Re: TP Link TL-WA730RE

I recieved my TL-WA730RE y'day and eagerly set it up with my HH 3. I tried setting it wirelessly as recomended in the easy(!!!) set up guide, however it wouldn't connect to my hub, so i went down the hardwire route with the manual set up. This seemed to work and m yipad did indeed log on to the repeaters signal, however i couldn't connect to the internet via this signal.
it looks to me like repeater has somehow captured the setting of my homehub but isn't actaully conencted to it.
If i follow the site (http://forumhelp.dyndns.info/wireless/wireless_boost.html), will this help me, can't actuall access it from work so can't verify.
I did manually last night try to access the repeater and play with the settings to turn it in to an access point, not sure if that was the right thing to do or not, but after that it just lost it's connection with the HH. Also before i turned off my home hub, when i typed in the repeaters IP address it would link me to the HH, so somewhere it felt like the repaeter weas getting muddled?
Has anyone else had this sort of issue, begining to wonder if i should have just soent a bit more on a belkin or netgear one that creates it's own new network name diff to that of the HH automatically?

The updated link is shown below. But you will have to wait until you get home to access it.
Increasing wireless range using a TP-Link TL-WA730RE or a TL-WA701ND (version 1 only)
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

TP Link TL-WA730RE

Hi
I followed the instructions (http://forumhelp.dyndns.info/wireless/wireless_boost.html) to setup TL-WA730RE as an access Point and ran an ethernet cable to it as it is in a room without any wireless signal - completed the instructions and loaded the access file etc and changed password to my own - however when I try to connect by wireless to my laptop or smartphone I keep getting asked for APmode passwod - it wont accept the password that I choose - should I have entered my homehub admin password or wireless key into the TL-Wa730Re - any advice would be appreciated.
Solved!
Go to Solution.

If you are setting it up as an access point, then you need to change the wireless SSID, channel and password, to one of your own choice, and not the one shown in the default config file.
Make sure that you use a channel which is at lease two channel numbers away from the home hub.
If you go to http://192.168.1.15 you can select the options from the wireless setting menu, as shown here.
apmode3
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Download error in (osx) adobe desktop app (corrupted download link).

Here is a discription of the problem. Please consider that some of the wording might not be correct, as I do have to translate the error message from German into English.
Using OSX 10.9.2, when clicking inside the adobe desktop app (top of the screen bar) on the tap "apps", the following screen (screenshot) appears, which states, translated from top to bottom:
download error
download error. Please contact support.
(link) contact support
(link/button) download creative cloud -> This button unfortunatly leads to the following error page "http://www.adobe.com/special/errorpages/404.html"
All apps, like Bridge, Photoshop, Lightroom, etc. are installed and work just fine. So no problem here. I seem however unable to redownload the desktop app (in order to reinstall). As stated above the provided link inside the desktop app itself is coruppted and within the (online) web-based download centre (user logged in) I am only adviced to use the desktop app. This is a dead end and I do not know what to make of this error, let alone solving it. Please help!

I am sorry Romsinha but this doesn't really help.
I already restarted the desktop app and while I am obviously online and connected the problem (error message) remains the same. Information within the "home" tap is recieved/loaded (little blue spinning wheel) stating that various apps recently have been updated. Yet the same loading wheel within the "apps" tap results in an error. My best guess is that some internal link within the app is corrupted, leading to a source on a server that can not be reached.
UPDATE
I clean uninstalled adobe creative cloud as discribed in the article you provided (using the cleaner tool) and even uninstalled the browser plugin. After downloading and reinstalling creative cloud the problem however remains the same. "Apps" tap still shows the same problem. "Home" tap now displays the following:

Barra de Navegação cinza e preta encobrindo o link, como resolver?

Instalei o Kubuntu 14.04 e, após a atualização do sistema, na barra de navegação do Firefox os links ficam encobertos pelas cores cina e preto, impedindo a leitura e atrapalhando a navegação.
Mudei o esquema de cores padrão do sistema, e alterei o tema Gtk mas não resolveu.
Desinstalei e reinstalei o Firefox mas o problema persiste.
O que pode ser feito?

Hmmm,
# Na [[Location bar autocomplete|barra de endereços]], escreva '''about:config''' e pressione '''Enter'''. É possível que o aviso ''''Isso pode anular a garantia!'''' apareça.
# Clique no botão '''Serei cuidadoso, prometo!''', para acessar a página about:config.
# Procure por '''gfx.xrender.enabled''' e mude seu valor para '''false'''.
# Reinicie o Firefox.
Ou tente user o Tema [https://addons.mozilla.org/pt-br/firefox/addon/fxchrome/ FXChrome]

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Links default to wrong folder

Why is it when I go to relink a placed image in the Links pallette it always directs me to the wrong folder (not the one the image lives in but elsewhere). I believe that it is taken me to the last folder I navigated to. thoughts?

You now have a prefernce for where relink goes, the last folder you used to link, or the folder where the original link resides. It's in the prefs.

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

You've probably found an answer to this by now, but I think this has been addressed in another forum -- The link below suggested using a button and adding the tooltip to the button.
https://forums.adobe.com/thread/304974?start=0&tstart=0
Sounds like it would work but I haven't actually tried it.
Good luck~!

Auto-generated links exported from InDesign do not work in tablet apps

Hyperlinks automatically detected and exported from InDesign CS6 8.0.1 as a PDF work fine on the desktop version of Acrobat Reader. However, on the iPad version of Adobe Reader as well as iBooks and GoodReader, these links are completely ignored, meaning they are just text.
On the other hand, if I was to manually set the hyperlink in InDesign or Acrobat, the link works fine.
It would be extremely tedious and time consuming to manually reset hundreds of hyperlinks in my documents since InDesign use to handle this correctly.
Is this a bug? If so, it's pretty serious and should be Adobe's priority to fix since millions of people read documents on tablet devices.

No, it's a Feature of Acrobat and reader that they attempt to create links from anything that "looks like" a URL. Other readers lack the feature.
It's not good practice to depend on this in any case as it's hardly foolproof even in Acrobat. Links that break across lines, for example, will not be properly recognized.

How to link excel workbooks in Sharepoint?

I have a master Excel spreadsheet and other sub excel spreadsheets (all on Sharepoint) that are linked to each other (copied data from one and pasted link to other) so that the Master spreadsheet auto-updates every time a sub document is modified. This
format works if the documents are hosted on my computer, however, the links become broken if they are hosted on Sharepoint and I get a #REF! message. My goal is to have a master document that is linked to data of other sub spreadsheets and auto-updates when
they are modified without having to open the sub spreadsheets. I would like to be able to open the master document, refresh it, and have the current data pulled from the linked sub spreadsheets. Any suggestions on how I can do this?

I have seen this working for some folks in my company. They moved their spreadsheets into SharePoint, and changed the references to other spreadsheets from file paths to be the urls of the items in SharePoint.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

Creating a Link to a Folder on a Server with Sharepoint Foundation 2013

Hi All,
I am looking to create a link from a page on my Sharepoint site to a folder on one of the companies servers. I have had a lot of trouble with this.
Is there a piece of code I can use to do this?
Thanks in advance.

Ahh. You are using SharePoint Foundation. Yes in that case you would not have that feature.
That makes your requirements bit tricky given I verified creating this link without Publishing feature activated and it did not work and hence I tend to believe that it would not work in your case without that feature.
What you can try is drop the page viewer web part and try configuring it to open your file share and see if that helps. I do not have Foundation otherwise I would have verified this before posting but give it a try and see if it helps.
http://neelb.wordpress.com/2011/09/16/displaying-a-web-site-or-file-or-a-folder-in-the-page-viewer-web-part/
Amit

After delete file from documents the direct link still alive.

Hello.
I upload a image to the style libary folder, then i publish the file and delete him BUT the direct link to the image still work.
I try to upload anther image with the some name but when i try to browse the direct link i get to deleted file.
If i upload a image and delete it before i publish the file I don't have this problem.
I try to flush the blob cache with this commends:
$webApp = Get-SPWebApplication "<WebApplicationURL>"
[Microsoft.SharePoint.Publishing.PublishingCache]::FlushBlobCache($webApp)
Write-Host "Flushed the BLOB cache for:" $webAppbut this doesn't work.I clear the cache on the local pc and doesn't work to..Any idea someone?Thanks!

Hi,
To check if there is cache issue, please access the url in another PC to see if the issue persists. You could also open style library in SharePoint designer to double confirm it.
In addition, if you click the ellipsis of the image item, there will be a preview panel to show the picture, is it the newly upload one?
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problem with links in deployed ADF application to Weblogic Server 11g

Hi everyone !
I have a query here, firstly, I have created an ADF application using Jdeveloper 11g and have successfully deployed (EAR file) onto the weblogic server.
However, after testing out the application, the linking within the application does not seem to work. Whenever I click on a link or button, the page refreshes but the result is not displayed.
What could have cause the problem?
Thanks
Gavin

Are the ADF runtime libraries installed into the WebLogic server?

HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

I used to be able to open links in a new tab by clicking my middle mouse button, but now that I've updated it to the most recent update it doesn't work anymore. How do I fix this? I really love that feature. It works in IE and Chrome but not Mozilla.

Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

When clicking on links that open in a new window, the links don't open and Firefox freezes in a way. I can navigate the page I am on but cannot click to open a new tab or bookmark.

When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

Re: TP Link TL-WA730RE

Similar Messages

Maybe you are looking for