Re: Toshiba system driver don't execute after instalation

toshiba system driver don't execute after instalation in windows 8 64 bit

Hi
I dont have this notebook model but if you try to install own Win8 version please install all stuff following this install order:
Windows 8
Intel RAID Driver
Intel Chipset SW Installation Utility
Intel Management Engine Interface
Intel Rapid Storage Technology Driver
Intel Display Driver
NVIDIA Display Driver
Realtek Audio Driver
Intel Rapid Start Technology Software
SRS Premium Sound
Realtek Card Reader
Realtek LAN Driver
Wireless LAN Driver
Intel Wireless Display
Realtek Bluetooth Filter Driver Package
Synaptics Touch Pad Driver
TOSHIBA Flash Cards Support Utility
TOSHIBA System Driver
and so on.
Toshiba system driver can be downloaded from here .

Similar Messages

Seagate external hard drives don't work after installing Mavericks 10.9

I have a 3 year old MacBook Pro. I upgraded the system to OSX Mavericks 10.9. Since then my computer does not recognize any external hard drives. I have a 1 TB Seagate external drive and a Seagate Free Agent 750 GB hard drive and my mac does not recognize either of them. Prior to the upgrade my Mac could read and write to the drives. Below is the message I receive when I plug in the 1TB hard drive.
The NTFS volume that you're trying to mount (/dev/rdisk3s1) has not been unmounted properly.
This may mean that the volume is in an inconsistent state, and mounting it with NTFS-3G could lead to data loss. You are recommended to attach the drive to a Windows computer and unmount it properly with the "Safe remove hardware" feature to guarantee the safety of your NTFS volume.
Please help.

Have you tried the recommended steps? If the Windoze machine won't allow you to safely eject, restart the computer and try ejecting again.

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

Call an executable after Installing an application.

Hi..
I am using Labview 7.1 application builder to build my application. In that one, one option is there to call one more executable after installing this application.(Installer settings/Advanced/Run after installation). But I am trying to call one more exe which is built in Labview only. But it is not working and not giving any error messages. Please let me whether it is possible to call Labview exe in this manner.
Thanks in advance

Hello,
It's been some time so I'm not sure you still need this help. In any case, the executable that you want to run after the installation must be an LV executable and you don't have to forget to add it in the Installer settings->Files. You don't need to use the full path but the name of the executable must be right spelled.
I use that option to configure the Registry keys that will determine how the main application will run. I compile the Configuration program in the Application Builder and when I compile the main application, I include the executable and make it run with the installation.
I have one problem though. I also install the Configuration program in the group so the user can run it later if he needs so. I have two main applications that can run in the same computer and both use, and add to the group, the configuration program. My problem happens when I uninstall one of the main applications. It uninstalls the Config. program although the other main application is still there. I expected that the system would know that there's still at least one application that needs that tool, something like the DataSocket tools that are uninstalled only if you uninstall all the applications that will use them.
If you have any questions or comments on the original issue, please let me know.
Thanks,
Marce

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Buit in ethernet don't work after installing Lion

Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
Someone else has the same problem?
On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
Is there somebody who has te same problem and has a solution?

Something does look odd to me unless it's a typo in your post.
This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
I work with a modem with te folowing preverences:
Wan IP address    87.211.205.210
Lan IP address     192.168.1.1
Primery DNS server       62.58.50.5
Secondary DNS server   62.58.50.6
and a separate router Netgear WGT624v3
This is not exactly what I would expect from System Preferences/Network
the system preferences for the network are
Configure       by DHCP
IP address     192.168.1.15
Subnetmask 255.255.255.0
Router           192.168.5.1 <<<<<<<<<<< this should be 192.168.1.1??????
DNS              208.67.222.222
                     208.67.220.220
The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
If this is not a type then this is a problem!
Not sure how it got to be that way.
Does it persist when resetting the modemand router?/
Steve

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

"System extension cannot be used" after installing iTunes 11.4

Installing latest version of iTunes (11.4) today led to the following error message:
System extension cannot be used
The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
I'm able to use my USB drive for Time Machine, and that appears to be functioning ok. Why this error message? Anyone else had it? And what does it mean for the continued safe operation of my MacBook? Would be reassuring to know if this is happening for anybody else, and if anyone else has found it affecting them. (Other than the distraction of getting a worrying error message that I take time out to report?)
Thanks in advance.

the "//System/Library/Extensions/AppleUSBEthernetHost.kext can just be replaced to overcome the problem as indicated below. Mine was dated 2012 and after the latest iTunes update, stopped working. I noticed this as my personal hotspot connection between my MacBook Pro and my iPhone failed (I use the USB cable for this). To overcome the problem, first unlock the //System/Library/Extensions/AppleUSBEthernetHost.kext file, then drag it to the waste bin and empty the waste bin. Then download iTunes and reinstall-you don't have to remove anything-just reinstall. This will put back a newer //System/Library/Extensions/AppleUSBEthernetHost.kext file dated 2014. After this, restart your computer and it should now work. I checked the personal hotspot connection via my USB cable and this is what I'm using now writing and posting this. So Good luck. Hopefully Apple will fix this bug in the next update.

Touchpad hot-keys don't work after installing Wii XP on Satellite A200-1HV

Synaptics hot-keys after installing WinXp doesn't work.
http://i043.radikal.ru/0805/c5/09a7324bc1d2.jpg
On Vista i touch "Two arrows" touchpad lite up blue colour but now this does not happen.
I installed driver from Toshiba web-site for Win XP.
How to on hot-keys on touchpad?
From Russia with love = )

May be i said not good, about problem? I will try tell about my trouble. In Windows Vista Home Basic, when i touch "2 arrows" (You can see it, on screenshot, in up-right angel), after that, touchpad Began fluoresce by the blue colour, and after that i push 1 button from 6 buttons on touchpad (they all in red circle) and starts tha application. But no, when i touch "2 arrows", nothing happened. Is it information help to solve problem?
P.S. I try phone to Support, but, now in Russia we have holidays = (
Sincerely your JIABP.

Don´t start after install bios ACPI Flash BIOS version 2.00 for Satellite A215 (PSAFGU/PSAFHU)

After install this update doesn´t start anymore
it´s possible to install the previous bios?
Thank you

Phoenix BIOS Recovery by PETAR
Update: Boot-Block Jumper
http://rapidshare.com/files/14946637...ock_Jumper.pdf
This is the latest PHLASH16 I could find:
http://rapidshare.com/files/15674471...6.5.4.rar.html
Tool provided by @offon7544
Here is the Archive with all the files needed and How to for Phoenix BIOS Recovery.
Method 1.
http://www.box.net/shared/j2u98ci67f
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F)and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 2.
http://rapidshare.com/files/105952250/Metod_2.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 3.
http://rapidshare.com/files/105952818/Metod_3.rar
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 4.
http://rapidshare.com/files/105953337/Metod_4.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
The HP Tool is located in the archive of the first metod.
Use the metods in order form 1 to 4, unless you think otherwise...
Hope you never use this and if you ever have to GOOD LUCK.
Insyde Recovery
INSYDE BIOS RECOVERY METHOD added 28/11/2009
http://forums.mydigitallife.info/showthread.php?t=13095

Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

*Help*! After installing itunes 8 my CD/DVD/RW has been disabled.
This has happened before and I have restored it by deleting the upper and lower filters in the Vista registry but then itunes tells me that "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." and I am unable to burn anything from itunes.
Does anyone out there know how to restore the CD/DVD/RW drive and retain the full use of itunes please?

Have you tried to reinstall iTunes?
Reinstall the old iTunes, reboot the computer and clean by using CCleaner. Then you can install the newest version of iTunes.
If it doesnt work try to remove the upper- and lower filters again. Maybe you should do this after you have reinstalled iTunes.
Last but not least, this could be useful for you:
http://aps2.toshiba-tro.de/kb0/TSB84026P0000R01.htm

Volume buttons don't work after installing ios 7.0.4

I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
Any ideas on how to resolve this issue?
Thanks

I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

HT204408 FaceTime on imac don't work after installing mavericks, After log in it says: check internet connection and try again.

facetime stops working after installing mavericks. After login it says: check internet connection and try again. My internet connections are ok, I have both wifi and lan.

Please describe in detail what happened when you took all the applicable steps in the support article. That's the starting point for any further efforts to solve the problem.

Re: Toshiba system driver don't execute after instalation

Similar Messages

Maybe you are looking for