Re-start

I have a Pavillion Media Center Desk Top that will periodically re-start. Some of the time it will be in a loop and re-start over and over. I am sure that it is coincidental, but this began to occur after downloading HP Printing Software. Any answers?

Hi there Hugedreams,
Have you checked if your phone is updated to the latest available firmware through the phone itself or Nokia Suite? If there is an update available, please upgrade to it. If the problems are still persisting, re-install your current firmware, and if that doesn't work, Restore your phone to factory settings. If that STILL does not work, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care point: http://nokia.com/support

Similar Messages

Error in starting Adobe Bridge in Photoshop CS2

I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHD

Very useful.
Good Luck.
My
Si
tes

Muse error in starting

Well here it goes again.
Muse wont start because when I login it says "
An unexpected error occurred processing your request. Please try again later.
I-200"
I have been up since 5:30 am trying to get some work done on a Saturday.
So I didn't have CC desktop running so I figured that was the problem. CC desktop would not run so I deleted the opm.db file which allowed CC desktop to work ... this is a common occurrence. I also have to constantly change my internet connection setting by turning off "auto detect script" under LAN settings.
Still I get the same error when trying to start Muse, but Photoshop starts fine.
This whole login in nightmare with CC is terrible, I wish I just got CS6 and stuck with that for the time I've lost.
Mike

Moving this discussion to the Help with Using Adobe Muse forum.
Mueller-Design you may want to see An unexpected error occurred I-200. The community in the Help with Using Adobe Muse though may have additional suggestions.

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Error in starting weblogic commerce server on Win2000

I downloaded the evaluation release of Weblogic Commerce 3.1 and th licence,
and installed it on Windows 2000 Professional,
I have a Weblogic Application Server 5.1 installed
the server did not start and gave an error, please help us as to what the
problem is and how to get it running.
=========== Error Message ===============
JAVA_CLASSPATH IS
C:\jdk\lib\tools.jar;C:\weblogic\lib\weblogic510sp6boot.jar;C:
\weblogic\classes\boot
WEBLOGIC_CLASSPATH IS
C:\weblogic\lib\weblogic510sp6.jar;C:\weblogic\lib\WebLogi
c_RDBMS.jar;C:\weblogic\license;C:\weblogic\classes;C:\weblogic\lib\weblogic
aux.
jar;C:\weblogic\lib\weblogic-tags-510.jar;C:\WebLogicCommerceServer3.1\licen
se;C
:\WebLogicCommerceServer3.1\classes;C:\WebLogicCommerceServer3.1\lib\rules.j
ar;C
:\WebLogicCommerceServer3.1\lib\jrulesserviceprovider.jar;C:\WebLogicCommerc
eSer
ver3.1\deploy\bmp\classes;C:\WebLogicCommerceServer3.1\eval\win32\Taxware\cl
asse
s;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;C:\weblogic\eval\cloudscape
\lib
\tools.jar;C:\weblogic\eval\cloudscape\lib\client.jar
Fri Dec 01 11:04:39 GMT+05:30 2000: <WebLogicServer> Read global
properties C:\WebLogicCommerceServer3.1\weblogic.propertie
Fri Dec 01 11:04:39 GMT+05:30 2000: <WebLogicServer> No per-server
properties files found
Fri Dec 01 11:04:39 GMT+05:30 2000: <Logging> FileLogger initialized.
Fri Dec 01 11:04:39 GMT+05:30 2000: <WebLogicServer> ************
WebLogic Server (5.1.0 04/03/2000 17:13:23 #66825) 'serve
:\WebLogicCommerceServer3.1
Fri Dec 01 11:04:39 GMT+05:30 2000: <WebLogicServer> ************ (c)
1995, 1996, 1997, 1998 WebLogic, Inc., (c) 1999 BEA S
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.swapIntervalSecs', current value: '10'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.ConnectionConsumer', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.enforceClientCert', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.login.readTimeoutMillis', current value: '5000'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.propertiesFile', current value: 'C:\WebLogicCo
.properties'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.bindAddr', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.servlet.reloadCheckSecs', current value: '-1'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.authRealmName', current value: 'WebLogic Server
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.SSLHandler.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.startupFailureIsFatal', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.http.keepAliveSecs', current value: '60'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.servlet.classpath', current value: ''
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.tunneling.clientPingSecs', current value: '45'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.defaultWebApp', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.persistentStoreDir', current value: 'se
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.perServerPropertiesFile', current value: 'null
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.queue', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.invalidationIntervalSecs', current valu
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.persistence', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.user.enable', current value: 'tr
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.rmi.dgc.callSystemGC', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.enableEvents', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.maxTransactedDurableSubscribers', current value:
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.weight', current value: '100'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.connectionPoolArgs', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.disableGuest', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.persistentStorePool', current value: ''
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.URLAclFile', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.percentSocketReaders', current value: '33'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.zac.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jdbc.TXDataSource', current value: '[weblogic.jdbc.TX
.jts.commercePool=commercePool ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.DNSName', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.ejb.deploy', current value: 'C:/WebLogicCommerceServe
C:/WebLogicCommerceServer3.1/lib/axiom.jar,C:/WebLogicCommerceServer3.1/lib/
ebusiness.jar,C:/WebLogicCommerceServer3.1/lib/adv
erceServer3.1/lib/bridge.jar,C:/WebLogicCommerceServer3.1/lib/document.jar,C
:/WebLogicCommerceServer3.1/lib/p13nadvisor.jar,C:
.1/lib/portal.jar,C:/WebLogicCommerceServer3.1/lib/ruleeditorbeans.jar,C:/We
bLogicCommerceServer3.1/lib/rulesservice.jar,C:/We
lib/servicemgr.jar'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.workspace.showUserKeysOnly', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.allow', current value: '[weblogic.allow.reserve.weblo
commercePool=everyone
weblogic.allow.execute.weblogic.servlet.Certificate=system
weblogic.allow.execute.weblogic.servlet.Admin
low.execute.weblogic.servlet.AdminLicense=system
weblogic.allow.execute.weblogic.servlet.AdminConnections=system
weblogic.allo
et.classes=everyone
weblogic.allow.execute.weblogic.servlet.AdminClients=system
weblogic.allow.execute.weblogic.servlet.AdminV
llow.execute.weblogic.servlet.AdminMain=system
weblogic.allow.execute.weblogic.servlet.AdminThreads=system
weblogic.allow.rese
tionPool.docPool=everyone weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.execute.weblogic.servlet.AdminEvents=
ite.weblogic.workspace=everyone
weblogic.allow.execute.weblogic.servlet.AdminJDBC=system
weblogic.allow.execute.weblogic.servl
ow.execute.weblogic.servlet.AdminProps=system
weblogic.allow.execute.weblogic.servlet.ConsoleHelp=everyone ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.listenPort', current value: '7501'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.allow', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.servlet.reloadOnModify', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.io.fileSystem', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.startupArgs', current value: '[weblogic.system
p=TraceFlags=E ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jdbc.enableLogFile', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookie.domain', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.debug', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.clustering.enable', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.shutdownArgs', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.rmi.startupClass', current value: '[weblogic.rmi.star
blogic.rmi.internal.RegistryImpl ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.keepAlive.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.jdbc.connTimeoutSecs', current value: '
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.name', current value: 'server'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.helpPageURL', current value: 'http://www.weblo
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.key.server', current value: 'C:\WebLogicComm
okey.pem'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.rmi.startupArgs', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.topicSessionPool', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.logFileBufferKBytes', current value: '8'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.home', current value: 'C:\weblogic'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.documentRoot', current value: 'public_html'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.servlet.reloadOnModifyRecursive', current value
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.errorPage', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.certificate.authority3', current value: 'nul
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.administrativePort', current value: '0'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.certificate.authority2', current value: 'nul
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.startupClass', current value: '[weblogic.syste
tup=com.beasys.commerce.foundation.plugin.weblogic.TraceStartup
weblogic.system.startupClass.KeyBootstrap=com.beasys.commerce.
otstrap
weblogic.system.startupClass.serviceManager=com.beasys.commerce.servicemanag
er.CommerceServiceManagerStartup ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.nonPrivGroup', current value: 'nobody'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.multicastTTL', current value: '1'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.home', current value: 'C:\WebLogicCommerceServ
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.https.keepAliveSecs', current value: '120'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jndi.transportableObjectFactories', current value: ''
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.certificateCacheSize', current value: '3'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.tunneling.clientTimeoutSecs', current value: '4
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jdbc.DataSource', current value: '[weblogic.jdbc.Data
l.docPool=docPool ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.nonPrivUser', current value: 'nobody'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.zac.publishRoot', current value: 'exports'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.clientRootCA', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.defaultLoadAlgorithm', current value: 'round-
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.enable', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.administrator.phone', current value: '(None)'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jdbc.connectionPool', current value: '[weblogic.jdbc.
rl=jdbc:beasys:docmgmt:com.beasys.commerce.axiom.document.ref.RefDocumentPro
vider,driver=com.beasys.commerce.axiom.document.jd
=0,initialCapacity=10,maxCapacity=20,capacityIncrement=1,allowShrinking=true
,shrinkPeriodMins=15,refreshMinutes=5,props=jdbc.u
mmercePool;jdbc.isPooled=true;weblogic.t3.waitForConnection=true;weblogic.t3
.waitSecondsForConnection=999999999999;weblogic.jt
onSecs=999999999999;docBase=C:/WebLogicCommerceServer3.1/dmsBase;schemaXML=C
:/WebLogicCommerceServer3.1/dmsBase/doc-schema.xml
nPool.commercePool=url=jdbc:cloudscape:Commerce;create=true;upgrade=true,dri
ver=COM.cloudscape.core.JDBCDriver,loginDelaySecs=
Capacity=20,capacityIncrement=1,allowShrinking=true,shrinkPeriodMins=15,test
ConnsOnReserve=true,testTable=WLCS_IS_ALIVE,refres
ne;password=none;server=none;weblogic.t3.waitForConnection=true;weblogic.t3.
waitSecondsForConnection=999999999999,weblogic.jts
nSecs=999999999999,verbose=false ]'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.debug', current value: 'false'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.jdbc.logFileName', current value: 'C:\WebLogicCommerc
og'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.dnsName', current value: 'null'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.requireAuthentication', current value: 'true'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.multicastAddress', current value: ''
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.defaultSecureProtocol', current value: 't3s'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.auth.enable', current value: 'tr
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.system.executeThreadCount', current value: '15'
Fri Dec 01 11:04:39 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookie.comment', current value: 'Weblog
ng Cookie'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.tableNamePrefix', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.connectionPool', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.shutdownClass', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.defaultServlet', current value: 'file'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.name', current value: 'mycluster'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.defaultProtocol', current value: 't3'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.postTimeoutSecs', current value: '30'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.group', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.caseSensitive', current value: '
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.certificate.server', current value: 'C:\WebL
rver\democert.pem'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.mimeType', current value: '[weblogic.httpd.mime
.wmlscriptc=wmlsc weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.image/gif=gif weblogic.httpd.mim
stream=exe weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.application/pdf=pdf weblogic.httpd.mimeType.appl
ar weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
weblogic.httpd.mimeType.applica
tpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.application/vnd.
ttpd.mimeType.application/x-java-serialized-object=ser ]'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.webApp', current value: '[weblogic.httpd.webApp
rceServer3.1/server/webapps/examples/portal/portal.war
weblogic.httpd.webApp.tools=C:/WebLogicCommerceServer3.1/server/webapps
c.httpd.webApp.wlcs=C:/WebLogicCommerceServer3.1/server/webapps/wlcs/ ]'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.minPasswordLen', current value: '8'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.connectionFactoryArgs', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.persistentStoreType', current value: 'f
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cacheEntries', current value: '1024'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.certificate.authority', current value: 'C:\W
\server\ca.pem'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.resource.MailSession', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookie.maxAgeSecs', current value: '-1'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.login.readTimeoutMillisSSL', current value: '25000'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.cluster.enable', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.SSL.ciphersuites', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.indexFiles', current value: 'index.html,index.h
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.password', current value: '[weblogic.password.system=
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.enableLogFile', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.enableReverseDNSLookups', current value: 'fals
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.indexDirectories', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.maxLogFileSize', current value: '1024'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.logFile', current value: 'C:\WebLogicCommerceS
.log'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.timeoutSecs', current value: '3600'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.logFileFormat', current value: 'common'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.perClusterPropertiesFile', current value: 'nul
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.key.export.lifespan', current value: '500'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.CORBA.connectionPool', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'java.system.property', current value: '[java.system.property.c
/WebLogicCommerceServer3.1/db/data ]'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.logFileName', current value: 'C:\WebLogicCommer
s.log'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.defaultMimeType', current value: 'text/plain'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.debug.httpd.servlet', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.connectionFactoryName', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.SSLListenPort', current value: '7502'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.URLResource', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookie.name', current value: 'WebLogicS
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.quiescent', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.register', current value: '[weblogic.httpd.regi
sys.commerce.foundation.flow.FlowManager
weblogic.httpd.register.AdminProps=admin.AdminProps
weblogic.httpd.register.classes=w
hServlet weblogic.httpd.register.AdminEvents=admin.AdminEvents
weblogic.httpd.register.AdminMain=admin.AdminMain weblogic.http
gic.servlet.ServerSideIncludeServlet
weblogic.httpd.register.servletimages=weblogic.servlet.internal.InternalImag
eServlet webl
oleHelp=weblogic.servlet.ClasspathServlet
weblogic.httpd.register.AdminJDBC=admin.AdminJDBC
weblogic.httpd.register.ShowDocSer
.content.ShowDocServlet
weblogic.httpd.register.*.jsp=weblogic.servlet.JSPServlet
weblogic.httpd.register.AdminCaptureRootCA=a
weblogic.httpd.register.AdminRealm=admin.AdminRealm
weblogic.httpd.register.AdminLicense=admin.AdminLicense weblogic.httpd.reg
certificate weblogic.httpd.register.AdminConnections=admin.AdminConnections
weblogic.httpd.register.AdminClients=admin.AdminCl
ister.file=weblogic.servlet.FileServlet
weblogic.httpd.register.AdminVersion=admin.AdminVersion
weblogic.httpd.register.authen
.ClientAuthenticationServlet
weblogic.httpd.register.AdminThreads=admin.AdminThreads ]'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.clientRootCA4', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.clientRootCA3', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.clientRootCA2', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookies.enable', current value: 'true'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.servlet.extensionCaseSensitive', current value:
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.group.enable', current value: 't
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.nativeIO.enable', current value: 'true'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.rmi.enableServerSideStubs', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.cookie.path', current value: '/'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.session.URLRewriting.enable', current value: 't
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.enableSetUID', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.acl.enable', current value: 'tru
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.topic', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.administrator.name', current value: 'WebLogic Adminis
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.jms.queueSessionPool', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.ssl.enable', current value: 'true'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.administrator.location', current value: '(None)'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.enableSetGID', current value: 'false'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.initArgs', current value: '[weblogic.httpd.init
Filename=/weblogic/admin/help/NoContent.html
weblogic.httpd.initArgs.*.jsp=pageCheckSeconds=0,packagePrefix=jsp,compileCo
mmand
gDir=C:/WebLogicCommerceServer3.1/server/classfiles,verbose=false,keepgenera
ted=false weblogic.httpd.initArgs.file=defaultFile
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.administrator.email', current value: 'root'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.enableConsole', current value: 'true'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.security.realm.cache.perm.enable', current value: 'tr
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.system.user', current value: 'system'
Fri Dec 01 11:04:40 GMT+05:30 2000: <Config> Property name:
'weblogic.httpd.charsets', current value: 'null'
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> awt.toolkit =
sun.awt.windows.WToolkit
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> cloudscape.system.home
= C:/WebLogicCommerceServer3.1/db/data
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> commerce.properties =
C:\WebLogicCommerceServer3.1\weblogiccommerce.prop
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> file.encoding = Cp1252
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> file.encoding.pkg =
sun.io
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> file.separator = \
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.awt.fonts =
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.awt.graphicsenv =
sun.awt.Win32GraphicsEnvironment
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.awt.printerjob =
sun.awt.windows.WPrinterJob
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.class.path =
C:\jdk\lib\tools.jar;C:\weblogic\lib\weblogic510sp6boo
s\boot
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.class.version =
46.0
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.compiler =
symcjit
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.ext.dirs =
C:\jdk\jre\lib\ext
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.home = C:\jdk\jre
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.io.tmpdir =
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.library.path =
C:\jdk\bin;.;C:\WINNT\System32;C:\WINNT;C:\WINNT\sys
System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program
Files\Microsoft Visual Studio\Common\MSDev98\Bin;
ft Visual Studio\Common\Tools;C:\Program Files\Microsoft Visual
Studio\VC98\bin;C:\jdk\bin;C:\weblogic\bin;C:\weblogic\bin;C:\
1\eval\win32\CyberCash\bin;C:\WebLogicCommerceServer3.1\eval\win32\Taxware\b
in
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.security.manager
=
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.security.policy =
C:\weblogic\weblogic.policy
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.specification.name = Java Platform API Specification
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.specification.vendor = Sun Microsystems Inc.
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.specification.version = 1.2
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vendor = Sun
Microsystems Inc.
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vendor.url =
http://java.sun.com/
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vendor.url.bug =
http://java.sun.com/cgi-bin/bugreport.cgi
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.version = 1.2.2
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vm.info = build
JDK-1.2.2-001, native threads, symcjit
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vm.name = Classic
VM
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.vm.specification.name = Java Virtual Machine Specification
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.vm.specification.vendor = Sun Microsystems Inc.
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
java.vm.specification.version = 1.0
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vm.vendor = Sun
Microsystems Inc.
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> java.vm.version =
1.2.2
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> line.separator =
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> os.arch = x86
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> os.name = Windows NT
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> os.version = 5.0
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> path.separator = ;
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> pipeline.properties =
C:\WebLogicCommerceServer3.1\pipeline.properties
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> sun.boot.class.path =
C:\jdk\jre\lib\rt.jar;C:\jdk\jre\lib\i18n.jar;C:\j
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> sun.boot.library.path
= C:\jdk\jre\bin
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props>
sun.io.unicode.encoding = UnicodeLittle
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> user.dir =
C:\WebLogicCommerceServer3.1
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> user.home =
C:\Documents and Settings\Administrator
Fri Dec 01 11:04:40 GMT+05:30 2000: <System Props> user.language = en
Fri Dec 01 11:04:40 GMT+05:30 2

Hello Muffy,
It looks like you do not have WLS 5.1 service pack 6 installed correctly. I
say this because I do not see the sp6 message at the top of your log and I saw
this message in your log:
org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean" allows no
further input; "transaction-isolation" is not allowed
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com

OEPE causes Eclipse Kepler to start with wrong workspace, overrides Eclipse's workspace configuration

I'm a new OEPE user, and found that after installing it, Eclipse (Kepler) now starts up with the wrong workspace every time. I have to explicitly do File > Switch Workspace... to get Eclipse to restart with the correct workspace. Also, the workspace I want to use is the only one listed in the Workspaces preferences panel (Window > Preferences > General > Startup and Shutdown > Workspaces). So I can't figure out why Eclipse is using the wrong workspace, and why it's even finding this wrong one.
I found that many other users of OEPE with Kepler are having this same problem:
Eclipse Community Forums: Eclipse Platform &raquo; Kepler: On start up, I no longer get prompted for workspace locat…
And this sounds curiously like this old problem reported right here on the OTN Community site:
https://forums.oracle.com/thread/2191740
Any suggestions for how to get around this? I assume this is a bug, but don't know the correct process for reporting OEPE bugs.

77e559c0-cd28-48cd-916f-3f755e9683b5 wrote:
Hi.
I suspect that some action by the OEPE code somehow modifies the OSGi Cache so that it no longer asks you what workspace you'd like to use (and forces usage of the workspace in top user directory.) I found that if you put in "-clean" in your eclipse.ini, then you get asked what workspace you'd like to use. This flag clears out the OSGi cache (hence my theory that it is this cache that is messed up)
That said, there are arguments for not doing this all the time. See this discussion: java - How to run eclipse in clean mode? and what happens if we do so? - Stack Overflow
Finally, I suspect you have another workspace on your system now. Presuming you are on a PC, go to your user dir - I'd wager there is a "workspace" dir there now. That is where OEPE wants to work.
Good Luck!
OEPE should be able to work with any workspace; it has in the past! If a specific workspace is required with this release, that is a step backward in my opinion. That said, if that is the direction of the product, so be it. I find it hard to believe that is the direction of the product, however!

Starting deployment prerequisites: error in BI-Java installation sapinst

Hi all,
We are in process updating Bw 3.5 to BI 7.0 we hace sucessfully completed the Upgrade but while installing Bi java thru Sapinst in third step like java instance installtion i was stck with the below error.
We have downloaded the Cryptographic file and placed in jdk folder still the same problem is coming.
Please suggest...
Thanks,
Subhash.G
Starting deployment prerequisites:
Oct 13, 2007 2:42:18 AM Error: Creation of DataSource for database "BWQ" failed.
Original error message is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
Stack trace of original Exception or Error is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..

Problem solved followed the notes 1063396.

Lock ups, Difficult starts, reboot/restart = shutdown

My computer locks up and will not "Restart", if I tell it to "restart" it shuts down. The "Restart" button also causes the computer to shutdown.
I checked logs and found this stuff:
kernel: ApplePMU::PMU FORCED SHUTDOWN, CAUSE = -122
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x00000000000000D4 PC=0x0000000000266EA0
Latest crash info for cpu 1:
Exception state (sv=0x259C2500)
PC=0x00266EA0; MSR=0x00009030; DAR=0x000000D4; DSISR=0x40000000; LR=0x00266EE8; R1=0x11F03E40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00266EAC 0x00266E10
Proceeding back via exception chain:
Exception state (sv=0x259C2500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x24F26500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 1): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x259C2500)
PC=0x00266EA0; MSR=0x00009030; DAR=0x000000D4; DSISR=0x40000000; LR=0x00266EE8; R1=0x11F03E40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00266EAC 0x00266E10
Exception state (sv=0x24F26500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
I also ran a Hardware Test and all the hardware seems ok.
I've taken the battery out of the PMU and it doesn't seem to have any issues starting without that battery in place.
I'm really confused. Why all of a sudden would my computer hate me like this?

Hi, Daniel!
You can use this Apple Document to test your QS power supply with a voltmeter, without having to remove it from the Mac. It references a different model, but the only difference is that the voltage at pin 22 is 25 volts on a QuickSilver PSU rather than the 28 volts shown for the Gigabit Ethernet Mac. The procedural steps are the same...
Does the Mac restart properly with the battery removed from the logic board? Does the battery test out okay, or can you swap it with another one?
Gary

Running workbook from .bat fails to start application missing CORE40 dll

I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!

Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael

'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.

I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
 codebase="http://localhost/LottoMadness/"
 href="LottoMadness.jnlp">
 <information>
 <title>LottoMadness Application</title>
 <vendor>Rogers Cadenhead</vendor>
 <homepage href="http://localhost/LottoMadness/"/>
 <icon href="lottobigicon.gif"/>
 </information>
 <resources>
 <j2se version="1.5"/>
 <jar href="LottoMadness.jar"/>
 </resources>
 <application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
 at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
 at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
 at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
 at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
 at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
 at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
 at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
 at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
 at com.sun.javaws.Launcher.launch(Unknown Source)
 at com.sun.javaws.Main.launchApp(Unknown Source)
 at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
 at com.sun.javaws.Main$1.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)

AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post.

Flex application running under AIR takes a long, long time to start.

I have a flex application which runs on a desktop under AIR. The application has an assets folder with 3,500 mp3 soundclips totalling about 50MB. The problem is, the application takes around 90 seconds to load. I'm sure that AIR is scanning the application folder and doing something with the contents because if I delete the assets folder it loads in about 5 seconds. Does anyone know why AIR/Flex would do this, and why it doesn't exhibit the same problem if I run or debug in Flexbuilder on eclipse? It's making my killer app unusable!
Thanks
Paulo

Well, I've spent a bit longer looking at this now, and the problem appears to lie with my encrypted local store. The first thing that happens is for the app to read the product key from the ELS. But, it fails (for some unknown reason). So, the app seems to hang there for 90 seconds until it eventually renders the welcome screen. If I remove the assets folder it still fails to read from the ELS, but only takes a couple of seconds to start the welcome screen. This is where the scanning of the application folder seems to come into play, because if I remove the code which reads from the ELS the app starts within 2 seconds whether the asset folder is there or not.
I think the slow startup and the scanning of the assets folder are just symptoms of a different problem, i.e. a problem with the ELS. I don't have the same problem with my development environment though - it's only when I test deploy the application.
Thanks for your help on this problem EgorKDie. I think I should be able to resolve it once I can sort out why the ELS is being awkward.

Help. Windows 7: The application was unable to start correctly (0xc0150002).

I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
Oh, and I've already tried installing and uninstalling it.

Without system information nobody can say anything. also check the logs in the Event Viewer.
Mylenium

How do i use my web cam, where do i go to, to get started

Can't figure out where to go to be able to use my web cam. Its not in my devices and printers area.

Firstly, uninstall the current version of Cyberlink Youcam and re-install it.
To Uninstall: Click Start >> type Programs and Features in search and select it from the list >> In there, select Cyberlink Youcam and uninstall it.
Once done, try using webcam with Skype or any other messenger you may have, or else re-install Youcam.
If the above does not work, do a System Restore to a previous working date when the webcam worked.
System Restore: Click Start >> type System Restore in search and select it any perform on-screen instructions to restore the notebook to a previous working date.
If none of the above work, open Device Manager, check if you have 'HP Webcam' listed under Imaging Devices category.
You would find the Product Number on the sticker in the battery compartment, will be similar to XT594PA#ABA.

Start Routine in Transformations

Hi,
For my reporting purpose i need to Transfer data from Cube to DSO
I need a start routine for the following requirment when transfering data from Cube to DSO
The Key fields in DSO are Location & Emp_ID and Date fields are ZAP_DTE (DATS)
CUBE-->DSO
While doing the transfer...i need to compare Emp and his ZAP_DTE AND need to transfer only if AP_DTE for that EMP is greater than the exisisting one else ignore the record
As i new to BW please update with the routine
Thanks

Hi Shambhu
We usually write out code in the section:
$$ begin of routine - insert your code only below this line -
What is the difference between writing the code in
$$ begin of 2nd part global - insert your code only below this line *
and
$$ begin of routine - insert your code only below this line - ?
Kind regards
Erik

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

Re-start

Similar Messages

Maybe you are looking for