Re: Tecra S10 and S11 freeze randomly

We have several Tecra S10's and S11's. They freeze randomly during the day. Some even twice within half an hour, others spread it out through the day.
The Tecra's are all Windows 7. Some have 64 bit, others a 32 bit installation. After the Windows 7 installation we removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc), Ebay, etc. After that we activatie Office 2007 and we Microsoft-update the the laptops. So far so good.
However, after a week or two just simply working in Word causes the Tecra to freeze. Even ctrl+alt+del is not working. The Tecra has to be forced to shut off by holding the power button down.
Does anybody recognize these 'frozen moments'. It's very anoying.

> All notebooks are in an Active Directory domain Windows 2008.
Thats the reason why I asked if notebooks are connected to some company LAN.
I saw somewhere on this forum that similar issues were noticed in the same situation. Notebook was somehow blocked when was part of domain.
Probably some data exchange between notebook and server was responsible for this blocking and freezing issue.
I really don't know what to say. If you have several notebooks with the same problem I recommend you to contact nearest authorized Toshiba service provider and ask for help. You know they have contact with Toshiba people and if there is something serious they can help you with this.
I really don't believe some long discussion here will help you much.
If your local administrator cannot find out what the problem can be than you need professional help.
Do you agree with me?

Similar Messages

  • Keyboard and mouse freeze randomly

    My keyboard and mouse freeze up for 2-4 seconds at seemingly random intervals.  I could go for a couple hours without it happening, or like now, it has happened twice while writing this.  If I'm typing something when it freezes, nothing I type while it's frozen ends up showing up, but if I had hit a key right when it froze, it will repeat itself until I press something else after it unfreezes.  They keyboard and mouse both freeze at the same time, it's not one or the other.  It has nothing to do with standby like the topic below...it can happen right after I boot up or anytime thereafter.
    My hardware is an eMachines M6805 laptop (upgraded to 2GB of RAM) and just a basic Dell USB mouse and keyboard.
    I tried searching the forums, but the search box on here searches the entire web for some reason even if I tell it to search TechNet, so I apologize if this has already been answered.

    I just had my Desktop freeze whilst I was using Media Player minimised to the taskbar.
    I came back to my PC and couldn't use the keyboard or mouse. I plugged in a wired USB mouse and this did not work either. I then used the mouse and keyboard buttons on my MCE remote and still nothing happened, actually something happened as my hard drive
    became very busy, but there was nothing happening on screen. I had to reboot to get back to normal operation.
    I use a Logitech Bluetooth MX500 keyboard and mouse and have been having problems since I had Windows 7, but thought it was the keyboard and mouse at fault. This is the first time that I have encountered this problem, but I have had problems with the keys
    sticking, very annoying when you're in Visual Studio and it goes and deletes a load of code for you because the backspace key was the one that stuck. The cursor also randomly jumps lines occasionally and inserts text where I don't want it. This wouldn't be
    such an issue if I was a touch typist and could look at the screen whilst typing, but I am not and only realise the errors when I have finished typing.
    Anyway, Mine is a custom built PC(all drivers and windows fully up to date) which ran XP with zero problems:
        Gigabyte mboard and graphics card (Nvidia) with I5 processor and 4GB ram.
    If this was a USB hub Powersave issue, then I would still expect the hub to wake up when a new device was pugged in, so I'm going to count that fix out.
    I'm not sure that the freezing was a mouse/keyboard fault, I suspect that this is more a video driver fault as the computer did become very busy doing something when I used the MCE remote, it's just the screen didn't update to show what it was doing.
    I should have looked at the taskbar clock to see if the time had updated, I'll do that next time if it happens again.
    I've disabled the Power Save options for the hub that controls the mouse and keyboard, perhaps this will stop the keys sticking and jumping around when I'm typing in Visual Studio.
    Mick Doherty
    http://dotnetrix.co.uk
    http://glassui.codeplex.com

  • Flash and Silverlight freezing randomly

    I have been facing this problem ever since I upgraded to Firefox 7. There doesn't seem to be a pattern as to when it happens, but periodically, when a new instance of Adobe Flash or Silverlight are started, they crash. For example, every 3-5 times watching something on Youtube, watching something on Netflix, or even just the annoying flash ads in Yahoo mail. When this happens, sometimes it grays out the control and offers to send a crash report (which I do almost every time), and sometimes I have to manually kill firefox via task manager. Also, when starting a Netflix movie, it might load a little bit (status bar isn't at any particular location, could be anywhere between 0-100%) but then halts. In any of these occasions, Firefox completely freezes. I do in fact have Flash and everything up to date. Problem has been around for months now and it keeps getting more and more annoying.
    I am more than familiar with computers, developer in fact. I do also have Visual Studio 2010 installed, in case that might contribute to the problem.

    Silverlight is not required in Firefox. However Flash works on Mozilla Firefox. Update your Firefox Plug-ins by going here
    https://www.mozilla.com/en-US/plugincheck/
    Update the Plug-ins infront of whom "Update" button is active. Check and tell if its working.

  • Tecra S10 - Change graphic card

    Hi,
    I hava a Tecra S10 and it is a good computer. The only thing i would like to change is the graphic card. I have a Nvidia Quadro NVS 150M and I would like to know if it is possible to change it for another one. I would like to have a better gaming experiance.
    Have a nice day,
    Thank you

    Hello
    I think this article is the right one for you
    http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  • Keyboard and trackpad freeze and randomly become unresponsive

    I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
    Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
    What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
    The clock keeps ticking.
    If music were playing it would continue etc.
    Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
    Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
    .. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
    I've made no progress in finding out what could possibly be the cause of this. A few observations:
    It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
    It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
    It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
    It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
    I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
    Possibly related (although I haven't found anything in these threads):
    Keyboard causes trackpad to not function properly
    Keyboard and trackpack freeze
    Keyboard and Trackpad Unresponsive
    MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
    MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
    I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
    Sample log from when it happened. It last happened at 21:04:xx:
    Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
    Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
    Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:30:43 --- last message repeated 1 time ---
    Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
    Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
    Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
    Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
    Jan 14 20:43:14 --- last message repeated 10 times ---
    Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
    Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
    Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
    Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
    Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
    Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
    Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
    Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

    I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

  • I've been using Firefox for quite a long time now and recently it has started giving some problems. It freezes randomly and doesn't respond to any clicks.

    I am a proud user of Firefox. I started experiencing the freezing problem since i updated to Firefox 18 and now I am facing the same problem with Firefox 19. Firefox does not respond to any of my clicks and then I have to close it using Task Manager. This is happening frequently and randomly. It does not freeze on a particular site or anything else. It just freezes randomly. Please do reply if anyone has a solution to this problem.

    see this:
    [[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

  • My iPod keeps shutting down and restarting and it keeps on freezing randomly. what do I do?

    Hi,
    My iPod Touch 4g keeps shutting down randomly, it also keeps restarting randomly and freezing randomly. Even whilst i'm listening to music, it'll just stop and nothing I do can sort it out except for restarting it by pressing the Home button and the Sleep/Wake button together. Can you guys help?

    It depends upon your situation. Apple with exchange the iPod for this price:
    Apple - Support - iPod - Repair pricing
    You have to deceid if it is worth it.

  • Dual 2 GHz PowerPC G5 beachballing and then freezing at random intervals

    My computer at work has been beachballing and then freezing at random intervals for the past week or so.
    What happens is that all processes stop. The cursor is still responsive for a while, and then the application I'm in, regardless of what it is, “beachballs.”
    Occasionally I'm able to wait it out and the computer becomes usable again and other times it just freezes. Then I can't force quit so I have to do a hard power cycle and then start up again. This happens every day, at least 4 times a day.
    I've been keeping the system.log open to look for any tell-tale issues and noticed that during every crash I get the following information:
    3 kernel[0] disk)s3: data underrun
    3 kernel[0]
    and it repeats until the computer becomes responsive again or I decide to do a hard power cycle.
    In addition, I checked the System Profiler diagnostics area and found this:
     Last Run:    11/8/10 1:05 PM
      Result:    Failed
      Failure type:    Memory
      Memory slots:    DIMM6/J43, DIMM7/J44
    So…I switched out the offending bars and switched them for 1 GB bars and this problem was solved.
    The diagnostics result for the Power On Self-Test:
    Last Run: 11/10/10 6:21 PM
    Result: Passed
    However…I'm still experiencing beachballing and freezing problems with the same severity and frequency.
    Help!

    gridout1959 wrote:
    So, to clarify: do you suggest I use Disk Utility first to see if any problems are uncovered? Or should I use TechTool Deluxe instead and test the RAM with Memtest?
    My two cents would be use Disk Utility first. If you don't have the install disk handy, you can do the same thing with single-user mode. See this link for details: http://support.apple.com/kb/TS1417
    You have to run it from single user mode (start with command-S keys held down until you get a Unix terminal screen.
    You can also run memtest from single-user mode, though I do not remember the command syntax offhand. Looking at an AppleJack log, though, I see the following command line entry that was used to run memtest on a three-pass check
    */usr/local/sbin/memtest all 3 -L*
    Running memtest from single-user mode tests more of the RAM because little is occupied by the BSD kernel.
    A snip of the terminal output running memtest:
    Test sequence 1 of 3:
    Stuck Address : ok
    Random Value : ok
    Compare XOR : ok
    Compare SUB : ok
    Compare MUL : ok
    Compare DIV : ok
    Compare OR : ok
    Compare AND : ok
    Sequential Increment: ok
    Solid Bits : ok
    Block Sequential : ok
    Checkerboard : ok
    Bit Spread : ok
    Bit Flip : ok
    Walking Ones : ok
    Walking Zeroes : ok
    Somewhat thorough, though no test is completely bulletproof.

  • Tecra S10 - 123 and Linux Mandriva Boot Problem

    I have a Tecra S10 - 123 since two months and wanted to install Mandriva on it (I do not have any experience with Linux...). I did burn the .iso Image to the Cd and changed the bios settings to boot from cd. That works without problems, but Mandriva stops to boot from the Live Cd after the Kernel has loaded.
    What can I do?

    I'm not sure what kernel Mandriva has in it's Live CD. If it runs a kernel that doesn't have AHCI compatibility built-in, it will fail for sure. In this case all what you have to do is to set "Compatibility" setting for your HDD in BIOS, to drop the SATA support. Other ways, just contact Mandriva support team and see what they can recommend you. And by the way, ask around what file systems are supported, so you won't have the same problem after installing.

  • Since updating to ios7 my ipad freezes, randomly zooms in and out, black pages that take forever to load and battery charge doesn't last very long. It's very frustrating, is there anything I can do

    Since updating to ios7 my ipad freezes, randomly zooms in and out, black pages that take forever to load and battery charge doesn't last very long. It's very frustrating, is there anything I can do it seems to have a mind of its own

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Tecra S10 - CAD and 3D software compatibility

    Hello
    It seem that the graphics card in my Tecra S10-A11 is having problems with software like Autocad 2009 or Rhinoceros 4. The card is a nVidia quatro NVS 150M . Cursors in these programs are blinking or slow. Is there any known solutiun to this problem, because I found a lot of similiar problems on different forums ,but I found no solution.
    I would have never thought that a notebook of this category could had such problems. But if the GPU is really unable to handle these programs on a good level than I feel really dissapointed.

    In your case I would first update the graphic driver.
    You can find an update on the Toshiba website and also BIOS updates:
    http://eu.computers.toshiba-europe.com
    And make sure that these programs support your graphic card.

  • My firefox Freezes randomly! I'll be working on the website for 2, 5 or 15 minutes. Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why does this keep happening?

    My firefox Freezes randomly! I'll be working on the website for 15 minutes, (google places, yahoo mail). Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why doesn't this keep happening?
    My firefox at home, (version 3) does not have this happen! I'm afraid of upgrading to version 3 because of all these problems. I use FireFox for work so i really need it and I'm wasting crucial time restarting websites and updating my websites/blog/business listings from scratch. not right!
    I also notice it happens a lot to Harley Davidson website.

    freezing at regular intervals:
    :http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    : https://addons.mozilla.org/firefox/addon/places-maintenance/
    :<br>Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions. (Firefox 8 --Nov 8, 2011-- should not have this particular problem).

  • 1 month Toshiba satellite A505 s6033 freezing randomly and blank screen on startup

    Hi,
    My Toshiba satellite A505 s6033 start freezing last night when I was surfing the internet. After pressing 5 seconds or more the power button the computer turned off.  After that I start it back on but all the lights on body worked except the display.
    After few more attempts I pushed arrow down and the power button the display turned on, but the freezing problem is back. So I thought that is a windows problem and I used the recovery partition to restore the state out of the box state. But the display is randomly blank when I push the start button except the other lights, and after restoring the laptop still freezing randomly in or during the windows is loading.
    When I turn it on in safe mode, it works perfectly fine. When I turn it on normally, it freezes almost right away.
    I bought this computer from bestbuy, but I am an Romanian citizen (sorry for my English), my question is : I can use the International Limited Warranty in my country ? Or what should I do to fix my laptop.
    Kind regard,
    Valentin

    First, sorry because of my English, it is not my language and it's been a while since I had to used it.
    This is happening to me, when I bought the laptop I had a few times that it froze but I thought it was something I did, and it happened once or twice in 3 months, for 9 months, maybe 4 times in the last month, it began to increase.
    Then I thought it could be the temperature, and after a while, 2 months, I didn't had time, I bought a external cooler, but it didn't work... By this time my warranty expired... And thinking it could be dirt, I opened the back, but just by removing it I saw it was clean and put it back, I did nothing but opening... And again started looking for what it could be... Yes, I tried looking here, but I didn't find this topic that time, and now that I don't have the warranty I found it...
    Any one here could help me? What should I do? Is there any way to fix it without buying a new video card? 
    I live in Brazil so its difficult for me to buy parts, I bought the laptop in the states when there, here the hardware are expensive... But if I have, I'll buy... If I have to buy a new one, could you tell me if there is a new one that I can buy that has little difference in price for the one I have and it's better?
    PS: Toshiba from Brazil didn't helped me, I just spoke with then...
    I thank you for any help!!

  • Macbook pro freezes randomly (spinning wheel of death)

    I just got a macbook pro refresh and the thing randomly freezes without warning. Once it's locked up the wheel just spins, I can't access Activity Monitor, can't do anything. I think it's a pretty good computer but, aside from freezing and basically totally breaking randomly. What's up with this? Do the people at Mac not test equipment before selling it to their users. If you google "mac freezes" you get tons of hits, but none of them seem to have the solution. Any help? Thanks!

    Apr 5 13:16:34 undevice Goopy[165]: end composition.
    Apr 5 13:16:34 undevice Goopy[165]: update ui
    Apr 5 13:16:34 undevice /System/Library/CoreServices/Menu Extras/TextInput.menu/Contents/SharedSupport/TISwitcher.app/Contents/MacOS/TISw itcher[187]: CPSGetCurrentProcess(): This call is deprecated and should not be called anymore.
    Apr 5 13:16:34 undevice Goopy[165]: process it in Engine
    Apr 5 13:16:34 undevice Goopy[165]: process in EngineAdaptor
    Apr 5 13:16:34 undevice Goopy[165]: convert result is gmail.com and len is 9
    Apr 5 13:16:34 undevice Goopy[165]: start update ui
    Apr 5 13:16:34 undevice Goopy[165]: start g candidates
    Apr 5 13:16:34 undevice Goopy[165]: start g composition
    Apr 5 13:16:34 undevice Goopy[165]: start create composition
    Apr 5 13:16:34 undevice Goopy[165]: generate compelete
    Apr 5 13:16:34 undevice Goopy[165]: end composition.
    Apr 5 13:16:34 undevice Goopy[165]: dealloc
    Apr 5 13:16:48 undevice Google Chrome Helper[209]: unknown error code: invalid numerical value
    Apr 5 13:16:48 undevice Google Chrome Helper[209]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Apr 5 13:16:48 undevice [0x0-0x10010].com.google.Chrome[198]: Tue Apr 5 13:16:48 undevice.local Google Chrome Helper[209] <Error>: unknown error code: invalid numerical value
    Apr 5 13:16:48 undevice [0x0-0x10010].com.google.Chrome[198]: Tue Apr 5 13:16:48 undevice.local Google Chrome Helper[209] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Apr 5 13:17:20 undevice Goopy[165]: process it in Engine
    Apr 5 13:17:20 undevice Goopy[165]: process in EngineAdaptor
    Apr 5 13:17:20 undevice Goopy[165]: should NOT process
    Apr 5 13:17:20: --- last message repeated 2 times ---
    Apr 5 13:17:20 undevice Goopy[165]: start update ui
    Apr 5 13:17:20 undevice Goopy[165]: start g candidates
    Apr 5 13:17:20 undevice Goopy[165]: start g composition
    Apr 5 13:17:20 undevice Goopy[165]: start create composition
    Apr 5 13:17:20 undevice Goopy[165]: generate compelete
    Apr 5 13:17:20 undevice Goopy[165]: end composition.
    Apr 5 13:20:00 undevice [0x0-0x10010].com.google.Chrome[198]: [198:24323:253806611897:ERROR:backend_impl.cc(1092)] Critical error found -8
    Apr 5 13:20:03 undevice [0x0-0x10010].com.google.Chrome[198]: Handling SIGTERM in renderer.
    Apr 5 13:20:03 undevice [0x0-0x10010].com.google.Chrome[198]: Wrote signal to shutdown pipe.
    Apr 5 13:25:31 undevice login[252]: USER_PROCESS: 252 ttys000
    Apr 5 13:26:25 undevice /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[189]: No valid tickets, timing out
    Apr 5 13:26:47 undevice [0x0-0x10010].com.google.Chrome[198]: 2011-04-05 13:26:47.502 Google Chrome Helper[232:107] __CFServiceControllerBeginPBSLoadForLocalizations received error 1100 from bootstraplookup2
    Apr 5 13:27:45 undevice [0x0-0x10010].com.google.Chrome[198]: Handling SIGTERM in renderer.
    Apr 5 13:27:45 undevice [0x0-0x10010].com.google.Chrome[198]: Wrote signal to shutdown pipe.
    Apr 5 13:29:22 undevice com.apple.usbmuxd[21]: HandleUSBMuxDictionary client 0x101b00010-Xcode/com.apple.Xcode using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21

  • Help! Intermittent Keyboard and Trackpad freeze/unresponsive

    Hi everyone
    I'm pretty new to macs, and got my first one a few weeks ago - 2.4GHz White MB latest model. It has worked well in the first week, but I've experienced some problems with the keyboard and trackpad. At home I usually use a bluetooth keyboard and mouse and they work fine. I usually leave the MB on at night as well. Sometimes when I try use the keyboard and trackpad, it is completely unresponsive. I've also experienced this at uni as well, where it just suddenly freezes. I can only control it with my bluetooth mouse (at uni) and both bluetooth keyboard and mouse at home. This problem used to happen after waking up from sleep as well, where I would open the lid and the keyboard + trackpad is unresponsive. Sometimes when I'm in class and it freezes, I have to hold the power button down and do a power off and on.
    The last time it happened was this morning. My mouse could still function, so I did a normal restart and it just hanged, and the swirly circle icon (not the multi colored ball) just kept spinning. Had to hold the power button down to shut it down and restarted it again.
    Problem is, it seems to be an intermittent problem. I can't seem to reproduce it, so how can I take it to my local shop to get it checked out if i can't show them this problem?
    What do you all recommend?? I really can't afford this to keep happening at random times.
    Also have another complaint with the battery not being flat against the case. It seems to bulge out a bit. I called Apple a couple of weeks ago and they told me to take it to my local reseller where I bought it from (NextByte). I went there and they told me I had to drop it off to them, and it would take 3-5 days for them to take a look, and maybe even longer if they had to get it fixed. I can't afford to be crippled for so many days without my MB as all my uni notes are on it.
    Please let me know what I should do. Thanks!

    Also forgot to mention if I use my bluetooth mouse to turn bluetooth off from the menu, it comes up with a message:
    You cannot control your computer if you turn Bluetooth off at this time as you would lose your input devices.
    Please let me know what I can do. Thanks!

Maybe you are looking for

  • Link between OM and PA

    Dear Friends, Hi, Can any one give me the solution to update the PA info type 0001 personnel area and sub area based on the changes on PPOME account assignment info type, The situation that HR department update the personnel area and subarea in PPOME

  • Dynamic VLAN assignment issue with ACS & WLC

    I have configured an ACS (v4.2) & a WLC 4402 (5.2.193.0) according to the document listed at: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml When I attempt to authenticate a user in the ACS local

  • Help with configuring security policy

    Hi guys, I've got two questions, in the same vein around SCEP and SCCM policies (2012 R2). After looking a bit within the console and some searching around, I don't see anything glaringly obvious to address the following questions, though its possibl

  • What are these pre-installed Lenovo programs?

    Where can I find info on what all the programs are that are pre-installed with a new Lenovo?  And how can I uninstall them, if I want to completely get rid of them? Thinkvantage (there are like 15 Thinkvantage programs)!!! Agilix GoBinder PC Doctor f

  • ISE License

    Dear Team, Please help me for the below mentioned ISE deployment I want to deploy ISE in a DC & DR environmental. There are two WAN links used for both location at a time e.g.  1.  A (DC)    & B (DR)   if either of the link down then traffic will be