RE: Support Pack installation

Hi,
I'm not a BASIS Consultant. But I'm trying to install a Support pack in the BW System.
Here are the steps that I'm following. But there is some issue with the support pack installation. Can anyone guide me where I'm wrong.
Basically I'm trying to install the SP6 for the BW system so that I can install the BPC 7.5 NW SP6 on the BPC side.
1. SAINT
2. Load packages from the FrontEnd
3. Selected the package, open, decompress.
4. the file is extracted to the C:\usr\sap\trans\EPS\in folder.
5. run>cmd>SAPCAR -xvf K-75006INCPMBPC.SAR
6. The file is extracted to the C:\usr\sap\trans\EPS\in folder as CSR0120031469_0050776.PAT
7.Then I click on Installation Package>Load Package>From Application Server
8. This is the message that I'm getting.
Message Text OCS file already exists in inbox. Upload not required.
9. I do not know where I need to correct myself. Is there any guide or can You show me where I should search about the SP6 installation on the BW system.
Thanks,
Siri.

Hi Very sorry for the late reply.
We used T-code SPAM for upgrading the SPAM level to 43
We are on BW 7.01 SP5
Now we were able to install the Support Packs.
When I go into the
1.SPAM
2. Imported Suport Packages
3. Display
4. Under CPMBPC
5. It shows SAPK-75008INCPMBPC CPMBPC 750: Support Package 0008
With this I assume that the BPC 7.5 NW System has the Support pack 8.
Then I uninstalled the BPC Server by going into the Add/Remove Programs.
Then I downloaded the BPC 7.5 NW Files   BPCSERVER08_0-10009080.EXE and BPCSERVER08P_2-10009080.EXE
I installed them on the server where the BPC is installed.
Everything is fine until now.
But when I'm trying to restore the SAP_IFRS Appset, (BPCNWSKIFRS00_1-20007298.RAR) , these were the steps followed as per the guide.
1. T-code UJBR
2. Select the Appset from the Front end.
3. Named the Appset as SAP_IFRS
4. Selected the 3 checkboxes
   (a) Restore Metadata Tables
   (b) Restore Master Data
   (c) Restore Transaction Data
5. Selected the Record Count to 0
6. Hit F8
7. I got the errors below
8. Not all Info Objects Can be Read.
9. Invalid Attribute name (MBR__SEQ) in Dimension INTERCO
10.Master Data Load for Dimension INTERCO ended with ans error
11. Invalid Attribute Name (MBR__SEQ) in Dimension OWNACCOUNT
12. Master Data Load for Dimension OWNACCOUNT ened with an error.
13. Master Data Load for Dimension RPTCURRENCY ended with an error
All in all out of the 64 tasks 41 failed and 23 were successful.
Can anyone please help me on this.

Similar Messages

What are the key components to be mointored after support pack installation

I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Hi,
1) If CCMS is configured then you can monitor this as well (RZ20)
2) Keep an eye on Queues
Regards,
I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

ABAP + Java Support Pack installation

When updating support packs in an ABAP+Java environment (ECC 6.0), is there any reason why one could not do the Java Support Packs first, followed by the ABAP support packs? We are trying to update our support packs as efficiently as possible, and would like to update our java support packs first, followed by the ABAP stack a few days later.
In regards,
Michael

Hi!
There can probably not be a general answer to that question. There are some functionality where ABAP and JAVA are closely linked and where you'll most likely run into problems if the levels do not match.
Technically there is no problem as applying the SP-Stack for Java and applying SPs for ABAP are independent (technical) tasks, but you will have to VERY carefully check the dependencies and carefully test this in a QA-environment.
If you want my advice: Try to find a 'big shot' solution where you do all in one move.
Regards,
Jörg

Service Pack Installation

Hi guys,
I know this answer, but I can't remember it.
Are SPs incremental, or comprehensive? I have to take a GRC product from a lower service pack to the latest, and there are about 4 packs in between. I forgot whether I need to do each one, or just the final one.
Sorry - I should know this. Also, does anyone have a slide deck (from Frank Rambo, perhaps) on 5.2 service packs?
Thanks,
Santosh

Santosh,
SP for JAVA: You can go to the latest one (cumulative)
SP for ABAP: You have to install them sequentially (incremental).
Relevant SAP Notes:
SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
SAP Note 1352498 - Support Pack Numbering - GRC Access Control
Hope it help. Best regards,
Imanol

Error in Support Package Installation

Hi ,
I am trying to install "SAPKIBIIIH" in SAP BI using Tcode :SAINT.
OCS Package :SAPKIBIIIH
Package Type :Installation
Software Comp:BI_CONT
Release : 703
After giving the OSSNOTE PASSWORD for SAPKIBIIIH, the installation is starting but after some time it is failing as :
Error in phase : Disassemble
Reason for Error : PATCH_FILE_READ_ERROR
Return Code :12
I have uncar the support pack through CMD, and kept the .ATT and .PAT files in \eds\in folder.
I tried all types of possibilities...
I am using Add-on Installation Tool version 7.00/0020 -for "saint"
Please help...
Thanks in advance.
Regards,
Vamsi
Edited by: Vamsidhar A.V. on Oct 19, 2008 5:58 PM

Hi Vamshidhar,
Check whether the option of disassembling data files is switched on.
Go to transaction SPAM
Go to Extra --> Settings
Check whether the user <sid>adm has write authorization for the
directory /usr/sap/trans/cofiles.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly.
Regards,
Anil Kumar CH

SB Audigy Series Support Pack 5.3 (02/24/2015)

This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.

Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio.

Open data extraction orders - Applying Support Packs

Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NK

The exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.

SB Audigy Series Support Pack 3.1 (OUTDATED)

<p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
<p align="center">[color="#ff0000"]Use it at your own risk.
Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
?Vista?SP2 / XP SP3
Included in the pack:?
- Audigy series driver 2.8.00.8 (latest beta)
- ALchemy .30.00
- Audio Console .32.02
- DDL and DTS Connect License Activation 2.00.03 (*)
- Dolby Digital Li've Pack 3.00.03 (*)
- DTS Connect Pack .03.04 (*)
- EAX Console 3.00.56 (Windows XP only)
- Graphic Equalizer 2.00.65
- MediaSource DVD-Audio Player 2.00.78
- SoundFont Bank Manager 3.2.00
- Speaker Settings 2.00.60
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
[img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
Fixes and improvements:
- Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
- Fixes the enhancements errors in Windows?mixer and Windows Media Player.
- Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
- Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
- Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
- Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
- Workarounds a bug that?unexpectedly resets the?speaker configuration.
- Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
- Implements Hardware CMSS Headphone by using a workaround.
- Updates all InstallShield setup scripts to support Windows 7.
- Fixes installation INI to properly install applications depending on the detected OS.
- Removes COM workaround for Equalizer, fixed by Creative.
- Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
- Updates shared modules, responsi'veness on certain applications is improved.
- Enables CMSS2 and Stereo Surround.
- Fixes 32-bit ASIO not working on Windows 7 x64.
- Fixes Encoder not available on Windows 7 x64 (related to fix above).
- Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
- Properly adds support for 64-bit OpenAL and 64-bit ASIO.
- Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
Undocumented fixes by Creative (not listed in the release notes):
- Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
- Fixes Equalizer Out of Memory error.
- Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
- Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
- Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
- Restores missing Microphone option in Surround Mixer (documented).
- Fixes Microphone mute, volume and +20db boost controls.
[size="3" color="#000000">?
[size="3" color="#000000">Release Notes:
Windows Security warning during driver installation
When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
OpenAL 2D benchmark in RightMark 3DSound crashes your system
Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
6. Speakers?incorrectly available on Windows 7 64-bit (x64)
Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
Do not choose that mode as it causes sync issues with Windows mixer.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows 7 / Vista / XP
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows 7 / Vista (requires Service Pack )
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Advanced EQ and Special FX not available on Windows 7 / Vista
These presets don't work on Windows 7 / Vista.
There is no sound in games with OpenAL support on Windows XP
Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
Equalizer settings are lost
When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are reset when speaker configuration is changed
Bass and treble settings are reset when speaker configuration is changed.
DTS Encoder Switcher
The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
Thoroughly read the ReadMe.txt file included before using the provided?utilities.
Hardware CMSS Headphone
To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
Playback Devices -> Speaker Properties
Now check the Speaker configuration in "Playback devices".
If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
Microsoft Audio Home Theater Effects
This driver adds the following audio effects, which are available depending on the current speaker configuration:
- Bass Management
- Speaker Fill
- Room Correction
- Loudness Equalization
- Bass Boost
- Virtual Surround
- Low Frequency Protection
Some effects are also available for the "SPDIF Out" device.
Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
Windows MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
Download:
New version available here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
All files are property of Creative Technology Ltd, unless otherwise noted.

IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
blunden wrote:
EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
http://www.mediafire.com/download.php?rjmznqa2oy
Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
Fixes an issue that prevents Speaker Fill from working.
There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

Error during application of scm 7.0 support pack

While applying support pack to our SCM 7.0 system (New Installation),
We encountered a SPAM error in xpra_execution phase, due to automatic
termination of job RDDEXECL scheduled by user id DDIC on client 000.
The details of the error are:
Message id: Brain
Message number : 366
Message type: A
Error: Error during SID assignment for characteristic 0REQUID (current
value 2)
We had a look at few notes mentioned by SAP support on 1319241. which
specifies a solution as
u201CIf you encounter the error message above, please run the Elementary
test - Compare Number Range and Maximum SID - for Master Data 0REQUID
in transaction RSRV. When it turns red, the error can be corrected by
pressing the "Correct Error" button.u201D
But we are already getting the light as green in the elementary test
for the Master Data 0REQUID in transaction RSRV, though we still
execute the same and problem is still the same i.e. RDDEXECL
program/job is getting terminated.
Regards
Edited by: pranav kumar on Feb 25, 2011 8:20 AM

Hi SM
Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
Regards
Pranav

Error in installing BOE3.1 Support Pack 6

I have just installed BOE3.1 on Window x64
and i would like to install the BOE3.1 , support pack 6
But after double click the setup.exe
following error message appear :
"The installation source for this product is not available. Verify that the source exists and that you can access it."
Anyone know how to fix it?
Thanks.
John

BOE 3.1 Support pack 6? I gues the last SP for 3.1 is SP3
-Ashwini

BI 7.0 and ECC 5.0 support packs

Need help getting started with BI. We are investiagting a new installation of BI 7.0. It will be integrated with an existing ECC 5.0 R/3 system. Does that ECC 5.0 R/3 have to be at a certain support pack or kernel level?
If yes, where do I find out what level?
Thanks in advance, Jay

Hi, ECC 5.0 use Netweaver 2004 and BI7 Netweaver 2004s then :
In ECC 5.0 :
Make user and not supere the 8 chars, password is UPPERCASE not more the 8 Length.
In BI7 :
Make user normaly and remember in BI7 UpperCase and Low Case is used.
Bye.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

XI Install - ABAP Support Packs + J2EE Support Package install

Hi
I am wondering what is recommended sequence for installing/upgrading kernel, ABAP Support Packages & J2EE Support Packages for XI installation.
Should we install/upgrade kernel, ABAP Support Packages & J2EE Support Packages before XI 3.0 is installed? Or should we install these only after installing and completing post install steps of XI 3.0.
The Web AS install guide recommends to install the patches immediately after installing it, but prerequisite for XI install is Web AS SR1 i.e SP9(ABAP + J2EE.
Any suggestions in this regard would be highly appreciated.
Regards
Chandu

Hi Shravan,
Thanks for the response.
I have already gone through the note. According to the note, I assume the following sequence has to be followed:
Install SAP Web AS (ABAP)
Install SAP Web AS (Java)
XI Install & post install steps
Support Pack Stack for ABAP & Java
XI Patches
However, when carrying out post install steps after XI installation, I am unable to perform some steps. Also, there is an issue with J2EE engine after XI install.
Further, I have installed and completed post install steps as per following successfully:
Install SAP Web AS (ABAP)
Install SAP Web AS (Java)
XI Install
Support Pack Stack for ABAP & Java
Post install steps
XI Patches
What are the implications of applying ABAP & Java patches before XI install or before completing post install steps.
Regards
Chandu

PeopleSoft HRMS 9.1 Feature Pack Installation(thread 911549)

PeopleSoft HRMS 9.1 Feature Pack Installation(thread 911549)
I have successfully installed all the softwares of PeopleSoft HRMS: Upto step 7
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql.aspx
Step8: Installing and configuring PeopleSoft Databases: I am facing problem at please enter the SQL Server information screen:
I am getting the error in the next step of please enter the SQL information where it asked the admin password, peoplesoft Access password, peoplesoft connect password
please find the error which I have received in the below the error:
"setup fails to connect the SQL server in the system. The error message is:noerror. Please make sure SQL server is running in the system. The minimum supported version is SQL server 2008. Please go to the previous screen to correct the problems or 'cancel' to exit."
Please advice me how to proceed this and move forward asap.
Please also let me to know where I use this password for All Products License Keys for PeopleTools Install CD : z66smq22c7mc3w444e12is23481p1f7.
I almost completed this step but found error at the last.
My OS: Windows Server 2008 R2, Database Server: MSSQLSERVER2008 with service pack2
Please help me out so that I can Install the software immedaitely. Please let me all the neccessary scenarios. Please let me if you any other clarifications.
Regards,
Vijay

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

EHP5: What are prerequisites relative to ERP/EHP, & NW support packs

We understand that ERP EHP5 is going into Ramp Up in December, 2010. To add EHP5 to our environment, what are the minimum support pack levels for ERP (we are currently under EHP4 support pack 4, moving to 7), as well as any other support pack level dependencies for NetWeaver? (In other words, what are the "jumping off points" from previous support pack levels?)
Any estimate of General Availability for EHP5?

Hello,
Based ón the current support pack level EHP5 stack will be generated with pre requisites .
You have to maintain the data in solution manager.
EHP Installer will take care rest of the things like notes tobe implemented , SAINT/SPAM versions.
regards
Vagesan

RE: Support Pack installation

Similar Messages

Maybe you are looking for