Re: Startup files

My Mac Pro was stolen and I just bought a new Imac. Now, I would like to recovery my Itunes Library from my Mac account. I can see my old purchases but I don't know how to donwload them in my new IMAC. I apreciate your help

Sympathies for the loss. Sorry, but officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications. It's your responsibility to make backup copies in case something goes wrong with your system or it is lost or stolen and you lose all the information on your hard drive. The official statement of their policy can be found here, among other places. If you don't have a backup of your purchased items, and don't have them on an iPod, you're probably out of luck and will need to repurchase your tracks.
If you have your tracks on an iPod or have them backed up, post back and someone here can help you get them restored. Otherwise you can try contacting iTunes Store Customer Service and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Regards.

Similar Messages

Postoffice-startup-file not copied from SYS-volume

We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw

It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ITunes helper and qttask do not appear in my startup files menu

Troubleshooting iTunes not recognizing my iPhone anymore (always worked in the past), after downloading the new iTunes and new iPhone software. Have uninstalled and reinstalled iTunes twice and followed as much of the online troubleshooting as I could. Could not find iTunes helper and qttask in my startup files menu. This must be what is keeping iTunes from recognizing my iPhone. How do I get these files back?

Many thanks.
That can indicate trouble with your Apple Application Support. (Apple Mobile Device Support uses some AAS program files too, so it's consistent with your recognition issue, too.)
I'd try the following instructions:
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253
(Although those instructions are for a 32-bit Vista, they're pretty much identical for XP. Just read "Uninstall a program control panel" as "Add or Remove Programs control panel" and "Computer" as "My Computer".)

Javascript error at startup, file open and shutdown

I am using Dreamweaver CC on Windows 7, 64-bit. Starting with the last CC update to Dreamweaver, I get a javascript error at DW startup, file open and DW shutdown. The application seems to work fine, but the errors happen everytime and are always the same. At startup, it complains that a variable bcinit does not exist in file "BusinessCatalyst." At file open, the error is in file "_onOpen" onOpen is not defined and at shutdown, in file "TeamAdminTempDelete" delTempFile is not defined.
I have no idea what is going on. Any suggestions?
Thanks

HAve you tried troubleshooting the Javascript errors :http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-d reamweaver-cs4.html

Can I see my startup file in terminal mode on mac os 10.8.4

can I see my startup file in terminal mode on mac os 10.8.4
iMAC 27 inches, mi-2011
r 2,7 GHz Intel Core i5
16 Go 1333 MHz DDR3
AMD Radeon HD 6770M 512 Mo

What startup file? There are dozens. Why do you wish to do this. If you don't know what you are doing then you risk damaging your installation.
If you are referring to the preference files used, they can be read by any text editor and are located in /Library/Preferences/SystemComfiguration/ folder.

Illustrator CS5 won't honor my startup file in OS 10.8

It took me awhile to find the startup file so that I could empty out all of the swatches and stuff. So I finally found the Basic CMYK.ai file. I opened it and made all my edits to it. I saved the file and quit Illustrator. Now when I open Illustrator and create a new CMYK file none of the changes I made to the startup took, as in all my color swatches, brushes and everything like that are still there, but when I go back to the Basic CMYK.ai file it is correct. It is the way I left it.
I illustrate artwork for textbooks and I dont want to have to remove all those unneeded swatches everytime I create a new file. Please help.
Mac OS 10.8.2

Normally I would change the startup in users/NAME/library/application support
But in OS 10.8 there is no library visible in users. So I changed the startup that I could find, which was the one in the main library.

Beats Audio cannot find startup file (HP Omni 220)

When I try to access Beats Audio, I receive an error message stating that the startup file cannot be found.
Product name: HP Omni 220-1020a
OS: Windows 7 64-bit
This question was solved.
View Solution.

Hi,
Try using Recovery Manager to reinstall the IDT High Definition Audio driver ( this will also re-install the Beats Audio interface ) - details on using Recovery Manager to reinstall software and drivers can be found on the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&tmp_task=solveCategory&cc=us&dlc=en&lc...
After the re-installation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I cannot open Beats Audio. Get a, "Can not find startup file" message

I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon I get a, "Can not find startup file" message

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Creating custom startup file

Where is the existing default startup file in Illustrator CS5 located? I'm assuming once I find that, I can replace it with a custom file of my own so I can eliminate the preloaded swatches, etc. that get in my way?

There is no single default startup file; there are several. There are different startup files for different selections when you create a new document. Eash is a standard Illustrator file with different page size, colour mode, and palette items (swatches, symbols, etc.).
The location of the files depends on your OS. On the Macintosh they are in Users/[your user name]/Library/Application Support/Adobe/Adobe Illustrator CS5/en_US/New Document Profiles/

10g solaris 10 Release 2 startup file

I cant seem to find any reference to the startup file in /etc/rc3.d which I should use for solaris in the documentation. I am using the following which I found on the web . but it starts the database in "idle mode" I have to log in to sqlplus and run the "startup" command .
#!/bin/sh
ORA_HOME=/export/home/oracle/product/10.2.0.1.0
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start') # Start the Oracle databases and listeners
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart"
# su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
# su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole"
# su - $ORA_OWNER -c "$ORA_HOME/bin/isqlplusctl start"
'stop') # Stop the Oracle databases and listeners
# su - $ORA_OWNER -c "$ORA_HOME/bin/isqlplusctl stop"
# su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
# su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut"
esac

I dont understand this , the startup log says the database is open, but I cant connect :-
#### This is the startup log
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 2550136832 bytes
Fixed Size 1980808 bytes
Variable Size 553649784 bytes
Database Buffers 1979711488 bytes
Redo Buffers 14794752 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
/export/home/oracle/product/10.2.0.1.0/bin/dbstart: Database instance "mvm" warm started.
### end of startup log so i now try to log in
>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 16 19:38:36 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected to an idle instance.
SQL> select * from v$database
2 ;
select * from v$database
ERROR at line 1:
ORA-01034: ORACLE not available

CRIO startup directory was typed STARTUP and now will not boot. How do I recover from this error or how do I rename the directory when my proxy server is read only due no startup files?

I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.

lockmas wrote:
I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.
There is NO need to put your entire question into the subject line of your post.
cRIO will not boot is a suitable subject line

User has a "startup on login" pref that opens a file named "apple-scc-20111227-074257". Can't find any reference to this....any idea on what this startup file does or if it can be safely removed as a login-startup item? thanks.

Friend has a laptop running OSX 10.6.8, with latest software update 22Jun2012. One of the User's items to startup on Login is a file titled "
apple-scc-20111227-074257"
No idea what this does or where it is located.....any ideas on what it starts up and if it can be safely removed from startup items? Thanks for any info.

If you mouse over the item in your Login Items you should see a tool tip indicating where it is. Alternatively right (control) click on it and a contextual menu item, Reveal in Finder will be shown which you can select to open the folder containing the item.
By the way the 20111227 portion of that name looks like a date -- 12/27/2011.
I'm sure you can delete it. Nothing major is going to happen. But you really should find out where it is.
If Reveal in Finder doesn't show anything it may be because the file is invisible (which might be considered somewhat suspicious). In that case use the finder find command (command-f) and look for kind filename plus invisible. Or just use Find any File to find it.

CRS startup files

Hi,
This is a general question. I know that Oracle uses the pfile or spfile to startup the instance & the database. What files does CRS use to start up the cluster ? if the OCR and Voting disks (disks which have cluster configuration) are stored in ASM how will Oracle know cluster information before the CRS start & when the ASM is down ?
Thanks

Hi ,
Cluster uses below files ..
+ olr for initial startup for starting ohasd
+ Then after starting few daemons.GPNP starts up using gpnp profile
+ Then reads voting disks and starts up cssd
+ Then ASM starts up and opens OCR diskgroup.
+ it allows crsd to start
Regards,
Aritra

.DS_Store startup file

I have this invisible file that boots at startup an launches TextEdit with a document titled .DS_Store with the following text: Bud1

Should I be concerned that's it's still in my system?
_DS.Store files are present in every folder - they tell the finder how to display the window - and are quite normal. Quite what's happened here I don't know, but as it's a plain text file I shouldn't worry about it.

Linux startup file

Would you direct me to a FAQ or other documentation explaining where to
place commands to automatically (re)start Oracle Server when RH Linux (6.1) is rebooted?
(found a reference to /etc/rc.d/init.d,
tried creating a file named dbora, making
oracle "su" to issue commands, but had no
effect). TIA. Tom Brown Texas A & M-Commerce

I used this solution (I don't know, if it is "optimal" solution, but
it works good).
1. startup scripts
#!/bin/bash
# /etc/rc.d/init.d/dbora
# Startup and Stoping Oracle "Services":
# - Oracle RDBMS
# - TNS listener (tnslsnr)
# action <- for rc script: full messages (look in /etc/rc.d/rc)
ORACLE_TNS=1 # if 1 -> start TNS Listener
ORACLE_OWNER=oracle
ORACLE_BASE=/usr/oracle
. $ORACLE_BASE/.oraenv
ORA_SUBSYS=/var/lock/subsys/oracle # for RedHat "services"
if [ ! -f $ORACLE_HOME/bin/dbstart -o ! -d $ORACLE_HOME ]
then echo 'Oracle startup: cannot start'
exit
fi
case "$1" in
'start')
su $ORACLE_OWNER -c $ORACLE_HOME/bin/dbstart
if [ $? -eq 0 ]; then
touch $ORA_SUBSYS # Creating "flag": DB is running now
if [ $ORACLE_TNS -eq 1 ]; then
echo 'Start Oracle tnslsnr'
su $ORACLE_OWNER -c "$ORACLE_HOME/bin/lsnrctl start > $ORACLE_HOME/network/log/start.log" ;
if [ $? -ne 0 ]; then
echo "... error, check $ORACLE_HOME/network/log/listener.log"
fi
fi
fi
'stop')
if [ $ORACLE_TNS -eq 1 ]; then
echo 'Stop Oracle TNS Listener'
su $ORACLE_OWNER -c "$ORACLE_HOME/bin/lsnrctl stop > $ORACLE_HOME/network/log/stop.log" ;
if [ $? -eq 0 ]; then
su $ORACLE_OWNER -c ">$ORACLE_HOME/network/log/listener.log" ;
fi
fi
su $ORACLE_OWNER -c "$ORACLE_HOME/bin/dbshut" ;
rm -f $ORA_SUBSYS
esac
# end of dbora
... for RedHat is important:
- keyword action anywhere in script (for output messages on boot process)
- ORA_SUBSYS=/var/lock/subsys/oracle ... this variable and path: means an
sign about running service
As You see, my script dbora call one other script: $ORACLE_BASE/.oraenv
Here is the .oraenv script:
# .oraenv
ORACLE_HOME=$ORACLE_BASE/product/8.1.5
export ORACLE_HOME
# NLS_LANG='english_united kingdom.we8iso8859p1'
NLS_LANG='czech_czechoslovakia.EE8ISO8859P2'
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORACLE_TERM=vt100
LD_LIBRARY_PATH=$ORACLE_HOME/lib
PATH=$PATH:$ORACLE_HOME/bin
export NLS_LANG ORA_NLS33 PATH LD_LIBRARY_PATH
JAVA_HOME=/usr/local/jre
PATH=$JAVA_HOME/bin:$PATH
export JAVA_HOME PATH
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
SQLPATH=$ORACLE_BASE/local/sql
export SQLPATH
ORACLE_SID=ALFA
export ORACLE_SID
# end of .oraenv
2. link dbora to /etc/rc.d/rc[0136].d
You have to link dbora in this way:
ln -s /etc/rc.d/init.d/dbora /etc/rc.d/rc0.d/K11oracle
ln -s /etc/rc.d/init.d/dbora /etc/rc.d/rc1.d/K11oracle
ln -s /etc/rc.d/init.d/dbora /etc/rc.d/rc6.d/K11oracle
ln -s /etc/rc.d/init.d/dbora /etc/rc.d/rc3.d/S70oracle
And thats all.
I hope it is usefull.
Zdenek ([email protected])
null

Re: Startup files

Similar Messages

Maybe you are looking for