Re-Sizing Troubles PSE10
When my clients order a disc I want them to only be able to print 4x6 prints. How do I go about re-sizing the photos to make this possible??
P.S. I know NOTHING about re-sizing so I might need step by step instructions.
Where it says Document Size.
Enter w 6", h 4" for landscape mode, reverse the numbers for portrait mode.
Since your clients will be printing, the resolution should be in the 240-300 px/in range.
You may not be able to maintain the aspect ratio (3:2) with constrain proportions checked. Distortion of the picture may result.
Try it - nothing to lose. But if it does not work out for you, you may have to crop a bit. I don't know what you are starting out with. Be sure to work on duplicate files.
Also, note that you can batch resize via File menu>Process Multiple Files. See the help files for detailed info.
Similar Messages
-
Trouble with re-sizing images/textboxes InDesign CS6
Has anyone had any problems re-sizing images or text boxes in InDesign CS6?
I have been doing it for months by selecting the corners and dragging them in or out but suddenly it's stopped working. The arrow no longer changes to a double arrow when I hover over the corner and all I can see is an hourglass when I hover over any type of frame.
I can resize images only be changing their percentage in the transform objects -> scale options.
I tried re-setting my preferences and it didn't help.
Please advise me if there is something else I can do.Tried that and it didn't help.
The only thing I can think of is that there is something wrong or slow with my remote desktop connection which is affecting functionality. No one else seems to have had this problem.
Thanks for your effort though. -
Having trouble sizing multiple graphs using a For Loop in Excel.
I am creating multiple graphs in Excel using LabVIEW but I can only set the size for the first graph. The others are ignored. I am using the Excel Insert Graph Vi. I can change the position of al 4 graphs and i can change the size of the first graph created but not the others. Simply create and save a blank Excel workbook and use it when it prompts for the file. Here is my my code. Will someone please let me know what is going on. Thanks.
Attachments:
Excel Graph Test.vi 88 KBIf anyone is still following this thread, I have discovered a solution to the problem of resizing multiple graphs in Excel with the Report Generation Toolkit. The problem seems to occur because subsequent graphs that are added to the report are configured to "Lock Aspect Ratio", which means you cannot assign a width and height to the graph that would violate its initial width/height proportions. I was able to get around this behavior by defining the object's position and dimensions after creating the object, as opposed to defining them at the same time the object was created. This problem will be fixed in a future release of the Report Generation Toolkit. For now, you can fix the problem yourself by modifying vi.lib\addons\_office\excel.llb\Excel Insert Graph.vi. Here is a screenshot of the affected area of code as it is currently implemented:
And here is a screenshot of what the code looks like after my modifications that fix the problem:
By assigning the dimensions after turning off the "Lock Aspect Ratio" feature, we see that all the subsequent graphs are sized correctly.
Please let me know if you have any questions on this fix.
-D
Message Edited by Darren on 07-06-2006 04:48 PM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Add_Chart_AFTER.jpg 91 KB
Add_Chart_BEFORE.jpg 53 KB -
Trouble after installing PSE10
I just downloaded PSE10 on my PC with PSE9 already installed. PSE9 has worked fine for several months. Installation of PSE10 went fine without problems. But it won't start. And PSE9 will now only start if the PC is rebooted, and the editor will not start from the organiser any more. Running Task Manager shows that Photoshop Elements 10.0.exe *32 loads, but it disappears after a few seconds.
Any suggestions? My system has 8 Gb ram and runs Win7 Home Premium.
ØØ - NorwayTry turning off internet security and anti-virus temporarily whilst re-installing.
Then turn your protection back on again when the installation has finished.
No need to deactivate when reinstalling on the same PC.
Good luck.
-
Trouble Printing Mixed-Sized Pages
I converted a Word document with one 8.5x11 portrtait page and several 11x17 landscape pages using Adobe Acrobat 9. When I print the pdf the 11x17 sheet rotates 180 degrees (prints upside down). This started happening in June (around the time I was upgraded to Adobe 9). My operating system is Windows XP. We have uninstalled the software and reinstalled several times. I have had co-workers trouble-shoot by printing the pdf from Windows 2007 and to various printers, still the same problem. Help.
Hello 1blondeval,
Welcome to the HP Support Forums!
I can only think to select the leagl pages to print and then select the letter pages to print.
But, to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
The support page for your product may be helpful in the meantime: HP LaserJet 4250 Printer
I hope this helps!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Having trouble sizing a photo for wallpaper in iOS 7
When I try to move and scale a photo for my home screen wallpaper on my iPad3, using iOS 7, it immediately reverts to it's original size, which is larger than the screen. Is this a bug in iOS 7 or am I doing something wrong?
I was able to move and scale the wallpaper on my iPad 4 by turning off the parallax motion....
Go to Settings > General > Assessibility > Reduce Motion "set to OFF"
Next, in Settings > Wallpapers & Brightness > Choose Wallpaper (pick the wallpaper) - you should now be able to "Move and Scale" the photo that you've chosen for your wallpaper.
After you've SET the wallpaper, you can go back to Parallax motion by turning Reduce Motion to "ON" (see step 1) -
Trouble re-sizing a logo in InDesign.
I am trying to resize a logo to place on a business card. When I insert the logo and hit ctrl+shift to resize with the cornerbox I shrink it and the box becomes smaller but the image stays the same size. So pretty much it is merely just zooming into the logo and cutting off the picture. It is a jpeg. file. Can anyone help please? Beginner at InDesign here.
Make sure you press the keys BEFORE you click the mouse.
-
Vector Smart (InDesign) Sizing in Photoshop - trouble?
Hi,
I created a typed grahic in InDesign and then pasted it into photoshop so that I could save for web and devices and use it for a nav bar on a site that I am buiding.
When I did this in the past, the graphic would paste as a vector smart object in the exact same size as it appears in InDesign. Now, all of a sudden, when I paste the graphic into PS it appears very large and at a higher resolution. When I make teh canvas and the resolution smaller, it becomes too tiny. I'm pretty sure I am going about this incorrectly and am wondering if someone can suggest a better way to do this.
Again, what I want to do is paste a graphic that I made in InDesign into Photoshop as a vector smart object. It is a typed word that is size 12 font. I want the size to remain the same.
I would appreciate any tips. Thanks!If InDesign included the absolute size, then the placed PDF file will be at that size.
You're placing a PDF - it can rasterize at ANY pixel size. So, if it doesn't come in at the right size, just resize it - that's what smart objects are for.
Also, for a typed word, you used InDesign? Why not just type it in Photoshop and keep the text vector? -
i am using cs4 mac 10.5 - all of a sudden I can not re-size graphics or text boxes - all I can do is move them around - I used to be able to take the cursor arrow - click on a corner box and get a little double sided arrow (for graphics) that would allow me to re-size the graphic - and/or click on the corner of a text box and re-size and re-flow the text box...
what did I do or change and how can I get the re-size feature back????
thanksYou mistaken hit the keyboard short cut for Hide Edges Command>H or Hide Bounding Box,
Command>Shift>B you can also get this back by visiting the View menu.
If you feel stupid about this you should just like everyone else and everyone else has done this from ti,me to time, no exceptions.
Try to keep it in mind for the future. -
Having trouble installing .atn files in PSE10 Mac version
I have downloaded a .atn file from the Net and dropped it into the Actions Folder in the finder, restarted PSE 10, but I am unable to find the Action in the Actions Panel. Any help would be much appreciated.
What does the documentation say?
The best is maybe to contact them: http://www.misterretro.com/contact.html for more info.
I recall that the plug-ins overlays huge textures, (they are not procedural, and one could see repeating textures, if used on a huge image... but AFAIK, you launch it from the regular menu. -
[SOLVED] Is anyone else having trouble sizing fonts in Xfce 4.6?
There are very limited options in Xfce 4.6 for me to adjust fonts; mostly there are options to adjust icon font size (I don't use icons) & the Title font, which I can adjust.
I have looked through everything in my ~.config/ & see nothing, I think that what I may have had has been deleted in the upgrade?
The new xfconf system offers me nothing to manually configure?
I really am lost as to how to get my fonts back to their large size which suits my 24" 1920x1200 screen resolution?
When I go to my Arch/Openbox setup which uses the xfce4-panel it suffers from the tiny fonts also, even though Openbox Configuration Manager has all the font settings still listed as I desire them to be.
Firefox even has tiny menu & tab fonts, that remain beyond my adjustment.
I fear that if I downgrade Xfce I will still inherit the current settings.
This upgrade has made my computer very hard for my eyes.
Does anyone know the solution to this problem?
Thanks in advance for your help.
Last edited by handy (2009-03-01 02:38:32)Ok, the problem is now solved, as follows:
On my straight Xfce4 DE I had to turn off the Custom dpi (which had been set at 96) in the Settings; Appearance config' & restart X, & at a quick glance, it looks like things are as they should be.
In the Arch/Openbox/xfce4-panel system I use, there was still the problem: What I found was that the lxappearance GUI config' tool, (which one of a few that I use) had its font sizes set to 10?
So I changed them to the 20 I normally use & everything now looks good here too.
I hope this lot helps someone else, as it took me at least 2 hours to get past it.
Last edited by handy (2009-03-01 02:45:15) -
Hello! Need help! Having trouble accessing photos from Adobe Photoshop Album Starter Edition 3.0, I had a free trial but never registered the program because I was not using it. The other day I was taking pics off a Canon camera, & they automatically loaded into that site. I selected cancel several times, but the program did not respond. Once they completely loaded in, the program asked if I wanted to erase photos from the camera, I selected no but it started erasing them, I was able to stop it but 44 were erased off the camera. I can see the photos in the program but can not access them since I never registered. I tried to register now but received email saying that program has expired. So how do I get my photos? Please help! The photos are not mine, I was loading them from a friends camera, & they are important vacation memories to her! Thanks! Ruth
When you click on one of the thumbnails do you see a blank window where the full sized image? Or do you see this in the window:
In either case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
"Memory Sizing" error on Sun Fire V65x
Hello.
I have some trouble with my old Sun Fire V65x and i hope that you guys can help me out.
I had 2,5GB RAM installed in my server, working flawless. 2 x 256MB and 2 x 1GB modules. 256-modules in Bank 1 and 1GB´s in Bank 2.
To get rid of the boot up warning of wrong memory configuration i moved the 2 1GB modules to bank 3 (as stated in the manual) but that was when the problem started.
In this configuration the server won't go to POST, i tried moving the 1GB modules around between bank 1, 2 & 3 without any result.
The server will not go to POST. No beeps, no nothing. When turning the server on line it starts up, the fans starts running on at maximum speed and that's all, no picture and no POST and the system warning LED turns to red. After a couple of minutes in this state the fans slow down for a couple of seconds and then back to 100% (repeating cycle)
The POST diagnostics LEDs at the back of the main board indicates POST code 13h, "Memory sizing". The main board does not report any defective DIMMs, also worth mentioning is that the 2 256MB DIMMs are working flawlessly in all banks.
I have tried:
Resetting the memory config in BIOS (using the 2x256 DIMMs and then installing the 2 1GB modules.
Moving the memory modules around between different banks, both alone and with the 2 256MB DIMMs present.
Clearing the CMOS settings.
Searching manuals and Google for hours without answer to my problem or what "memory sizing " means in this situation.
System:
Sun Fire V65x
1 CPU
If anyone know the answer to my dilemma and are willing to help me, i would be really grateful.
Sadly i do not have the possibility to test the memory modules in another system.
Best regards. Erik Järlestrand, Sweden.Hardware. A reboot will probably not do anything. From what I can tell, it's a CPU cache problem. If you do anything, shut the system down completely, turn the power off for a minimum of 20 seconds to let any residual electricty go away, the turn it back on. If the problem returns, you'll most likely need to either get a new CPU module or a new V100. I don't know if the CPU can be removed from the V100 motherboard, but since there are jumper settings for the speed I would assume that you can.
-
[nForce]: Trouble Shooting Guide V1.6a
Hello.
Here is a guide to help solve some problems with K7N2 motherboards.
Problems arise in systems because some components do not work as they should.
Typical issues found with these boards consist of Non-nForce2 Approved RAM & a weak power supply. Other issues could be a cpu won't run at its rated fsb speed or an incorrectly mounted cpu cooler.
Sound problems - too many or incorrectly placed metal standoffs, bad drivers.
Windows won't install or you get a file read error - Incorrectly mounted CPU heat sink, RAM or power supply (PSU).
I've listed some instructions below to help those users that need a basic comprehensive guide to troubleshoot their systems with. Please read through the entire guide prior to posting for help on the forum.
Before you start doing anything, remove the power cord and make sure that you have touched the metal case of your system. This is called "Grounding yourself" and if you don't you could damage your system due to static discharge!
Thanks to Arioch and Dragon60 for comments on this.
1) BIOS/Startup POST reports wrong cpu or frequency
Check if jumper j10 and j11 are set to safemode and also check fsb settings in bios. If the jumpers are set to safe mode set them to normal, this is found in your motherboard manual. The jumpers vary with motherboards and manufacturers.
SafeMode sets cpu and memory to 100mhz.
Both memory and cpu are double pumped.
Data is clocked on the rise and fall of each clock cycle.
That means that 100mhz real frequency is 200mhz virtual frequency.
This is NOT without error and so your results may vary a little.
Non-Delta supports all cpu up to fsb 333
Delta supports all Socket A cpu
Duron upto 1300MHz = 100MHz (=200DDR)
Duron from 1400MHz = 133MHz (=266DDR)
Athlon B type = 100MHz (=200DDR)
Athlon C type = 133MHz (=266DDR)
Athlon XP - C type = 133MHz (=266DDR)
Athlon XP - D type = 166MHz (=333DDR)
Athlon XP - E type = 200MHz (=400DDR)
Support for new Duron 1400, 1600, 1800 with 266Mhz FSB (applebred)
The following boards support them:
(If a board is not on the list then it's not supported!)
-K7N2 6570 V1.0
-K7N2G-L 6570 V1.0
-K7N2G-ILSR 6570 V1.0
-K7N2 Delta 6570 V1.0
-K7N2GM-L 6777 V1.0
Thanks to DeathStalker
The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
How to check which cpu you have:
http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Electrical_Specification_Rev04_ENG.pdf
2) Over temp CPU
Is the Heat Sink and Fan rated for the CPU?
The CPU Heat Sink could be mounted wrong! Carefully remove it and check it. It can and will fit 2 ways but ther is only 1 right way. Examine the installation very carefully!
The Heat Sink has a recessed edge that has to be installed over the ridge (higher part or bump) of the socket. If installed backwards then it won't cool the entire area of the processor 'die' and could cause it to burn, thus killing it, or give you trouble as outlined in this guide.
Make sure that you use a QUALITY Thermal Compound/Paste and DO NOT reuse old compound! Note that some Heat Sinks are shipped with Thermal Pads, these are ok for some but will not give you the best heat transfer that a quality paste will.
Below are three images, the first two are incorrect, the last is correct.
Again..It is important to match the notch or step in the heatsink to the socket or it will not seat properly, causing immediate shutdowns, and ultimately damage your CPU.
If you use too much Silver based Thermal Compund you risk shorting the bridges on the CPU. This could cause damage to the CPU itself so use sparingly! If you feel that you've used too much then clean the die and substrate (the brown or green fiberglass material that the die is mounted on) and re-apply. Orange Clean TM is excellent for cleaning any type of thermal compound from a processor. Isopropyl Alchohol is ok but may leave traces of silver on the substrate. Using a 10X eye loupe will ensure that no traces of silver are shorting any bridges together after cleaning. DO NOT clean your processor while it rests in its socket on the motherboard. You run the risk of cleaner mixed with compound and dirt settling into your socket and that will cause further problems.
Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may dissolve some parts. Especially the coating on capacitors and resistors.
Silverbased compounds are not recommended by most manufacturers and if any traces are detected by them from an RMA'd processor they will usually void the warranty!
The latest AMD XP CPU's (XP-2000 and above) require a copperbased heatsink because their die are smaller and generate far more heat per square centimeter than the "old" CPU's did.
a)How to check the Heat Sink before taking it off:
There is a simple way to check the Heat Sink without taking it off. You do this by first checking your idle temp with SpeedFan or MBM, it should be below 50-55C.
Download Prime95 and run torture test for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
If it still goes up or the system crashes, there is a chance that you've mounted the heat sink incorrectly.
If your system can't run this check, (i.e. freezes or crashes) try setting your FSB to 100. Try to run the test again. If it still fails to run it could well be that the heat sink is mounted wrong or your power supply doesn't have enough power.
You cant check if the heatsink only has partial contact with the CPU die by looking on temperature monitor programs. The heatsink needs to be removed to see that.
If, after reading the guide regarding CPU Heat Sinks, you don't understand what we are talking about, then refer this link: AMD CPU & Cooling guide
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23986.pdf
3) Power Supplies
Most common cheap 300-350W power supply units (PSU for short) can't handle an XP-1700 or above, try a better one to be sure.
Make sure your PSU has 200W combined on the +3.3v & +5V rails and that the +3.3V rail is rated for 20A (A = Amps or Amperage) or above. This should be enough for most systems.
On the latest boards the +12V rail has become very important too, expecially with AMD ThunderBird & above CPU's. Make sure your PSU can supply 16A or more.
Alway's make sure you have a decent PSU, it never fails to spend a bit more on that part!
Borrow a bigger one from a friend if you are not sure.
Here's a good post on choosing the right power supply:
Choosing The Right Power Supply
This is the bare minimum that you should see on a PSU running an AMD processor. Intel is a bit more forgiving in some cases but with the amount of devices we use these days this minimum is a good guidline:
+3.3V - 28A or better
+5V - 35A or better
+12V - 16A or better
Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!! Do NOT trust the 300W or 400W rating on them!!! Q-Tec is about the worst of them all!!
4) Metal Stand-offs
Sometimes we are all a bit careless when it comes to changing a motherboard and forget to look at the layout of the stand-offs (those little silver or brass pieces that the screws screw into to hold the motherboard in the case) that are left from the old motherboard. Some motherboards use more than others thus some overlook the 'extra' one and mount that new board and never know the difference. Until they try to start their new baby up!
Remove the board and check for to see if you have too many of them by counting the holes or screws that you took out and then count the number of stand-offs you have in the case. Remove any uneeded stand-offs then remount your motherboard. Having 'extra's' can short out circuitry and cause all sorts of problems most of which are audio related.
Here are what typical stand-offs look like:
5) Sound
Two types of audio chipsets are used in these boards:
a) The -ILSR version uses Soundstorm and has drivers supplied from MSI or nVidia.
b) The -L version uses RealTek sound and has drivers supplied by MSI and Realtek.
There have been a lot of issues regarding the -L board and its drivers supplied by MSI. Realtek drivers seem to repair these issues and can be found here:
www.realtek.com.tw
Follow the ALC650 link.
6) RAM
Most of the issues involving these boards have been memory related. For various reasons cheaper generic memory doesn't run with nForce2 chipsets well and you should get nForce2 Approved RAM. Here is a link to nVidia's compatibility list as well as a list of what has worked for some:
Good Memory Choices for ALL K7N2 nF2 released boards
It's not a good idea to try to run DDR266 RAM when you have a 333FSB CPU, get DDR333 ram of decent quality.
If you think that you're having RAM issues then replace the ram with another brand to see if it fixes it or borrow some from a friend to check. Make sure it isn't cheap quality RAM or what you borrow isn't cheap quality. You can run to the local CompUSA (if you live in the USA that is) and buy some better quality RAM and return it later if you find that it isn't the problem.
DDR ram speeds:
Duron up to 1300/Athlon-B = 100FSB = PC-1600 = DDR200
Duron from 1400 = 133FSB = PC-2100 = DDR266
Athlon-C/XP up to 2600 = 133FSB = PC-2100 = DDR266
Athlon XP D-type and above = 166FSB = PC-2700 = DDR333
Athlon XP E-type and above = 200FSB = PC-3200 = DDR400
Set Fsb / Dram Ratio to 1:1 that means that the memory is working at the same speed as the fsb does.
Higher DDR speeds are only a must if you try to overclock. You can use faster RAM on a slower system and the motherboard bus will switch down in speed accordingly. The speeds given above are what should be used as a minimum, otherwise you're creating a serious bottleneck of data from the RAM.
Use a decent RAM testing utility such as Memtest86 if you suspect RAM is faulty. Typical failures of RAM include but are not limited to:
a) BSOD (Blue Screen of Death!)
b) Data Corruption
c) Machine won't cold boot
Try your system always with 1 RAM module at a time to see if you have a bad module. Swap modules if you have more than 1 to see if one or the other is bad. When upgrading remeber that adding more modules can give you trouble too. Especially if you mix manufacturers. Some sticks just won't work in pairs and some fail when you put 3 or more in the system. When you want to use 3 sticks, make very sure you use the nVidia tested and approved modules, they are your best chance that they will work without problems.
If still nothing try to seat the ram in another slot, sometimes they work better in another slot.
Thanks boost
Or raise the RAM voltage a little but be careful doing this! Sometimes this works when you have a lot of ram in the system.
7) BIOS
Sometimes when we play with our BIOS settings and set something wrong in it or set something incompatible with our hardware this causes the motherboard to not boot up. Sometimes they come from the factory that way as well. If so then clear the CMOS and start with the default settings. If it works try setting ONLY A FEW SETTINGS at a time and nothing more! If it works then go further from there a couple of settings at a time.
There are issues when changing VCORE and it gets stuck.
There are 3 ways to work around this issue.
1. Updating to the latest bios seems to fix it most of the time.
2. Clear CMOS, change VCORE in the BIOS, save changes then reboot and it should be changed.
3. Change VCORE in BIOS, save changes, turn off pc then disconnect PSU from wall outlet by either disconnecting the power cord or use the switch on the backside of the psu if there is one. Reconnect the power cord or turn the switch on again. Boot up the system, go into the BIOS and check under pc health to see if it has changed.
For RAID boards only!!
If you recieve a message at boot saying:
No Hard disk/drive present...BIOS will not be installed...
or something comparable, it means that there are no drives connected to the raid controllers and it's not installing the drivers needed to support the function of that particular device FROM BIOS ONLY! This is nothing to worry about and all of the other functions of your machine should work properly.
Modded bios to fix problems when using multiplier 10 and 10.5 and also to be able to use a higher FSB than with the MSI bios.
http://www.nforcershq.com/forum/viewtopic.php?t=46052
8) Clearing the CMOS chip
Disconnect the system power cord and push the case power button to drain all remaining power in the psu for approximately 15 seconds
Then move jumper jbat1 and wait 10 seconds and move it back to the original position. You should ensure that the jumper has metal inside of it when removed, sometimes (rarely) they don't. This process resets or clears the CMOS chip and is shown in most motherboard manuals.Now connect the power cord and restart your system.
Some motherboards require that the battery must be removed for 20 minutes before putting the battery and jbat1 back for the CMOS chip to be cleared.
***Starting your K7N2 Delta2 at default settings***
By "labtech1"
As some of you will be aware there is no safe mode jumper J10 on the K7N2 Delta2 series of boards. This has been replaced by the "insert" key method as used by Abit and Epox. To start your board at its default settings following an unsuccessful overclocking attempt you need to do the following using a ps2 keyboard. Turn off your machine and disconnect from the mains or turn off the switch on the back of the power supply. Press the front panel power switch several times to discharge any charge remaining in the power supply capacitors. Reconnect the power by plugging into wall socket or turning on psu power switch. Press and hold down "insert" on the keyboard and press the case front panel power switch. If you are successful it should start the cpu and memory at 100Mhz FSB. If it does press "delete" to reenter the bios to change your settings to known safe settings. Good luck.
9) Harddisks
If your hard drive is giving you problems:
Western Digital (WD) drive's are jumpered somewhat strange compared to others:
No jumper = Stand-Alone drive with no other drive attached to the cable.
Jumper master = Use this setting on your main drive if you have a slave drive installed in your system.
Jumper slave = Use this setting if you have a second hard drive installed in your system.
Cable Select - the preferred jumper setting
If your Hard Drive is doing weird things:
Make sure you have connected the color-coded connectors to the color-coded connectors on the motherboard and connect the other END of the cable to the hard drive. The middle connector can be left unattached without problems if not needed.
Not all motherboards have color-coded connectors.
IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
Run drive fitness test (DFT)
Maxtor also has its own version of hard drive check for their drives and is available from their website.
Any brand of hard drive can have problems so check the manufacturer website to see if there is a testing utility to use to make sure they are ok. Hard drive failures can cause some of the strangest problems with computers and should be checked via the Event Viewer of your Operating System or using the mfg's utility. Sometimes the Event Viewer will give you clues that you have bad sectors leading you to a potential hard drive failure. You could also find IDE/SCSI controllers that are suspect by looking there as well. Win9x and ME DO NOT have Event Viewers.
Alway's be sure your harddisk is in tip-top shape! If you suspect that it's not, replace it to verify.
IDE devices and hard drive guide (Written by Assaf & Bas)
IDE devices and hard drive guide(Written by Assaf & Bas)
To enable a hard drive over 137GB in Win2000 edit this registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
"EnableBigLba"=dword:00000001
The K7N2G & Delta -ILSR boards support 2 IDE Devices on IDE 1 & 2, 1 IDE hard drive on IDE3 and 2 SATA drive's on the SATA Ports.
There is a modded bios that allows 2 drives on IDE3. USE THIS AT YOUR OWN RISK!!! Here is a link to it:
http://www.nforcershq.com/forum/viewtopic.php?t=27626&highlight=
Harddisk/power LED not functioning:
If your Hard Drive or Power LED doesn't work try turning the plug around on the motherboard connector. Some manufacturers don't mark or wire the LED cables properly and the LEDs will only work when + and - is correct.
Hard drive LEDs do not work with SATA drives but O&O Drive LED opens a little window and there you can see when a harddrive or cd is accessed. Works on both ide and sata drives.
10) Floppy Drives
If your floppy drive doesn't work or the LED stays on all of the time make sure the floppy is set correctly in the BIOS because the BIOS doesn't autodetect a floppy drive.
Check the cable making sure that the twist in the cable is at the floppy-drive side and flip the connector at the around. If it stays on after that or you still can't read a floppy disk try another drive or a different manufaturer type drive.
11) USB Ports
USB 2.0 ports are supported ONLY in Win2000 w/SP3 and XP w/SP1. Update your OS from Windows Update and let the OS install the ports after reboot and they should work.
If your USB ports aren't working:
Check in the BIOS if the ports are enabled. If you're using the front USB ports of your case check to see if all of the wires are connected properly.
There are 4 wires for each USB channel.
In some manufaturer's cases they are supplied with a wire called USBOC. Don't connect this as it can cause problems.
Also different mfg's mark the wires with different names so the basic nomenclature would be something like this:
+5v = +VCC
-D = -USB
+D = +USB
Note: Normally the cables are marked as +USB1 or -USB1, +USB2 or -USB2 and so on...please ensure that all of the 1's are together and all of the 2's are together.
12) Replacing parts and the system won't boot after
It's never a good idea to replace stuff like CPU and ram without taking the board out of the case. But if you do so please support the board because if you don't you might bend the board a little and cause trace breakage or component connections to the board to crack or break causing a bad contact. Always support the board when you replace components no matter what!
Also make sure your system is compatible with any replacement component. For example your PSU may not be able to handle a video card upgrade from a GeForce2 440MX to a GeForce4 Ti-4600 because the +12v rail is too low or the motherboard isn't rated to output the proper voltage to the AGP port.
If you have parts that work in another computer with a different chipset this DOES NOT mean they will work with the nforce2 chipset.
13) Graphics Card
If there is stability problem and/or can't use agp 8x then update to the latest bios and it should work. Also try to disable the 8x feature of the motherboard in the BIOS. If neither of these work then you may have a PSU that is under-powered and needs to be replaced. You could also have a faulty video card, AGP port on the motherboard among other things. If you have to disable the 8x feature in the BIOS then there is still a problem even if the card starts working. That may mean the motherboard is bad. Also use the latest drivers available from the respective manufacturer and don't forget to uninstall the old drivers first!! There is a sticky post in the VGA forum that details this process.
14) Checking the power supply
Don't do this if you don't know what you are doing!
a) Disconnect the power supply.
b) Orient the 20-pin power connector with the clip up.
c) Locate pin 4 and pin 8 top row, mostly green and black wire. (Usually the PSU manufacturer will have a drawing labeling the pins on their website)
d) Use a wire to short them (or better a 12V test lamp).
e) Now connect the power cord and the fan inside the power supply should start spinning. If it doesn't your power supply might be dead.
15) Windows
a) If you find that Windows2000/XP won't run stable:
Try to disable APIC and install again. Not all drivers/devices like the APIC.
b) Windows2000/XP won't install USB 2.0:
Install the latest service pack using Windows Update (SP3 Win2000 or SP1 WinXP). Windows should detect the USB ports on reboot and install the drivers for them. They should work now but if not you could have a faulty motherboard.
If you use a current or slipstreamed copy of Win2K or XP with the latest service pack they include these new drivers. This download will no longer be available on Windows Update.
USE THESE AT YOUR OWN RISK!!!
Slipstreaming Win2K with Service Packs and Creating a Bootable CD:
http://old.bink.nu/bootcd/
Slipstreaming Windows XP Service Packs and Creating a Bootable CD
http://www.windows-help.net/WindowsXP/winxp-sp1-bootcd.html
16) Raid
Configure a raid array:
After you have connected 1 or 2 hard drives to your Raid IDE port(s) press CTRL + F during boot and create a raid array.
It is possible to have 2 raid arrays working at the same time.
To boot from a raid array set SCSI as the first boot device.
To install windows on a raid array you have to press F6 to load raid drivers during the initial install of windows. This will be repeated during Windows desktop installation of drivers because the initial drivers are only loaded to memory during this initial install allowing the Windows installation program to access the raid drives. A default driver is loaded at bootup so that the drives can be accessed until the real drivers are loaded from the MB disk.
Raid 0 sets up striping which gives more performance for applications. Raid 1 sets up mirroring which gives drive security by duplicating the primary drive to the secondary drive.
When using two different sized drives in a raid array, the larger drive is forced to only use the amount of disk space that the smaller drive provides.
nForce 2 raid FAQ
(Mostly by Wonkanoby)
The third IDE only works with harddrives not optical drives such as CD,DVD. It only supports one drive.
You must create an array first, weather you are using 2 drives or just one
or nothing will happen .
You must also have a 3.5 floppy with the appropriate drivers handy.
INSTALLATION
To install raid as a boot drive.
Control + F and make the array.
Set SCSI second to cdrom in boot order.
Boot to xp cd and hit F6 as it prompts you to do right at the beginning and then insert the floppy.
This will be repeated during Windows desktop installation of drivers because the initial drivers are only loaded to memory during this initial install allowing the Windows installation program to access the raid drives.
The rest of the format/install is all as normal.
Drivers for the raid can be found here.
http://us-download.msi.com.tw/support/dvr_exe/sata48N.exe
Promise PDC20376 Serial-ATA RAID Utility
http://us-download.msi.com.tw/support/dvr_exe/37653.exe
If you make a new floppy, unrar them.
Then copy every thing including the text files to the floppy.
(no text files, nothing happens)
MODDED BIOS
such as
http://www.nforcershq.com/forum/viewtopic.php?t=27626
There are several offering full RAID.
They add ability to have 2x drives on ide 3.
I'm skeptical running raid 0 with both on the same ide myself.
Now these you must get the bios and the drivers.
The drivers are not the same as those for the RAID MSI includes.
The drivers are linked on that BIOS page I have provided.
RAID 0, sets up striping, which gives more performance for applications.
RAID 1, sets up mirroring which gives drive security by duplicating the primary drive to the secondary drive.
When using two different sized drives in a RAID array, the larger drive is forced to only use the amount of disk space that the smaller drive provides.
17) Good Links
J*A*G'S *Updated* nForce Cooling Guide (written by JAG)
Suggestions on posting and getting better answers (written by GlennVidia)
Good Memory Choices for K7N2G- IL and ILSR Board (written by Bonz)
ati problem ,post vga card model and bios (written by Wonkanoby)
Powersupplies(Written by Bas)
Moan Guide (Written by Wonkanoby)
A few good websites to have around!!
The Freeware Thread
NFORCE 2 OVERCLOCKING AND MODDING GUIDES
Use these guides, including the content of this entire guide, at your own risk!
This forum and it's members, including MSI, assume no liability whatsoever!
Part One
Part Two
I am not an expert on computers so I have most likely forgotten a lot of things. Please send me a private message or email me and I will add it if it's applicable. If you feel that something here is in error then please contact me via the above as well.
I also want to thank everyone that helped put this guide together.
All Star Lineup!
Arioch
DeathStalker
maesus
ClarkKent57
boost
Assaf
Bas
Tweetyoost
Stygge
HansH
GlennVidia
RoganJosh
Bonz
Wonkanoby
Dragon60
[T-A]_Super_10
labtech1Hello.
Here is a guide to help solve some problems with K7N2 motherboards.
Problems arise in systems because some components do not work as they should.
Typical issues found with these boards consist of Non-nForce2 Approved RAM & a weak power supply. Other issues could be a cpu won't run at its rated fsb speed or an incorrectly mounted cpu cooler.
Sound problems - too many or incorrectly placed metal standoffs, bad drivers.
Windows won't install or you get a file read error - Incorrectly mounted CPU heat sink, RAM or power supply (PSU).
I've listed some instructions below to help those users that need a basic comprehensive guide to troubleshoot their systems with. Please read through the entire guide prior to posting for help on the forum.
Before you start doing anything, remove the power cord and make sure that you have touched the metal case of your system. This is called "Grounding yourself" and if you don't you could damage your system due to static discharge!
Thanks to Arioch and Dragon60 for comments on this.
1) BIOS/Startup POST reports wrong cpu or frequency
Check if jumper j10 and j11 are set to safemode and also check fsb settings in bios. If the jumpers are set to safe mode set them to normal, this is found in your motherboard manual. The jumpers vary with motherboards and manufacturers.
SafeMode sets cpu and memory to 100mhz.
Both memory and cpu are double pumped.
Data is clocked on the rise and fall of each clock cycle.
That means that 100mhz real frequency is 200mhz virtual frequency.
This is NOT without error and so your results may vary a little.
Non-Delta supports all cpu up to fsb 333
Delta supports all Socket A cpu
Duron upto 1300MHz = 100MHz (=200DDR)
Duron from 1400MHz = 133MHz (=266DDR)
Athlon B type = 100MHz (=200DDR)
Athlon C type = 133MHz (=266DDR)
Athlon XP - C type = 133MHz (=266DDR)
Athlon XP - D type = 166MHz (=333DDR)
Athlon XP - E type = 200MHz (=400DDR)
Support for new Duron 1400, 1600, 1800 with 266Mhz FSB (applebred)
The following boards support them:
(If a board is not on the list then it's not supported!)
-K7N2 6570 V1.0
-K7N2G-L 6570 V1.0
-K7N2G-ILSR 6570 V1.0
-K7N2 Delta 6570 V1.0
-K7N2GM-L 6777 V1.0
Thanks to DeathStalker
The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
How to check which cpu you have:
http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Electrical_Specification_Rev04_ENG.pdf
2) Over temp CPU
Is the Heat Sink and Fan rated for the CPU?
The CPU Heat Sink could be mounted wrong! Carefully remove it and check it. It can and will fit 2 ways but ther is only 1 right way. Examine the installation very carefully!
The Heat Sink has a recessed edge that has to be installed over the ridge (higher part or bump) of the socket. If installed backwards then it won't cool the entire area of the processor 'die' and could cause it to burn, thus killing it, or give you trouble as outlined in this guide.
Make sure that you use a QUALITY Thermal Compound/Paste and DO NOT reuse old compound! Note that some Heat Sinks are shipped with Thermal Pads, these are ok for some but will not give you the best heat transfer that a quality paste will.
Below are three images, the first two are incorrect, the last is correct.
Again..It is important to match the notch or step in the heatsink to the socket or it will not seat properly, causing immediate shutdowns, and ultimately damage your CPU.
If you use too much Silver based Thermal Compund you risk shorting the bridges on the CPU. This could cause damage to the CPU itself so use sparingly! If you feel that you've used too much then clean the die and substrate (the brown or green fiberglass material that the die is mounted on) and re-apply. Orange Clean TM is excellent for cleaning any type of thermal compound from a processor. Isopropyl Alchohol is ok but may leave traces of silver on the substrate. Using a 10X eye loupe will ensure that no traces of silver are shorting any bridges together after cleaning. DO NOT clean your processor while it rests in its socket on the motherboard. You run the risk of cleaner mixed with compound and dirt settling into your socket and that will cause further problems.
Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may dissolve some parts. Especially the coating on capacitors and resistors.
Silverbased compounds are not recommended by most manufacturers and if any traces are detected by them from an RMA'd processor they will usually void the warranty!
The latest AMD XP CPU's (XP-2000 and above) require a copperbased heatsink because their die are smaller and generate far more heat per square centimeter than the "old" CPU's did.
a)How to check the Heat Sink before taking it off:
There is a simple way to check the Heat Sink without taking it off. You do this by first checking your idle temp with SpeedFan or MBM, it should be below 50-55C.
Download Prime95 and run torture test for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
If it still goes up or the system crashes, there is a chance that you've mounted the heat sink incorrectly.
If your system can't run this check, (i.e. freezes or crashes) try setting your FSB to 100. Try to run the test again. If it still fails to run it could well be that the heat sink is mounted wrong or your power supply doesn't have enough power.
You cant check if the heatsink only has partial contact with the CPU die by looking on temperature monitor programs. The heatsink needs to be removed to see that.
If, after reading the guide regarding CPU Heat Sinks, you don't understand what we are talking about, then refer this link: AMD CPU & Cooling guide
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23986.pdf
3) Power Supplies
Most common cheap 300-350W power supply units (PSU for short) can't handle an XP-1700 or above, try a better one to be sure.
Make sure your PSU has 200W combined on the +3.3v & +5V rails and that the +3.3V rail is rated for 20A (A = Amps or Amperage) or above. This should be enough for most systems.
On the latest boards the +12V rail has become very important too, expecially with AMD ThunderBird & above CPU's. Make sure your PSU can supply 16A or more.
Alway's make sure you have a decent PSU, it never fails to spend a bit more on that part!
Borrow a bigger one from a friend if you are not sure.
Here's a good post on choosing the right power supply:
Choosing The Right Power Supply
This is the bare minimum that you should see on a PSU running an AMD processor. Intel is a bit more forgiving in some cases but with the amount of devices we use these days this minimum is a good guidline:
+3.3V - 28A or better
+5V - 35A or better
+12V - 16A or better
Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!! Do NOT trust the 300W or 400W rating on them!!! Q-Tec is about the worst of them all!!
4) Metal Stand-offs
Sometimes we are all a bit careless when it comes to changing a motherboard and forget to look at the layout of the stand-offs (those little silver or brass pieces that the screws screw into to hold the motherboard in the case) that are left from the old motherboard. Some motherboards use more than others thus some overlook the 'extra' one and mount that new board and never know the difference. Until they try to start their new baby up!
Remove the board and check for to see if you have too many of them by counting the holes or screws that you took out and then count the number of stand-offs you have in the case. Remove any uneeded stand-offs then remount your motherboard. Having 'extra's' can short out circuitry and cause all sorts of problems most of which are audio related.
Here are what typical stand-offs look like:
5) Sound
Two types of audio chipsets are used in these boards:
a) The -ILSR version uses Soundstorm and has drivers supplied from MSI or nVidia.
b) The -L version uses RealTek sound and has drivers supplied by MSI and Realtek.
There have been a lot of issues regarding the -L board and its drivers supplied by MSI. Realtek drivers seem to repair these issues and can be found here:
www.realtek.com.tw
Follow the ALC650 link.
6) RAM
Most of the issues involving these boards have been memory related. For various reasons cheaper generic memory doesn't run with nForce2 chipsets well and you should get nForce2 Approved RAM. Here is a link to nVidia's compatibility list as well as a list of what has worked for some:
Good Memory Choices for ALL K7N2 nF2 released boards
It's not a good idea to try to run DDR266 RAM when you have a 333FSB CPU, get DDR333 ram of decent quality.
If you think that you're having RAM issues then replace the ram with another brand to see if it fixes it or borrow some from a friend to check. Make sure it isn't cheap quality RAM or what you borrow isn't cheap quality. You can run to the local CompUSA (if you live in the USA that is) and buy some better quality RAM and return it later if you find that it isn't the problem.
DDR ram speeds:
Duron up to 1300/Athlon-B = 100FSB = PC-1600 = DDR200
Duron from 1400 = 133FSB = PC-2100 = DDR266
Athlon-C/XP up to 2600 = 133FSB = PC-2100 = DDR266
Athlon XP D-type and above = 166FSB = PC-2700 = DDR333
Athlon XP E-type and above = 200FSB = PC-3200 = DDR400
Set Fsb / Dram Ratio to 1:1 that means that the memory is working at the same speed as the fsb does.
Higher DDR speeds are only a must if you try to overclock. You can use faster RAM on a slower system and the motherboard bus will switch down in speed accordingly. The speeds given above are what should be used as a minimum, otherwise you're creating a serious bottleneck of data from the RAM.
Use a decent RAM testing utility such as Memtest86 if you suspect RAM is faulty. Typical failures of RAM include but are not limited to:
a) BSOD (Blue Screen of Death!)
b) Data Corruption
c) Machine won't cold boot
Try your system always with 1 RAM module at a time to see if you have a bad module. Swap modules if you have more than 1 to see if one or the other is bad. When upgrading remeber that adding more modules can give you trouble too. Especially if you mix manufacturers. Some sticks just won't work in pairs and some fail when you put 3 or more in the system. When you want to use 3 sticks, make very sure you use the nVidia tested and approved modules, they are your best chance that they will work without problems.
If still nothing try to seat the ram in another slot, sometimes they work better in another slot.
Thanks boost
Or raise the RAM voltage a little but be careful doing this! Sometimes this works when you have a lot of ram in the system.
7) BIOS
Sometimes when we play with our BIOS settings and set something wrong in it or set something incompatible with our hardware this causes the motherboard to not boot up. Sometimes they come from the factory that way as well. If so then clear the CMOS and start with the default settings. If it works try setting ONLY A FEW SETTINGS at a time and nothing more! If it works then go further from there a couple of settings at a time.
There are issues when changing VCORE and it gets stuck.
There are 3 ways to work around this issue.
1. Updating to the latest bios seems to fix it most of the time.
2. Clear CMOS, change VCORE in the BIOS, save changes then reboot and it should be changed.
3. Change VCORE in BIOS, save changes, turn off pc then disconnect PSU from wall outlet by either disconnecting the power cord or use the switch on the backside of the psu if there is one. Reconnect the power cord or turn the switch on again. Boot up the system, go into the BIOS and check under pc health to see if it has changed.
For RAID boards only!!
If you recieve a message at boot saying:
No Hard disk/drive present...BIOS will not be installed...
or something comparable, it means that there are no drives connected to the raid controllers and it's not installing the drivers needed to support the function of that particular device FROM BIOS ONLY! This is nothing to worry about and all of the other functions of your machine should work properly.
Modded bios to fix problems when using multiplier 10 and 10.5 and also to be able to use a higher FSB than with the MSI bios.
http://www.nforcershq.com/forum/viewtopic.php?t=46052
8) Clearing the CMOS chip
Disconnect the system power cord and push the case power button to drain all remaining power in the psu for approximately 15 seconds
Then move jumper jbat1 and wait 10 seconds and move it back to the original position. You should ensure that the jumper has metal inside of it when removed, sometimes (rarely) they don't. This process resets or clears the CMOS chip and is shown in most motherboard manuals.Now connect the power cord and restart your system.
Some motherboards require that the battery must be removed for 20 minutes before putting the battery and jbat1 back for the CMOS chip to be cleared.
***Starting your K7N2 Delta2 at default settings***
By "labtech1"
As some of you will be aware there is no safe mode jumper J10 on the K7N2 Delta2 series of boards. This has been replaced by the "insert" key method as used by Abit and Epox. To start your board at its default settings following an unsuccessful overclocking attempt you need to do the following using a ps2 keyboard. Turn off your machine and disconnect from the mains or turn off the switch on the back of the power supply. Press the front panel power switch several times to discharge any charge remaining in the power supply capacitors. Reconnect the power by plugging into wall socket or turning on psu power switch. Press and hold down "insert" on the keyboard and press the case front panel power switch. If you are successful it should start the cpu and memory at 100Mhz FSB. If it does press "delete" to reenter the bios to change your settings to known safe settings. Good luck.
9) Harddisks
If your hard drive is giving you problems:
Western Digital (WD) drive's are jumpered somewhat strange compared to others:
No jumper = Stand-Alone drive with no other drive attached to the cable.
Jumper master = Use this setting on your main drive if you have a slave drive installed in your system.
Jumper slave = Use this setting if you have a second hard drive installed in your system.
Cable Select - the preferred jumper setting
If your Hard Drive is doing weird things:
Make sure you have connected the color-coded connectors to the color-coded connectors on the motherboard and connect the other END of the cable to the hard drive. The middle connector can be left unattached without problems if not needed.
Not all motherboards have color-coded connectors.
IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
Run drive fitness test (DFT)
Maxtor also has its own version of hard drive check for their drives and is available from their website.
Any brand of hard drive can have problems so check the manufacturer website to see if there is a testing utility to use to make sure they are ok. Hard drive failures can cause some of the strangest problems with computers and should be checked via the Event Viewer of your Operating System or using the mfg's utility. Sometimes the Event Viewer will give you clues that you have bad sectors leading you to a potential hard drive failure. You could also find IDE/SCSI controllers that are suspect by looking there as well. Win9x and ME DO NOT have Event Viewers.
Alway's be sure your harddisk is in tip-top shape! If you suspect that it's not, replace it to verify.
IDE devices and hard drive guide (Written by Assaf & Bas)
IDE devices and hard drive guide(Written by Assaf & Bas)
To enable a hard drive over 137GB in Win2000 edit this registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
"EnableBigLba"=dword:00000001
The K7N2G & Delta -ILSR boards support 2 IDE Devices on IDE 1 & 2, 1 IDE hard drive on IDE3 and 2 SATA drive's on the SATA Ports.
There is a modded bios that allows 2 drives on IDE3. USE THIS AT YOUR OWN RISK!!! Here is a link to it:
http://www.nforcershq.com/forum/viewtopic.php?t=27626&highlight=
Harddisk/power LED not functioning:
If your Hard Drive or Power LED doesn't work try turning the plug around on the motherboard connector. Some manufacturers don't mark or wire the LED cables properly and the LEDs will only work when + and - is correct.
Hard drive LEDs do not work with SATA drives but O&O Drive LED opens a little window and there you can see when a harddrive or cd is accessed. Works on both ide and sata drives.
10) Floppy Drives
If your floppy drive doesn't work or the LED stays on all of the time make sure the floppy is set correctly in the BIOS because the BIOS doesn't autodetect a floppy drive.
Check the cable making sure that the twist in the cable is at the floppy-drive side and flip the connector at the around. If it stays on after that or you still can't read a floppy disk try another drive or a different manufaturer type drive.
11) USB Ports
USB 2.0 ports are supported ONLY in Win2000 w/SP3 and XP w/SP1. Update your OS from Windows Update and let the OS install the ports after reboot and they should work.
If your USB ports aren't working:
Check in the BIOS if the ports are enabled. If you're using the front USB ports of your case check to see if all of the wires are connected properly.
There are 4 wires for each USB channel.
In some manufaturer's cases they are supplied with a wire called USBOC. Don't connect this as it can cause problems.
Also different mfg's mark the wires with different names so the basic nomenclature would be something like this:
+5v = +VCC
-D = -USB
+D = +USB
Note: Normally the cables are marked as +USB1 or -USB1, +USB2 or -USB2 and so on...please ensure that all of the 1's are together and all of the 2's are together.
12) Replacing parts and the system won't boot after
It's never a good idea to replace stuff like CPU and ram without taking the board out of the case. But if you do so please support the board because if you don't you might bend the board a little and cause trace breakage or component connections to the board to crack or break causing a bad contact. Always support the board when you replace components no matter what!
Also make sure your system is compatible with any replacement component. For example your PSU may not be able to handle a video card upgrade from a GeForce2 440MX to a GeForce4 Ti-4600 because the +12v rail is too low or the motherboard isn't rated to output the proper voltage to the AGP port.
If you have parts that work in another computer with a different chipset this DOES NOT mean they will work with the nforce2 chipset.
13) Graphics Card
If there is stability problem and/or can't use agp 8x then update to the latest bios and it should work. Also try to disable the 8x feature of the motherboard in the BIOS. If neither of these work then you may have a PSU that is under-powered and needs to be replaced. You could also have a faulty video card, AGP port on the motherboard among other things. If you have to disable the 8x feature in the BIOS then there is still a problem even if the card starts working. That may mean the motherboard is bad. Also use the latest drivers available from the respective manufacturer and don't forget to uninstall the old drivers first!! There is a sticky post in the VGA forum that details this process.
14) Checking the power supply
Don't do this if you don't know what you are doing!
a) Disconnect the power supply.
b) Orient the 20-pin power connector with the clip up.
c) Locate pin 4 and pin 8 top row, mostly green and black wire. (Usually the PSU manufacturer will have a drawing labeling the pins on their website)
d) Use a wire to short them (or better a 12V test lamp).
e) Now connect the power cord and the fan inside the power supply should start spinning. If it doesn't your power supply might be dead.
15) Windows
a) If you find that Windows2000/XP won't run stable:
Try to disable APIC and install again. Not all drivers/devices like the APIC.
b) Windows2000/XP won't install USB 2.0:
Install the latest service pack using Windows Update (SP3 Win2000 or SP1 WinXP). Windows should detect the USB ports on reboot and install the drivers for them. They should work now but if not you could have a faulty motherboard.
If you use a current or slipstreamed copy of Win2K or XP with the latest service pack they include these new drivers. This download will no longer be available on Windows Update.
USE THESE AT YOUR OWN RISK!!!
Slipstreaming Win2K with Service Packs and Creating a Bootable CD:
http://old.bink.nu/bootcd/
Slipstreaming Windows XP Service Packs and Creating a Bootable CD
http://www.windows-help.net/WindowsXP/winxp-sp1-bootcd.html
16) Raid
Configure a raid array:
After you have connected 1 or 2 hard drives to your Raid IDE port(s) press CTRL + F during boot and create a raid array.
It is possible to have 2 raid arrays working at the same time.
To boot from a raid array set SCSI as the first boot device.
To install windows on a raid array you have to press F6 to load raid drivers during the initial install of windows. This will be repeated during Windows desktop installation of drivers because the initial drivers are only loaded to memory during this initial install allowing the Windows installation program to access the raid drives. A default driver is loaded at bootup so that the drives can be accessed until the real drivers are loaded from the MB disk.
Raid 0 sets up striping which gives more performance for applications. Raid 1 sets up mirroring which gives drive security by duplicating the primary drive to the secondary drive.
When using two different sized drives in a raid array, the larger drive is forced to only use the amount of disk space that the smaller drive provides.
nForce 2 raid FAQ
(Mostly by Wonkanoby)
The third IDE only works with harddrives not optical drives such as CD,DVD. It only supports one drive.
You must create an array first, weather you are using 2 drives or just one
or nothing will happen .
You must also have a 3.5 floppy with the appropriate drivers handy.
INSTALLATION
To install raid as a boot drive.
Control + F and make the array.
Set SCSI second to cdrom in boot order.
Boot to xp cd and hit F6 as it prompts you to do right at the beginning and then insert the floppy.
This will be repeated during Windows desktop installation of drivers because the initial drivers are only loaded to memory during this initial install allowing the Windows installation program to access the raid drives.
The rest of the format/install is all as normal.
Drivers for the raid can be found here.
http://us-download.msi.com.tw/support/dvr_exe/sata48N.exe
Promise PDC20376 Serial-ATA RAID Utility
http://us-download.msi.com.tw/support/dvr_exe/37653.exe
If you make a new floppy, unrar them.
Then copy every thing including the text files to the floppy.
(no text files, nothing happens)
MODDED BIOS
such as
http://www.nforcershq.com/forum/viewtopic.php?t=27626
There are several offering full RAID.
They add ability to have 2x drives on ide 3.
I'm skeptical running raid 0 with both on the same ide myself.
Now these you must get the bios and the drivers.
The drivers are not the same as those for the RAID MSI includes.
The drivers are linked on that BIOS page I have provided.
RAID 0, sets up striping, which gives more performance for applications.
RAID 1, sets up mirroring which gives drive security by duplicating the primary drive to the secondary drive.
When using two different sized drives in a RAID array, the larger drive is forced to only use the amount of disk space that the smaller drive provides.
17) Good Links
J*A*G'S *Updated* nForce Cooling Guide (written by JAG)
Suggestions on posting and getting better answers (written by GlennVidia)
Good Memory Choices for K7N2G- IL and ILSR Board (written by Bonz)
ati problem ,post vga card model and bios (written by Wonkanoby)
Powersupplies(Written by Bas)
Moan Guide (Written by Wonkanoby)
A few good websites to have around!!
The Freeware Thread
NFORCE 2 OVERCLOCKING AND MODDING GUIDES
Use these guides, including the content of this entire guide, at your own risk!
This forum and it's members, including MSI, assume no liability whatsoever!
Part One
Part Two
I am not an expert on computers so I have most likely forgotten a lot of things. Please send me a private message or email me and I will add it if it's applicable. If you feel that something here is in error then please contact me via the above as well.
I also want to thank everyone that helped put this guide together.
All Star Lineup!
Arioch
DeathStalker
maesus
ClarkKent57
boost
Assaf
Bas
Tweetyoost
Stygge
HansH
GlennVidia
RoganJosh
Bonz
Wonkanoby
Dragon60
[T-A]_Super_10
labtech1 -
I'm having trouble accessing my iPhoto photos when, for instance, trying to attach them to an email. When I browse through my computer I find iPhoto, but I can't double-click it to get to the individual photos in my library.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.
Maybe you are looking for
-
ITunes stops responding when iPod is connected to the computer
This weekend I switched from Windows Vista to Windows 7 with a custom installation of Windows 7 to completely replace Vista (I did not do the upgrade that lays 7 on top of the Vista installation, and I did completely remove the windows.old folder tha
-
TS1717 Im new to itunes so this might be a simple answer but...
Im new to itunes so this might be a simple answer but...I downloaded 20 songs a few days ago and the last 45-60 second ds of more than half didn't download. When playing the song it will kirt move to the next song. How can I get it to download again
-
I want to display the bluetooth headset list.
- I want like this screen. Question 1. How do get change audio source?? 2. Could you tell me? public api about BluetoothManager
-
Is there a maximum number of pictures that can be uploaded to create a photo book?
Is there a maximum number of pictures that can be uploaded to create a photo book? I can't seem to drag anymore pictures to my current project.
-
Hi, Maybe this is correct behaviour, but for me it's quite strange. I create new project (ADF+UIX), create Business Components From Tables (only one small table). Then I create new DataPage on struts diagram and edit this page (I choose uix as type o