Re: Sound is very poor on MBP 2011, any solution?

Hi,
I have been trying to wach videos either through dvd or netflix, but sound quality is really poor. I have to use headphone, then only can hear the sound better.
Anyone having same problem? or any solution for this?
Thanks in advance.

Hello,
Yes.
I did following:
1) System Preference > Sound
2) Sound Effects > internal Speakers
I have kept output volume as maximum.

Similar Messages

  • Why is the signal at my home so much weaker than when I moved here in February 2013?  I only get one or two bars and very poor data service if any at all.

    Why is the signal at my home so much weaker than it was when I moved here in February 2013?  I get only one or two bars and very poor data service if any at all.  Calling to ask the question results in a vortex of questions that have little to do with the problem and no  resolution or answer.

    I have a Droid Ultra phone.  The signal reduction seems to only be in the general area of my home.  If I go downtown, the signal improves to what it once was at home.  Everything at my home is as it was when the signal was good, including cable TV service.  There has been no new construction in the area that I know of.
    Thanks for trying to resolve the issue.  Just this morning while trying to view web pages, I found that I could not load any.
    Ron

  • HT1688 My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution t

    My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution to this ?? It says that my iphone is in soft dfu mode and in the my computer > manage>device manager > it shows the apple (dfu mode) having some error sign indicating no software installed i am running windows 8 ..

    Jailbreaking iOS can't be discussed in this forum.

  • No sound or very poor one from front speakers T7900 system

    I have a T7900 system and sudenly I have no more sound or a very poor one from the front speakers (left and right). The others (central, rear and subwoofer are working fine). I tried all configurations posible and from the control panel but still no result.
    Anyone can help?

    Hi,
    Try swapping the front speakers with the others, this should tell you if the speakers are faulty. You might want to get in touch with support for further assistance on this.

  • HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer.  The sound still comes from the speakers.  Any solutions?

    The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds.  The sound still comes from the speakers and is not redirected to the head phone.  The port has never worked.  Any solutions?

    okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
    JB

  • When I select a menu item, the highlight is light blue and the item font color goes white. It is very difficult to read? Any solution?

    When I select Bookmarks, the menu item (Bookmarks) is highlighted in light gray color; and the letters of the work itself (Bookmarks) turns white. This same thing happens when you go into individual bookmark selections. It is very difficult to read. Are there any alternatives that can be set by the user?

    Are you using a standard Windows theme?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Imac 27" gets very hot.  Is there any solution

    I'm wondering if I should be concerned about the excessive temperature of my imac.

    Install a utility such as Temperature Monitor 4.94 or iStat Menus 3.22 or iStat Pro 4.92.

  • Pavilion 23xi has a very bright backlight and very poor contrast

    My Pavilion 23xi  has a contrast like screen of cheap price netbook, may be 1:140 may be 1:100.
    No any result after all attempt of ajastments:
    - no when contrast =100,
    - no when contast = 50
    -brigtness from 35 to 55 is comfort for me
    -gamma off
    -dynamic contrast off and on (small difference)
    -preset = text
    I can see only grey screen, it is not same to black!
    On this photo you can see the trouble (white balance of monitor is full correct, some blue copol is only photo's problem)
    What can I do without transportation to dealer (I live in Russia, very big country for comfort technical service)
    Engineer menu of HP 23xi is very poor, there is not any useful items to reduce the LED emmitance

    Hi Yuriry-Spb;
    I regret that you are still having difficulties.
    I am sending you a link on "Display Quality Issue"click here.
    If none of these steps resolved it and it is under warranty I would call technical support..
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
    Please let me know the results.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Hi since I put the new update on my ipad. The sound quality on the ipad is very poor and just wondering is there going to be a update to sort it out.thanks

    Hi since I put the new update on my ipad. The sound quality on the ipad is gone very poor it's sound very tinny. I just wondering if there is going to be a update to sort it out. Thanks

    Hello Tollykev,
    Thank you for using Apple Support Communities.
    It sounds like you have some audio issues with your iPad after the iOS 7 update.
    I want to recommend the following troubleshooting from the article named:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    Regards,
    Sterling

  • L505-S5990 Very poor sound.

    L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.

    golfnut10 wrote:
    L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.
    The L505-S5990 laptop (and other models in the L505 series line which use the Realtek HD audio drivers) have not been configured properly when they were initially shipped. This is a two step process.
    First, either update to the latest Toshiba audio drivers via the Toshiba Support web site, or by downloading the latest Realtek HD Audio drivers from the Realtek website.
    Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start -->  Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start -->  Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
    Once the drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however you may find the DVD and Audio CD audio levels are still low. No real fix for that issue yet from Toshiba other than to experiment with the various sound settings. 

  • C6 sound very poor

    HI,
    I just procured my Nokia C6  2 days ago, sound quality is very poor..cant even hear loud when mobile is ringing..
    any suggestions to increase sound ?

    check that volume level is set correctly ,you can check this in profiles ,also you can try using a loud mp3 tone if you wish dont forget to activate the profile your intending on using
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Hi I have 15" i7 2.4GHz 4GB/750GB Dec 2011. Anyone else finding battery time very poor?

    Charging seems to be okay and goes up to 100% with no problems.  When running on battery it seems to run down very quickly.  Typical was yesterday started at 97%.  I only typed 7 pages of word processing, a little bit of surfing and email and by late afternoon battery was down to 6%.  In between it was eother on standby or off. But over the few weeks I have had it the battery does seem to be running down quickly.  My wife has 13" MacBook and battery seems much better.  I see that my MacBook Pro spec is less battery time than the MacBook 13" but this does seem very poor indeed. Is this typical in your experience? Anyone done anything about it?  Thanks

    Actually my MBP 15" i7 2.2 battery life is very good. And that is with a SSD, original drive in a Optibay, 8GB RAM.
    I do turn off bluetooth, set the screen brightness down a little and have it set to only use the intergrated graphics when on battery.
    You really don't say how long it was, length of time, from 97% to 6% but even when the system is asleep it uses power.

  • Please Please Help...My t6100 sound quality is very poor

    I cut the speakers wire to extend the wire to be make as home theatre. i cut four speakers wire and extend it. but i didnt cut the front right speaker which is enabled with sound control. after fixing it the sound quality is very poor other than front right speaker...any one knows please help and give solution....

    Hello button172
    If you are having an issue with your purchase, then report it to the iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • My iphone5s continually drops calls and has very poor sound for callers sooo disappointed compared with iPhone 4 from which I've just upgrade

    I am so disappointed as my iPhone 5 s is very poor for calls and repeatedly drops calls. I've contacted Orange and done a reset to factory settings with no improvement.These calls are to landlines. My iphone4 was excellent in comparison . I've requested an Apple support call tomorrow - any other suggestions  or similar experiences? Call bars are much lower too on this new phone and wifi fails too with frequent fail to connect to server messages. I so regret having this phone..

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • My MBP 2011 can't detect microphone, why?

    My internal microphone works perfectly fine but when I insert an external microphone, my MBP fails to detect it.  When I go to System Preferences>Sound>Input, nothing changes in the "Line In" area when I plug in my microphone.  When I try to speak into my microphone, it's not picking up any sound at all.  My headphone port works fine.
    NOTE:  My MBP 2011 went in for a logic board replacement/repair 2 weeks ago at an Apple Store.  Is it possible this microphone issue is caused by a logic board problem?

    This because line level is not Mic level, line level requires about 60 dbv/dbu or more or less of electrical gain (depending on voltage in to load specifications, db short for decibel is not necessarily a measuremet of SPL, sound pressure level, it is a mathematical equation reducing complex equations to a unit of measurement to use in math expressions...very simply put) than a microphone can generate.
    You would need a mic pre-amp/mixer to provide a line signal, a mic can not provide anywhere near this level.
    This is a very simplified explanation of the electrical therory at work here, and I don't think you are probably interested reading quite complex math equations that "crunch these numbers.
    If you do an online search you will find a plethora of pre-amps that will boost this level up to line level, or you can look in to something like the Griffin iMic USB interface which will allow you to use a mic level signal into your USB port easily and affordably.
    http://store.griffintechnology.com/catalog/product/view/_ignore_category/1/id/62 3/s/imic/
    http://www.youtube.com/watch?v=lVZ8Ko-nss4
    I hope this helps you understand what's happening and helps you out.
    Some simplified  explanations
    http://www.ovnilab.com/articles/linelevel.shtml
    http://en.wikipedia.org/wiki/Line_level

Maybe you are looking for

  • Upgraded to 10.6.1.17 and now purchased songs skip

    So I upgraded a couple days ago and have noticed that certain songs skip before the song is finished, anywhere from 60-20 seconds before the end of the song.  The only songs I've noticed this on are purchased from the iTunes Store. Crossafde is off a

  • What type of mac do i need for home use to watch and edit videos

    What type / power of MAC do i need for home use to watch and edit vedeos as well as basic computer work?

  • How to sign a certificate signing request

    Hi all, In the PKI process, a client generates a PKCS#10 [certificate signing request|http://en.wikipedia.org/wiki/Certificate_signing_request] (CSR see [sun.security.pkcs.PKCS10|http://www.docjar.com/docs/api/sun/security/pkcs/PKCS10.html] ), sends

  • RFC Authorization

    All, we are trying to do a HTTP to RFC sccenario and we get the following error while sending the message to the remote R3 system - "User xxx has no RFC authorization for function group nnnn". First we tried giving access to that function group later

  • Email notification and UWL

    Hello Everyone, We are currently implementing Universal Worklist. For a start we will connect it to several SAP back-ends (R/3, SRM, HR), and in a second stage we will connect it also to others -non SAP- systems having their own workflows. Currently,