Re: This is so basic I'm embarassed to ask. I don't understand Y0 and dY?

( sorry if it's posted twice, it didn't seem to get through the first time)
Hi,
The problem might be, that the precision of the x-scale is default 1
(e.g. -0.01 gets 0.0). Put it to 2 (e.g. -0.01 stays -0.01). Then it works
fine.
Regards,
Wiebe.
>
> "abarkan" wrote in message
> news:[email protected]..
> > After using LabVIEW for 4 years, I'm so embarassed to admit I don't
> > get Y0 and dY (and X0, dX). Just now, I was trying to make the y-axis
> > on my chart read from -0.01 to 0.1 in 0.01 steps (so -0.01, 0, 0.01,
> > 0.02, 0.03, ... 0.1). But I can't!?!? It seems to me that I should
> > make Y0 = -0.01 and dY = 0.01, b
ut this doesn't work. I've tried
> > numerous things, and I've played this game numerous times in the past,
> > but always I had to give up. How can this trivial task be so elusive?
> > [email protected]
>
>

Also, your chart should be large enough to print all labels. If you don't have enough space, choose the STYLE with all markers and min/max limits. If you need some other labels (except min/max), use Marker Spacing Arbitrary and a combination of labels+markers will fill the available space.

Similar Messages

I am getting a warning sign related to console and a terminal box with _ both in my dock. There seems to be a log associated with this veing taken in fractions of a second. I don't understand what is going on. Can anyone help?

I am getting a warning sign related to Console (9y7:36) and a box with >- related to Terminal in my dock. Also when I click on terminal there is a heading "bash 80 X 24" after my name in favourites. Can someone give me any idea what this could be about? Thanks in advance.

So far, you have described the standard Dock symbols for Console utility and Terminal Utility.
If you did not deliberately add them to the Dock, something you did seems to have opened these two Applications so that their icons are showing on the Dock.
That may be perplexing, but is not a cause for alarm.

I have, by mistake, caused all my photos in a large book I am making to revert to the original. This after a long time spent editing etc. I don't understand how iPhoto library works. I have aTime Machine. I also have an EHD backed up 2 days ago.

Yosemite 10.10.3
i am making a photo book with iPhoto, had already started it when Photos superseded iPhoto so I carried on. Have spent a lot of time on it, it's a large book.
BY mistake I caused all the photos to revert to original.
I have Time Machine and I backed up Photolibrary to EHD 2 days ago.
BUt it I don't understand iPhotos library. If I replace existing library from Time Machine, all my projects, albums etc. be there as they were before my BIG mistake?
I have read that Time Machine is not suitable for back ups of iPhoto so should I try to use my EHD? In finder it just shows 'iPhotoLibrary'. So the same question arises - does the Library incorporate all my projects and the work I've done on them up to the date of back up?
I would be so grateful for help and advice

See my response to your duplicate post.

HT1311 I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

http://support.apple.com/kb/HE36
Regards.

This may seem basic, but I just discovered that I do not have a share button (the thing with the little arrow popping out) to the left of my address bar on my Mac. I do have one on my IPad and really like it. Why don't I have this on my Mac?

This may seem basic, but I just discovered that I do not have a share button (the one with the little arrow jumping out) to the left of my address bar on Safari for my Mac. I do have one on my IPad and use it often. Can anyone tell me why my Mac is missing this icon and how to get it? Thanks.

lawrencefromgettysburg wrote:
I went in to do the software update, and learned that my software is up to date.
Going from Lion to Mountain Lion is considered an upgrade (because it is not free), not an update.
So yes, given that you have Lion, you are up to date. But if you can, you might consider going to Mountain Lion for a fee.
Here's what you need to do the upgrade:
System requirements for OS X Mountain Lion

Hi, sorry this is so basic, but how do I stop certain applications starting automatically on startup?

sorry this is so basic but how do I stop certain applications starting automatically on startup?

Is this for a computer model or an iDevice model? If the former you've posted in the wrong forum. But here's the answer.
Open General preferences in System Preferences. There are two options you can check that affect this behavior:
Check the boxes you thing you prefer. When you next shutdown the computer you should be asked in a dialog about reopening applications on restart. Select the option to not reopen.

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (how to remove?)

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep after I installed it, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (and how to remove that?).

Welcome to the Apple Community.
The Apple TV will put itself to sleep. I'm not sure what you needed to log into again, but you shouldn't have to. Do you have a little more detail about what happens.

Some telephone numbers only stay visible for a second or two, refreshing the screen brings them back but again for a second ie too short to note down. How can I stop this (use Vista Basic on laptop)?

When searching for numbers on a business website quite often, though not always, the telephone number only appears very briefly. Copying the web address on to Internet Explorer the number stays visible. Only happens on telephone numbers not for any other info eg email address.
Have no idea why this happens as it appears to be random though it must relate to how a website is viewed. Wouldn't where to start to fix this!

Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version (6 U22).
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version (10.1 r85).
*http://www.adobe.com/software/flash/about/

You don't have Add and Customize Pages permissions required to perform this action - but i do!

Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!

Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine.

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

I'll ask this again. I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize. Can anybody help? Basically LR is useless, it has been nothing but problems.

It would probably be better to continue your previous thread on the same question than to start a new one.

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and I give myself permission. What can I do to save the file?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and give myself permission. What can I do to save the file? This is the user's PC, licensed PS CS5 software and Win 7 OS.

Temporarily save to another folder, until you figure it out.
Just because you are the owner and are the sole administrator, does not always guarantee that you have permission. There are several folders that you can not access no matter how hard you try. As for folders in your document folder, it is more likely a basic permission setting that took on permissions of a copied file. Some folders and files are set to a child/parent default setting, meaning the child folder/file (the one you are accessing) has the identical settings of its parent and when the parent changes, so does the child.
You can alter the parent or the child folder/file.
Right click on the folder/file select properties.
Click on the security tab.
Click on each of the group names and see what permissions are set.
You can then edit a group if necessary.
If it will not allow it, you may need to use the advanced button to create a new copy of the group which should happen when you alter its settings (In other words, you don't have to physically create the copy, it does it for you when you OK the changes)
The administrator should have full access to the folder in the documents folder, if you are listed as an associate of the administrator group your name should also be listed there with full access. The System should also have full access.
All other groups should have reading access only if they exist.

I tried asking before, and the answer I got took me to place, but nothing was there. Basically, clicking my bookmark tab or the star as NO affect, and I cannot bookmark.

Basically, clicking my bookmark tab or the star as NO affect, and I cannot bookmark. I am about ready to just ditch firefox all together. Can someone help? I want to keep it, cuz it's the fastest, but I want my normal funcitons to work, or it's pointless.

There 5 ways to save a new Bookmark in Firefox: 
1. {Ctrl + D} 
2. Right-click and select Bookmark this Page. 
3. Bookmarks > Bookmark this Page 
4. Double-click the Star that is on the right side of the Location bar. 
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder.) 
5. Letf-click and drag the website image ''(Favicon)'' in the URL bar (or on the active tab) into the Sidebar view of Bookmarks {Ctrl + B} 
or to the Bookmarks menu bar item ''(the drop-down will open)'' and then onto the drop-down listing of your bookmarks and folder of bookmarks ''(folders will open)'' 
or onto the Bookmarks Toolbar - the new bookmark will be saved when you release the left mouse button

HT4864 I really don't understand much of this article....

I really don't understand much of this article....but would simply like to know whether I can haul in mail I receive to my gmail and/or hotmail accounts. Many thanks.
Emile

OK. Many thanks for your quick reply. My son has been trying to talk me into using iCloud for all my mail necessities on the grounds of "why have a Mac and use non-Mac programs....?" My counterpoint is that I happen to have Mac/Apple Mail bringing in my work mail from my university server; I have Hotmail which I use for certain purposes and gmai that handles my more personal mail. To simplify matters, I just open gmail which I have set up to pull in my work mai, my hotmail messages and, of course, my gmail messages...all with one click, basically. This, among other things, allows me to to see my work mail when I am not in town.
Your answer, unless I misunderstood it, tells me that I cannot do the same with iCloud, so thanks for clarifying this.
Emile
Message was edited by: nucho

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Re: This is so basic I'm embarassed to ask. I don't understand Y0 and dY?

Similar Messages

Maybe you are looking for