Re sync after updating itunes and ipod

my itunes will not recognize my nano after i updated the ipod and itunes. PLEASE HELP. my nano has no music on it now - so im stuck.

Brian,
I think quite a few people, including me, had this problem. Have a look at this thread for a solution:
http://discussions.apple.com/thread.jspa?threadID=561013&tstart=75
Hope it works!
Ric

Similar Messages

  • Cannot backup and sync after updated iTunes

    Cannot backup and sync after updated iTunes. Have tried to hard reset iPhone (all data lost- sad) and reinstalled iTunes. Still cannot work.

    It sounds like you bough the song only, not the song and the ringtone.
    Ringtones via itunes are available in the U.S. only.
    In the U.S. to make a ringtone you:
    Buy the song with a bell - 99 cents
    Find the song in your library and click the bell
    This bring up the editor.
    You edit the song to the portion you want.
    Then click buy to purchase the ringtone - another 99 cents.
    Then it shows up in ringtones and you can sync.
    As I said, this method of creating ringtones is available in the U.S. only.
    There are, however, many ways to make ringtones:
    http://www.iphoneatlas.com/2008/01/02/guide-the-many-methods-for-using-custom-ip hone-ringtones

  • My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

    My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

    Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

  • After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe initializes and takes up 50% of CPU

    After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU.  When i attempt to sync my iPhone iTunes hanges on backing up.   I have uninstalled all the apple software and reintalled it.  This fixed the problem until QuickTime updated.  Immediately following the update Apple...Services.exe went haywire agian.  Any help?

    Thanks wjosten.  I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
    However, I have not progressed really.  Any other thoughts on this please?

  • My iphone 3gs wont update. itunes and ipod touch update no problem, my GF has exact same phone and hers updated also...any advice?

    My iphone 3gs wont update. itunes and ipod touch update no problem, my GF has exact same phone and hers updated also...any advice?

    If I was in your shoes, I would choose to restore the iPhone with iTunes and then choose to NOT restore a previous backup.  I'd then go on to set up the phone as though it were totally new, and choose the stuff to load onto it.
    The reason I'd go through that trouble.. even though it meant losing a lot of settings and having to set stuff up again .. is because I wasn't sure I could trust the backup that it's restoring from.
    If you have trouble again after doing the fresh reload -- especially if it's soon after you do it -- you may have a hardware issue with the phone, such as faulty flash memory or a processor chip that's failing. If that's the case, you'll want to consider your repair/replacement options at that point.

  • Exception processing message 0xc0000013 after updating itunes and Quicktime

    After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
    I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
    I'm using Windows Vista and this is driving me nuts.
    Any help would be greatly appreciated.

    I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
    . It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

  • IPod messed up after installing iTunes and iPod update...

    Two days ago I updated my iTunes and iPod to the latest updates. Now my iPod makes funny noises that I can hear through the back (without any headphones or anything) and some songs will only play for about 30 seconds and then the iPod just freezes up, makes funny noises and I am unable to turn it off. I found that by holding down the 'select' and 'menu' buttons together, the iPod will restart. I have tried restoring my iPod and it still has the same problems. Any ideas? Is this happening to anyone else?
    Dell latitude   Windows XP   iPod 30GB

    This is VERY similar to what's going on with my iPod, except mine will reset when I try to play certain songs.... I think Apple might have a few bugs left in their new software...

  • Updated iTunes and iPod software  iPod not showing up under devices in iTunes

    Updated software since computer said there were updates.  Now I'm having trouble with iPod not showing up under devices.  Have gone through all the steps under troubleshooting.  Nothing helped.  Had this same problem periodically in the past, as well.  Itunes also says I have an app I reinstalled today due to it not working properly, and it won't synch with iPod.  (earlier today, iPod was showing up and synching properly, but this app wasn't getting downloaded to the iPod.  Just shows up in iTunes.  HAve tried restarting computer, iTunes and iPod, but no luck.

    Thank you but I have tried this and it still does not show up.  I even tried to delete itunes and reload it but the computer says that it is not able to delete itunes.

  • Porblem: 3Gs not recognised AT ALL after updating itunes and trying to update phone

    Have updated itunes and tried to update Iphone 3gs.  Now I have connect to itunes display on iphone, and when I connect, I get "new hardware not recognized", "iphone in recovery mode", and device does not come up in itunes.  In device manager "?!" are shown in "other devices" next to "iphone in recover mode".
    Any ideas?  I've been trying all day to fix this.
    Currrently when I plug in the Iphone, the computer completely ignores it and no reaction, so seems to have got a bit worse!
    I'm using PC, Win XP SP2.
    I've tried all my USB ports, and various fixes I've found online, but happy to keep trying them if you have any ideas???!?!!?!
    At the moment my iphone is dead/blank/part restored, so can't do any solutions that require the functions of the phone.

    Thanks wjosten.  I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
    However, I have not progressed really.  Any other thoughts on this please?

  • Ipod Touch won't sync after updating iTunes

    I updated my iTunes and now my ipod touch will not sync, it says that the ipod is synced with another iTunes library when it is not, is there a way to get it to sync?

    With all the synced media like apps and music in your iTunes library do the following:
    - Make a backup in iTunes by:
    iOS: How to back up
    - Restore the iPod from that backup. The above link includes that restore from backup instructions.
    Somehow updating iTunes caused iTunes/iPod to think it was not synced to this library. That happens sometimes.

  • Unable to sync after updating iTunes to 11.1 and phone to iOS 7

    We updated our phones to the new iOS7 tonight and in the process updated iTunes to 11.1.  Unfortunately, now when i connect my phone to the computer to sync it with iTunes, I do not have the option to Sync.  I can change my music selection and choose "apply" but "sync" never changes to a clickable button.  Any suggestions or ideas would be helpful.

    I had this problem also. I just rebooted my iPhone 4S and now it sync properly. Hold the home button and power button together at the same time for about 8-10 seconds and only release them when the Apple logo appears on the screen. Give your phone several seconds to finish booting and register on the cellular and wifi networks and then see if you can sync.

  • Iphone not syncing after updating itunes 10.5. pls help

    Hi apologies but I am new to all this stuff.  I updated itunes to version 10.5 and I think my iphone 4 was synced in during this.  After itunes had updated I found that my iphone wasnt synced in any longer.  I pulled out connecter and re connected but still nothing.  Rang apple tech support (on hold for an hour in cue).  They tried couple of things and then advised to uninstall itunes then reinstall.  I have done that but still not recognising iphone.  I can sync to my other apple computer but if I try and upgrade to iOS5 on that it says I need to go to the normal computer it is synced with or I'll lose some apps etc.  I dont think my iphone has the latest iOS 5 on it yet.  Can anyone pls help?  Apple support now closed :-(  thanks

    I am also in the same boat.
    Windows 7 on Alienware laptop - no problems at all until upgrade of iTunes client to 10.5. 
    After the upgrade, attempts to sync my iPhone 4 hang at "Step 1 of 4: Backing up Rob's iPhone" (for over 12 hours)
    I have read hundreds of documents with various solutions.
    1) Delete backup file from C:\Users\<name>\AppData\Roaming\Apple Computer\MobileSync\Backup
    2) Stop stuck MDCrashReport and AppleMobileBackup processes
    3) Reinstall iTunes
    It all FAILS.  I work in IT and can assure you that nothing changed but whatever was changed by the iTunes application as it was upgraded to 10.5.  This 2 day extravaganza is ridiculously frustrating and creating a rabid anti-apple sentiment in my house.  Why the F would you (Apple) release something that is mandatory for me to use with my iPhone and have it be this buggy P.O.S.?  (Rhetorical - no need to answer, please just fix this problem so I can sync and backup my phone).
    Non-plussed

  • Missing music after updating iTunes and iPhone os

    After updating to the latest iTunes, I have lost huge amounts of music, and I can't find them on my computer at all. We wanted to install the latest OS on our phones, and to do so, you need the latest itunes version. After intalling the latest itunes, and subsequently the latest software for the iphones, a large amount of the music has disappeared. It has all come off of the iMac (which holds our entire library) and includes a mixture of purchased from two different accounts and songs from CDs that have been imported.
    I have tried searching for the files on my computer and they cannot be located. Stranger still, I have Apple's Time Machine and have looked back to before the update, and they aren't there either, which is completely bazaar as they are in the itunes library and we used to listen to them on this computer? Is it possible that the files names have become corrupt and the tracks are there but don't associate with the names?
    Please can anyone help?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • After updating iTunes, my iPod will not sync properly

    Recently iTunes prompted me to update the version 10.2.2.12.   This seemed to go successfully.   However, now I get a -50 error message for about 100 various songs when trying to sync with my classic iPod.   I am unable to sync the whole library nor can I sync just selected playlists.   This never happened before.   I have tried the reinstalling .dll files to no avail.   Any suggestions?

    To make this your syncing computer and not lose anything see:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Problems After Upgrading iTunes and iPod software

    My Goddaughter recently updated her iTunes to the newest version and her iPod to OS6. Now when she open iTunes, the top tool bar that used to have "File, Edit, View, ....tools., etc., is now blank. Is that supposed to happen or is this a new feature of iTunes 10, so now we would find those capabilities in another location? We are lost, and have tried uninstalling and reinstalling the software several times just to have the same end result. Also when she syncs her iPod to iTunes, it connects but the window that opens has absolutely no text whatsoever.

    You might try rebooting your computer. Select Shutdown and let the computer turn off. Then start it up again and see if the problem is corrected.

Maybe you are looking for

  • Can't update AIR, asks EULA forever.

    Can't update AIR. I'm using htc sync and each time I try to update AIR aks to accpet EULA. There is a problem in the Windows log . As my W7 is in spanish the message is in spanish. I also attach the last lines of the air log. [2013-01-08:18:14:32] be

  • Size of photo galleries in iweb

    Is there any way to make the size of the web galleries created in iweb larger? Am i stuck with that size only? If there is, and I do resize, do i have to input my pictures? thanks.

  • How can I get rid of the app Bird Clock?

    does anyone know how to delete/remove/trash the Bird Clock app? It is huge on my screen-doesn't shrink down..and I cannot get rid of it! when I try to throw it in the trash it says I can't because it is "open"..so how do I close it? Help! what a jist

  • How to Upgrade PHP 5.3.6 to 5.3.7

    I've been advise by GoDaddys Web Scan Security product to upgrade my current PHP version 5.3.6 to version 5.3.7 as the newer version fixed some security issues.  I'm running Mac OS X Server 10.6.8 on a MacMini.  I've been Googling around and can't fi

  • How to troubleshoot permissions issue

    Hi, I have a SharePoint site and have added an AD group to a SharePoint group but users in the AD group still cannot access the site.  When I add the AD group directly to the site it works as expected. Is there any "must check" items that could poten