Re-synching multiple edits on one of multiple tracks

I am having sync problems in sequences that had randomly accepted non- 48htz audio rate captures. As I look at the series of edits which are now all out of sync and all located on the same track and wonder if there is a way to resync them easily across the board. The sequences have three angles all edited on respective tracks. I could slip the errant edits individually but that would be inefficient at best. Am I missing a logical work thru to repair the funky sequences? I did try adjusting them all at once by adjusting them universally but it only seemed to correct the specific sync I used as the master for the balance. Any thoughts on this?

By the way, the errant audio files were exported and re-imported as 48KHz. Although this has stabilized the sequence I am still pondering a logical solution to repairing the edits on the track that is out of sync.

Similar Messages

  • Multiple entries for one album and tracks are diveded between entries

    After adding all my music into iTunes I have some albums listed multiple times with one or two tracks listed in each one. How can I get all the tracks for that album listed all together? Also is there any way to import album art from another program. Windows media player has all the album art and iTunes is missing about 40 percent of them?

    Well, I tried everything in that article and when all my albums are in cover flow view multiple albums covers show for that one album. When I type in the album name, it narrows down to 1 CD.
    As far as not being able to retrieve album artwork, I just do a google image search. After I have saved the pictures I go to the info for any song in that album and add it to artwork.

  • How to edit multiple regions in one Piano Roll window

    I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
    I can see midi contents of all selected regions in Piano Roll at the same time.
    1) But how to choose certain one region of many selected to edit it?
    2) And how to edit all at once?
    Hope the questions are clear enough.
    Thanks.
    Dmitriy.
    iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
    OS X 10.10.2

    First of all, the Piano Roll has two mechansim, of what it is displaying.
    Selected Track: This displays all the Regions that you select in the Tracks Window
    One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
    Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
    You can also apply edits directly to the selected Regions in the Tracks Window.
    I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
    One thing to be clear about:
    Tracks Window: Any edit is applied to the selected Regions
    Piano Roll Editor: Ay edit is applied to the selected Events
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • HT1386 Synching multiple iPhones on one computer

    How do I synch multiple iphones on one computer. Last time I tried, I wiped out the contacts on one of the phones, so I want to be sure not to do this again. I don't want to wipe out any data on either of the phones (contacts, music, etc). I also am not sure what iphone I have, I've looked in settings and can't find it anywhere. Thanks!

    I understand that. What is the purpose of synching then?  Maybe I should have said I want to share music between the devices, but that is all. And I don't want to wipe out any of the music on one of the phones, which is what happened last time I tried to synch.

  • Can you sort multiple albums into one single album....?

    So my situation is like this...
    I have multiple albums from one specific Band (in this case its music from Shin Megami Persona.) I have all 8 albums sorted separately in Itunes. When it is sync'd to my Iphone it will show all of them in order which is typical. What I am curious about is if I can put the Albums into one Album name and when I click it, it will then show the 8 albums. Basically, this is for the sake of not having a lengthy album list on the iphone.
    If my question/explanation was unclear, maybe this might help.
    My current Album list looks like this:
    Albums- P
    Paramore
    Persona Reincarnation
    Persona 3 OST
    Persona 4 OST
    Persona 3 FES OST
    Persona 3 Portable OST
    Persona Music Live 2008
    Persona Music Live 2009
    Persona Music Live Band
    Pink Floyd Greatest Hits
    ect... ect...
    What I would like is for it to be like this:
    Album-P
    Paramore
    Persona Sountracks <------ click on this
    Pinkfloyd Greatest Hits
    ect...ect...
    Clicking leads to below
    Persona Soundtracks:
    Persona Reincarnation
    Persona 3 OST
    Persona 4 OST
    Persona 3 FES OST
    Persona 3 Portable OST
    Persona Music Live 2008
    Persona Music Live 2009
    Persona Music Live Band
    I've been able group them all together by changing them all to the same album name but it just leads to a extremely lengthy list of songs. So if there is anyway to sort by the way I explained above, I am open for suggestions. Thanks!!!1!1!1!1

    Thanks. That was very easy and works perfectly. Do you know if I can get my 08 edited footage back into 06 for some additional editing without exporting as a Quicktime movie that I can't edit? I want to add audio tracks that I can edit in synch with my video footage like I can in 06. Thanks!

  • Scanning multiple pages into one document with an automatic document feeder

    when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
    Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
    Is there any other all in one device that can perform this function in a Mac environment?
    Please advise.

    Hi @FentyFly ,
    I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
    From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
    Here is a URL for how to scan and change the settings. Just select your operating system.
    Scan.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I wanted to display the multiple rows in one row but column should be diff

    Hi
    Could any body help me regarding this query how to write to get the multiple rows in one row.
    eg.
    i have one table tab1(eno number,ename varchar2,uid1 varchar2,uid2 varchar2,uid3 varchar4)
    but when i am runing the query I am getting multiple record against one eno number because of uid1,uid2,uid3
    suppose value of table is
    eno ename uid1 uid2 uid3
    1 a u1
    1 a u2
    1 a u3
    when i am quering it is coming same as above but I want in one row
    eno ename uid1 uid2 uid3
    1 a u1 u2 u3
    can any onle help me how to write the query for this requirement.
    thanks
    saif

    which is hard coded in my code? Here another approach, but fail for c as there is no information for the value of a column: does 1 in u1 means col 1, etc.
    /* Formatted on 2012/05/29 16:29 (Formatter Plus v4.8.8) */
    WITH t AS
         (SELECT 1 col1, 'a' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'a' col2, 'u2' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'a' col2, 'u3' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u3' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u2' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'c' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'c' col2, 'u3' col3
            FROM DUAL)
    SELECT   xx.col1, xx.col2, MAX (DECODE (xx.rn, 1, col3)) AS uid1, MAX (DECODE (xx.rn, 2, col3)) AS uid2,
             MAX (DECODE (xx.rn, 3, col3)) AS uid3
        FROM (SELECT t.col1, t.col2, t.col3, ROW_NUMBER () OVER (PARTITION BY col1, col2 ORDER BY col3) rn
                FROM t) xx
    GROUP BY col1, col2;output:
    COL1     COL2     UID1     UID2     UID3
    1     a     u1     u2     u3
    1     b     u1     u2     u3
    1     c     u1     u3
    Edited by: ʃʃp on May 29, 2012 2:30 AM

  • Household with one Mac, Multiple iOS Devices

    So, We have One iMac 10.7.3, iTunes 10.5.3.; or rather we are buying our First iMac. Our iphones' have not been synched, No iCloud yet, etc. All info is on our iPhones, Pictures, Contacts, etc. Obviously there is information unique to each iPhone How does my wife sync her iPhone with her new i iTunes Library, Once she sets it up with iTunes. Since after booting up Virgin iMac the iTunes Library will be be empty. Could this cause the Empty iTunes Library to delete Songs, etc from the iphones.
    Instead of having Multiple user Accounts, ie Home Folder; is it possible to have Multiple iTunes Accounts and Libraries?
    I am sure this has been discussed before, etc. Just unable to find the correct info. Procedures and advice is greatly appreciated

    If you sync to a blank computer, then the iphones will be erased.
    Copy everything from the old computer(s) to the new one.
    As far as syncing multiple iphone to one computer:
    How to use multiple iPods, iPads, or iPhones with one computer

  • How to synch multiple ios devices without making multiple copies on Mac

    I keep most content on Mac Mini.  Prior to Christmas, we were using about 200 GB of the 750 GB hard drive on the Mac Mini.
    At Christmas, we added 5 iPads for the family.  We synch each iPad to a shared iTunes library on the Mac Mini.  Suddenly, the entire 750 GB of hard drive on the Mac Mini is FULL.  I strongly suspect that the reason is that when we synch (or backup) all 5 iPads, multiple copies of the exact same content (mostly movies) are getting created on the Mac Mini.
    How do I configure the Mac Mini, iPads, or synch within iTunes to NOT make duplicate copies of content?  For example, if each IPad has movie "ABC" synched to it, we don't then want the Mac Mini to have 5 copies of movie "ABC".
    Thank you.

    Yes.  The serial parameters cluster that contains the slave address is something you will just programmatically change as needed as opposed to using a front panel control.
    By the way, you don't need to have 30 copies of the index array.  Create one copy.  Expand the bottom downwards.  It looks like you start at #16, so just wire a 16 at the top, the ones below it will be successively 17, 18, 19.....  If you need to jump to another number, then just wire a constant in for that one.
    You also have some awkward datatype conversion to the dynamic datatype.  This is going to cause you problems somewhere down the line.  If you want an array from 3 scalars, just use Build Array!
    Attachments:
    ElectrexFemtoD4_LabVIEW_v4[1]_BD.png ‏202 KB

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • How to email multiple pictures in one email?

    While doing a search on this topic I found answers from 2007 that this was not possible. (That is almost the year when iPhone was released.) So what about now?
    PS. Let me give you a simple scenario. My friends and I went out last weekend. I want to send them, say, 10 photos from my iPhone. Some of them are on Androids so they can't use photo library sharing. I don't want to use social networking sites due to pictures being private. I thought that attaching those pictures to an email would be the easiest solution, but I can't seem to figure out how to send them all in one email. My only option is to send out 10 emails

    You can send multiple photos with one email.  what you do is open the camera roll and when all the thumbnails appear tap on edit then tap on the photos you want to send and then tap share.  I think there is a limit on the number you can do that way and it is about 5.  If you want to do more you can start your email then minimise the email app open camera roll, tap edit, tap the phot you want then tap share then tap copy, go back to your email app and paste and repeat the process until you have them all
    Message was edited by: Ocean20

  • How to scan multiple pages in one file

    I would like to know how to scan multiple pages into one file.  There is no add button that comes up.  I have a HP Officejet 8600 and a macbook pro.  Please help, this would really help me out.

    Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

  • How to subscribe the report into one excel multiple sheets in ssrs

    Hi Team,
    I have a requirement where i pull my report in one excel with multiple sheets,
    1.I have a Emp_Report where i could subscribe my report into excel format,but here i want to subscribe this into multiple sheets in one excel form.
    2.Is it possible to subscribe the two reports in one excel with mulitiple sheets.i need this also.
    please guide me hw we can achive me ,so that i can start working on that .
    am using sql server 2008R2 sql server edition.
    pls help me out for this

    Hi Ychinnari,
    According to your description, you want to perform subscription for one report or two reports into multiple sheets within a Excel file.
    In Reporting Services, when we add a page break within the report, those pages will be exported into separated sheets in Excel.
    For first requirement, subscribe one report into multiple sheets in one Excel file. We can add a page break within a group, then the report will display on multiple sheets when subscribe into Excel format.
    For second requirement, subscribe one report into multiple sheets in one Excel file. You can add one report as a subreport into the main report, then add pagebreak between main report and subreport.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Address Book - Create multiple contacts at one company?

    I am using Address Book v 4.0.4 and I want to be able to create multiple contacts at one company without having to reenter the Company, Tel. and Address information each time.
    Is there a way to duplicate an address, say the basic company address, to make the process of entering multiple people at one company any faster?
    Any tips would be appreciated. Thanks, Michel
    MBP Laptop & G5 Tower   Mac OS X (10.4.9)   Address Book v 4.0.4

    I talked to Apple today and here is how you create multiple contacts at one address, company etc. without having to reenter everything.
    1) In Address Book, highlight a contact in the name list
    2) Go to the Edit Menu & COPY
    3) Go back to the Edit Menu & PASTE
    4) Make changes to the new 'duplicated' contact
    Seems easy if you know how to do it.

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

Maybe you are looking for