Re: Svet's Fermi/Kepler VBIOS/EC Tuner - [ver: 3.03x]

Hi svet just donated and got the program but its not working properly need your help. I got 2 asus gtx 560 tis direct cu II cards. They are watercooled so very good on the temps. Problem is tho when I choose core tuning its throws a 1536 at me for core...

Quote from: Chike on Today at 19:34:53Have you tried reseating the card?
Does the card work in the PCIe 2.0 x16 slot?
yes the card was working in it i have tired 3 cards and it dont work

Similar Messages

  • Svet's Fermi/Kepler VBIOS/EC Tuner - [ver: 3.00u]

    VBIOS Flashing and Safety Procedures:
    Always make a VBIOS backup, before start messing with your VBIOS!!
    You can do this with GPU-Z: http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
    or with Nvidia Flash Tool[under windows]: http://www.techpowerup.com/downloads/2258/nvflash-5-142-for-windows/
    command line to take a VBIOS backup:
    nvflash.exe -b org.rom [ENTER]
    command line to flash your modified VBIOS from cmd:
    nvflash.exe -4 -5 -6 mod.rom [ENTER]
    Where:
     org.rom is the name of your original VBIOS
     mod.rom is the name of your modified VBIOS, you can replace it if needs with your name,
     but file extension must end to .rom [etc: another example: mybios.rom or similar]
    Before start flashing your VBIOS:
     * Close all applications that are currently running and can be closed!
     * Close especially any Antivirus Scanners and any other resident scanners!
    Those steps are need to prevent and avoid VBIOS update interruption.
    DO NOT TURN OFF OR REBOOT MACHINE DURING THE FLASH PROCESS!!!!!
    A bad flash will probably turn your VGA into an unusable state.
    When something goes wrong during the VBIOS update like:
    Lost electric power, PC crash or reboot
    That will stop your machine from booting!
    IF this happened you have to perform a VBIOS recovery.
    Miscellaneous:
    Q.: How do i turn off the robot voice mentor? [as i don't want such]
    A.: You can mute the Tuner once is running from your mixer. The changes will be remembered for next Tool's usage.
    F.A.Q:
    Q.: I can't start the Tool, i've received followed error on start attempt. How i can fix it?
    A.: As mention in the error message itself, you need to log-in in your Windows with account who has administrative rights.
    Once done, the error will no longer occur.
    Q.: How can i check my VBIOS properties before change them?
    Q.: I've maded the desired changes and customised my VBIOS with the Tuner,
    but how can i verify that's done properly?
    Q.: How i can check that my VBIOS is healthy before modification?
    Q.: How i can check that my VBIOS is healthy after modification?
    A.: You can click on "VBIOS-Z Report" to check and verify current VBIOS parameters.
    It will shows current states based on your current modifications [or if you haven't modified anything yet, will shows VBIOS original parameters],
    along with healthy status.[OK/Not OK]
    Examples:
    Loading original VBIOS file:
    and executing scan report 1st:
    VBIOS-Z Report engaged:
    closing the report and proceed with VBIOS modification, for example let's modify GPU core freq.,
    by clicking on Core Tune.
    Core Tune engaged:
    [Let's say we want to set 900MHz core speed.]
    All is done very simple, very quick and very easy. Everything is done automatically.
    All you need is to enter desired new core speed, the Tuner will do the rest with all necessary changes.
    Closing this thread and executing VBIOS-Z Report again after our modifications:
    And we check that our desired new core speed is now applied,
    and that all others related parameters changed respective.
    We also see that the BIOS is healthy as expected and now we can save and flash our modified VBIOS.
    [If you want to modify more stuffs, just go to main screen and adjust others desired parameters, when its done you can save your VBIOS]
    Example if something is wrong with VBIOS image, [i've damaged the vbios image with sense then scan it with the tuner]
    scan engine will report it and you can read it along will turn to red background:
    If you receive such red background color[you also can read the VBIOS is corrupted] by any chance,
    you shall not flash your VBIOS with this image.
    Q.:  I just want to check VBIOS-Z report, without to do any modification over the VBIOS image. Is this possible?
    A.: Yes, when you click on "Save & Exit" button you will be asked if you want to save VBIOS changes to your image or not.
    If you answer will "No", original scanned VBIOS image with regardless modified or not will be keep intact as is.
    [Etc: Even with changes done over it, they will be ignored and they will be not written to the VBIOS image]:
    If you want to save your changes, then you should answer with "Yes", then will receive an final message:
    Q.: I've modified my VBIOS Image, but i noted that after the modification my VBIOS Image size is now changed.
    Is this a normal?
    Should i concern about anything?
    I've re-scanned my modified VBIOS image with changed size with Tuner's "VBIOS-Z Report" and its still shows a green light.
    Can i proceed and flash it?
    Why this happened and why the size its changed after the modification?
    A.: Yes, its a normal and there is nothing to worry about. As long its shows green light its OK to proceed with VBIOS flash.
    This VBIOS size change can occur in some cases[not all] when VBIOS image is saved by GPU-Z.
    Tuner will auto detect if there is a padding issue while scanning the VBIOS image and will auto correct it,
    and will save modified VBIOS image with new geometry based on his original expected size.
    Q.: Is it necessary to run VBIOS-Z report either when i load my BIOS or after i made a modification over it?
    A.: Nope, its optional, but its recommended to execute the report to check your VBIOS parameters after the modifications[before 'Save & Exit'] and also to ensure that your VBIOS is healthy.
    Q.: When i start some of Tuner's threads the main interface is halted. Is this a normal?
    A.: Yes, its a normal. Its require to prevent parallel workers to run at the same time.
    Etc: when some of the workers is engaged, all others cannot be started until the worker which is currently in progress is finished.
    Q.: I've started a thread to make an VBIOS modification, but i clicked the wrong thread.
    Can i exit from this thread without made any modifications?
    A.: Yes, you can. When user input is requested, answer with "Q" or "q" and press ENTER.
    This will abort current operation.
    Example:
    Q.: How can i check the parameter before i change it without executing VBIOS-Z report?
    A.: Just go directly to what you want to modify, the co-respond thread will detect and show you current detected value before asking to enter your newest desired value(s)
    Q.: Is there any shortcuts that can be used from the main interface?
    A.: Yes, they are as follows:
    "R" ==> VBIOS-Z Report
    "C" ==> Core Tune
    "M" ==> Memory Tune
    "F" ==> FAN Tune
    "V" ==> Voltage Tune
    "A" ==> Max Voltage Limit
    "P" ==> Power Control
    "X" ==> Save & Exit
    Q.: Seems i hit my GPU core OC limit for my mobile video card. Can you do something more?
    A.: You can try Alternative asynchronized GPU clock booster instead, when you hit the wall/limit of GPU core OC.
    This can help you to fine tune your GPU freq. and to drain the maximum potential from it.
    [Pickup Mode 2 when asked, when you execute GPU core adjust for your mobile GPU]
    More details about newest feature added:
    The newest alternative GPU clock booster is only available for Mobility Series.
    It can help you to fine tune your GPU clocks and to reach the maximum OC potencial of your GPU.
    The newest mode is known as Mode 2 [Asynchronized], and will appear when you go for GPU core adjust.[only when you adjust Mobility VBIOS]
    For example when you reach say 800MHz for GPU core, [with normal Synchronized mode 1]
    and say further 810MHz is unstable, at this point you can try to boost it to 810MHz but by using Mode 2 instead.
    Then to retest. If become stable you can continue above by using Mode 2.
    Which one will be fastern Mode 1 or Mode 2 GPU core adjust?
    If we are talking about the same GPU frequency, Mode 1 should perform fastern.
    In Mode 2 GPU boost, its possible to reach higher GPU core frequency compared to mode 1.
    Best use Combined mode. I.e.:
    From Original BIOS:
    Start GPU core adjust with Mode 1 [Synchronized],
    until you reach unstable state.
    Mode 1 booster automatic adjust GPU core along with LTC and XBAR frequency,
    by using the same ratio as is original VBIOS and to keep it synchronized GPU core frequency.
    By using this mode should bring you best peformance.
    Let's say we hit the wall with Mode 1 booster [vbios: mod1.rom]
    Then we continue modify from our progress from vbios: mod1.rom,
    but using Mode 2 booster instead and to apply the new higher GPU core frequency.
    And to retest.
    Mode 2 booster is adjusting GPU core frequency only, keep it asynchronized with LTC and XBAR frequency.
    So if LTC and XBAR frequency is holding back the main GPU core frequency,
    this mode will help you to drain the maximum from GPU core.
    Resulting in mod2.rom [comes from mod1.rom]
    By combining Mode 1 booster, [until hit the wall] then continie with Mode 2 booster,
    we can opimize our GPU at maximum potencial of  GPC, LTC and XBAR frequency.
    Q.: When i turn on or reboot my computer, my Kepler based graphic card become annoying noisily like Jet Fighter takeoff.
    Is there any way to make it quiet or/and to control it by desired way?
    A.:Yes, run FAN adjust thread, then choose Mode3 [Configure boot Fan Duty PWM] and set your FANs to desired levels when they works outside Windows.[not controlled by VGA driver]
    This adjustment also will affect cards equipped with Dust Removal Technology.
    So keep in mind that setting the FANs Duty to too low value may cause Dust Removal Technology to has not much effect,
    due not enough turbulence to perform dust cleanup when FANs perform reversal spin.
    Sample usage:
    Let's say that we want to apply the followed values for our 570GTX card:
    [check VBIOS-Z report before modification]
    1st: We want to set Load voltage to 1062mV
    2nd: We want to adjust FAN speed as followed: min: from 40 to 24, max: from 80 to 100
    3th: We want to extent the max voltage limit Load voltage from 1.1V to 1.175V
    4th: We want to adjust and apply memory clock from 1050MHz[real] (4200 effective) to 1070MHz[real] (4280 effective)
    5th: We want to set core clock from 786MHz to 809MHz
    [check VBIOS-Z report after modification, to ensure that desired paraters are now applied and we can see how it will effect all other parameters along with calculated new performance settings based on our newest VBIOS modification and also verify and ensure that VBIOS integirity is OK before save and flash our custom and modified VBIOS]
    Here we go:
    Tuner's Features:
    *  Full automatic, very quick and easy to use
    *  Support 3D[underload] core clock adjusting
    *  Support 3D[underload] core voltage adjustment
    *  Support 3D[underload] core max voltage adjustment
    *  Support FAN adjustment
    *  Support 3D[underload] memory clock adjusting
    *  Special support for Mobility Series, allow P0,P1,P8 states modifications
    *  Can detect, calculate, supply information about:
        - current checksum
        - calculated checksum
        - automatic correct checksum per each thread
        - detect VBIOS images
        - detect VBIOS structure
        - self correct VBIOS image if needs
        - can repair damaged VBIOSes checksums [etc: load vbios image with bad checksum, Tuner can auto fix it]
        - detect and supply info about Image  Build Date
        - detect and supply info about Version ID
        - detect and supply info about Modification Date
        - detect and supply info about image geometry
        - detect and supply info about active P0 State
        - detect and supply info about FAN min/max values
        - detect and supply info about 3D underload voltage [2 modes: vary in range, or enforced one]
        - detect and supply info about max 3D underload voltage
        - detect and supply info about GPU chip and video card itself
        - detect and supply info about Image  File Version[Only on MSI graphic cards{when detected, detection is automatically}]
        - detect and supply info about SS Dynamic Ratio
        - detect and supply info about L2 Cache Clk Crossbar Sync
        - detect and supply info about Core clock
        - detect and supply info about Processor Cluster clock
        - detect and supply info about LTC2 Frequency
        - detect and supply info about XBAR2 Frequency
        - detect and supply info about Real Memory Clock
        - detect and supply info about DDR5 Memory Clock
        - calculate and supply info about VBIOS Memory Bandwidth
        - calculate and supply info about VBIOS Texture Fillrate
        - calculate and supply info about VBIOS Pixel Fillrate
        - calculate and supply info about VBIOS FLOPS
        - calculate and supply info about VBIOS Fermi L2 Cache Bandwidth
        - supply info about Fermi L2 Cache Size
    * can proceed MSI's Power Editions
    * support special DCII VBIOS images with EPU extension [both with and without padding]
    * VBIOS-Z Style:
      {We can check and see the performance of the video card based on VBIOS scan,
     without having the card front of us and also we can modify desired parameters and to see how they will affect the performance without flashing the card or when don't have the card which belong this VBIOS}
    * Auto determine, calculate and adjust LTC2 Freq., XBAR2 Freq. and Processor Cluster Freq. based on our newest desired GPU core clock speed.
    Current Supported VGAs VBIOSes:
    Nvidia Graphics cards from Fermi Series:
    590GTX
    580GTX
    570GTX
    560GTX-Ti 448
    560GTX-Ti
    560GTX
    560GTX-SE
    550GTX Ti
    GTX 480
    GTX 460
    GTX 675M
    GTX 670M
    GTX 580M
    GTX 570M
    GTX 560M
    GTX 470M
    GTX 460M
    GT 555M
    GT 635M
    [635M used in ASUS K75VJ-TY087H is NOT Supported]
    Quadro 4000M
    Nvidia Graphics cards from Kepler Series:
    GTX TITAN
    GTX 780
    GTX 780 Ti
    GTX 770
    GTX 690
    GTX 680
    GTX 670
    GTX 660 Ti
    GTX 660
    GTX 660 OEM
    GTX 650 Ti
    GTX 780M
    [for details refer to GTX 780M  feature details below]
    GTX 770M
    [for details refer to GTX 770M feature details below]
    GTX 765M
    [for details refer to GTX 765M  feature details below]
    GTX 760M
    [for details refer to GTX 760M feature details below]
    GTX 750M
    [for details refer to GTX 750M feature details below]
    GTX 670MX
    [for details refer to GTX 670MX feature details below]
    GTX 675MX
    [for details refer to GTX 675MX feature details below]
    GTX 860M (Maxwell based 860M are not supported)
    [for details refer to GTX 860M feature details below]
    GTX 870M
    [for details refer to GTX 870M feature details below]
    GTX 880M
    [for details refer to GTX 880M feature details below]
    Other Supported Nvidia cards::
    GTX TITAN X
    [for details refer to GTX TITAN X feature details below]
    -Supported features:
           * Maximum Boost Frequency adjustment [Auto adjust for P0/P2]
           * Boost table Frequency adjustment [automatically re-arrange boost table based on max boost freq. input]
           * Configure Essential Clocks (Default clock, Boost clock)
           * P-State Terminator [ability to Disable/Enable desired P-state{P0,P2,P5,P8}]
           * Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one
           * Memory clock adjust for P0, P2,P5, P8
           * FAN control:
               + Configure Fan speed range in (%)
               + Configure boot Fan Duty PWM in (%)
               + Configure FAN OS range in (RPM)
               + Configure Temp Curve for Trigger point 1,2,3
               + Configure FAN Curve % for Trigger point 1,2,3
               + Configure FAN Curve RPM for Trigger point 1,2,3 + % calculation per point based on FAN min/max RPM
           * Voltage control:
               + Maximum Voltage adjustment
               + Min/Max Voltage adjustment per P0,P2,P5 P-States
           * Power control:
               + Adjust Default Board Power
               + Adjust Maximum Board Power
               + Configure 100% Power Target
               + Configure Maximum Power Target
               + Configure extended Power tables modifications [4 tables policy, 8 power offsets]
               + Configure PTS Target Junction Temp
               + Configure PTS Max Acoustic Speed
               + Configure PTS Base Power Limit
    Added New add-on Feature related to MSI Notebooks only:
    Current Supported MSI EC Firmwares for Notebooks models,
     by addiction new feature MSI EC-FW Editor are::
      [Note that this feature is not related to vbios modifications!]
        - GT70 0NC
        - GT70 0ND
        - GT70 0NE
        - GT70 Dragon Edition
        - GT70-0NH Workstation
        - GT70 Dragon Edition 2 Extreme
        - GT70 Dragon Edition 2
        - GT70 2OC
        - GT70 2OD
        - GT70-0NG Workstation
        - GT70-2OL Workstation
        - GT70-2OK Workstation
        - GT60 2OD 3K IPS Edition
        - GT60 2OC 3K IPS Edition
        - GT60-2OJ Workstation
        - GT60-2OK Workstation - 3K IPS Edition
        - GT60 2OD
        - GT60 2OC
        - GT60-0NF Workstation
        - GT60-0NG Workstation
        - GT60 0NE
        - GT60 0ND
        - GT60 0NC
        - GE70 2OD
        - GE70 2OE
        - GE70 2OC
        - GE70 0ND
        - GE70 0NC
        - GE60 2OD
        - GE60 2OE
        - GE60 2OC
        - GE60 0ND
        - GE60 0NC
        - GX70 Destroyer
        - GX70 3BE
        - GX60 Destroyer
        - GX60 3BE
        - GX60 Hitman Edition
        - GX60 1AC
        - GS70 STEALTH
        - GE40 2OL
        - GE40 2OC Dragon Eyes
        - GT70 Barabone [1763]
        - GT70 Barabone [1762]
        - GT70 Medion Eraser X7821 [1762]
        - iBuypower Valkyrie CZ-27 [1762]
        - GT60 Barabone [16F3]
        - GE70 2PE Apache Pro
        - GE70 2PC Apache
        - GE60 2PE Apache
        - GE60 2PC Apache
        - GP70 2PE Leopard
        - GP60 2PE Leopard
        - GT70 2PE Dominator Pro
        - GT70 2PC Dominator
        - GT60 2PE Dominator Pro
        - GT60 2PC Dominator
        - GT60 2PE Dominator 3K Edition
        - GT60 2PC Dominator 3K Edition
        - GS70 2PE Stealth Pro
        - GS70 Barabone
        - GS60 2PC Ghost
        - GS60 2PC Ghost 3K Edition
        - GS60 2PE Ghost Pro 3K Edition
        - GS60 2PE Ghost Pro 3K Gold Edition
        - GS70 2PC Stealth
        - GT72 2PC DOMINATOR
        - GT72 2PE DOMINATOR PRO
        - WT70-2OK GT60-2OK WORKSTATION 3K IPS EDITION
        - WT70-2OK
        - WT70-2OL
        - WT60-2OK 3K IPS EDITION
        - WT60-2OJ
        - WS60 2OJ (3K IPS EDITION)
        - WS60 2OJ
        - GS60 2QE GHOST PRO 3K
        - GS60 2QE GHOST PRO
        - GT72 2QD Dominator
        - GT72 2QE Dominator Pro
        - GS70 2QE STEALTH PRO
        - GS70 2QE STEALTH PRO RED EDITION
        - GE60 Barabone [MS-16GC based]
        - GT70 Medion     [MS-1763 based]
        - GS30 2M Shadow
        - GE62 2QE APACHE
        - GE62 2QF APACHE PRO
        - GT80 2QE TITAN SLI
        - GT80 2QD Titan SLI
        - GT72 DOMINATOR DRAGON EDITION
        - GT72 DOMINATOR PRO DRAGON EDITION
        - GT60 2QD DOMINATOR 3K EDITION
        - GT60 2QD DOMINATOR
        - GT70 2QD DOMINATOR
        - GT60 2QE DOMINATOR PRO 4K EDITION
        - GT60 2QD DOMINATOR 4K EDITION
        - GS70 2QE STEALTH PRO SILVER EDITION
        - GS60 2QE GHOST PRO 4K GOLD EDITION
        - GS60 2QE GHOST PRO 4K
        - GS70 2QD STEALTH
        - GS60 2QD GHOST
        - GE60 2PL APACHE
        - GE70 2PL APACHE
        - GE40 2PC DRAGON EYES
        - GE60 2PF APACHE PRO
        - GE60 2PG APACHE
        - S20 SLIDER 2
        - GE72 2QE APACHE
        - S20
        - S30
        - S12T
        - GS70 2QC STEALTH
        - GS70 2QC Barabone
        - GT72_ODM_Barabone
        - GT72_Barabone
        - GE62 2QD APACHE
        - GE72 2QD APACHE
        - PE70 2QE
        - PE70 2QD
        - PE60 2QE
        - PE60 2QD
        - GT60 Medion     [MS-16F3 based]
        - PX60 2QD
        - GS60 2PM
        - GS60 2PL GHOST
    MSI EC-FW Editor Feature details:
      * Allow you to tweak the FAN Curve,
      Temp Curve and Temp Threshold Hysteresis value for both CPU and GPU(discrete) of the Notebook,
     which is controlled by Embedded Controller.
     The MSI EC-FW Editor allow you to modify and customize,
     the firmware image for your Embedded Controller used in your notebook by desired way.
     Allow you to tweak 126 EC-FW values related to the FAN of the notebook.
     The FAN values include different FAN tables,[9 total, with 2 general types: CPU and GPU + Extended tables]
     each table contain 3 main components:
     temp trigger points in degrees(°C), FAN speed in % per each one of the trigger points.
     and temp threshold hysteresis value for each table sets(temp curve & fan curve)
    Update: Add ability to copy entire rows with values of either temp or fan type:
         Usage and more info:  Since there are too many values available for modification,
         depend of models [126 or 168] if all need to be edited it can take too much time.
         Therefor now you can also copy entire row of the values from the same time,
         ie: temp to temp or fan to fan. 1st two tables defines CPU & GPU fan profiles,
         which you can use as sample to spread quickly over all other tables.
         you can do this by enter 2 letters one after another,
         where the 1st one will be the source and the second one will be the target row.
         Source rows can be only any from the 1st 4, ie: a,b,c,d  while the target rows can be any row.
         Normally they has repeatable pattern, so you can config 1st 4 by your taste,
         then copy all of them over all others very quickly. And if needs any small change, fine tune,
         you can always edit any of the 126 or 168 values individually.
         UPDATE: Add new feature:
          - Allow Temp Threshold Hysteresis modification CPU/GPU, available for all supported MSI Notebooks
     Quick EC-FW image Modification Guide:
     1. Load EC-FW image that you want to customize.
        -Where i can get it?
        -Go to msi web page for your notebook model, then choose download and navigate to firmwares.
    Check your current EC version 1st, go to BIOS Setup,[press "Del" key during bios post/logo screen]
    then you can see EC VER in System Info.
    Download and use the same EC type, ie: if your current is: xxxxxx.405 , use the same xxxxxx.4xx type
    or if you current one is .5xx, use .5xx firmware
     2. Modify the FAN table(s) values to desired one with MSI EC-FW Editor, then save it.
     3. Proceed with EC Flashing:
        * Before proceed with EC flash make sure that both battery and AC charger are attached to the notebook.
        The EC image file archive file can come with DOS or Windows Flasher, or both.
        DOS instructions, example: [archive example: 1762EMS2.414.zip ]
        with extracted files from archive to some folder: 1762EMS2.414, CheckSum.txt, ECALL.BAT, ENEF_030.EXE
        after modify the EC firmware[from the example above its: 1762EMS2.414] by MSI EC-FW Editor
        with desired FAN values, after modification of the EC-FW is done:
        delete CheckSum.txt located in the same folder, create bootable USB key,
        once done copy all files to the USB key[which is already bootable], ie copy to the USB key:
        1762EMS2.414,ECALL.BAT, ENEF_030.EXE
        reboot notebook and press 'F11', then choose your USB key from the list and hit ENTER.
        Note: For those Notebook who use Windows8 BIOS,
        you need to set in BIOS Setup boot mode to Legacy and to Disable secure boot before try to boot from the USB key.
        When you see A:\ or C:\, type:
        ECALL.BAT [ENTER]
        wait to finish, then turn off your notebook [press and hold the power button]
        Then do EC Reset: https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
        And you are done.
        Windows instructions, example: [archive example: w8_1762EMS2.505.zip ]
        after modify the EC firmware[from the example above its: 1762EMS2.505 ] by MSI EC-FW Editor
        with desired FAN values, after modification of the EC-FW is done:
        delete CheckSum.txt located in the same folder, then run autoflash.exe
        if autoflash.exe doesn't exist, then execute winflash.exe
        When flashing is done, do EC Reset: https://forum-en.msi.com/faq/article/how-to-reset-the-ec-embedded-controller
        And you are done.
       NOTES: The guide above is when you use original EC-FW name.
       If you gonna change the original name before flashing [not recommended]
       you have to follow this rules and do an extra steps:
          - do not rename 1st 8 characters from the file name,
          you can rename only the file name extension of the EC-FW,
         ie: .xxx because there is build in protection in the flasher who check the names on flash attempt.
          - DOS Flashing: You also have to edit ECALL.BAT to replace the EC-FW name with your renamed one.
          - Win Flashing: You also have to edit config.ini to replace the EC-FW name with your renamed one.
    Note: Kepler mobiles are not supported!
    Eventually they can be added later in time, but for now they are not supported.
    For recent info and updated info check *** below.
    Partially supported models: [in build process]
    GTX 780M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support master voltage adjust
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support additional performance tweaks and optimizations
    Support GPU Boost logic Enable/Disable
    Support Software Power Control [Off/On]
    Support default Power Target adjust
    Support max Power Target adjust
    Support Power Limit % adjust[by modify default & max power targets] and calc
    Support P-State Terminator [ability to Disable/Enable desired P-state]
    GTX 770M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support Software Power Control [Off/On]
    Support default Power Target adjust
    Support max Power Target adjust
    Support Power Limit % adjust[by modify default & max power targets] and calc
    Support Undervolting
    GTX 765M  feature details:
    Support voltage adjust for  P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    GTX 760M  feature details:
    Support voltage adjust for P0, P5, P8
    Support master voltage adjust
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    750M  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    GTX 670MX  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    GTX 675MX  feature details:
    Support voltage adjust for P0, P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support Software Voltage control [On/Off]
    Support Software Voltage definition and adjustment
    GTX 860M , GTX 870and GTX 880M feature details:
    Support voltage adjust for  P0, P1,P5, P8
    Support higher clock's voltage adjust
    Support memory clock adjust for P0, P1, P5, P8
    Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
    Support for power control modifications
    K3000M feature details:
    Support voltage adjust for P0,P5, P8
    Support memory clock adjust for P0, P5, P8
    Support Maximum Boost Frequency adjust
    Support Boost table Frequency adjust
    Support Essential Domain 1 Frequency adjust
    Support Essential Domain 2 Frequency adjust
    Support Essential Domain 3 Frequency adjust
    Support Software GPU core OC Limit removal
    Support GPU Boost logic Enable/Disable
    Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P5,P8)]
    EDIT: Voltage adjust and power control has been also added:
    * Add voltage adjust for supported Kepler GPUs [available at voltage tune]
    * Add power control for supported Kepler GPUs [available at power control]
        -Board Power (default/max)
        -Power Target (100%/max)
        + calc. and shows power Limit % in real time before apply desired changes.
    EDIT2:  Add Memory frequency adjustment for Kepler supported cards for states [P0,P2,P5,P8]
    EDIT3: Add Core Management support for Kepler's GPU:
       - Configure P-State Maximum Frequency [Sub domains auto applied based on desired frequency]
       - Configure Maximum Voltage Frequency [Sub domains auto calculated with 26MHz steps and applied based on desired frequency]
       - Configure Essential P-State (Default clock, Boost clock, domain 3[when Turbo Boost is ON])
          [chooses auto determinate based on P-State and Voltage Frequency, domain 4 auto adjust depend of Boost state]
       - Configure 3D Boost and Turbo Boost [N/A For GTX TITAN]
    EDIT4: For Full supported Mobile Keplers [780M only for now]
    - Add core management support:
                 + Config Maximum Boost Frequency
                 + Config Maximum Boost table Frequency /* Automatic calculate and re-arrange boost table based on single max clock input */
                 + Config Essential Domains (1,2,3) /* Default, Boost & Max clocks */
                 + Remove Software GPU core OC Limit /* Sets to optimal level */
                 + Apply additional performance tweaks  /* Addiction optimizations which could improve VGA performance]
    EDIT5: [GTX780 only]
    - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    EDIT6: [780M only] , Update voltage control with new add-ons:
    - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    - Update voltage control for more precision control:
            > Allow undervolting
            > Allow master voltage adjust
            > Allow software voltage control
            > Allow software voltage control definition
    EDIT7: [780M and 770M only]:
           > Allow Power control
               [GTX780 only]:
           > Allow Max Voltage adjustment [under voltage thread]
    EDIT8: [GTX780 only]
      Add eXpert FAN control in addiction to standard Fan modifications, newest one add-on:
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    EDIT9:[GTX770 and GTX780 only]
      Add eXpert FAN control in addiction to standard Fan modifications, newest one add-on:
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    * Update 760M:
          - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
          - Update voltage control: Add master voltage adjustment
    * Update 765M:
         - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    *  Update 770M:
      - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    * Update GTX 770: Add ability to Enable/Disable boost logic
    EDIT10: Add undervolt ability for 770M
    EDIT11:
      Update GTX 780: - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load, proportional, bang bang, total]
      Update GTX 770:
        - Add support for Max Voltage adjustment
        - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load, proportional, bang bang, total]
    EDIT12: Add support for GTX 780 Ti [supported with full set of currently available features that's also available for GTX 780 & GTX 770]
    EDIT13:
    * Improve FAN control for GTX 780 Ti, GTX 780, GTX 770:
       - now also adjust duplicate min/max FAN % entry for listed models,
     [its done automatically when standard min/max FAN % is adjusted]
    * Update GTX 780 Ti: Improve max boost mode operation,
     with auto sync and update for P0,P2,P5 states.
      [GTX 780 Ti has different boost method that any others cards before]
    * Update GTX TITAN: Add external Power profiles support
    * Add new feature P-State Terminator for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allows to Disable/Re-Enable desired P-State(s)
    EDIT14:
    * Update Fan Curve control for GTX 780 Ti, GTX 780, GTX 770:
       - Add support for FAN duty % modification per trigger points
    * Add new feature PTS (perf. test specs) modification for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allow PTS Max Acoustic Speed modification
       - Allow PTS Base Power Limit modification
       - Allow PTS Target Junction Temp modification
    EDIT15:
    * Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - FAN Acceleration Model modification for more smooth FAN control, details:
               show fan acc model OS value hex: yes
               detect and show synchronization status with boot acceleration model: yes
               manual/direct modification: no
               automatic modification: yes
               automatic synchronization of fan acc model between OS & Boot mode: yes
          More info: FAN Acceleration Model will be automatically generated,updated and synchronized with boot model,
          when we adjust general min/max FAN % values.
          Other factors that can effect its value while processed for adjustment,
          is the value of the FAN % for middle point of the fan curve.
    EDIT16:  Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one.
     [the new feature is available under core management for those units]
    EDIT17:  Add new feature for MSI Notebooks from gaming series,
     called "MSI EC-FW Editor"
    EDIT18: Update MSI EC-FW Editor [details in versions change log]
    EDIT19: Add support for 670MX & 675MX
     * Update EC Tuner:
             - Add support for GT70 Barabone [1763]
             - Add support for GT60 Barabone [16F3]
             - Add support for msi's special T16 & T17 EC's for 1762 & 16F3
     * Update 780M: Add support for P-State Terminator [ability to Disable/Enable desired P-state]
    Support advanced FAN adjust features for Kepler:
    - Configure Fan speed range in (%)
     - Configure Fan speed range in (RPM)
     - Configure boot Fan Duty PWM in (%)
    Supported OS:
    XP, Vista, Windows 7 [all kind of sub versions]
    Both 32-bit and 64-bit OS versions.
    >>>Change Log information is in post #2 <<<
    Svet's VBIOS Tuner is available on donation:
    >>>
    <<<
    Once donation is done, the Tool will be e-mailed to the co-respond person,
    who also will gain donation free further versions{updates} of the Tuner.
    [etc. this donation is need only once per person]
    [if someone wish to donate further, it can be done directly from Tool's main interface where can be set a custom
    donation amount]
    Further released Tuner's versions will be available via tool's self update feature:
    Best Regards,
    Svet
    NOTE:  All modifications which you do are entirely at your own risk!

    Versions Change logs:
    Version has been updated [ 0.12c ==> 0.18e ]:
    Changes:
    - Add voltage[load & max voltage] read/write support for latest and special MSI's 580 Lightning
    VBIOSes above version 130
    Version has been updated [ 0.18e ==> 0.33f ]:
    Changes:
    - Updated VBIOS-Z Report Engine
    - Fixed issue: Tuner cannot work in Vista/Windows7 if UAC is Enabled, caused an error "A referral was returned from
    the server."
    Version has been updated [ 0.33f ==> 0.56p ]:
    Changes:
    - Add support for GTX 570M
    Version has been updated [ 0.56p ==> 0.75s ]:
    Changes:
    - Add support for GTX 570M [secondary different general type]
    - Add support for GTX 560M [2 different general types]
    Version has been updated [ 0.75s ==> 0.83x ]:
    Changes:
    - Add voltage adjustment support for 560M
    - Add alternative GPU clock booster for Mobility Series
    Version has been updated [ 0.83x ==> 0.92a ]:
    Changes:
      - Allow P1 state clocks modifications for mobility Series for cases:
    560M[Type1, Type2], 570M[Type1, Type2] in both Synchronized[GPC,LTC,XBAR] & Asynchronized [GPC only] GPU Clocks
    adjust.
    560M[Type1, Type2], 570M[Type1, Type2] Memory Clock adjust.
    560M[Type1, Type2], 570M[Type1, Type2] Voltage adjust auto apply to both P1/P0 states.
      - Extend voltage limit for 570M[Type1, Type2] to 920mV
    Version has been updated [ 0.92a ==> 1.07f ]:
    Changes:
    - Updated VBIOS-Z Engine
    - Updated appearance [cosmetic corrections]
    - Allow P8 core clocks modifications for 570M [Type1, Type2]
    - Limit LTC and XBAR clocks domains in P8 state when is used Synchronized mode to 598MHz with regard less of GPC
    clock.
    - P1 and P0 voltages for 570M [Type1, Type2] now can be controlled separately
    - Allow P8 voltage modification for 570M [Type1, Type2]
    - Allow P8 memory clock adjustment for 570M [Type1, Type2]
    - Improved handle method for 570M [Type1, Type2] & 560M [Type1, Type2]
    - Allow P1 and P0 separate voltages control for 560M [Type1, Type2]
    - Allow P12 and P8 voltages adjustment for 560M [Type1, Type2]
    - Implement Self Update Feature [Tuner now can self update when a newest further version is released]
    Version has been updated [ 1.07f ==> 1.09h ]:
    Changes:
    - Add support for new kind of VBIOS image for 570M  [70.24.32.00.04(GT780DX/GTX570M/3GB DDR5)]
    Version has been updated [ 1.09h ==> 1.11j ]:
    Changes:
    - Fixed issue introduced in version 1.09h[from yesterday] cannot modify voltage for [70.24.32.00.04
    (GT780DX/GTX570M/3GB DDR5)]
    Version has been updated [ 1.11j ==> 1.12k ]:
    Changes:
    - Support experimental[non standard] vBIOS 570M image[a variable of type1]
    Version has been updated [ 1.12k ==> 1.13p ]:
    Changes:
    - Add support for GTX 460M [2 different general types]
    Version has been updated [ 1.13p ==> 1.14s ]:
    Changes:
    - Add support for GTX 580M
    Version has been updated [ 1.14s ==> 1.16x ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M: Add support for secondary and different general vBIOS type.
    - Add support for GT 555M, 2 different general vBIOS types.
    Version has been updated [ 1.16x ==> 1.17a ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 560M:
       * Allow P8 frequency modifications [voltage is already available]
       * Add support for another and different general vBIOS type of 560M
    - Allow P8 and P12 frequency and voltage modifications for 560GTX-Ti
    - Add support for GT 635M
    Version has been updated [ 1.17a ==> 1.19d ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Reduce low freq. limit from 100MHz to 20Mhz  [Usefull for P12 freq. modifications]
    - Add support for 560GTX-Ti 448
    [recently released card, such as: [example for msi's representative cards: N560GTX-448 Twin Frozr III Power
    Edition, N560GTX-448 Twin Frozr III Power Edition/OC]]
    Version has been updated [ 1.19d ==> 1.20f]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Add Support for GTX 470M + auto correct GPU-Z's dump issue if and when needs.
    [auto remove unnecessary padding when such exist in vbios image when saved with GPU-Z]
    - Update GTX 460M: Add support for 3th different general vBIOS type.
    Version has been updated [ 1.20f ==> 1.25g ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Add Support for GTX 670M
    - Add Support for GTX 675M
    Version has been updated [ 1.25g ==> 1.26k ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 560M[Type1,Type2]: Allow P12 clock modifications
    - Add Support for GTX 560SE
    Version has been updated [ 1.26k ==> 1.27n ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M[Type1,Type2]:
      * Allow P12 clock and voltage modifications
      * Allow manual LTC and XBAR clocks input[linked together, one input will update them both] for P8 and P12 states
    For P0 and P1 states, they works as for all others, i.e, depend of choose:
    In Synchronized mode: LTC and XBAR clocks will be automatically calculated and updated based on their ratio,
    [keeping the same ratio] and based on user GPC clock input.
    In Asynchronized mode: Only GPC will be modified depend of user input. LTC and XBAR clocks will remain as is.
    Version has been updated [ 1.27n ==> 1.28s ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 580M: Add support for newest release different vBIOS type 3
    - Update 560GTX-SE: Add support for vBIOS type 2
    - Other tool optimization
    Version has been updated [ 1.28s ==> 1.29t ]:
    Changes as simple as possible without too much details, just essential: [like in prevision recent change logs]
    - Update GTX 570M related to all vbios types[1,2,3]:
      * Allow P12 clock and voltage modification
      * Improve P8 and P12 core clock modification, allow manual synchronized[one value will update both of them] LTC
    and XBAR clock adjustment [along with GPC clock with separate clock selection] as ratio between GPC to LTC & XBAR
    is too high to follow.
    Version has been updated [ 1.29t ==> 1.30u ]:
    - Update 560GTX-Ti: Add support for newest vbios type.
    Version has been updated[user request] [ 1.30u ==> 1.31x]:
    - Update 560GTX-Ti 448: Add support for newest vbios type.
    Version has been updated  [ 1.31x ==> 2.33a ]:
    - Update self update module
     - Add support for various Kepler VGA's, include support for Hybrid UEFI vBIOSes.
    Supported Kepler units:
        * GTX 680 [4 different general types]
        * GTX 670 [2 different general types]
        * GTX 660 Ti
        * GTX 660 [2 different general types]
    Note: Only FAN adjust feature[See *** below for details] are supported for Kepler's vBIOS for now.
    More features can be added with further versions.
    - Add advanced Kepler's FAN adjust features:
       1 Configure Fan speed range in (%)
       2 Configure Fan speed range in (RPM)
       3 Configure boot Fan Duty PWM in (%)
    Version has been updated  [ 2.33a ==> 2.35d ]:
    * Improve tool performance
    * Update boot Fan Duty PWM to add support for 660Ti new type GB variable.
    * Adjust low FAN limit to 5%
    * Add voltage adjust for supported Kepler GPUs [available at voltage tune]
    * Add power control for supported Kepler GPUs [available at power control]
        -Board Power (default/max)
        -Power Target (100%/max)
        + calc. and shows power Limit % in real time before apply desired changes.
    Version has been updated  [ 2.35d ==> 2.36f ]:
    * Add Memory frequency adjustment for Kepler supported cards for states [P0,P2,P5,P8]
    Version has been updated  [ 2.36f ==> 2.37g ]:
    * Add support for GTX 660 OEM
    * Change minimum boot Fan Duty PWM to 10% [when operating outside Windows]
    Version has been updated  [ 2.37g ==> 2.40k ]:
    * Add support for new vbios type variable of GTX 680
    * Add support for Quadro 4000M
    * Add Core Management support for Kepler's GPU:
       - Configure P-State Maximum Frequency [Sub domains auto applied based on desired frequency]
       - Configure Maximum Voltage Frequency [Sub domains auto calculated with 26MHz steps and applied based on desired
    frequency]
       - Configure Essential P-State (Default clock, Boost clock, domain 3[when Turbo Boost is ON])
          [chooses auto determinate based on P-State and Voltage Frequency, domain 4 auto adjust depend of Boost state]
       - Configure 3D Boost and Turbo Boost
    Version has been updated  [ 2.40k ==> 2.41s ]:
    * Fixed issue: Unable to read clocks and voltage correctly for Zotac 680 GTX
    Version has been updated  [ 2.41s ==> 2.42t ]:
    * Updated self update module
    * Add support for GTX 650 Ti
    * Add support for GTX TITAN
    * Allow minimum FAN 0%
    Version has been updated  [ 2.42t ==> 2.43w ]:
    * Fixed update issue, at some machines sometimes cannot find the new version. [cache issue]
    Version has been updated  [ 2.43w ==> 2.44x ]:
    * Update GTX 670M: Add support for 2 new vbios types, used in system BIOS [not in dedicated card
    bios]
    Version has been updated  [ 2.44x ==> 2.45a ]:
    * Update GTX 670M: Add support for 2 more new vbios types[legacy], used in system BIOS [not in
    dedicated card bios]
    * Update GTX 650 Ti:
         - Add support for new vbios type
         - Improve core boosting
         - Improve compatibility with future vbios types
    * Update GTX 670:  Add support for new vbios type with GOP Support.
    Version has been updated  [ 2.45a ==> 2.46b ]:
    * Update GTX 660 Ti:  Add support for new vbios type with GOP Support.
    * Update GTX 660:  Add support for new vbios type.
    * Update GTX 680:  Add support for new vbios type.
    * Modify descriptions for some items for better clarify.
    * Update GTX TITAN:
         - Allow P-State voltage modifications.
         - Add addiction experimental test voltages [1225mV,1237mV,1250mV] for those who want to try and test it.
         - Adjust boot FAN duty range.
    * Update certain modules to cause less false alerts for some too sensitive AVs
    * Update Kepler Core Management:
       - Applied new boosting rules
       - Update boosting tables
       - Extent region range of allowed selection
       - Improve performance
    * Add initial support for GTX 780M [allow memory clock adjust for all P-States]
    Version has been updated  [ 2.46b ==> 2.47c ]:
    * Update GTX 680:
       - Add support for new vbios type with GOP support
       - Add support for new vbios type
       - Improve compatibility with future vbioses
    * Add support for GTX 460
    * Add support for GTX 780
    * Add support for GTX 770 [2 different general types]
    * Update GTX 780M: Add support for new general type.
    Version has been updated  [ 2.47c ==> 2.48f ]:
     Partially supported: [in build process]
    * Update 780M: Add voltage control ability
     * Add support[memory & voltage control for now] for 770M, 760M, 765M, 675MX
     * Update 780M: Add support for new vbios type
      Fully supported:
    * Add support for GTX480
     * Add support for GTX690
     * Update GTX770: Add support for new images type with GOP support
     * Update GTX780: Add support for new vbios type
    Version has been updated  [ 2.48f ==> 2.49h ]:
     Partially supported: [in build process]
      *Update 675MX: Add support for new vbios type
      Fully supported:
        * Update GTX780: Add support for 2 new vbios types
        * Update 780M:
            - Add support for new vbios type
            - Add core management support:
                 + Config Maximum Boost Frequency
                 + Config Maximum Boost table Frequency /* Automatic calculate and re-arrange boost table based on
    single max clock input */
                 + Config Essential Domains (1,2,3) /* Default, Boost & Max clocks */
                 + Remove Software GPU core OC Limit /* Sets to optimal level */
                 + Apply additional performance tweaks  /* Addiction optimizations which could improve VGA
    performance]
    FYI: Some test results. Was able to test for some time latest tuner version on MSI GT70 Dragon[i7-4930MX with
    780M],
    after many tests with 780M boosted by vbios tuner 2.49h, higher reached scores in 3dmark11
    was able to archive P8557 [but forgot to store/save the result..],
    got saved some of the previsions test result  P8499 : http://www.3dmark.com/3dm11/6781702
    Which smoke away, the "Eurocom X5 with GTX 780M and i7-4930MX Dominates Benchmarks":
    http://www.techpowerup.com/185935/eurocom-x5-with-gtx-780m-and-i7-4930x-dominates-benchmarks.html
    with their P8001 scores in 3Dmark11 with the same hardware used.
    Version has been updated  [ 2.49h ==> 2.50k ]:
    Changes:
    * Extent memory clock range. [read/write operations and allow higher selection]
    * Extent max. boost clock range for desktop Keplers
    * Update GTX780:
        - Add support for 5 new different vbios types
        - Add ability to turn off/on GPU Boost logic  //* available under core management *//
    * Update 780M
        - Add ability to turn off/on GPU Boost logic //* available  under core management *//
    Version has been updated  [ 2.50k ==> 2.51r ]:
    Changes:
     Partially supported:
      * Update 675MX: Add support for 2 new vbios types
      * Update   770M: Add support for 1 new vbios type
     * Fixed recently introduced issues:
         - Core management can't proceed some Fermi vbios images
         - Cosmetic issue, black bar appears at specified conditions under core management
         - Memory adjust selection over 4000 resets to 2300+
    * Update   780M:
         - Update voltage control for more precision control, new add-on:
            > Allow undervolting
            > Allow master voltage adjust
            > Allow software voltage control
            > Allow software voltage control definition
      * Modify installer to add addiction desktop shortcut to selfupdate module
      * Add "Open","Save" and "Img Loc"[show current working image] as addiction functions for vbios images for more
    comfortable controls
    Version has been updated  [ 2.51r ==> 2.52s ]:
    Changes:
    * Update  780M: Add support for new vbios type
    Version has been updated  [ 2.52s ==> 2.53t ]:
    Changes:
    * Update  780M:
       - Add support for new vbios type
       - Allow Power control
    * Update  770M: [partially supported]
       - Add support for new vbios type
       - Allow Power control
    * Update GTX780:
       - Add support for new vbios type
       - Allow Max Voltage adjustment [under voltage thread]
    Version has been updated  [ 2.53t ==> 2.54x ]:
    Changes:
    * Update FAN Control for Kepler GPUs:
       - Show all detected results and update them in real time based on our modifications for more comfortable
    control.
    * Add eXpert FAN Control for GTX 780:
       To Standard[current supported] modifications:
         - FAN Min [%]
         - FAN Max [%]
         - FAN Min [RPM]
         - FAN Max [RPM]
         - FAN Boot Duty [%]  --> [This also will modify Dust Removal Technology speed for the cards who
    support such.]
       Now plus new one: [For GTX 780 only, for now]
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    Version has been updated  [ 2.54x ==> 2.55y ]:
    Changes:
    * Add support for new vBIOS types:
        - 780M: +1
        - 770M: +1
        - 765M: +1
        - 760M: +1
        - GTX 770: +3
    * Add eXpert FAN Control for GTX 770:
       To Standard[current supported] modifications:
        - FAN Min [%]
         - FAN Max [%]
         - FAN Min [RPM]
         - FAN Max [RPM]
         - FAN Boot Duty [%]  --> [This also will modify Dust Removal Technology speed for the cards who
    support such.]
       Now plus new one: [For GTX 770 and GTX 780 only, for now]
       > FAN Curve Control:
         - Trigger control point 1:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
         - Trigger control point 2:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==>  RPM Tolerance %
         - Trigger control point 3:
            ==> target C [Temp in Celsius]
            ==> target FAN RPM + % calculation
            ==> RPM Tolerance %
       > FAN OS Min [RPM]
       > FAN OS Max [RPM]
    * Update appearance.
    * Fixed cosmetic issue, when enter to adjust FAN OS RPM, min FAN OS RPM is not shown.
    * Update GTX 770: Add ability to Enable/Disable boost logic
    * Update 780M: Fixed compatibility issue which cause voltage management to unable to proceed an vbios
    * Update 760M:
          - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
          - Update voltage control: Add master voltage adjustment
    * Update 765M:
         - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    *  Update 770M:
      - Add core management support:
             :Maximum Boost Frequency
             :Maximum Boost table Frequency
             :Essential Domains 1,2,3
             :GPU core OC software Limit removal
             :GPU Boost logic Enable/Disable
    Version has been updated  [ 2.55y ==> 2.56z ]:
    Changes:
    * Update 760M: Add support for new vbios type
     * Fixed cosmetic issue, core management GK ID incorrect for some of recently added cards
     * Improve Updater to handle some custom cases, auto detect if there is customized cache location to be able to
    clear old cache data before check for update.
    Version has been updated  [ 2.56z ==> 2.57a ]:
    Changes:
     * Update 770M: Add support for new vbios type. [to fix issue wrong core clocks and boost logic N/A
    with specified new vbios image]
     * Add test vbios support for specified 670MX vbios image, for testing purpose only.[memory and voltage support]
        [Else 670MX in general remain unsupported]
     * Update 765M: Add support for new vbios type.
     * Modify recently added addiction save module to avoid false detection issue with Norton AV
     * Applied new hotkey rules inside threads to be equal for all of them as followed:
           - "A" ==> Abort and going back to main menu and discard any changes done in current thread. 
           - "S" ==> Save changes and going back to main menu.
    Version has been updated  [ 2.57a ==> 2.58c ]:
    Changes:
    * Fixed cosmetic issue at some places was still shows 'Q' to abort instead 'A'
     * Fixed recently introduced issue 760M vbios-z and core management error
     * Fixed recently introduced issue GTX TITAN vbios-z error
     * Update test version 670MX:
          - re-calibrate voltage control based on latest test results
          - add support for 2 new vbios types
     * Update GTX TITAN: Add ability to Enable/Disable Boost Logic
     * Modify some .asm sources to avoid false positive suspicion detection for Avast issue
    Version has been updated  [ 2.58c ==> 2.59d ]:
    Changes:
    * Update test version 670MX: Add support for new vbios type
     * Update version 780M: Add support for new vbios type
     * Update GTX780: Add support for new vbios type
     * Update GTX 660 Ti: Add support for new vbios type
    Version has been updated  [ 2.59d ==> 2.60e ]:
    Changes:
    * Update version 770M:
         - Add support for new vbios type
         - Add undervolt ability
    Version has been updated  [ 2.60e ==> 2.61f ]:
    Changes:
     * Update GTX 780:
         - Add support for new vbios type
         - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core
    load, proportional, bang bang, total]
     * Update GTX 770:
        - Add support for Max Voltage adjustment
        - Add support for extended Power tables modifications [6 tables policy, 12 power offsets, type vary: core load,
    proportional, bang bang, total]
    Version has been updated  [ 2.61f ==> 2.62g ]:
    Changes:
    * Update GTX 780: Add support for 2 new vbios types
    * Minor update auto updater
    * Fixed recently introduced bug: 780M type 1 vbios image only,  vbios-z and power control error
    * Fixed issue Power control cannot select 1000W
    * Fixed issue Power control class 1a and 1b cannot apply the same values
    * Decrease sound volume by 20%
    * Add support for GTX 780 Ti [supported with full set of currently available features that's also available for GTX
    780 & GTX 770]
    Version has been updated  [ 2.62g ==> 2.63h ]:
    Changes:
    * Update GTX 765M: Add support for new vbios type
    * Improve FAN control for GTX 780 Ti, GTX 780, GTX 770:
       - now also adjust duplicate min/max FAN % entry for listed models,
     [its done automatically when standard min/max FAN % is adjusted]
    * Update GTX 780 Ti: Improve max boost mode operation,
     with auto sync and update for P0,P2,P5 states.
      [GTX 780 Ti has different boost method that any others cards before]
    * Update GTX TITAN: Add external Power profiles support
    * Add new feature P-State Terminator for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allows to Disable/Re-Enable desired P-State(s)
    Version has been updated  [ 2.63h ==> 2.64j ]:
    Changes:
    * Update Fan Curve control for GTX 780 Ti, GTX 780, GTX 7==> FAN duty % modification per trigger
    points
    * Add new feature PTS (perf. test specs) modification for GTX 780 Ti, GTX TITAN,GTX 780, GTX 770: 
       - Allow PTS Max Acoustic Speed modification
       - Allow PTS Base Power Limit modification
       - Allow PTS Target Junction Temp modification
    Version has been updated  [ 2.64j ==> 2.65k ]:
    Changes:
    * Update GTX 780: Add support for new vbios type +1
    * Update GTX 765M: Add support for new vbios type +1
    * Fixed an cosmetic issue, typo error.
    * Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
          - FAN Acceleration Model modification for more smooth FAN control, details:
               show fan acc model OS value hex: yes
               detect and show synchronization status with boot acceleration model: yes
               manual/direct modification: no
               automatic modification: yes
               automatic synchronization of fan acc model between OS & Boot mode: ye==>cceleration Model will be
    automatically generated,updated and synchronized with boot model,
          when we adjust general min/max FAN % values.
          Other factors that can effect its value while processed for adjustment,
          is the value of the FAN % for middle point of the fan curve.
    Version has been updated  [ 2.65k ==> 2.66j ]:
    Changes:
    *  Update GTX 780 Ti and GTX 780: Add support for new vbios type +2 and +1
     *  Add new feature for: GTX 780, GTX 780 Ti, GTX 770, GTX TITAN:
         - Vendor ID changer: Allow you to choose between 32 different vendors and change vendor ID to desired one.   
    [the new feature is available under core management for those units] 
    minor update:
    Version has been updated  [ 2.66j ==> 2.67k ]:
    Changes:
    *  Update GTX 660 Ti: Add support for new vbios type +1
    *  Update GTX 770: Add support for new vbios type +1
    minor and urgent update:
    Version has been updated  [ 2.67k ==> 2.68l ]:
    Changes:
    *  Update GTX 770: Add support for new vbios type +2
    *  Fixed issue: Compatibility issue with latest OS updates, [win7+] caused voltage thread to self terminate.
    *  Minor work speed improvement for all threads
    minor update:
    Version has been updated  [ 2.68l ==> 2.69m ]:
    Changes:
    *  Update 460M: Add support for new vbios, type 4
    *  Update GTX 780 Ti: Add support for new vbios type +1
    Version has been updated  [ 2.69m ==> 2.70n ]:
    Changes:
     * Update GTX 480: Add support for new vbios type +1
     * Update GTX 760M: Add support for new vbios type +1
     * Update GTX 780 Ti: Add support for new vbios type +1
     * Update GTX 780: Add support for new vbios type +1
     * Add new feature for MSI Notebooks from gaming series,
     called "MSI EC-FW Editor".
     Supported MSI Notebooks models are the followed:
        - GT70 0NC
        - GT70 0ND
        - GT70 0NE
        - GT70 Dragon Edition
        - GT70-0NH Workstation
        - GT70 Dragon Edition 2 Extreme
        - GT70 Dragon Edition 2
        - GT70 2OC
        - GT70 2OD
        - GT70-0NG Workstation
        - GT70-2OL Workstation
        - GT70-2OK Workstation
        - GT60 2OD 3K IPS Edition
        - GT60 2OC 3K IPS Edition
        - GT60-2OJ Workstation
        - GT60-2OK Workstation - 3K IPS Edition
        - GT60 2OD
        - GT60 2OC
        - GT60-0NF Workstation
        - GT60-0NG Workstation
        - GT60 0NE
        - GT60 0ND
        - GT60 0NC
        - GE70 2OD
        - GE70 2OE
        - GE70 2OC
        - GE70 0ND
        - GE70 0NC
        - GE60 2OD
        - GE60 2OE
        - GE60 2OC
        - GE60 0ND
        - GE60 0NC
    Version has been updated  [ 2.70n ==> 2.71o ]:
    Changes:
    * Update MSI EC-FW Editor:
       - Add addiction support for followed MSI notebooks:
           } GX70 Destroyer
           } GX70 3BE
           } GX60 Destroyer
           } GX60 3BE
           } GX60 Hitman Edition
           } GX60 1AC
           } GS70 STEALTH
           } GE40 2OL
           } GE40 2OC Dragon Eyes
       - Update support for 16F4 and 1763 based MSI Notebooks:
           - added 3 more addiction FAN tables for those units.
       - Add hot key "E" - quick start MSI EC-FW Editor
       - Add ability to copy entire rows with values of either temp or fan type:
           Usage and more info:  Since there are too many values available for modification,
         depend of models [126 or 168] if all need to be edited it can take too much time.
         Therefor now you can also copy entire row of the values from the same time,
         ie: temp to temp or fan to fan. 1st two tables defines CPU & GPU fan profiles,
         which you can use as sample to spread quickly over all other tables.
         you can do this by enter 2 letters one after another,
         where the 1st one will be the source and the second one will be the target row.
         Source rows can be only any from the 1st 4, ie: a,b,c,d  while the target rows can be any row.
         Normally they has repeatable pattern, so you can config 1st 4 by your taste,
         then copy all of them over all others very quickly. And if needs any small change, fine tune,
         you can always edit any of the 126 or 168 values individually.
    Version has been updated  [ 2.71o ==> 2.72p ]:
    Changes:
         * Add support for 670MX
         * Add support for 675MX
            Features supported for 670MX and 675MX:
             Support voltage adjust for P0, P5, P8
             Support memory clock adjust for P0, P5, P8
             Support Maximum Boost Frequency adjust
             Support Boost table Frequency adjust
             Support Essential Domain 1 Frequency adjust
             Support Essential Domain 2 Frequency adjust
             Support Essential Domain 3 Frequency adjust
             Support Software GPU core OC Limit removal
         * Update EC Tuner:
             - Add support for GT70 Barabone [1763]
             - Add support for GT60 Barabone [16F3]
             - Add support for msi's special T16 & T17 EC's for 1762 & 16F3
         * Fix cosmetic issue, when saving image on exit it blink for second
         * Update GTX 780M:
           - Add support for P-State Terminator [ability to Disable/Enable desired P-state]
    Version has been updated  [ 2.72p ==> 2.73r ]:
    Changes:
    * Update GTX 780 Ti: Add support for new vbios type
    Version has been updated  [ 2.73r ==> 2.74s ]:
    Changes:
    * Add support for 750M
            Features supported:
             Support voltage adjust for P0, P5, P8
             Support memory clock adjust for P0, P5, P8
             Support Maximum Boost Frequency adjust
             Support Boost table Frequency adjust
             Support Essential Domain 1 Frequency adjust
             Support Essential Domain 2 Frequency adjust
             Support Essential Domain 3 Frequency adjust
             Support Software GPU core OC Limit removal
             Support GPU Boost logic Enable/Disable
    Version has been updated  [ 2.74s ==> 2.75t ]:
    Changes:
      * Update: GTX 670MX:
         - Add support for new vbios type 
         - Add support Software Voltage control [On/Off]
         - Add support Software Voltage definition and adjustment
      * Update: GTX 770:
         - Add support for new vbios type
      * Update MSI EC-FW Editor:
         - Add support for new units:
            +GE70 2PE Apache Pro
            +GE70 2PC Apache
            +GE60 2PE Apache
            +GE60 2PC Apache
            +GP70 2PE Leopard
            +GP60 2PE Leopard
            +GT70 2PE Dominator Pro
            +GT70 2PC Dominator
            +GT60 2PE Dominator Pro
            +GT60 2PC Dominator
            +GT60 2PE Dominator 3K Edition
            +GT60 2PC Dominator 3K Edition
            +GS70 2PE Stealth Pro
    Version has been updated  [ 2.75t ==> 2.76u ]:
    Changes:
      * Update: GTX 675MX:
         - Add support Software Voltage control [On/Off]
         - Add support Software Voltage definition and adjustment
      * Update: GTX 765M: Add support for new vbios type
      * Update MSI EC-FW Editor:
         - Fix some garbage characters for Chinese language OS [cosmetic issue]
         - Add support for new units:
             +GS70 Barabone
             +GS60 2PC Ghost
             +GS60 2PC Ghost 3K Edition
             +GS70 2PC Stealth
    Version has been updated  [ 2.76u ==> 2.77v ]:
    Changes:
      * Add support GTX 860M (Maxwell based 860M are not supported)
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
    Version has been updated  [ 2.77v ==> 2.79x ]:
    Changes:
      * Add support for GTX 870M, supported features:
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
     * Update GTX 670MX: Add support for new vbios type
    Version has been updated  [ 2.79x ==> 2.80y ]:
    Changes:
     * Update GTX 870M: Add support for new vbios types +2
     * Fix cosmetic issue GTX 870M voltage thread, bar appear over some values
     * Update tool to showup in dialog as supported units 1763 for SB353x, .7xx versions
    Version has been updated  [ 2.80y ==> 2.81z ]:
    Changes:
     * Update GTX 460M: Add support for new vbios types +2
     * Update GTX 870M: Add support for new vbios types
     * Update GTX 780M: Improve boost table system to handle some special cases
     * Update MSI EC-FW Editor: Add new feature:
         - Allow Temp Threshold Hysteresis modification CPU/GPU, available for all supported MSI Notebooks
    Version has been updated  [ 2.81z ==> 2.82a ]:
    Changes:
    * Fix false possitive detections with some AVs
     * Update MSI EC-FW Editor:
         - Fix text max Threshold Hysteresis limit up to 10 instead of 15
         - Add support for GT70 Barabone [1762]
         - Add support for GT70 Medion Eraser X7821 [1762]
    Version has been updated  [ 2.82a ==> 2.83b ]:
    Changes:
    Update GTX750M:
       - Add support for new vbios type
    Update GTX860M:
       - Add support for new vbios type
       - Add dynamic boost table detection and adjustment
    Update GTX870M:
       - Add support for new vbios type
       - Update voltage identifier to improve compatibility
    Update MSI EC-FW Editor:
       - Add support for iBuypower Valkyrie CZ-27 [1762]
       - Update 16FK to add filter support for .7xx versions
       - Improve worker performance after initial loading
    Version has been updated  [ 2.83b ==> 2.84c ]:
    Changes:
    * Fixed bug: power below 66W cannot adjust
    Update GTX750M:
       - Allow Higher clock's Voltage modification
    Update GTX870M:
       - Add support for new vbios type
       - Add support for power control modifications
    Update GTX860M:
       - Add support for power control modifications
    Version has been updated  [ 2.84c ==> 2.85d ]:
    Changes:
    * Extend power range selection to 3kW
    Update GTX780Ti:
       - Add support for new vbios type
       - Update max boost system
    Update GTX860M:
       - Add support for new vbios type
    Update MSI EC-FW Editor:
       - Add support for GT72 2PC DOMINATOR
       - Add support for GT72 2PE DOMINATOR PRO
    * Fixed update issue introduced with version 2.84c: not always can detect new version
      [those who have troubles updating to 2.85d, install older version to perform the update,
       those who has 2.84c only, email me directly for manual update to the latest one fixed version 2.85d]
    Version has been updated  [ 2.85d ==> 2.86e ]:
    Changes:
      * Add support for GTX 880M, supported features:
       -Support voltage adjust for  P0, P1,P5, P8
       -Support higher clock's voltage adjust
       -Support memory clock adjust for P0, P1, P5, P8
       -Support Maximum Boost Frequency adjust [Auto adjust for P0, P1]
       -Support Boost table Frequency adjust
       -Support Essential Domain 1 Frequency adjust
       -Support Essential Domain 2 Frequency adjust
       -Support Essential Domain 3 Frequency adjust
       -Support Software GPU core OC Limit removal
       -Support GPU Boost logic Enable/Disable
       -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P1,P5,P8)]
       -Support for power control modifications
    Update GTX770:
       - Add support for new vbios type
    Update MSI EC-FW Editor:
       - Add support for WT70-2OK GT60-2OK WORKSTATION 3K IPS EDITION
       - Add support for WT70-2OK
       - Add support for WT70-2OL
       - Add support for WT60-2OK 3K IPS EDITION
       - Add support for WT60-2OJ
       - Add support for WS60 2OJ (3K IPS EDITION)
       - Add support for WS60 2OJ
    Version has been updated  [ 2.86e ==> 2.87f ]:
    Changes:
     * Update GTX770:
       - Add support for new vbios type
     * Update GTX880M:
       - Add support for new vbios type
     * Modify updater to fix AVG's issue
     * Update 460M:
       - Fixed issue, type6 read error in status report
     * Update GTX660Ti:
       - Fixed issue, type3 cannot save image issue
    Version has been updated  [ 2.87f ==> 2.88g ]:
    Changes:
    Update MSI EC-FW Editor:
       - Add support for GS60 2QE GHOST PRO 3K
       - Add support for GS60 2QE GHOST PRO
       - Add support for GT72 2QD Dominator
       - Add support for GT72 2QE Dominator Pro
       - Add support for GS70 2QE STEALTH PRO
       - Add support for GS70 2QE STEALTH PRO RED EDITION
    Version has been updated  [ 2.88g ==> 2.89h ]:
    Changes:
     * Update GTX860M:
       - Add support for new vbios type
    Version has been updated  [ 2.89h ==> 2.90i ]:
    Changes:
    * Update MSI EC-FW Editor:
       - Add support for GE60 Barabone [MS-16GC based]
    * Update GTX760M:  - Add support for new vbios type
    * Update GTX680:    - Add support for new vbios type
    * Add support for K3000M, supported features:
        -Support voltage adjust for P0,P5, P8
        -Support memory clock adjust for P0, P5, P8
        -Support Maximum Boost Frequency adjust
        -Support Boost table Frequency adjust
        -Support Essential Domain 1 Frequency adjust
        -Support Essential Domain 2 Frequency adjust
        -Support Essential Domain 3 Frequency adjust
        -Support Software GPU core OC Limit removal
        -Support GPU Boost logic Enable/Disable
        -Support P-State Terminator [ability to Disable/Enable desired P-state(P0,P5,P8)]
    * Modify updater: Replace update servers with new one  [existing owners need to email me to update to this version 2.90i]
    Version has been updated  [ 2.90i ==> 2.91j ]:
    Changes:
    * Update GTX670: - Add support for new vbios type
    * Update MSI EC-FW Editor:
       - Extend FAN % range to 120 to handle some private cases
       - Updated EC Core system to support newest EC generation
       - Add support for GT70 Medion [MS-1763 based]
       - Add support for GS30 2M Shadow
       - Add support for GE62 2QE APACHE
       - Add support for GE62 2QF APACHE PRO
       - Add support for GT80 2QE TITAN SLI
    Version has been updated  [ 2.91j ==> 2.92k ]:
    Changes:
    : Update MSI EC-FW Editor:
       * Add formal support(those are already supported,but wasn't listed officially as supported) for:
          - GT80 2QD Titan SLI
          - GT72 DOMINATOR DRAGON EDITION
          - GT72 DOMINATOR PRO DRAGON EDITION
          - GT60 2QD DOMINATOR 3K EDITION
          - GT60 2QD DOMINATOR
          - GT70 2QD DOMINATOR
          - GT60 2QE DOMINATOR PRO 4K EDITION
          - GT60 2QD DOMINATOR 4K EDITION
          - GS70 2QE STEALTH PRO SILVER EDITION
          - GS60 2QE GHOST PRO 4K GOLD EDITION
          - GS60 2QE GHOST PRO 4K
          - GS70 2QD STEALTH
          - GS60 2QD GHOST
          - GE60 2PL APACHE
          - GE70 2PL APACHE
          - GE40 2PC DRAGON EYES
          - GE60 2PF APACHE PRO
          - GE60 2PG APACHE
       * Add support for:
          - S20 SLIDER 2
          - GE72 2QE APACHE
          - S20
          - S30
          - S12T
       * Extend temp hysteresis value range to 20
    : Update some outdated .asm modules to avoid and reduce false detection by some AVs,
    and contacted some AV vendors to fix their false detection and to gain their approval to add some of the modules in their white-list.
    Tested with:
         -Symantec/Norton  √
         -AVG 2015 √
         -Avast! 2015   √
         -Nod32   √
         -Microsoft Security Essential

  • Re: Svet's Fermi/Kepler VBIOS/EC Tuner - [ver: 3.02w]

    Hi sorry for my bad english
    I have a MSI gtx 750 tf 1gb oc card. I buyed last year, but probably my motherboard (asrock h87 pro 4) killed my card. But the card have a warranty until 2017. So i send the store for fixing. But the store says i lost the wa...

    Quote from: Capt.Alberto on Today at 15:52:52ohhhhh thats something useful to know ! hah
    they should tell us what are "normal" temp so we don&#39;t freak out as "newbies"
    Yes, nothing to worry about

  • Unlock BIOS GT70-2OD DE2 Extreme and Kepler VBIOS Tuner

    Hi Svet.
    Pls. unlock bios w8_E1763IMS.70C
    Firmware w8_1763EMS1.505
    And pls. download Kepler VBIOS Tuner
    Donate Confirmation number: 0GH666752D547031X

    Hi Hmel,
    Quote
    Pls. unlock bios w8_E1763IMS.70C
    Oki, working on it and will send back to you when its done[normally in 2-3 hours]
    Quote
    And pls. download Kepler VBIOS Tuner
    Donate Confirmation number: 0GH666752D547031X
    checked it and its enough for it, has been sent as well

  • Unlocked BIOS with ME and VBIOS/EC tuner

    Svet,
    I am looking for an unlocked bios for MS-176262-072 with ME and your VBIOS/EC tuner.  Current bios version is E1762IMS.50X but the 70X would be fine as well.  Donation has been made Confirmation number: 7YG220867C372153C.  One last thing, I flashed a modified VBIOS on this card almost a year ago.  I can't locate my backup  and have not had any luck through MSI getting a copy of an original for a 675MX 2g.  If you have a copy or know where I can find a copy, it would be greatly appreciated.  Thank you in advance for the help!

    received it
    Quote
    I am looking for an unlocked bios for MS-176262-072 with ME
    oki, check PM for queries and next steps
    Quote
    and your VBIOS/EC tuner.
    done, sent it to you
    Quote
    One last thing, I flashed a modified VBIOS on this card almost a year ago.  I can't locate my backup  and have not had any luck through MSI getting a copy of an original for a 675MX 2g.  If you have a copy or know where I can find a copy, it would be greatly appreciated.  Thank you in advance for the help!
    i don't know which one is your original one, there are more than one versions

  • Very Annoying Problem Installing i-Tunes Ver 8.02

    This rambles... But bear with me...
    So I moved from London to some small village in the middle of nowhere. I had broadband before moving and when I got here I found that I COULD NOT GET IT HERE ONLY DIAL-UP. Now I know that some of you are rolling your eyes and coming up with quick fixes to my problem but when I stopped using i-tunes I had version 6 on my PC which has worked fine till now. I received a shiny new touch for Xmas from my son and so I downloaded i-tunes 8 as per the literature and needs of the machine (yes it took 6 hours). Now the problem I have is that when I try to install it, it keeps starting the install then going through the motions before telling me twenty seconds later that its installed version 8.02.
    The cunning thing now is that it hasn't so what is going on.....?
    I've tried all the tools within Windows and that hasn't worked. I've also tried uninstalling Quicktime and i-Tunes ver 6 but all that has left me with is no i-Tunes.
    I've tried some of the kind suggestions already posted to other forums in the vain hope it will work but nothing..... PLEASE HELP

    hi Steve!
    there is no error message, it installs succesfully then i try to run it and after i double click, nothing happens at all!
    okay, so it's
    b not
    crashing.
    we'd better check the usual suspect in these cases first. Are you running Norton Internet Security 2005? if so, see:
    b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
    if those techniques aren't applicable to your situation, or if you run into troubles with them, post back to tell us what other security packages you're running or what problems you encountered trying to use the techniques.
    love, b

  • The MSI GT72 Dominator Pro Owner's Lounge

    Hi Folks, this will be a work in progress, and will be updated as more information becomes available. This topic is also discussed at the NBR forum, HERE!
    ***The MSI GT72 Dominator Pro..... the next great SUPER POWER..... awesomely SEXY too!***
    Welcome to the MSI GT72 Dominator Pro Owner’s Lounge! Available Now..... Order Yours Today, and Prepare to Dominate!
    MSI GT72 Dominator Pro Models, Specifications, and Product Links:
    Specifications
    GT72 Dominator Pro-010 | MSRP: $2,599.
    GT72 Dominator Pro-007 | MSRP: $2,999.
    GT72 Dominator Pro Product Pages:
    MSI U.S.
    MSI Notebook
    MSI Gaming - Dragon Army HQ
    MSI Global
    Where To Buy Your New MSI GT72 Dominator Pro Notebook:  
    Friendly, reputable, and highly respected resellers, who freely volunteer their support to forum members:
    1.) GenTech PC | Website | MSI 17" notebook site page | Tel#: 1-800-990-7945 | email: [email protected] | Contact: Ken Lee
    2.) PowerNotebooks | Website | MSI notebook site page | Tel#: 1-877-711-1777 | email: [email protected] | Contact: Donald Stratton
    3.) Xotic PC | Website | MSI notebook site page | Tel#: 1-877-289-9684 | email: [email protected] | Contact: Justin Nolte
    4.) RK Computers | Website | MSI notebook site page | Tel#: 1-866-760-4998 | email: [email protected] | Contact: Rob M
    Where To Buy MSI Notebooks (U.S. & Canada) | Global
    MSI Helpful Links:
    MSI Gaming
    MSI AfterBurner
    MSI Dragon Army Forum
    MSI HQ User Support Forum
    MSI Customer Service | Global
    MSI Notebook Warranty Information
    MSI Notebook Product Registration | Global
    Official MSI GT72 Dominator Pro Product News:
    17 July 2014: MSI Unveils GT72 Dominator Pro, the Benchmark Breaking Desktop Replacement
    22 July 2014: Evolution of the ultimate GTX's gaming laptop MSI GT72 Dominator/Pro Gaming NB, brand new design and unique features with latest NVIDIA GTX graphics
    29 July 2014: GT72 Dominator Pro Receives Best of Computex 2014
    Official MSI GT72 Dominator Pro Downloads:
    Bios
    Drivers
    Firmware
    Utilities
    Manual
    Gaming Mouse Driver
    Other Downloads:
    NVIDIA GeForce Final Release Drivers
    NVIDIA GeForce Beta Release Drivers
    NVIDIA Control Panel User's Guide
    Latest NVFLASH for Windows & DOS
    MEMTEST86 Free Download
    MSI AfterBurner
    CPU-Z
    GPU-Z
    NVidia Inspector
    HWMonitor
    FutureMark's 3DMark & PCMark8
    AIDA64
    Atto Disk Benchmark
    HD Tune
    Svet's Fermi / Kepler VBIOS/EC Tuner Version (2.84c) GTX-880M support soon! :D
    Treexy Driver Fusion ( .....replaces the ever popular, Phyxion 'Driver Sweeper')
    Piriform 'CCleaner'
    Magical Jelly Bean (product key finder)
    GT72 Dominator Pro Factory 'Stock' Hardware Info ***May vary and subject to change***
    CPU: The 4th Generation Intel® Core™ i7-4710HQ
    GPU: NVIDIA® GeForce® GTX 880M (Kepler GK104M) | Intel® HD Graphics 4600
    Chipset: Mobile Intel® HM87 Express Chipset
    Wireless: Qualcomm Killer N1525 Wireless-AC | driver download
    Ethernet: Qualcomm Killer™ E2200 Game Networking | driver download
    Bluetooth: Qualcomm Atheros QCA61x4 Bluetooth 4.0
    Screen Panel: Innolux Corporation | Chi Mei, ID: CMN1735 | Model: N173HGE-E11, Matte | Product Specification
    HDD: Hitachi Global Storage Technologies, HTS721010A9E6300 = 1TB | Travelstar 7K1000, 7200 RPM, SATA III
    SSD: Toshiba, THNSNJ128G8NU, 128 GB M.2 | Firmware
    Optical Drive: LG Electronics, HL-DT-ST-BD-RE-BU20N
    Memory Modules: Kingston, DDR3L 1600MHz, MSI16D3LS1KFG/8G
    Webcam: Suyin Corporation, USB 2.0, 1080p
    Touchpad: Synaptics | MSI : Which touchpad is in my notebook & drivers?
    Keyboard: SteelSeries
    Speakers: Dynaudio | Dynaudio and MSI
    Card Reader: Realtek RT55249
    USB 3.0 Host Controller: Intel (HM87 Express Chipset) | USB 3.0 Specification
    Thermal Paste: MX-2
    AC Power Adapter: Delta Electronics Inc., Model: ADP-230EB T, Output: 19.5V DC, 230W Input: 100~240V AC, 50/60Hz universal
    Videos
    [video=youtube;lN_jYTTYsTs]
    How To's:
    Are 'start-up' screens too fast to enter bios? This is how to enter the Legacy / UEFI BIOS.
    Windows 8 Tutorials, Quick Reference Index
    Guide on how to install the NVIDIA Display Driver under Windows 7/Windows Vista
    NVIDIA Driver Rollback/Removal Instructions
    Clean install of Nvidia drivers, NVIDIA Forums> Graphics Technology> GeForce GTX & ION Drivers
    User Benchmark Test Results:
    Other GT72 Thoughts:  (please PM if you have other suggestions.)
    Suggested Backpacks or Cases:
    1.) The Everki Beacon Backpack..... a perfect fit! | At NewEgg | NewEgg Product Tour | At Amazon |
    2.) The Targus 17” XL Backpack | At NewEgg | At Amazon |
    3.) The Everki Lunar Laptop Bag | Everki Lunar Video | At NewEgg | At Amazon |
    4.) The Wenger 17" SwissGear Ibex Backpack | At NewEgg | At Amazon |
    Other Cool Tools or Helpful Additions:
    1.) The Steelseries Sensei Wireless Laser Mouse | At Newegg | At Amazon
    2.) The Steelseries H Wireless Gaming Headset | At Newegg | At Amazon
    Considerably improved over the GT70, purchased from Ken at GenTech PC, I am one of the first official GT72 owners on the planet.
    So, what improvements does the GT72 bring to the table?
     1. Improved chassis design.
     2. Larger touchpad, smooth and seamless with the palm rest.
     3. A large, cool to the touch, glass-like polymer palm rest.
     4. More USB 3.0 ports.
     5. A 230W PA.
     6. A 1080p webcam
     7. Revised Steelseries keyboard, flex-free, with brighter back-lighting.
     8. Dual fan cooling solution, with improved chassis vent design, a better fan control profile, ergo.....
     9. Better overall temps, with quieter operation.
     10. Re-designed chassis, and finally a new model designation.
     11. Gone is the problematic capacitance touch bar, replaced with positive touch switches.
     12. Gone is finicky Optimus switching, replaced with a simple dedicated GPU switch.
     13. mSATA SuperRAID 2, is replaced with M.2 SuperRAID 3, increasing speed, and the capacity of the RAID set. ( M.2 should improve significantly with the Intel 9-Series chipset)
     14. Killer Doubleshot Pro, wherein Ethernet and Wireless can be used independently, or simultaneously for improved bandwidth.
     15. And finally, due to the overall re-design, a more intuitive gaming experience.
    Who amongst you dares to Dominate with the next great 'Weapon Of Mass Destruction'? Join me! Gear Up! Git ur' battle-kit squared away, and I'll see ya on the battlefield!
    ENJOY!
    :D :D :D

    Initial thoughts......
    Well, here it is..... the MSI GT72-2PE Dominator Pro-007US, and the photos below do not do it justice. It's Bold, it's Bad, it's Fast, it's Powerful, and honestly, there is not much, not to like about this notebook. If there is one thing I feel could have been better, it would be the display. The Chi Mei CMN1735 has good brightness, color, and contrast, but lacks decent viewing angles.
    Anyhow, I have already spent a lot of time with tweaking, photos, benchmarks, etc., so I am going to cut-to-the-chase, and try to make this as short as possible.
    As to performance, the benchmarks below attest to the GT72's awesomeness, so what about noise, and the redesigned dual-fan cooling solution? Simply put, it is quieter than the GT70, has a better fan profile, and temps are well managed. Given the hardware, of course you will hear the fans spin up when the system is stressed, but it is not at all disturbing..... and when doing common task, the fans are only noticed if you get close and cozy with the system. Ambient room temperature was 78F, and the system's idle temps were CPU@38C, and GPU@36C. Without the use of Cooler Booster ('stock' fan profile only), during benchmarks the CPU reached 78C, and the GPU averaged 80C, peaking to 82C during the 3DMark Sky Diver benchmark. The palm rest remains cool to the touch, it's polymer is smooth as glass, and it's surface is seamless across the touchpad. Only a mild warmth rises from the keyboard.
    The Steelseries keyboard is indeed flex-free, keys are very positive and responsive, and the back-lighting is brighter..... which I attribute to the keyboard's re-design. Looks awesome!
    So what about SuperRAID 3, is it fast? Oh YEAH! Performance exceeds SuperRAID 2, as expected, and the system boots to desktop in as little as 6 to 7 seconds. HD Tune Pro reports an average read time for the Toshiba M.2 SSD's, as 1535MB/s..... while the previous SuperRAID 2 Sandisk X100 mSATA SSD's was an average of 1411MB/s. On the other hand, SuperRAID 3 really shines in the Crystal Disk Mark scores. To best evaluate the 'Real-World' performance of SuperRAID 3, I used the PCMark 8 Storage Test. For those unfamiliar with this benchmark, the performance score of 5014 is very respectible. The duration of this grueling benchmark is generally 1 to 3 hours, and the GT72 sped through in just 1 hour and 8 minutes. All in all, I applaud MSI's use of the new M.2 SSD's, but I think performance will most improve with future 9-Series Intel chipsets.
    With all the attributes I've mentioned above, it is when gaming, that you understand the mastery of it's intuitive design. The re-designed flex-free keyboard, the large smooth & heat-free palm rest, the spatial Dynaudio speakers, and vivid display, all lend to an immersive gaming experience. So much so, I found myself playing my test game, far longer than originally intended.
    To run the GT72 through it's paces, I chose the recently released, AMD optimized title, Sniper Elite III, by Rebellion. With settings max'ed to 'Ultra', the GTX-880M smoothly sliced through the frames like a hot knife to butter, with frame-rates from 54 to 82Fps, averaging at 65Fps. Game play was extremely smooth and fluid, and never a hic-cup or artifact.
    To represent the 'Out-of-the-Box' experience, I played with the stock fan profile, and Cooler Booster was never used. Like with my benchmark testing, the fan noise was not disturbing, and game audio though the Dynaudio speakers easily comes to the forefront. Fan noise was never a distraction. Temps of the GPU peaked to 82C, but averaged 64C, and the CPU peaked at 68C, averaging 54C. Again, with hardware like this, and without the use of Cooler Booster, these temps are outstanding.... and the new dual fan design is a success!
    Initially I intended my game session to be an hour..... in no time it became 3+ hours, and playing on this notebook is simply FUN!
    The look and feel is very stylish, and smooth finish is actually somewhat fingerprint resistant. Overall, with these great looks, it's fully loaded system specs, and stellar performance scores, the MSI GT72 Dominator Pro not only entitles bragging rights..... it DEMANDS them!
    All of this has me VERY excited for the upcoming next-gen 9-Series, Maxwell, X-treme Edition GT72! Can't wait!
    Enjoy!

  • Unlocked Bios GT70 0nND

    hi i have GT70 0ND with i7 3610QM, 12 gb ram and Nvidia 675m with nvidia driver 335.23 i need unlocked bios for overclock cpu and GPU voltage and other this is available?
    THX
    Giovanni

    Quote
    what is it Svet's Fermi/Kepler VBIOS/EC Tuner?
    its my tool for vbios and ec-fw modification
    Quote
    i have upgrade bios but i dont find overclock cpu inside new bios you have guide for learn?
    i don't give such guides how to OC,
    but will give you a tips on how to in PM
    done check pm for cpu oc options tips, where to find them and how to use them

  • MOVED: Chiligreen Mobilitas PJ 0980 Voltmod Request (GTX675M)

    This topic has been moved to BETA & MOD BIOS Section.
    https://forum-en.msi.com/index.php?topic=165803.0

    You have already been told in "Svet's Fermi/Kepler VBIOS Tuner"-thread that Svet doesn't mod for free. In addition you are asking for modding a non MSI product on a MSI forum. No one here will mod your Chilligreen laptop for you
    -- TOPIC LOCKED --

  • GTX 770 MSI N760 TF Gaming 2GD5/OC Always 50 Degrees?

    I'm not sure what's going on here. I upgraded from Tri SLI GTX 470 cards with reference coolers to the MSI N760 TF 2GD5/OC. My old video cards would always come near 85-90 degrees when overclocked. But this new MSI N760 TF 2GD5/OC never gets any hotter than 50 degree even with Boost and a small user overclock. I'm worried something might be wrong here. But if not, why would you make a video card with all that cooling power and not allow higher voltage that +12? It seems like a waste. I feel like I should have just bought the GTX 760 Hawk. At least that one has unlocked voltage for  higher overclocks. There's a huge $110 difference between these two cards.
    Do you think maybe one of the 8-pin power connectors is not working? It just doesn't make sense at all to do something like that. Do you think it might have something to do with my ASUS Hero motherboard? That thing sometimes acts retarded with USBs, so maybe it's reporting false temps?
    GTX 760 Hawk
    GTX 770 Gaming
    System Specs:
    MAXIMUS VI HERO
    Intel i5 4670k
    RX-1000AE 1000w ATX Power Supply 80 Plus Gold PSU

    Quote from: badboy2k on 09-October-13, 02:24:07
    read about nvidia greenlight its NVIDIA that restricts how much voltage can be used or they void the GPU warranty on the core.
    older cards had unlocked voltages but not now (some users where applying more voltage then the chip could safely use and it was Vaporising the silicon on the chip killing them over time and they started it with the Nvidia 6xx series cards so its been around for a while as users where overvolting them and causing overvoltage damage to the GPU so they locked it down or no manufacturer cover for the GPU from nvidia if they did not)
    with the hawk models they allow you to overvolt them more but pass the lost cover (as no Greenlight) for the GPU onto the end user!
    Crap ya I did screw that title up. Like I said, you can't go back and re-edit a post after so many minutes have past.
    Anyways, I have the GTX 770. The thing never goes above 50 degrees Celsius. That's extremely cool I know. Every single video card or CPU I've had I've been able to red line to the max temp though, regardless if my voltage is locked or not. There's always seems to be some kind of point you can reach and the damn thing just shuts down. This card is beyond bizarre. Is it possible that I will never ever see 85 degree on this card? If that's the case, why make a video card like this and not even sniff it's critical point? Am I to guess that's what the 780 or Titan would be then?
    I've seen nothing online to help me determine if I'm better off getting the GTX 760 Hawk over this GTX 770 Gaming one. My understanding is that the only advantage is maybe a +13 voltage increase and +185% Power Limit over the GTX 770's +12 voltage and 111% Power Limit. I have Svet's Fermi/Kepler VBIOS Tuner, so getting the +185 Power Limit on the GTX 770 Gaming is not a problem. So the GTX 770 Gaming has some room to overclock. I mean the ASUS Maximus VI motherboards and Haswell CPUs were overclocked at like 7GHz and the damn things weren't even released yet, lol. Where are those results for the Hawk and Gaming?
    I was also hoping someone might know the difference in the potential of the 760 Hawk and 770 Gaming. I've seen overclocked reviews for the 760 Hawk, but none that talk about the unlocked potential. I know the 760 Hawk can sniff the GTX 770 in performance, but that's using stock overclocking methods. I would like to know if anyone has been able to successfully overclock the 760 Hawk past an overclocked GTX 770.

  • Error 1719 can't install I-tunes

    Got an Ipod nano,2cd gen. and I have I-tunes ver 6 on my Win's pc. Tried to download Ver.7, and it says Can't install due to inability to find Windows Installer. Error 1719. I went to control Panel and tried to delete the old version, and got the same message. I've rebooted the pc, I've gone to MS's webpage and downloaded a "patch' something about needing a virtual thingy, and that didn't work. Does anyone have any ideas? And why is this happening? Thanks
    H.P   Windows XP  

    Ok, I've called Microsoft, and installed a new installer, ver. 3.1, Microsoft will not help me, due to having an OEM machine, and I have to pay $79 to talk to them.
    I've called the Manufacturers of Ipod, and they tried to setup a new "profile" for me , but it kept coming up w/ can't install , can't un-install. The guy told me to call Microsoft and if that didn't work call back. I haven't called back yet because I've spent 3 days since I've gotten this "present" working on getting one silly jukebox. Sorry, I'm frustrated. Can I take the darn thing back? Or is there something else I can do? I tried the Win's Cleanup Utility, installed the VBscribt, and like I said installed the Ver.3.1 installer and nothing will allow me to install this Version of I-tunes. What else is there to do???? Thanks for your help, I do appreciate it, just verrry frustrated.
    Kriya

  • I-tunes close by itself

    I have installed my I-tune ver 6 several times but my i-tunes just cannot stay on screen, the program closes automatically after 1 min or less. Its very frustrating as i can't upload my songs into my Ipod video smoothly.
    Anybody can help me? Thanks

    Close the Mail app in the Task Bar and re-launch.
    Double-click the Home button to reveal Task Bar. Hold Mail app down for a second or two; tap the minus sign to close app.
    If it still doesn't work, try a reset.
    Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Msi gtx 580 twin frozer II oc crash

    hello people,
     i have  problem with my kaart  gtx 580 twin frozer II /oc
    When i play battlefield 3 crash my pc  livekernelevent code 1001
    Windows Error Reporting
      - EventID 1001
       [ Qualifiers]  0
       Level 4
       Task 0
       Keywords 0x80000000000000
      - TimeCreated
       [ SystemTime]  2012-06-17T21:14:51.000000000Z
       EventRecordID 2534
       Channel Application
       Computer GEBRUIK-BO6VDBI
       Security
    - EventData
       0
       LiveKernelEvent
       Niet beschikbaar
       0
       C:\Windows\LiveKernelReports\WATCHDOG\WD-20120617-2314.dmp C:\Windows\Temp\WER-23566010-0.sysdata.xml C:\Windows\Temp\WER97C3.tmp.WERInternalMetadata.xml
       C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_cab_162f97c3
       0
       796765d6-b8c1-11e1-bdbd-14dae91fca1a
       4
    Already tried various nvidia drivers but still a crash happens different sum 5 min then again 30 min in the game can someone my with this problem.
    I have sent an email after msi service there I got the answer I the last driver from nvidia had to download.
    Thanks for contacting MSI technical support. Regarding your concern, we suggest you remove the previous driver.
    This problem has not resolved old card so done in there there no trouble I think done asus 465, the problem is that the gtx 580 is overclockt.
    Go get some other things testing and waiting for replies EA
    Svet can you help me!!!!!!!!!!                   bas has told me you can help me

    Quote from: lastigventje on 26-June-12, 21:24:43
    i have my another video card asus 465 and hey gives no problems in this computer
    But i have no problem by another games only by battlefield 3
    But is my bios of my video card or not up-to-date
    The program of your  on the site can I use him {Svet's Fermi VBIOS Tuner - [ver: 1.28s]} or not for my video card
    Quote from: lastigventje on 26-June-12, 21:24:43
    i have my another video card asus 465 and hey gives no problems in this computer
    But i have no problem by another games only by battlefield 3
    Apply 1050mV from Afterburner then retest with BF3
    Quote
    But is my bios of my video card or not up-to-date
    your vbios is up to date
    Quote
    The program of your  on the site can I use him {Svet's Fermi VBIOS Tuner - [ver: 1.28s]} or not for my video card
    Yes you can use it

  • GS60 Remap Fn/Win keys and unlock BIOS

    Svet,
    I've made the donation and I have your VBIOS/EC Tuner, but it appears that all I can do with that is overclocking tweaks and fan control, etc.  What I'm trying to do, however, is remap the Fn and Win keys. 
    Can you get me a custom EC image or a way to edit the keyboard mapping?  Also, if it's not too much trouble, I wouldn't mind unlocking the BIOS while we're at it...
    I have a GS60 2PE Ghost Pro 3k edition:
    BIOS Version: E16H2IMS.10B
    BIOS Build: 08/16/2014 20:37:44
    EC Version: 16H2EMS1 Ver5.07
    EC Build: 07/18/2014
    Windows 8.1 x64
    Thanks for your time! If this works I will totally donate again :-)

    Yes, the tool is not related to keyboard mapping or system BIOS unlocking,
    which can be done with separated private requests instead
    Quote
    Can you get me a custom EC image or a way to edit the keyboard mapping?  Also, if it's not too much trouble, I wouldn't mind unlocking the BIOS while we're at it...
    I have a GS60 2PE Ghost Pro 3k edition:
    BIOS Version: E16H2IMS.10B
    BIOS Build: 08/16/2014 20:37:44
    EC Version: 16H2EMS1 Ver5.07
    EC Build: 07/18/2014
    Windows 8.1 x64
    Thanks for your time! If this works I will totally donate again :-)
    Yep its possible for both,
    i can start work over over them once donation is received:
    https://forum-en.msi.com/index.php?topic=134259.0
    and to send them back to you later when it's done, after 4-5 hours

  • Some questions about your custom unlock bios.

    Hello Svet,
    Just new with msi gs60 ghost pro 2qe. Want to know if the bios unlock is possible for me and is it possible to lower my fan speed with this custom bios from you. I am newbie with custom bios mod but i know how to flash a bios. Hope you can help me with this.
    GPU : gtx970M
    BIOS : E16H5IMS.10C
    VBIOS :
    EC : 16H5EMS1 Ver.5.04
    Ps There is a newer bios and ec firmware update for my msi.

    Thx for your reply. So do you expect in future there can something be done with the fan control of my msi? When i read this form a lot of other laptops can be done the fan control with your custom bios, or have i wrong? Can you send me some information(if there is) from your custom bios? So i can understand what kind of options there are. Thanks in advance.

Maybe you are looking for