Re: Transport Request Missing Very Urgent

Hi Peers,
One of my transport request is missing. I had configured in Dev client and the same configuration has been transported to Sandbox, because of Abap programs.
All the configuration which is there in Dev has been copied to Sandbox & I am able to see all my config.
Now in Testing also all my requests has been copied from Dev. But One particular request is missing and I dont remember the request name & number.
I have checked in SE10 also but No Luck not found my request.
Kindly requesting all of you to immediately give your valuable inputs.
Regards
Pavani

Hi Ruchit,
Thanks for the immediate response.
I had gone to SE03 but not able to find out PGMID & Object type & name????
I am a functional consultant so does not know about these terminology, can you tell me in detail vt needs to be done? My only worry is I had created some 1200 positions in that particular request. If I did not find out again I have to redo the same.
Can you please kindly help me out what needs to be done?????????
Regards
Pavani

Similar Messages

Adapter type missing - very urgent

Hi all,
We have installed PI 7.0, SP12. when we click on the adapter type in the integration directory - the window is empty. we have a central SLD which is solution manager. we have imported the sap basis content 7.0 and 7.1.. is there any other configuration that has to be checked
Very urgent
Regards
Arun
Message was edited by:
        Arunkumar sukumar

When i check in the RWB, the adapter monitor shows an error in
---> Adapter Engine MXD (mbixidev)
        http://sap.com/xi/XI/System
    JPR - this shows an error in it and says -
SLD access SLD host:port = 10.10.40.197:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for MXD.SystemHome.mbixidev found
No access to get JPR configuration
Regards
Arun

Problem in transporting the objects(very urgent)

hello Experts,
I have saved my tables , domains,data elements and programs in local object.Now i want to tranport into production server,For that i have to save this objects in some request.How to do that.Please give me the solution .
Thanks in advance
regards,
Ashok.

hi,
Please follow below steps to handle the same:
1. Go to Transaction: SE10.
2. Create a new workbench request by using key F6.
3. Double on the newly created request
4. Add a new entry: R3TR,TABU,<table> for Program Id, Object Type and Object Name Respectively.
<table> being the table name for which the contents are to be transported.
5. Click on Function icon next to table name.
6. Click the contents from the icons in next screen.
7. Select entire table.
8. In next screen we can select required entries to be transported.
9. Come back and save.
10. Now release the request and transport to the required server.
Rgds
Anver

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

ORA-04062 - very urgent, please help

Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
I have the master database:
db_master
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
and replica database:
db_replica
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
the master and replica databases are installed at different hosts
At db_master:
1. I create table TEST
CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
2.Then create materialized view log on TEST
CREATE MATERIALIZED VIEW LOG ON TEST;
At db_replica:
1. create dblink MASTER to db_master
2. create materialized view
CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
At db_master:
1.Insert some test values to TEST
INSERT INTO TEST VALUES (1);
INSERT INTO TEST VALUES (2);
INSERT INTO TEST VALUES (3);
COMMIT;
At db_replica:
1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
begin
DBMS_MVIEW.REFRESH('MV_TEST');
end;
sometimes (not at every call the below error callstack appears)
17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
17:07:22 ORA-06512: at line 4
Please, help me solve this problem, what cause ORA-04062?

Zjawka,
This forum doesn't consist of paid support personell.
Labeling your request as 'very urgent' must be considered rude.
If you would have looked up the error at all in the online documentation,
you would have got:
ORA-04062: %s of string has been changed
Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
Action: Recompile the caller in order to pick up the new timestamp.
No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
Sybrand Bakker
Senior Oracle DBA

Transport Request's stuck with TRUCK symbol - very Urgent

Hi All,
I am in the process of Importing 450 transport request's. I have imported 190. While importing next 30, it stucks at importing stage with TRUCK symbol.
Please suggest, how to overcome it or how to reset the tp.
Thanks,
Arjun

Hi Arjun,
There me be various aspects of your transport being stuck. Just ensure the changes in the Transport Request are not big before taking any action. Please be informed that if you are canceling this in the middle in particular if the transport request holds some table structures, the system may mal-function. So please discuss with your development team about the same. You may need to revert the minor changes done by the transport.
1. Check for the table spaces, if any of them are full add some more space. As the transports may have stuck for the same and may go through.
2. Check if enough background process are free in SM50 for the transport jobs to run. You can check for the transport jobs status in SM37 by giving RDD* as the Job name. Look out for any of the Job over running or is in waiting status. Looks out for some remedy there. You can cancel the transports by canceling these active jobs in SM37 or in SM50.
Hope this will help. <b>Please be careful if you are really need to cancel the jobs. As I have mentioned at the beginning</b>
Regards,
Sanujit

Very urgent : Regarding Transport Request

Hi,
I have 2 development/correction's under a single Transport request, I need to delete the old correction, but when i try to delete is says cannot delete because it contains locked objects,
Please help me to delete the correction, and I want to know if I delete the old correction and continue with the new correction, what will be the impact on the program.
Many thanks,

hi Soyunee,
Please go through the following link,
[https://www.sdn.sap.com/irj/sdn/forumsearch]
hope it will solve your problem,
Reward points if usefull,
Thanks,
Kalyan.

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Very urgent: Travel Request Error in production server

Hi All,
While creating Travel request in production server, we are getting an error..
Error while writing to the database PTRV_HEAD/PTRV_PERIO/Cluster TE
Someone please help me on this. This is very urgent..
Thanks in advance!

Solved..by setting up trip number ranges..
Thanks!

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

Missing transport requests

Hi Sap-experts!
in our system is a gap btw. transport request XZ1K900500 and XZ1K904000!
the requests seem to be deleted or number range was manipulated!
where can I find these missing records ?
there's no track in table E070/1...
greetings
Andreras

ok Joe,
I've checked change documents to se16n - nothing
and analysed several tables in the same package as e070 - but find nothing!
here are some records (with the gaps) from e070
TRKORR          AS4DATE
XZ1K900021      2010/01/12
XZ1K900022      2009/09/07
XZ1K900023      2009/07/21
XZ1K900024      2009/07/28
XZ1K928326      2010/01/20
XZ1K928332      2010/01/20
XZ1K928333      2010/01/20
XZ1K935163      2009/07/29
XZ1K935164      2010/01/05
XZ1K935165      2010/01/05
I don't understand the interplay of the as4date??
it remains dubious.
thanks again all and have a nice weekend!
Andreas from germany
Edited by: Andreas Mann on Mar 26, 2010 3:09 PM

Error 12 While Transporting - Very Urgent

Hi all,
we are transporting objects from Development to Production and we are facing with an error,
Transfer structure 0UC_AKLASSE_TEXT_BB does not exist
Error RSAR 440 when handling objects with type R3TR ISTS
Start of the after-import method for object type R3TR ISIP (Activation Mode)
Start of the after-import method for object type R3TR ISIP (Delete Mode)
tried solving this problem by retransporting and by activating the structure in RS_TRANSTRU_ACTIVATE_ALL as mentioned in few posts, still we are getting the same error, unable to find out the root cause, please help me in solving this is very urgent.
Thanks in Advance,
Sai..,

Hi Edwin,
I have gone through that note already no much information available there its mentioned about service package 04 with is already available in our system, as per your second check point source system is mapped fine as we are able to transport remaining objects, actually now we started transporting objects in batch wise selecting few at a time and as its working fine with few, I dont think there is a problem with mapping. and one more error we are getting is
After transporting the objects in Production if we click infopackage,
Caution ! - The transfer method has changed
and in InfoPackage Processing level its showing
Update Data
ALE Inbox and InfoObject
ALE Inbox only
This is happening for few randomly and for others its fine with regualar processing PSA and then in InfoObject....,
Please look into this as well.
Thanks,
Sai.

Unable to Delete the Transport Request running since a long time - urgent

Hi all
I had a transport request of a DSO , which is running since a long time.
I had deleted it from STMS , & also from the tables TPSTAT, TRJOB, TRBAT; TMSTLOCKR;TMSTLOCKP
But still the entry is shown running
& because of this all my tranport work is pending , & not moving,
Can anyone help me out.
Regards,
ramesh

Hi
1. There are no more entries in TRBAT.
2. I have deleted the RDSEXCEL jobs also
3. I have restarted the Server as well. & tried to manually buffer the requests to the queue.
But still whevner i refresh the Import MOnitor, it gets hanged.
How do i unlock the queue ?

Transport Request number missing after Remote client copy

Hi,
I have done a remote client copy with SAP_ALL .but after completing client copy i can find transport request numbers are not showing (SE10,SE09) for all the functional consultants. Plese help me to solve this issue, suggest me any solution
Thanks
Jyothish

> I have done a remote client copy with SAP_ALL .but after completing client copy i can find transport request numbers are not showing (SE10,SE09) for all the functional consultants. Plese help me to solve this issue, suggest me any solution
If you did client specific customzing in those they are of course not found.
Markus

Datafile missing for a Transport Request

Dear Sir,
We created a Transport Request directly in our Quality Server and subsequently using SE10 we released the Transport Request also . However we find that there is no Data File & CoFile are found on the Quality Server for this request .
Due to this , we can not import the request in our production server also .
Kindly help us pl .
Rgds
Sonia Agarwala

Hello,
First check the type of your transport request, probably it will be a "local transport" request.
Local transport requests do not generate data and cofiles when they are released.
Probably your current TMS setup does not allow you to release transports from the QA system.
What you can always do is creating a transport of type : "Transport of copies" and manually add your objects you want to transport.
Do not forget to fill in the "target" field in your transport, otherwise when you release it it will be again a local transport without data and cofile.
[https://service.sap.com/sap/support/notes/28967|https://service.sap.com/sap/support/notes/28967]
[Local Transport|Local Transport]
I hope this can help you further.
Best wishes.
Wim Van den Wyngaert

Re: Transport Request Missing Very Urgent

Similar Messages

Maybe you are looking for