, such as network name, passwords, Internet connection method, etc.
When done setting the options, click Update.
To switch profiles:
Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX. -
Xslt error: the expression does not evaluate to a node-set
hi guys - i'm really down because i cannot find / understand my xsl error and i have to finish my work very very soon
the error message (by using xalan to create from the xml file my html output) is the following:
xslt error: the expression does not evaluate to a node-set
and the code fragement is:
<xsl:template name="getNext">
<xsl:param name="currentKnoten" />
<xsl:for-each select="$currentKnoten"> //error is in this line
</xsl:for-each>
</xsl:template>please... help me....ok thanks!!! this saved me some time ;-)
now i go back to the origin problem... my main idea is the following xsl code... may u can see here the problem with the node site.. but i think u need the xml file or?
however this is my relevant xsl code:
<xsl:template match="DATA">
<xsl:element name="process">
<xsl:attribute name="name">
<xsl:value-of select="@name" />
</xsl:attribute>
<xsl:apply-templates select="INSTANCE"/>
</xsl:element>
</xsl:template>
<xsl:template match="INSTANCE[@class='Data']">
<xsl:element name="node">
<xsl:attribute name="name">
<xsl:value-of select="@name" />
</xsl:attribute>
<xsl:attribute name="class">
<xsl:value-of select="@class" />
</xsl:attribute>
<xsl:call-template name="copyAttributes" />
<xsl:variable name="nextNodes">
<xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)" />
</xsl:variable>
<xsl:call-template name="getNext">
<xsl:with-param name="currentNode" select="$nextNodes" />
</xsl:call-template>
</xsl:element>
</xsl:template>
<xsl:template name="getNext">
<xsl:param name="currentNode"/>
<xsl:for-each select="$currentNode">
<xsl:element name="node">
<xsl:attribute name="name"><xsl:value-of select="@name"/></xsl:attribute>
<xsl:attribute name="class"><xsl:value-of select="@class"/></xsl:attribute>
<xsl:variable name="nextNodes">
<xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)"/>
</xsl:variable>
<xsl:call-template name="copyAttributes"/>
<xsl:call-template name="getNext">
<xsl:with-param name="currentNode" select="$nextNodes"/>
</xsl:call-template>
</xsl:element>
</xsl:for-each>
</xsl:template>
<xsl:template name="copyAttributes">
<xsl:for-each select="descendant::*">
<xsl:copy>
<xsl:copy-of select="@*|node()"/>
</xsl:copy>
</xsl:for-each>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:apply-templates/>
</xsl:template> -
I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages? How do I set this up?????
I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
You can look up the manual for your express here for more details:
http://support.apple.com/manuals/
Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
Extending the Range of an Existing AirPort Extreme or
AirPort Express Network
You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
Note: Extending the range of a network using WDS may reduce overall networkperformance. -
Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)
Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501. This arrived with Signal Express, which I intend to use as a Lite version. I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs? I have this working on a 0.1sec sample period and can interrogate the logs after recording. Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured? Cheers.
Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
Sorry about that -
EKPO-EGLKZ - Setting the "Final Delivery Flag" on a transport order
When entering a goods issue to a transport order (Movement type '351'), the Final Delivery indicator cannot be checked, because it does not appear on the screen. I looked in configuration and I cannot find where to 'turn on' that field on the screen. Does anyone know how to 'turn on' that field?
In a business example, Plant #1 created a transport order for a qty of 3000 feet of cable from Plant #2. When Plant #2 issues the cable to the transport order, they will only be issuing 2900 feet, because that is all they have on that reel. They will not be issuing any further cable. They want to consider this item complete. How does Plant #2 indicate this will be the final delivery. Can they do that from the movement type 351 screen?if you are talking about stock transport order, you can set the final delivery indicator for that particular STO as follows:
Go to me22n, give your STO number, in the item data below there is a tab called delivery, inside that, there is a checkbox against final delivery, you can check that box for that particular material in the STO, but once you check it, you can do further goods issue for that material.......
Reward, if helpful....
Thanks,
Noopur -
Trying to set up airport express to extend my Wi-Fi network. Primary base station is a time capsule. Tried searching for airport express using Wi-Fi status, no luck. Even tried plugging airport express into iMac, still no luck. Airport express showing solid amber light. Thanks for any help.
Airport express showing solid amber light
Unfortunately, this can mean one of two things:
1) The Express is locked up and will need a Factory Default Reset procedure to try to return the device back to its original default settings so that it can be reconfigured again.
2) The Express is defective. If you cannot get the Express back to a slow, blinking amber light after a Factory Default Reset, the Express will need to be replaced.
Try the Factory Default Reset a few times and report back on your progress.
Resetting an AirPort Base Station or Time Capsule FAQ -
I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?
Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.
Maybe you are looking for
-
My macbook pro mid 2010 keeps crashing and i keep getting the following report can anyone help me?
Interval Since Last Panic Report: 30536 sec Panics Since Last Report: 1 Anonymous UUID: 607D9979-1C74-04D7-EA6E-CCF8837A6E71 Tue Jan 14 22:09:18 2014 panic(cpu 2 caller 0xffffff7f9ba88f1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0
-
I have been doing online banking with this bank for 7 months with no problems. About 2 weeks ago I started having problems with certain things within the account. I called the support team with the bank and told them the problem and they suggested to
-
Issue Screen Scrolling Very Jumpy - How can it be improved?
I have setup 3 MS Windows Server 2012 R2 Remote Desktop Servers, connecting to Wyse C10LE terminals. When scrolling in documents the display screen does not do so clearly. I've tried reducing the encryption level and security settings but still no
-
Get field position using PHP or JavaSript
Hello guys! How can I get current position of some fields in Pdf form. For example, I have Pdf form with signature field. I need to get current page number and x, y position of this field. Can you give me some code example on PHP or JavaScript. Thank
-
Trouble printing a password protected adobe document with hpeprint?
How do I print a password protected Adobe document with hpeprint? I have an Officejet Pro 8600Plus