Re-syncing Multiclip after editing?

Hi all,
I have just delivered a dvd to a customer of two angle video of a dance performance. While the first tapes of the performance appeared to be in sync throughout editing, the client, who choreographed all of the dances, noticed that the wide angle for the entire first half of the show (the first synced tapes) displays about four frames late.
I have re-synced a multiclip accordingly. Now I just need to find a way to transfer my old edits to the new multiclip.
Mind you that the audio and one of the angles' timecode has not changed. I have only moved the in point for the out-of-sync camera.
Is there some way to do this without re-editing the first half of the show? I am running Final Cut Pro 5.
Thanks in advance for any advice you can give.
Message was edited by: mattclearing

So I'm doing this (clicking find, typing in the source file name (Untitled5-1), clicking the find button) and nothing is selected (same when I click "find all").
I know that's the name of the file, I've found it in finder, opened it in quicktime to edit it separately, etc., so it's definitely the right file, the right name, etc.
Any idea why it won't select? I'd love to try this solution, but step 1 doesn't seem to be working out.
I'll be tracing my edits in the meantime. Thanks again for the help.

Similar Messages

How to sync two excel files, the content is the same in both files after edit.

I have two excel files, which are data and edit by multi users, how can I sync the master files to the copy files after edit?
Is this operation required VBA? marco?

Hi,
Your request could be done via VBA code. Here are two ideas.
One:
Syncing the data from master file to the copy file without opening copy file. Sample code
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim cnn As Object, SQL$, s$
Select Case True
Case Target.Value = ""
s = "null"
Case IsDate(Target.Value)
s = "#" & Target.Value & "#"
Case IsNumeric(Target.Value)
s = Target.Value
Case Else
s = "'" & Target.Value & "'"
End Select
Set cnn = CreateObject("ADODB.Connection")
cnn.Open "provider=microsoft.jet.oledb.4.0;extended properties='excel 8.0;hdr=no';data source=" & ThisWorkbook.Path & "\test folder\Book2.xls"
SQL = "update [Sheet1$" & Target.Address(0, 0) & ":" & Target.Address(0, 0) & "] set f1=" & s
cnn.Execute (SQL)
cnn.Close
Set cnn = Nothing
End Sub
Two:
Saving the master file as copy file before closing. Reference:
https://msdn.microsoft.com/en-us/library/office/ff194765.aspx?f=255&MSPPError=-2147217396
If you have any further question about coding, I recommend you post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Music on my iPhone has become very difficult to edit since upgrading to 5.0.1. If I simply want to delete some songs, it insists on a complete sync cycle after EACH one I delete. This is so annoying- (I have over 400 Christmas songs I won't need until n

Music on my iPhone has become very difficult to edit since upgrading to 5.0.1. If I simply want to delete some songs, it insists on a complete sync cycle after EACH one I delete. This is so annoying… (I have over 400 Christmas songs I won't need until next year) I have also noticed it randomly keeps updating album artwork…adding more time to each sync. Is there some way I can turn off the syncing until I have picked and deleted all the songs I want?

The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

Some files dont copy or sync to ipod after editing--.

some files dont copy or sync to ipod after editing , but when i again do some more editing or revert it back , it works normal

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance.

Itunes doesn't sync music after 3.1.2 upgrade

Hi,
i have a strange issue. after upgrading my iphone 2g to 3.1.2 iTunes doens't sync all music, even i tried to mark perticuler play list but it doent seems to sync any music or video, once i click on sync button after few secs it says sync completed and nothing is transfered to my iphone!!
also all apps are working fine and everything is restored from previous backup except the music and video only !!!
please help ....
Message was edited by: avithalani

I got the solution, it was not problem with iphone but with itunes library... some virus crapped the itunes library on my physical drive ... cleaned the virus re organized library and it works fine....

After editing photos in iPhoto

There are some photos that I have edited and would like to have them remain permanently in their edited format. After editing photos I open iTunes to update (sync) my photos onto my iPhone and iPod, however the photos that I edited remain in the original condition on my iPhone and iPod. Is there any way to have the edited photos synced in the edited condition when syncing my photos to my iPhone & iPod?

Welcome to the Apple Discussions. Here's how to use PSE correctly with iPhoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

Is server or service reboot required after editing registry in 13568 event

Is server or service reboot required after editing registry in 13568 event .

Hi Below is the event log guiding me to edit registry in order to resolve replication issue, In this case i cant restart the server or even service.I just want to know will this registry edit take effect with out reboot server or service.
Event Type: Error
Event Source: NtFrs
Event Category: None
Event ID: 13568
Description:
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Nokia suite wont sync messages after phone update

Nokia suite recommended me to upgrade my Nokia C2-01 phone, and after this was done it no longer sync new messages to the Nokia Suite application. I am disabled and purchased a Nokia phone just to be able reading my messages in my computer (since I can’t hold the phone in my hands) so this is now downright chaotic for me!
The pop-up box at the bottom right of Windows still announce when a new messages/SMS is received, but they never appear in the Nokia suite after the upgrade.
Edit: Just discovered some messages sent by friends are synced, but not all SMS I receive.

Check whether the latest Beta version of Nokia Suite makes any difference. You may download it from here . For downloading the installer, you need to log-in using the SAME credentials that you use on this Forum ...
...also, have you set Auto Sync in the Nokia Suite ? If so, try manual sync ..after connecting the phone to PC, in Nokia Suite -->Messaging .. click on SYNC at the bottom next to the phone icon and see if it works ...

I'm doing a simple edit and after editing clips for a while I am dropping sound. Why is the sound dropping out?

I'm doing a simple edit. The clips audio is fine when previewed or when in the time line. However, after editing for a while the audio is now dropping out. I have moments when just a frame or two drop our or even several seconds. What can I do to fix this without having to start over again? Thanks.

Thanks for the info.
To my third question, how are you exporting? For example, if you selected Export Media before you added the third party effects, I would expect that the export went pretty quickly. If that is what you did, open that file in QuickTime and hit command i to show the format of your exported movie.
Or perhaps your Share workflow was "send to Compressor"?
I don't have any experience Digital Hotcakes products. When you say "it worked" with the reception video, do you mean the same DHB effects you used in the multicam project? Was the reception video the same format as your multiclip?
Russ

Can't save pictures on original folder position after edit...since I'm upgraded to IOS7 on IPad2.

can't save pictures on original folder position after edit, get save popup to save at different position, also still on toubles to get them back to original folder positon since I'm upgraded to IOS7 on IPad2.

I say the problem is probably noted, and probably will be resolved. Not that i can speak for Apple. I find the "problems" of wallpaper to be pretty minor compared to the advantages of iOS 7. The fun of wallpaper has always been pretty insignificant here.

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

Problem with Outlook Sync/Calendar after upgrade to 10.2

I have come up with a number of issues which may all be related.
The core seems to be around the way that my Calendar and contacts are now configured.
Firstly - I use BBLink to Sync. After the upgrade my 1.1.1 version of BBlink wouldn't sync to Outlook. Its there in BBlink, but greyed out. I updated the BBLink to the latest version. Same problem; there but greyed out.
Next issue is that I created a new calendar event on the Z10. This all went well until I went to add a person - it asks me to associate an email account to send the notification. If I do this it gives me Local Calendar and which I set to one of my email accounts. Then It displays the name of the computer I sync with.no matter what I do (none, or an email address) it wont accept either giving me an are you sure message and reassigning if I use the same email address OR if I select none it just doesn't do anything and whe I go to save it goes through the same process again.
If I look under setting>accounts I see BBLink is the source of my Calendar and Events (correct).
HELP!

Hi sreffold
Try updating the BlackBerry version Link to v1.2.0.28 PC o Mac
With this new version you can make the contact and calendar synchronization. The version 1.1 does not allow the synchronization.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

In iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

in iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

It's rather more complicated that this.
iPhoto is a lossless editor. You don't lose any quality on your shot in iPhoto.
The file size you see reported is the size of your iPhoto Preview: this is what gets used if you access the data via a media browser. It's a "good-enough-for-most-uses" version of the shot. Email it, upload to websites, use it in Presentation, Word processing file etc
If you want to set the quality yourself then Export the photo using the File -> Export command.
You can choose to export to Jpeg, Tiff or png. Tiff is lossless but the file sizes are up to 10 times larger. Jpeg allows you to choose different qualities: High, Medium or low. The difference is the amount of compression involved. High quality means very little compression. It's not unusual for photos exported at this setting to have a larger file size than the original.
Which setting you choose depends on the use you intend. Further editing, printing then high is important. Sending to Facebook? Well low will do just fine there as they're going to trash the file anyway.
But the key point: the file size only becomes an issue when you export.
Regards
TD

Error in saving .aspx pages after editing the XSLT

Hi,
I am developing a SharePoint 2010 web app and I had to do some modifications for a .aspx page which has a data form web part and I am encountering following issues:
1. After selecting the web part, when trying to modify the filter criteria of the data source, the "group" and "ungroup" buttons are seen as disabled and the option of editing in the XSLT editor is also not visible.
2. after editing the XSLT, knowing that there are no issues if I try to save it an is showed saying null value issue and asking whether to allow scripts to run in this page r not. After choosing either yes or no, when I try to preview it in browser I get
an error in the place where I have the data form web part saying error with web part try to edit it in SharePoint editor such as SharePoint designer.
3. this is happening only i try to edit the code but no matter how many copies I get from the original page, they are correctly previewed in the browser unless I try to edit it.
your kind support or suggestions are highly appreciated as I am unable to fix this
thanks.

Data you are changing is on the frontend. You need to pass data to backend (server). The static method 'dispatch' of control framework class (CL_GUI_CFW) is used to do this 'manual' synchronization. It is sort of helper method of control framework (which is basis for ALV controls) and is independent of ALV controls (cl_gui_alv_grid etc.) that are used.
Try putting this code as suggested and check.
short code would be (without error handling)
CL_GUI_CFW=>DISPATCH( ).
null

Re-syncing Multiclip after editing?

Similar Messages

Maybe you are looking for