Re:Skip validation while creating New Record

Hi all,
I am using Jdeveloper 11.1.1.7.0
I have one adf table and one createInsert button in .jspx page
If first time when i click on createInsert Button it is working fine but again i click on createInsert button without entering any mandatory field it is giving an error message like enter a value.
So how to skip that one,Can anyone help me to resolve it
Thanks,
Syam

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Similar Messages

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Set atribute value from session bea while creating new record using ADF BC

hi,
i want to set the value of new record attribute from session bean while
using ADF BC using creation form. how can i set the value of a perticular arribute of a record to the value stored in session bean.

Chapter 9 in the ADF Developer's Guide for Forms/4GL Developers (available on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html ) describes how to accomplish this along with other typical kinds of programmatic business logic.

Creating new records while querying existing record

Hi,
I have one master - detail form.
First i created 1 record. Request ID is the primary key. Now request id generated. For ex.: 10
Request Id, date, requestor , location, status fields are in header block.
In lines block, i hv some other fields.. and one field called 'Activity'.
While creating first record, the activity will be 'New'.
Then i'll query the record '10'.
when i'm changing the activity 'New' into 'Upgrade', it should create new record with new request ID.
How to do this?
I hv written procedure that, i'm taking field values to local variables. Then assigning the local variable values to field values.
It is not creating as new record. It overwriting the existing record with new values. Existing record is missing.
Pl. give steps.
Thanks
Kavi

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

Imported Form and sub-form from another database. Sub-form not creating new records tied to parent form's data.

I have imported all objects from an old access db (.adp file) into a new db (.accdb). All of my data lives in sql server so I have added all the tables and views to the .accdb as linked tables. My forms all connect to data, but I am having issues
with a sub form. The sub form does not allow for creation of children records tied to the parent record the way the old db did/does.
Correct - old format .adp file (notice the empty second record in sub-form with the defaulted date of today's date):
Incorrect - new .accdb file (notice the lack of empty second record in sub-form like above):
If I click the create new record icon in the bottom of the subform, it creates a completely blank record not tied to the parent record (fields blacked out in screen shots above). When using this button all parent record fields are blank.
I have also verified the child table used in the sub-form has a valid Fky relationship to parent table used in the parent form.

Have you checked each forms 'Filter' property (in Design view) to make sure they are blank and that each forms 'Filter On Load' property to make sure it is set to 'No'? Also, you might try inserting the following commands in each forms On
Open event:
DoCmd.RunCommand acCmdRemoveAllFilters
DoCmd.ShowAllRecords
If you can open each forms Record Source and they are showing that new records are able to be entered (the new record * is showing at the bottom of the recordset), then check each forms On Load and On Open events to make sure there is no filtering.
In addition, check any macro or VBA commands behind the button that opens the main form to make sure there is no SQL filtering in the DoCmd.OpenForm command.
If one of the forms Record Source does NOT allow new records, then you will need to change that Record Source so the new record * indicator shows.
Out of ideas at this point.

In oracle forms how to restrict creating new record

I have a multi record block, I dont want to create new record. If I use the down key after the last record control is moving to next record. I dont want this to happen. I want to scroll between first and last record.
Can anyone tell me ?

Look up the Forms Help for 'system.last_record'.
I'd code the KEY-DOWN trigger on the block as...
IF :System.Last_Record = 'TRUE' THEN
Bell;
Message('You are on the last row');
ELSE
down;
END IF;
This avoids any processing or validation work being done on leaving the current record or creating the new record.

Duplicate address check for while creating New accounts

Hi,
While creating new account for checking postal address and duplicate records i am getting following error message
The address is correct as entered. Display the Address Reviewer Screen
currently i am using CRM 7.0
Thanks & Regards
Kishore Kumar

no replies

While creating info record mandatory fields are disable .

hi all,
while creating info record some mandatory fields are disable (valid to) in condition what i can do to procede further?
how i fill data in that field?

Hello,
I think that is set as a mandatrory field. You can give any values in days here. Enter 1 or 2 and proceed.
Prase

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

Error while creating new release groups in PO release strategy

Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan

Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic     Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class     After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order     In this step four processes involved.o     Release Groupso     Release Codeso     Release indicatoro     Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group     In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code     In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator     In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy     *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh

SBO0001 error DBD:ORA12154 error while creating new connection

Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
Mike

Mike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark

Error while creating new client

Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babu

Hi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik

Re:Skip validation while creating New Record

Similar Messages

Maybe you are looking for