Re: Third Party Handler via Visual Basic

Neil
I have done a port of the C++ to VB using tweakVB email me if you are
interested:
[email protected]
Regards,
Andrew
"Neil Stansbury" <[email protected]> wrote in message
news:zdBcb.1800$%[email protected]..
> Thanks Glade,
>
> I found a utility called TweakVB that allows a VB DLL to export functions
> to the correct ordinals, but I'm not sure I even want to try and convert
> the C++ include files and typedefs!!
>
> BTW. The GWToken Docs says:
>
> <quote gwtokens.pdf page 28>
> Visual Basic and other programming languages that can create Win32 DLLs,
> can be used to create TPH DLLs.
> </quote>
>
> Cheers,
>
> Neil
>
> Glade Monson wrote:
>
>> Neil,
>>
>> Sorry - but I don't know for sure if it is possible to create a VB TPH or
>> not. I know that I have never seen one, or heard of anyone who has
>> successfully written one.
>>
>> Glade,
>> Novell Developer Services
>>
>

Andrew Maxin wrote:
> Neil
>
> I have done a port of the C++ to VB using tweakVB email me if you are
> interested:
>
> [email protected]
>
> Regards,
>
> Andrew
>
>
> "Neil Stansbury" <[email protected]> wrote in message
> news:zdBcb.1800$%[email protected]..
>
>> Thanks Glade,
>>
>> I found a utility called TweakVB that allows a VB DLL to export functions
>> to the correct ordinals, but I'm not sure I even want to try and convert
>> the C++ include files and typedefs!!
>>
>> BTW. The GWToken Docs says:
>>
>> <quote gwtokens.pdf page 28>
>> Visual Basic and other programming languages that can create Win32 DLLs,
>> can be used to create TPH DLLs.
>> </quote>
>>
>> Cheers,
>>
>> Neil
>>
>> Glade Monson wrote:
>>
>>
>>> Neil,
>>>
>>> Sorry - but I don't know for sure if it is possible to create a VB TPH or
>>> not. I know that I have never seen one, or heard of anyone who has
>>> successfully written one.
>>>
>>> Glade,
>>> Novell Developer Services
>>>
>>>
>>>
Andrew,
I'd be very interested in getting hold of this VB code and hopefully I
can use it as a wrapper for some C# I have.
Regards,
Ada
Identity Concepts
Mobile : +61 419 637 518
email : adam_j_bradley \at\ identityconcepts.com.au
irc: #nidm on freenode.net
Web : http://www.identityconcepts.com.au

Similar Messages

Modifying the init-params for third-party handler without redployment?

Hello,
I have a custom handler used for authentication as a third-party jar file. This handler has some of the init-params which are configured in web-services.xml deployment descriptor. Typically these init-params change from one test environment to another. So user can change these parameters, but for every change I would need to redploy the application in each environement.
Is it possible to change these init-params dynamically once application is deployed? I would like to change it after my EAR file containing webservice is deployed and before a webservice invocation is made by the client.
Any help/guidance will be much appriciated...
Thanks.

Duplicate post please do not respond to it. thanks.

Passing parameter to third party survey via Webex Event Destination URL

I am looking into using the end of event destination URL to route an Event attendee to a third party survey tool. Is it possible to pass WebEx environment variables (attendee email, event name, event start date, etc.) via URL parameters, so I don't need to ask the user the name and event attended in the survey?
Thanks, David!

Hi David,
I assume this is for WebEx SaaS (Cloud based) solution. Unfortunately, this community is for Cisco WebEx Meetings Server (on-prem solution) and is not observed by WebEx SaaS experts. You might be better of by calling into WebEx Support - 1.866.229.3239, provide them with your WebEx Site name and see if they can answer your question.
-Dejan

Need to Allow Certain Third-Party Applications via MDM

I just deployed a computer lab of iMacs and Minis and am using Yosemite/Server 4 to manage them. All computers are running 10.10.1
I Profile Manager>Restrictions, I want to allow users to use many native OS X applications but additionally I need to allow a handful of third-party applications to run.
In Restrictions>Apps I have the option to "Restrict which apps are allowed to launch" and then create an allow list but it only allows native apps to be added. There is the option to allow and disallow folders, but no indication of where (Users or Mac HD Level) or how (naming and file path) those folders should be configured.
Can anyone give me some resources or pointers here?
I will add that this is my first OS X server deployment. I am well versed in the AD environment as well as the OS X as operating system.

Negative. I want to allow users to open a specific list of applications--both native and third-party while disallowing others. For example: I want to be able to open Safari, Pages, Net Beans and Google Chrome but not Terminal, FaceTime, and Photo Booth.

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

Cannot send emails in Mac Mail using third party SMTP via BT Infinity Broadband

EUREKA!!
I have a Mac Book Pro and recently had my home broadband upgraded to BT Infinity. Prior to this upgrade sending emails via my Mac mail was working perfectly. Since the new installation I could no send any external emails using the Hotmail.co.uk or 123-Reg.co.uk smtp outgoing servers. Googlemail.com was ok.? very strange.
So when I connected the same macbook to other wireless connections it would work perfectly.???
So after many hours wasted messing around, I managed to get the right person at the right time via BT helpline in the UK not India. (India helpine just say "we are not trained in Apple".
So the very polite man from UK Helpline provided me with the solution.
GO TO > Apple Icon top left > System Preferences > Network > Wireless >
Select your wireless connection > Click Advanced lower right on popup
Select DNS tab
Click on the + under DNS left pane and type the following :- 208.67.222.222
Click Apply
BINGO!!!!
I hope this helps someone, as I know how painful these types of issues can be.
Cheers

Hi Haggie
Had a similar experience but couldn't work out why macbook was working and imac not. I hate verification with bt. Anyway, tried your method and as you say eureka! Did have imac plugged in before and put it on wifi to try your fix I will try plugging broadband back in to see if that works and will post back but at the moment just enjoying the moment!
Just to say a big thank you for not only sorting the problem out but equally importantly posting the answer! Too many people sort out their problems without letting other people know how!
Many thanks

What is third party handled in MM

want to know the SD involvement and the necessary steps in MM for tird party scenario?

create a pr or po with item category 3 party and also use the account assignment category for 3 party
and mention the sales order no. at item level
no wafter creating the po
vendor will send the delivery direct to the 3 party or to the customer of your company and then vendor will invoice u for the delivery has made to u r customer

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

Third party -- XI -- SRM Scenario,

Hi SRM experts,
We have a third party sending XML PO Request with external reference ID to XI, map it to SRM PO Request, and send to SRM. What we would want the SRM to do is to process the incoming request, generate a PO number, and send back an XML PO confirmation with the external reference ID and newly generated PO number.
In R/3, I know we have to set up partner profiles, ports, and message control to automate the creation and sedning of order response for an incoming order request. Are there equivalent configurations we can do in SRM? If yes, where can we do that? Basically I would like to create an output determination when a PO is created in SRM, so that the PO is sent to the third party application via XI.
Has anyone have any suggestion on this? or encountered similar scenario?
Your feedback is greatly appreciated.
Thanks
Karma

Hello Karma,
What is the "PO Request" ? Is it same scenarion with this ?
External system to SRM
Regards,
Masa

No Longer Possible to Access iCloud Mail on Third Party Mac

Something has changed recently. It is no longer possible to access iCloud mail on a third party mac via web browser
This afternoon, I tried to do so on my daughter's iMac - and the system wanted me to set up iCloud rather than letting me access Mail (or any other iCloud services for that matter) instead. Tried different browsers, change of login account on the computer. All to no avail. Have to set up iCloud on the computer. Which means either logging my daughter out, or creating a whole new identity for the purpose. This entirely defeats the notion of the simple webmail interface - and indeed makes Pages, Calendar, etc inaccessible unless on your own computer, or one that you have used to set up an iCloud account. Not something that you want to do in an internet cafe or an airport lounge.
Two sets of Chat Support sessions later, with the problem being hinted to be probably due to "my daughter's computer (!!???)", no satisfaction
I am now in the airport, trying to still access my iCloud mail through a web browser. Same nonsense about setting up iCloud before I can access my iCloud mail via the web through a browser.
Apple, this was one of the advantages of iCloud that I, as a regular traveller, have found useful in the past. Today I have wasted well over an hour on something that is clearly an error in the logic of how people will be using iCloud - possibly a "feature" of Mavericks?
Please bring back simple and straightforward access to iCloud mail via web browser, so that I can once again access my mail from any third party computer.
Thanks
Nic

Excellent, well done. I have to say that talktalk were useless, they repeatedly sent me instructions for setting up an emil account and did not seem able to understand that it was the login that would not work. Thank you.

Issue for creation date of Billing document in third party ???

Hello SAP Folks,
This issue is related to third party scenario. The basic requirement is to create to a billing document with a creation date same as
Good issue date of Sales Order.
For your information, with the help of enhacement we have passed on the value of posting date of material document generated
from MIGO to Goods issue date in Sales Order. I am very much aware that setting up a new copying routine would help me but
relating the GI date field of Sales Order from the techincal point of view is a complete work stopper. Could anyone throw light on
the workaround for mapping this case ???
Regards,
Sarthak

Hello,
Thanks Alex for your input on the topic !!
But i would like to say that the billing relevance of the item category has to "B" as this process of Third part Sales talks about creation of billing document after the MIGO. And i am basically interested to Populated the posting date of MIGO for Biling creation date.
In Sales Order, the GI date is modified to Posting date of MIGO through enhancement. I have been looking around relevant tables to fetch the GI date of Sales Order but not getting the right track...
Could anyone provide any other workaround to implement this sort of requirement ???
Eager to hear from Lakshmipathi ...
Regards,
Sarthak

Third party remittance Error

Hi
While running the third party remittance program PC00_M99_URME - Evaluate remittance (New)
I am getting the error "No entry in table T51RK for key 00000" There is no remittance rule 00000 which I have defined. Nor this entry is present in the table. but I am getting the message
THere is one more messga e which I am getting "No entry in table 3 for key 90000001 20.06.2008"
This 90000001 entry is in the HR payee table but this entry is not linked to any of my vendor or wage types. when I delete this entry I still get this message.
Any clue ?? Is there a note ?

It sounds like you have the wage type tied to third-party remittance via table T512W, processing classes 73 and 78. Do you want this wage type to remit and it is generating an error or are you getting the error and do not intend to remit?

Adding Third Party system in PI SLD

Hello Experts,
I new to PI and would like to know, how to add any Third part system in the SLD, and
scenario where sender is ABAP Proxy and receiver is Third party system, via SOAP Adapter.
Regards,
Abhishek

hi,
How do i maintain the entries for all the component in SLD. -> generally we dont have authorizations to create Business system,products in sld.
if you have, then follow what was i posted earlier link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1?QuickLink=index&overridelayout=true
any information on IDOC to SOAP Scenario.
In R3 :
1.Craete Logical system for R3 say SAPR3
2.assign client to this LS.
3.Create Logical system for XI say SAPXI
4.create RFC pointing to XI say R3_To_XI
5.Crate port of type Transactional RFC say PORT_To_XI.... give RFC created in step 4.
5.Create Partner Profile of type LS.
Give Partner no as SAPXI (LS of XI created in step 3)
In outbound parameters add ur Message type
Double click on message type & give Port PORT_TO_XI created in step 5.
6.Create Distribution Model..... Transaction BD64
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
in ESR:
import Idoc and create everthing based on your requirement.
please refer below threads:
IDOC to SOAP scenario
IDOC to websevice (SOAP) scenario
thanks,

How to receive receipt in third-party system?

I want to send message from third-party system via HTTP-adapter and
integration server to SAP MDM. I have created outbound interface for my
third-party system, message for this system, message mapping between my
messageand ABABusinessPartner, scenario for transporting business
partner data between message interface of third-party system and MDM
interface ABABusinessPartnerIn.
On third-party system side I have developed function which sends XML-
message via HTTP protocol to SAP XI integration server (to HTTP-
adapter). I want to receive delivery acknowledgement in synchronous
mode (in same HTTP session). I want have delivery result
(delivered/undelivered) in my third-party system.
Because ABABusinessPartnerIn is a asynchronous interface then I can't
use HTTP synchronous mode (parameter &qos=BE).
Whether I should use the sync/async gateway?
Message was edited by: Eugeny Balakhonov

You can see the stocks with mvement type 101-O for that material

Third party Certificate not showing up in SQL configuration manager drop down box

Hi,
I have an SQL instance that needs to use a third party SSL certificate for all communications to that SQL instance. I have installed my third party certificate via MMC and it is showing under the Personal Folder.
However, when i go into the SQL configuration manager and right click the instance name > Properties > Certificates, it is not showing in the drop down box.
I am currently using MS SQL Server 2008 R2, which is installed on Windows Server 2012.

Hi,
If the certificate cannot be used for SQL Server and hence will not be visible in SQL Configuration manager. Check the validity of the installed certificate. It may not has the correct DNS name.
I suggest you request a new third party certificate from the vendor with the correct DNS name. Install it on SQL Server environment, then you should see certificate form the configuration manager dropdown box.
Thanks.
Tracy Cai
TechNet Community Support

Re: Third Party Handler via Visual Basic

Similar Messages

Maybe you are looking for