Re: standard hierarchy
hi experts,
i want to create a new cost center but before i need to create a hierarchy area name-xxxx-410. so i went to okeon, and selected the ccg and drill down and select the last hierarchy area and selected create group at same-level and given xxxx-410 but the system is saying a message of group xxxx-410 already exists but i check in system there is no hierarchy area, the last hierarchy area is xxxx-380 after that we didnt create any hierarchy area.
so if anybody face the same problem give me your inputs and points will be assign for useful answers.
thanks in advance,
kk.
Hi KK,
First you go to KSH3, give xxxx-410 and check if there is any Cost Center Group already existing. If it is existing, you only to assign it in the Standard Hierarchy. If not, you need to create the Group first using KSH1. Once the Group is created, go to KSH2, give the Standard Hierarchy Name OR the Node (alos a CCG) under which you want to assign this xxxx-410. Inside the screen, select the "Node" (single click on the Node name) and the press "Lower Level" button. A new blank row will be inserted by system under the Node. Now click on the arrow seen there, you will get a pop-up, where in you will mention Cost Center Group xxxx-410 and enter. Now, your new Group has become a Note in the Standard Hierarchy. You can start creating the Cost Centers, in the master data, you will be able to see this CCG in F4 values of Hierarchy Area.
Revert back if you face any problem...
Srikanth Munnaluri
Similar Messages
-
How batch append cost center group to standard hierarchy by batch
Hi Guys,
Would you please tell how me how append cost center groups to standard hierarchy by batch, every time I have to do it one by one, is there a convenient way? thanks.
Best Regards
FSHi,
You can create any number of cost center groups as per your requirement.
But one thing is crucial. If you crin your eate the groups using the T Code:OKEON. those will effect to the standard hierarchy.
Cost centers created wil KSH1 will not effect to standard Hierarchy.
Main point here is the main hierarchy should be maintained in OKEON. Later you can add any number of groups to that. LSMW will work, before that Hirarchy Area(Cost center group) should be maintained in the system for effective work of LSMW.
Regards,
Pavan Kumar Arvapally -
Transport cost center standard hierarchy & profit center herarchy
Dear All,
Pls guide how to transport cost center standard hierarchy, cost center groups, profit center hierarchy and profit center groups from config client to production?
Regards
KomalHi,
For CO data go to OKE6 transaction and create a change request.
For PCA, go to 0KEQ and do the same.
Regards,
Eli -
How to make changes to profit center standard hierarchy?
Hello!
I have to make changes in standard profit center hierarchy. Should I make the changes in IMG or Sap Easy access -screen? If I make changes in IMG, could you please tell me the right path where can I find it?
Another question, if some profit center is in the wrong place in stardard hierarchy and I want to transfer it to another place (under other node for example), how is this done? Should I delete this profit center first (I tried delete but it wasn't possible..) or can I just transfer the profit center?
Thanks!
Points will be given!=)Hi,
in the IMG you can maintain the profit center standard hierarchy via TA KCH4. The path is:
-> Controlling
-> Profit Center Accounting
-> Master Data
-> Maintain Standard Hierarchy
The transport of the profit center standard hierarchy is done via TA 0KEQ, (this is relevant for both KCH5N and KCH4).
IMG Path:
-> Controlling
-> Profit Center Accounting
-> Tools
-> Transport Customizing Settings
Hope I understood you correctly.
Regards
Karl -
Cant change COST CENTER GROUPS and/or Standard Hierarchy
Hello all,
im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
I dont know anymore what to do.
ive searched in forum and google but still didnt find enything usefull.
Regards
Laurynas PrikockisHello,
There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
Hope this makes clear.
Regards,
Ravi -
Best Practice on Moving Standard Hierarchy (Cost /Profit) into production
Hi,
What is the best practice to move standard hierarchy into production? Is it better to move it as a transport? Or is it better to upload into production with LSMW?
Thanks,
SantoshiHi,
Best practices applied to all developments whether it is R/3, BI modelling or Reporting and as per the best practice we do development in Development system, testing in testing box and finally deploy successful development to production. yes for user analysis purpose, user can do adhoc analysis or in some scenario they create user specific custom queries (sometimes reffere as X-query created by super user).
So it is always to do all yr developement in Development Box and then transport to Production after successful QA testing.
Dev -
Profit center Standard Hierarchy
Hello Gurus
I Defined the Profit center group in KCH1 but i can not able to Define the standard hierarchy in KCH4 when i was define the standard hierarchy while system shows some message
This function is not allowed in the standard hierarchy
Message no. OH040
can anybody give the Valuable inputs my issue my client year ending process is going on
Regards
venkatHi,
Via KCH1 you create alternative profit centre groups. If you want to define standard hierarchy, you have to create it in KCH4 (or 0KE5).
Regards,
Eli -
Profit Center Standard Hierarchy in Production Server
Dear All
I have done Controlling Area Settings for Profit Centers via TCode: 0KE5. I have made Profit Center Standard Hierarchy in Development server. The same Standard hierarchy is available in Quality sever but it is unavaliable in Production server.
Please guide me.
Thanks & Regards
KanwaljitHi,
You should check if the transport with the relevant configuration has passed to Produciton. Anyway, you can create new one via 0KEQ transaction.
Regards,
Eli -
Urg: Need to replace standard hierarchy with alt hierarchy
Hi,
I have an urgent need to replace the cost center standard hierarchy with the Alternative hierarchy already available. I dont have Business organization implemented so I cannot use Keog3...I need to know if there is any other way..
this is super urgent...please help...Hi i am a student could you please answer
what is an alternate hierarchy and when do we use it
Thanks -
Re: Analysis period in standard hierarchy for profit center
Hi All,
I want to change analysis period "From" in the standard hierarchy in profit center group.When i go and changed the date in the set analysis period "valid from" and save it,the date has not get updated. Please tell me a way to change the date. Used T code KCH6N
Thanks,
AmaHi either profit center or cost center, change the analysis period will not work if we do it in between the year. we have to change this at the end of the fiscal year end. Then only it will allow you to save it..
Thanks
Fit 4 Nothing -
Hi
we have a situation where client going for restructuring of standard hierarchy.
After the restructuring in case the restructuring is not in the desired structure we need to get back to the old situation.
one thing we can do is to export the existing hierarchy and save it locally. and the same can be imported to restore back to the old situation.
Now the issue is, in case client creates new cost center groups and assigns the same to some cost center and later if he wants to go back to the old hierarchy (which does not have this new groups) there will be inconsistency of data.
Is it possible to do the complete restoring back of the standard hierarchy including deleting the cost centers and the new groups.
Please advise
thanks
HaranadhYou can only re-arrange cost centers within the hierarchy. If new cost centers are created, they cannot be deleted from the hierarchy, unless you delete the cost center itself. Again, if you have posted transactions, be it plan or actual in the mean time, these cannot be deleted.
-
Profit center has assigned in wrong standard hierarchy in sap
Hi,
PHE09 this is my profit center ,which is assigned in two differenr standard hierarchy so i want o remove a profit center wich is assigned wrongly in one standard hierarchy ,kindly advise me how to remove it
Thanks in advance
Chandrasekaran.RHi Chandrasekaran,
Can you provide details on where you are assigning the profit center?
Thanks,
Shalini -
Standard hierarchy for cost centers, transactions okeon, okenn
Hello,
When I run transaction okenn (or okeon) I cannot see hierarchy for any cost center group. Exactly, option 'expand subtree' cannot be executed so I am not able to see all nodes of the specific cost center group. I can only see the name of the cost center group, or cost center itself, but not as expanded tree.
What could be the problem? Do I have to define something additionally?
Best regards,
DraganHi,
I don't really trust SU53...it's unreliable as it only shows you the last authorization object checked. Please verify via an authorization trace in ST01. If the issue is indeed PLOG please check SAP notes 177844, 211991 & 175063.
Once you have gone through the notes please run the hierarchy master data comparison (OKEON-> Menu -> Extras).
The issue regarding PLOG and the standard hierarchy is well known in support, but I haven't seen it around in a while....
Regards
Karl
Edited by: Karl Helm on Mar 24, 2009 5:38 PM -
Hi, I want to know the effects that I could have if I change the standard hierarchy of my Cost Center Group.
Elsa,
You could change your standard hierarchy but after you will have problem with your analyses.
you will not be able to compare yours data. The reports are based one the Standard hierarchy.
But if your can explain the differences to your company ....
Regards
Valérie
Message was edited by: valerie secondy -
Create a Standard Hierarchy with no Enterprise Organization
Hi:
A Small problem in CO, I need help.
I am trying to create a Standard Hierarchy for a new CO society, but the system asks for an Enterprise organization. The problem is the next: I am working for a client who has several CO societies, with a hierarchy in each CO society, but no Enterprise organization created.
How can I create a Standard Hierarchy without to create an Enterprise Organization?
Thanks in advance.
Regards.Hi Mario,
Through the following path in SPRO transaction (IMG):
Controlling -> Cost Center Accounting -> Enterprise Organization -> Enter Settings for Enterprise Organization
you will be able to check whether the Controlling Area has the Enterprise Organization schema active or not.
If you are creating a new Controlling Area and you do not need to have that flag enabled, try to uncheck it here.
Hope it helps you.
Regards,
Daniel. -
Change a profit center Standard Hierarchy
Hello,
How do i change a standard hierarchy for profit centers which is already assigned in 0kE5.
Currently there are no transaction data in the system.However the profit centers are already assigned to the standard hierarchy ABC.
We now want to change the standard hierarchy to DEF.
Is this possible?
Thanks & Regards,
RajeshwariHello Murali,
Thanks for the Quick reply.
We did try using the transaction KCH4 and delete the profit centers/profit center groups assigned to it.
However we get the following message for the same:
This function is not allowed in the standard hierarchy
Message no. OH 040
Diagnosis
You are directly processing the standard hierarchy (cost centers, business processes). The following actions are invalid for individual values:
Inserting groups that already contain values
Removing/deleting groups that already contain values
You are processing the profit center standard hierarchy or any other alternative hierarchies that contain parts of the standard hierarchy. The following actions are then invalid for individual values:
Delete
Insert
Reassign (delete and insert)
Removing groups that already contain values
Inserting groups that already contain values
Procedure
Undo the change you wanted to make.
Hence we are unable to even remove the profit center groups within the group ABC.
Is there any other way?
Thanks & regards,
Rajeshwari
Maybe you are looking for
-
Windows 7, and Pixma iP6600D printer. Is there a driver?
Just upgraded computer to Windows 7, and broke out my old Canon Pixma iP6600D printer. Having difficulty downloading a driver and getting it to print. Will this printer even work with Win 7?
-
Hi, I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month. Today, the Lacie driver is pluged and running, but the comput
-
Hi All, I got one issue related R3AD queue. If i made any changes in R/3 BP, those changes are replicated in CRM. After that i got error message like " Contact person relationship already exists between partners &1 and &2 ". I have done synchronizati
-
Can't send or receive group texts after 8.1 update
I can't send or receive group texts after I updated my phone. I do get "get media content now" but nothing happens when I click it.
-
Regarding refurbished iPods and the %10 student discount
Does apple offer the student discount with refurbished iPods?