Re: STMS

Folks,
Does the BW folks will have access to STMS tcode in development system?
I do not have access to STMS, is there a way to re-import the failed transport? do I need to request basis to re-import the transport?
I had access to STMS in the past, recently they removed access to this tcode to all BW developers.
Thanks,
KK

HI,
Yes ,if you don't have authorization for this transaction STMS
ask your basis team to re import the reqest  as per your requirement
Re imports can be done
Regards
Hari

Similar Messages

  • STMS as background job

    Is it possible to run the STMS transaction as a background job? You might ask, why would you want to do this? Well, every week we make a Flash copy of our production system to system  I will call MF1. MF1 is then used for the next week as a "production like" system to test production break fixes and the like. The problem is, by default TMS is not turned on, on the newly created MF1 system.  Our Basis team never seems to remember to do that. Instead, they have asked me to develop a simple BDC session that can be scheduled after a certain event.  
    This seems like a simple enough request but is problematic. One problem is, this transaction can only be run from client 000 and as a developer I do not have an account there. Another is the fact that MF1 is not a development client and I am not sure if the screen mappings will be the same if I don't develop it there.
    Is this a totally wrong approach to the problem, or is there an easier way to Connect TMS without human intervention?

    Create and schedule a background job in SM36 for program RM06BB30 (ME59N) with a variant of ME59N that selects the requisitions you wish to convert to orders.  You can schedule this job to run once or periodically depending on your requirements.
    Regards.

  • Problem with the AF of my new 18-135mm EFS IS STM lens

    Hello,
    The lens came with the EOS Rebel T5i bundle.
    The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
     I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
    I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
    The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
    I updated the body firmware and the problem continues.
    Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
    I will go into an important trip next week, therefore I will not have time to send the camera to repair.
    Any idea?
    Thanks!

    You may want to rent a lens for your trip and get this lens to service.
    You'll want to be sure it really is a problem with the lens (it sounds like it is from your description).  Test the lens against a "flat" target (such as a wall).  You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod.  The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
    Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus).  This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic.  The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.)  I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
    If the lens is consistently focusing closer, then it will need service.  
    Tim Campbell
    5D II, 5D III, 60Da

  • Rebel T4i Kit with 18-135mm Lens, STM lens like Amazon?

    Amazon has it for the same price, but I noticed it is listed as the STM lens, which is a new lens specifically built for the t4I.
    Bestbuy has it listed for the same price, but doesn't list it with STM.
    No point in buying the same camera with an older lens from Bestbuy when you can get the same one from Amazon with the new lens.
    Hope this can be clarified.
    Canon - Canon EOS Rebel T4i 18.0-MP Digital SLR Camera Kit with 18-135mm Lens - Black
    Model: Rebel T4i Kit with 18-135mm Lens | SKU: 4839135
    Built to make advanced photography simple and fun, the new Rebel T4i comes loaded with an 18.0 Megapixel CMOS sensor combined with the powerful DIGIC 5 image processor, an extended ISO range of 100–12800, continuous shooting up to 5fps, and an 18–135mm image-stabilized zoom lens. When shooting HD video, Movie Servo AF provides continuous focus of moving subjects. The vari-angle touch-screen 3.0-inch Clear View LCD monitor II allows fast and intuitive camera operation. Add compatibility with Canon?s proven EF and EF-S lenses and a slew of EOS accessories, the Rebel T4i is an incredibly versatile tool for creating the images and videos you envision.
     5 Read reviews (1)
    Sale: $1199.99
    Solved!
    Go to Solution.

    What is the status on the availability of this product? SKU (SKU: 4839135) is on the website but it states for store pick up only.  When you select a store, any store for that matter, it shows as unavailable.  it does not state the item is on back order.
    Why is the item even on the website?

  • How to add a new system in existing 3 system lanscape in stms

    Hi,
    we have 3 system in our STMS i.e Dev->Qua->Prod. now we have install one more quality system for business requirement and add the same saystem in stms.
    now my query is that how we can add this new system in existing transport route so that transport request can be added automatically to import queue of both quality system once released from development system.

    Hi Nadar,
    It is possible, But not recommended. Better if you have solution like...
    DEV-->QAS1-->QAS2-->PRD
    But it is possible by using transport groups. There are lots of posts aleady regarding this.
    Basis Stms Configuration Notes
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/4-system-landscape-stms-2712918
    4-system landscape
    STMS config for dual prod (w/ auto synch)
    Thanks
    Asad

  • Import All Scheduling error in STMS

    Hi,
    In STMS  wanted to reschedule a periodic import all job but am unable to.
    All I get is the below error.
    "Import for system QE1 already scheduled"
    I had deleted the import job created earlier using sm37-->select job and delete.
    Nothing helps.I am unable to schedule an import all again.
    Thanks
    Vighnesh

    You can remove the job clicking on the "delete" button....
    To reschedule the job follow intructions on SAP  Note 398589
    Regards
    Juan

  • Error while importing crystal report request K900529.R21 using STMS

    Hello,
    While importing in sap BI system through STMS, request K900529.R21 getting the following error :
    Transport control program tp ended with error code 0212
    Errors: could not access file as supposed (see dev_tp or S
    DETAIL ERROR DESC
    This is tp version 372.03.35 (release 700, unicode enabled)
    INTEL\sapmnt\trans\cofiles\K900529.R21 for transport: R21K900529: Per
    HALT 20080124213745
    ERROR:
    INTEL\sapmnt\trans\cofiles\K900529.R21 : cant open
    : Permission denied
    ERROR: EXIT(16) -> process ID is: 7048
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 16
    ERRORS: Highest tp internal error was: 0212
    standard output from tp and from tools called by tp:
    Thanks,
    Ravi

    Hi Ravindra,
             Welcome to SDN......
    Check  for authorizations.
    Thanks,
    Vijay.

  • Error in WB Request while Transporting on STMS

    Hi all,
    I have a WB transport Request for my Report, where the Request contains Data Elements, Programs, SE11 Table, TMG, Screens, Tcode related to my development. Now, while moving the request from DEVELOPMENT  to QUALITY system on STMS, it ended with ERROR 8.How can I know, in which object there is an Error while transporting.
    My error is shown as..
    Generation of Programs and Screens  --- (8) Ended with errors

    Dear Sekhar,
    I think some object or component is missing in transport request, like function group, screen parameters or any one in your program. Activate all  objects and resend dev to qas. If again same issue, you delete the request and generate new request.
    Best of luck.
    Regards,
    Abbas.

  • Error while configuring STMS

    Hi
    While configuring TMS ,
    I just entered STMS. in 000 client. it pops up a dialog box with details like DOMAIN_CFG and after that i tried to save same. It has give me error that  The password must contain at least 3 digits (0-9)
    Can any one help in this regard.

    HI Atul,
              When you enter STMS for the first time it will create the DOMAIN_CFG
              domain group and tp config file and all the required rfc's like
              tmsadm@domainname and other.It will not ask any password.
              Can u be clear with ur question exactly what problem ur getting?
              Is this the first time you are trying to configure stms or you want to move
              your domain controller to other system.
    Reward points if helpful.
    Regards,
    vamshi

  • STMS: Transport control program tp ended with error code 0232

    Dear ERP Gurus,
    I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
    Transport control program tp ended with error code 0232
    Errors: connect failed
    The tp System log says:
    ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
    I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
    Any idea why I am having this problem? Imports were running fine yesterday. Please help.
    Your prompt response is highly appreciated.
    Thanks a lot.
    Best Regards,
    Albert

    Hi Albert,
    First check import monitor and delete all requests from queue, which are still getting imported.
    And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
    Then kill all OS jobs which are getting execute with tp.
    Check all jobs are runnig fine, related to transportation. If not reschedule the same.
    Then start importing.
    Before doing this just check whether your stms related RFCs are working fine.
    I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
    Regards
    Nick Loy

  • STMS not working

    hi all,
           STMS (  Transport Management System)  is not working , The below error occurs while using the   transaction, Error : Transport control program TP ended with error code 0212
           can anybody give a Solution for the problem .
    Thanks,
    S.Gayathri

    hi,
    This is purely a basis issue they can resolve this easily.
    There might be some problems in connection between servers which will trigger this message.

  • Stms configuration

    HI all,
                   I am trying to import the data from dev server but i got the error message " Transport control program tp ended with error code 0212"  Errors: could not access file as supposed (see SLOG for more info) i think its becase of the configuration problem in stms plz help me to configure the stms correctly plz tell me the procedure.

    hi
    i am  also faceing same problem  .
    i have check and obsrverd that all the   transport request that are released from dev --->qas  which is having   sidadm (owner)permission (rw-rw ) this can be imported in system
    which i am trying to import the request  is having root (owner) and permission (rw--r)
    which i can not  import into the system
    i have to chage the permission to rw--rw manyally
    how to change the owner ship of the transport request .
    regard
    prasad

  • RFC error when trying to add transport request in queue in STMS..

    Hi,
    When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
    But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
    What may be the issue  ? I really need some light on this..
    Regards,
    Rajesh.

    Hi Rajesh,
    At times when u try to add the TR to a queue there would be 2 reasons.
    1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
    2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
    A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
    Hope it helps.
    Br,
    Sri
    Award points for helpful answers

  • Change Management and Target Group in STMS

    Hello, We use the Change Management (SolMan 4.0). Up to now it works fine. We deliver always one client in the System (E33.002; T33.002 and P33.002). Now we try to change this. We will deliver more than one client in every system at the same time (to have always the same status in every client). So we use Target groups in STMS. This works fine if I do the transports manualy. But if I try to do it with the change management it doesn't work. The change management still deliver one client (002).
    Can someone give me a hint?
    Best regards

    Hi Jose,
    check below link.
    Leads not getting created via ELM
    Rgds
    Hari

  • How to find out which User id used to import Transport Request thru STMS ??

    Dear Experts we have  6 BASIS Consultants in our org with STMS authroizations.
    In every day we review Imported Transport request thry Import History Option in STMS.
    Our requirement is which request is imported by which BASIS Consutlant thru STMS?
    Thanks for your replies in advance
    Regards

    Hi,
    You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
    Best Regards,
    Srividya.R

  • STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

    Hello All
    i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
    System   EC2              Command  TMS_PM_DISTRIBUTE_PROFILE
    Client   000              Service  tp Profile Service
    User     TMSADM           Start    Online
    Date     20.10.2009       Function TMS_PS_WRITE_PROFILE_TO_DISK
    Time     17:36:23         Message  SET_CODEPAGE_FAILED
    description : Could not start transport control program tp
    detail error is as below if i press on more information
    Could not start transport control program tp
    Message no. TP608 Diagnosis
    There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
      Error code: 4
      RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Meaning of the error codes:
      03  RFC system failure
      04  RFC communication failure
    System Response
    The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
    some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
    i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
    The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
    everythign is fine except below entries
    under RFC destination
    EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check  that partner exists
    under TP call
    RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
    Can anybody please help me on the same.
    Mani

    Hello All,
      thanks a lot for you reply, i want to clear some point here
    - I have no other physical attached to the system, i created other system as virtual system.
    - to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
    - to Anil .. i did as u said but nothing changed after that.
    here is the log from trans log file
    4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 20.10.2009 - 17:37:33
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans.exe -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Tue Oct 20 17:37:37 2009                                               12584  0.012584
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                        65  0.012649
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                401  0.013050
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    4 ETW000                                                                                160  0.013210
    2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
    i have dbms/type = mss in profile parameters
    I am still getting the same error.
    Mani

Maybe you are looking for