Re : To find the list of program in which partcular include program is used
Someone could tell me the function module through which it display the list of program in which a particular include prgram is used.
thanks in advance
Neeraj gupta
Neeraj gupta,
This is SAP Business One Core forum. Dedicate to SAP Business One - a solution for SME. Please close your thread since this forum is not related to you.
Thanks,
Gordon
Similar Messages
-
How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?
Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj -
To get the list of queries in which a particular variable is used - urgent
Hi Friends,
I have a list of variables which were used in some queries, now I need to know list of queries in which the given variable is used.
for example: There is a variable called ZVBASMNT and used in some queries, I want to get the names of the queries in which it was used.
please give some short method for this, if there is any table or Tcode for this please provide, its bit urgent.
Thanks & points will be given for the helpful answer
Regards...
GaneshDear Ganesh,
Yes, You can find.
Goto Metadata Repository in RSA1.
Click on Query
Selct / Click on a Query which uses your variable ZVACITY
Click on your variable
Just observe the USED BY list.
Regards,
Ram. -
Where can i find the list of macros
where can i find the list of macros and which macro is used for exception ?
You answered yourself???? :-):-)
Anycase you can refer the pages under the following link.
http://help.sap.com/saphelp_erp2004/helpdata/en/c5/e4ad64453d11d189430000e829fbbd/frameset.htm
Thanks,
Prasath N -
Where do I find the list that loads the programs at start-up so that I can disable some.
Where do I find the list that controls the program loading at start-up. Also how do I know which ones I can disable. I am trying to speed up the start-up process.
See http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autotruns
-
Want to find the list of Thermal Printer pass the MFI program!
Want to find the list of Thermal Printer pass the MFI program!
Did Apple have any list list out the Device which pass the MFI program? I want to find some Thermal Printer pass MFI.
Thank you very much!!!^^Must be a fairly short list - world's first reportedly released just 8 weeks ago...
GeBE-FLASH® for iOS: Thermal Printer Innovation for iPhone, iPod ... -
How to find the list of queries containing a Particular Infoobject
Hi all,
I have requirement to find the list of queries and workbooks which contains a Particular Infoobject. Please advice is there any Database table or Programs exists to find..
Thanks in advance
GAMY..Hi,
Thanks for your replies.
I have tried the oprion already..(RSD1 > Type in the name of the InfoObject and from the menu Edit > choose Where Used list.) but no use. It doesn't show the list of queires..It shows only the data targets.
I would like to know is there any table to achieve the requirement.
Thanks in advance
Ganesh(GAMY) -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
To find the list of Inactive objects in the Production system.
Hi Experts,
Need a help. I want to find the List of inactive objects in the Production system. Do we have any standard program or any transcation code to find.
Appreciate your help.
Thanks,
Venkata.ACheck below threads -
Check Inactive Objects in System
Need program to find the inactive objects
Tcode for finding out the inactive BI Objects -
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
Is there a way to find the list of PCs and iDevices connected to my Itunes Match?
-
How to find the list of existing tables in a schema using DB link?
Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link? -
Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PMI was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi -
How to find the list of users loggin through HTTP session
Hi All,
we are using SRM 5.5 system with ITS. I am able to find the list of concurrent users from ABAP level using report "CCUEVAL" but how do I know the list of concurrent users logged in from HTTP session?.
could you please let us know the SAP note number or any report?
Thanks in advance,
Mohan KarriHi Uday,
thank you very much for your prompt response.
I need a report because by end of every month I would need the average peak http users list for the reporting month.
or tell me how to find " how many users logged in through HTTP session in a day?"
Thanks
Mohan -
Query to find the list of users having access to a particular scenario
Hi,
I am learning Hyperion Planning 9.2 x version. I wanted to know the query to find the list of users having access to Plan Iteration - 1 scenarion.
As I am new to Hyperion Essbase and Hyperion Planning, I am assuming these ideas work out to get the desired result.
1) As Hyperion Planning uses Relational DB to store the User Security information, we can query the list of users who is having access to Plan Iteration - 1 Scenario.
I am not sure if this solution works. Please correct me If I am wrong.
2) We can also query from the essbase editor to find out who all having access to this scenario.
If the above is correct, can you please provide me the query.
I am really need of this and I will be happy if any one provide the solution.
Thanks & Regards,
Upendra. BesthaHi,
If you are looking for some SQL to retrieve the access rights by member then you can use something like (SQL Server code though can easily be modified for Oracle)
SELECT usr.object_name as Username,mem.object_name as Member,
'Access Rights' = CASE acc.access_mode
WHEN -1 THEN 'None'
WHEN 1 THEN 'Read'
WHEN 2 THEN 'Write'
WHEN 3 THEN 'Write'
ELSE 'Unknown' END,
'Relation' = CASE acc.flags
WHEN 0 THEN 'Member'
WHEN 5 THEN 'Children'
WHEN 6 THEN 'Children (inclusive)'
WHEN 8 THEN 'Descendants'
WHEN 9 THEN 'Descendants (inclusive)'
ELSE 'Unknown' END
FROM
hsp_access_control acc, hsp_object mem, hsp_object usr
WHERE acc.object_id = mem.object_id
AND acc.user_id = usr.object_id
AND mem.object_name = 'Plan Iteration - 1'
Cheers
John
http://john-goodwin.blogspot.com/ -
How to find the list of transaction code based on a field ?
Hi Gurus
I have a unique requirement.We are adding a new field into our system and want to know which all t-code contains that field ? So that we can update the user training manual. Can some one tell me the ways and means of finding the list of all the t-code ( or where used e.g functional area ) based on " a field" ?
Thanks in advance
SNHi,
1. Tcode KS02.
2. click on the text "Cost Center"
3. hit F1
4. Click on the technical information
5. in the next screen double click on Field name :KOSTL
6. Select the row for the component KOSTL
7. Click on the display list
8. In the next screen, in the object name:KBAS
Drilldown to transactions.
Here you get a complete list of the transactions.
Hope its useful.
thanks.
Maybe you are looking for
-
Unable to install Creative Cloud Updates
Adobe Illustrator CS6 Update (version 16.2.0) There was an error installing this update. Please quit and try again later. Error Code: U44M1P34 DW CS6 12.1.1 Creative Cloud update There was an error installing this update. Please quit and try again la
-
Add logic to Submit button in web form
We have created a form from scratch in FormsCentral. It has a fair bit of logic associated with questions in the application form. Some of the logic leads to the end result that an applicant should not be able to submit the form. The issue is, that a
-
Including Vision M in PC music libr
Is there any way that I can consolidate the tracks on my Zen Vision M into the 'PC music library' WITHOUT the files being physically copied to my hard dri've. At the moment I have to access tracks by selecting the Music directory on the Zen Vision, a
-
Some software(iphoto,imovie) can only be opened by safe boot.
I buy a mac book air (MD231),i upgrade the os to os x mountain lion 10.8.1,but i find that some softwares can not be opened, such as iphoto,imovie,chrome for mac,but others are normal,I try many methods to solve,but all be failed. Then use "safe boot
-
Test ACS SE / Remote Agents
We are deploying two new ACS SE's using RA's talking to AD. These will be used for PEAP authentication of wireless users. I was wondering if there is an easy way to test user authentication so that I can verify the Remote Agent is talking properly to