Re-size Layer with Smart Filter without affecting Smart Filter aspect of the layer

I made a wax seal on photoshop with a lot of embossment, bevelment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a messgae that reads:
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temprarily while the transform is being previewed. They will be applied after commiting the transform."
OK
[] Don't show again
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which cretaes a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer

Right-click on the name of the Smart Object layer in the Layers panel to get the menu shown below. Pick "Convert to Smart Object" to encapsulate the SO and its Smart Filter and Layer Styles inside a new SO which can be resized without changes in appearance.

Similar Messages

  • HT4848 Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

    Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

    They already damaged you Mac by fooling with the BootCamp partition without knowing what they were doing. I wouldn't suggest haveing them help you do anything.
    Here is the article that describes the Recovery HD: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
    First, see if you can boot into the Recovery HD. Restart and hold down cmd-r until you see the gray screen. It should boot into Recovery. If your Mac shipped with Lion or Mountain Lion, it will boot into Internet Recovery if it cannot boot into the Recovery HD on the hard drive.
    They should have tried this at the store.

  • Whats with Smart Print IE9 needing the BingBar? Don't want the BingBar!

    Smart Print is available for IE9 but there is no option to download without the BingBar.  If I downloaded every tool bar with every piece of software my Explorer window would be full.  Give us a break and make it optional or it will be rejected more often than not.  Your emoticons don't even work!

    Did you download this link? Version 1 of Smart Print is used with the Bing Bar.  Version 2 extends support to Chrome and Firefox and does come as a standalone plug-in so you no longer need to have the Bing toolbar to use it. It is difficult to tell the difference on the page because the verbiage has not been changed to reflect the update.  The link I provided is the one that allows you to down load it with out the Bing bar. I would uninstall it from programs and features, reboot the computer and down load it again. Also, look for the ">>" icon in top right corner of the tool bar on the browser page, sometime the smart print icon can be hidden in that drop down list. Also, go to settings and click on the "Manage Add-ons" and make sure that it is enabled. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Interactive Report with Declarative Filter pointing to the same page

    I want to apply the declarative filter that will be applied to the IR in the same page. Can anyone let me know the settings to be done.
    Thanks
    Deb

    A redirect will not work - we render your page and you enter your value but then you never submit the page to be written to sessions state, rather, you call the page again. You need to create a button that submits the page and then a branch to the same page that passes the same parameters. That said, I created a test case and found some sort of bug with passing an IR condition in a branch - it is failing with an odd error. We are looking into that. In the meanwhile, is there a reason you need another item to do your filter and cannot just use the built-in capability of the interactive report?
    -- Sharon

  • How to replace a layer which has a mask applied without affecting the mask?

    I have a layer with a photo.  I have animated a mask on this layer, but now the client wants the photo replaced with another one.  When I add a new photo to a new layer and copy the mask properties from the good working layer, the mask winds up in a different place than the original.  I've tried doing a replace footage with the source photo trying to make it the new photo but same results, the mask always gets repositioned.
    How can I replace an image on a layer that has an animated mask on it with another one without affecting the mask?
    Thanks,
    Steve

    Thanks everyone.  Now that I understand more about Track Mattes it works fine.  I can scale and position new layers under the animated mask.  This helps tremendously

  • Documents with Smart Objects - Very slow to open and Save - CS6 Photoshop

    When opening and saving documents with smart objects photoshop freezes the adobe PS loader (circle dots) is replaced and the system loader (multi colored wheel of death) spins for 30 seconds or more.
    What I've tried so far based off looking at various posts.
    Photoshop Preferenes
    Save in Background off
    Maximise PSD and PSB file compatability never
    Cache Tile Size: 128k
    Advanced Graphic Processor Settings: Basic & Normal
    Layer Panel options: No Thumbnail
    Observations and workthroughs to date
    The file size and amount of smart objects effects the file expotentially i.e. The more smart objects you have the worse it gets
    These files worked perfectly in PS CS5
    It also happens on files natively created in PS CS6
    The CPU is maxing out at 100% while PS loads
    Closing or opening suitcase has no effect.
    System:
    iMac 27-inch, Mid 2011
    Processor  3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6970M 1024 MB
    Mac OS X Lion 10.7.5 (11G63)
    Suitcase 4
    Anyone got any ideas? This is making me go nuts!

    A solution!
    It turns out the problem in my case was in fact Suitcase. Previously, I'd tried turning it off, but that didn't fix the problem, so this time, I uninstalled it completely and the problem disappeared. I then began re-adding it (installed 15.0.1, upgraded it, etc.) and the problem resurfaced with the addition of the Photoshop-specific plugin. Deleting that plugin solved the problem. So it seems that "disabling" Suitcase by stopping the TypeCore doesn't seem to actually disable all of the tentacles it sticks into your system.
    You can find the plugin here: Applications / Adobe Photoshop CS6 / Plug-ins / Automate / ExtensisFontManagementPSCS6.plugin
    (After a restart, I also had to delete the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)
    Alternately, if you don't want to delete the plugin, disabling it from within Photoshop seems to work as well. To do that, go to File > Automate > Extensis, click Preferences..., then deselect Enable Suitcase Fusion 4 Auto-Activation.
    Fortunately, the plugin doesn't seem necessary at all to use the the core functionality of Suitcase (enabling and disabling fonts) in Photoshop. I didn't even know what these app-specific plugins did until researching this problem, and I still don't quite understand the point of them. I guess they allow you to let the apps for which they're installed do a little bit more of their own management (enable a font via Suitcase that isn't enabled system-wide), but that seems like more control than I need--if I'm enabling a font, I want all my software to be able to use it.
    Anyway, the problem seems to be completely solved on my system now, though I just did all this, so more testing over the next few days is required. I'll post here if any issues crop up. I'm interested in hearing if this solves it for anyone else as well.

  • Acquisition with vendor and without vendor

    Dear All,
    This is my first time using FA in SAP Business One.
    I have a lot of question about FA in SAP B1 especially in FA Acquisition.
    There are two kinds of acquisition. With vendor and without vendor.
    If we choose the aquisition with vendor, we must enter the vendor and the JE will be created like this
                                      Debit             Credit
    V01                                                 1500 USD
    Asset Computer       1500USD
    It seems the the JE create like AP invoice, so we can continue the out going payment for the vendor.
    But the problem is in Acquisition without vendor.
    I have a scenario.
    I buy a car. I create PO > GRPO> AP invoice--> Out going Payment.
    After that if i run the acquisition without vendor.
    The JE will be created like this
                                                                    Debit       Credit
    Clearing Acc. Asset Acquisition                             1500Usd
    Asset Car                                                 1500 USD
    ( Please correct me if my Journal is wrong )
    From this Journal Posting, i find some thing odd.
    When i buy a car and i created the GRPO.
    The JE will  create the Asset car position in Debit.
    After that i create the Acquisition without vendor. The Journal also posting the Asset Car account in Debit. So the Asset Car account balance become 3000 USD.
    So what must i do to avoid this problem.
    I check the document FA. It is said that before create the Acquisition without vendor, the AP invoice must already be  created.
    In the documentation, they create the AP invoice in service type. Is it a must to create the AP invoice like this ?
    Please tell me what should i do if create the Acquisition without vendor.
    Any suggest or solution would be great.
    Thanks in advance
    Regards
    KK

    Fixed Assets are created in the add on, not the item master.
    Your choice is that
    1. all fixed asset puchases go through a clearing account and a different team is responsible for creating the assets & performing the acquisition,  (1 step for one team, two for another) or  
    2 that the person acquiring the asset creates the master data item in fixed assets, then the acquisition with vendor (one two step process)
    Depends on the size of the organisation and the roles & responsibilities within the organisation

  • Setting up a new email account without affecting the original

    I was using one ISP for my old email and have now switched to a new one with a new email address. How can I keep my old inbox for reference and setup a new account that will now download into a separate inbox without affecting my original email?
    Thanks.

    Greetings,
    How can I keep my old inbox for reference and setup a new account that will now download into a separate inbox without affecting my original email?
    The same way you would setup any other email account.

  • All items are not visible even with no filter

    I have a custom list and am not able to run a search the list, through the "all items" view, even with no filter set.  The list is also set to only view 50 items at a time, but I am not able to view the next batch of items.  The search
    will give no results even when the list contains the item with that specific information.

    Hi,
    1) I understand you are not able to view the 'All Items' in the list.
    Can you check the total number of items that list contains.
    Go to Site Actions-->View All site content see the number of items beside the list name( right side)
    I suspect the list might be reached the threshold value.
    2) If the number of Items are less than the threshold value then I would suggest you do a  test by creating another view by providing only the view name (Don't use any sort, Filter, Groupby ...etc) and just keep the default settings and let me
    know if you are able to see the items using the newly created view.
    ****************************************************************************************** Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem.
    s p kumar

  • Hitting the 32k size limit with Keyword Expansion in packages

    Hi!
    I am hitting the 32k size limit with Keyword Expansion (KE). It is hardcoded in the procedure jr_keyword.analyze_mlt.
    Are there any plans to get rid of this limit, so package bodies with size > 32000 bytes can be expanded?

    Well, I am making progress. With a combination if utl_tcp.get_line() - to trap the header and utl_tcp.get_text - to get the data at 32K chunks - which I then put into a CLOB or VARRAY of VARCHAR2; I can get as much data as is sent.
    The problem now is speed.
    It takes over 60 seconds to get 160K (5 32K chunks) of data when I put it into the VARRAY of VARCHAR2, and it takes even longer if I use dbms_lob.write() and dbms_lob.writeappend() to store the data.
    Am I doing something wrong? Is there another way?
    Thank You for any Help.
    Shannon

  • Editing a layer's out point in time without affecting in point??

    I'm really embarrassed about this... I certainly USED to know how to do it... and I've searched for the answer, and I thought it was going to be easy to find, and it wasn't...
    Anyway. I need to edit a layer's OUT point without affecting the location of the IN point in the composition. [ is working fine for the in point. Then, pressing ]... The entire layer slides to the left so that the out point is there, all right, but the in point has now moved the other way so that it's gone back in time. I want the out point to TRIM the (text) layer and make it shorter, not slide it around so that it's the same length and all it's done is to move.
    The text layers will overlap each other, but the thing is that they're of varying lengths
    (It's AE 5.1, btw...)
    I just KNOW there's an easy way to do this. And everyone here is so smart!

    alt/option + ] for out point
    alt/option + [ for in point
    Just position the CTI and press the keys.

  • Reducing image size without affecting animation

    After having trouble rendering, I realized that he images I scanned in are too high resolution even for my HD comp.  For my next project, I'll know, but for this project, is there a way to know how to reduce those images appropriately and substitute them so that I won't have to do any new keyframes or something? A way that I can just edit the files in Photoshop and have them update to be lower res in AE without affecting their sizes?

    There's generally no easy fix for this problem.  Make your life easier by scaling your images in Photoshop by a fixed amount, eg 50%.  Then re-scale in After Effects the appropriate amount.
    If there is scale-based animation on the layers, you can add a Null to your comp, parent the Null to the layer in question and scale the Null the appropriate amount.  You can delete the Null when finished.

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • I am sharing a account with my mother. I would like to change my itune account to a separate account. How can I do that without affecting her itune account?

    I share a itune account with my mother.  I would like to set up my own itune account keeping all my info and library from my itune account.  How do I go about setting up my own account without affecting her account and her itunes?  It seems if she gets a new app it appears on my phone and visa versa.  After I change my account will there be a problem syncing it with my phone and ipad?

    Welcome to the Apple community.
    The simple answer is yes you can. On a single user computer, the user can have secondary iCloud accounts, which they can add through the system preferences > mail, contacts and calendars. The only drawback here is that only the primary iCloud account can use photo stream. This can be worked around by having a second user account on the Mac. Each user account could then have a different primary iCloud account, one for you and one for him, your account could then receive your photo stream pictures.
    Are you also aware that you can have iCloud on your PC and download your photos stream pictures to it.

Maybe you are looking for